What to do when the power cord does not connect to MacBook Pro?

This morning I went to turn on my MacBook Pro and the power cord is not "lighting up".

Try a different electric outlet.
Power
The MagSafe power adaptor LED doesn't appear to indicate the correct activity.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, you have to contact Apple.
A Mac comes with 90 days of free tech support from AppleCare from the date of purchase.
AppleCare: 1-800-275-2273
Best

Similar Messages

The power cord keeps falling of my MacBook Pro?

I love my new MacBook Pro but the power cord keeps falling off and it's driving me a little crazy. It's already been replaced once so that's not the problem. If anyone has any suggestions, besides duct tape, please let me know?

Denise, the new magsafe 2 has a weaker neodymium magnet, its designed that way.
formerly too many people in coffee shops etc etc were getting their macbooks yanked to the floor on accident.
Its new design is weaker for good reason.
if it keeps coming loose youre using if your lap or in bed,...sitting on a flat surface that woudlnt happen.

HT6150 Single press of Power Button does not put my MacBook Pro to sleep after this update! Do I need to change anything in the settings? Any help please? Thank you!

The title says it all! After installing the new Mavericks update, I cannot put my MacBook Pro to sleep after a single press of the Power Button like before. Does it have something to do with this update or my MacBook Pro? Or do I have to change something in Settings?
Any help would be appreciated.
Thanks!

Send your opinion to Apple.
But remember that there are others.
A moment is a medieval unit of time equal to 1.5 minutes or 1/40 of an hour. This reckoning is derived from the work of Bartholomeus Anglicus, writing in 1240 that each hour was divided into four points, each point into ten moments, each moment into twelve ounces, and each ounce into 47 atoms.
In modern English it usually refers to "a short period of time",[2] the exact length remaining ambiguous.

Is there a way to do a soft reset when the power button does not work?

After needing to enact my replacement repair warranty, I received a device (smae one and same serial) but the screen had unresponsive spoots, and dim spots, I decided to turn right around and send it back again. I got a replaced screen again, but this time my power button doesn't work. Now, this isn't too inconvenient for me except that I cant do a soft reset or power off/on in order to clear the cobwebs from time to time. Does anyone know of an app, or another way to do this? I'm simply afraaid of what iddues it may come back with if I send it in a 4th time.
So, App?
Or, maybe a special keybaord combo I can put in like on phones? (IE ##XXXXX#

To remove the Restrictions passcode, you need to restore the phone as a new device using iTunes. Hit the "Restore" button on the Summary Pane.

How do i adjust the brightness on my screen? it's dim like when the power cord is out.

After my wife had the laptop out of the house today, I plugged it back in and the screen brightness is very dim...like what it looks like when the power cord is not in...usually, when I plug the cord back in, the screen becomes brighter...that has stopped. Any ideas to fix?
thanks.

Hi,
Here are some common ways to adjust the brightness.
Open windows Control Panel, open Windows Mobility Centre and adjust the brightness here.
On a lot of notebooks, tapping f3 will often increase the brightness ( with f2 reducing it ).
Open windows Control Panel, open Power Options, click Change Plan Settings next to your selected power plan and you can adjust the brightness here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

[svn:fx-trunk] 11541: Fix the textLayout build number that is set in the main build. xml to match what will be set when the build machine does NOT do the build

Revision: 11541
Author:   [email protected]
Date:     2009-11-06 14:29:41 -0800 (Fri, 06 Nov 2009)
Log Message:
Fix the textLayout build number that is set in the main build.xml to match what will be set when the build machine does NOT do the build
QE notes: no
Doc notes: no
Bugs: no
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/air-config.xml
    flex/sdk/trunk/frameworks/flex-config.xml

Thats good news.

How can I make my computer notify me when the power cord unplugs?

My power cord for my PowerBook G4 tends to unplug without my noticing. Is there a program I can download or can I write an script so that it makes a sound when the power cord unplugs?

That is the way Mac OS X 10.8 (aka Mountain Lion) works by default. Are you actually running that system? (See About This Mac in the Apple menu.) If so, make sure the check box in the shut down alert is checked:

What do I do when the Installations disc does not have a destination disc?

what do I do when the Installations disc does not have a destination disc?

The disk needs to be properly formated & partitioned.
Format a disk
Macintosh-HD -> Applications -> Utilities -> Disk Utility
Start up disk utility.
On the left pane view, you will see a list of all your disks. Click on the disk.
Click on the partition tab.
You will now see how your disk is currently set up. Fill in the information as appropriate. You should pick Mac OS Extended (Journaled).
Click on Options...
Select Apple Partition Map to boot a PPC.
More details on formatting.
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html

When I plug any of my phones into the computer it does not connect.

When I plug any of my phones into the computer it does not connect. I can hear a beep but that's it. I checked all of my USB cords and the same results. Normally it would download my new pictures and start charging and that no longer happens. When I plug my wall charger in the phone charges.

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

My iPod shuffle, which I prchased in 2009 only worked for a short time so I put it back in the box and just recently took it out. I will not charge and the power light does not come on. It was faulty from the start and thought I was out the money I paid.

My iPod shuffle only worked for a short time. It will not charge and the power light does not come on. Bought it in 2009. Put it back in the box and in my desk. Recently tried to get it to work again but no luck. Anyone else have this problem? Very disappointed with the product although my wifes work perfectly.

Can't say I haven't done the same kind of thing...keep finding things I had every intention of...
If you have the chance stop by an Apple Retail store and talk to them about it...they often work deals for replacement of out of warranty non-working items for prices around half price. Won't hurt to stop by and see what they will do for you.

I need to hard reset a Palm TX but the Power button does not function.

I need to hard reset my Palm TX but the Power button does not function. Is there any other way to perform the hard reset or otherwise delete all of my data?
Post relates to: Palm TX

Hi,
PowerBtn from the Canuck Software HomePage.
NOTE: This is Not a Blazer friendly download and only for downloading using a Chunky Computer thingie.
http://www.canuck-software.ca/
PowerBtn will allow you to set a HardButton to turn the TX on and off in the same fashion as the PowerButton, if you want.
This setting will remain active while 'Enable' on the PowerBtn screen is active.
The user can select 'Disable' on the PowerBtn screen.
The setting will survive a Soft Reset. (Hi PG )
If the Palm PowerButton fails completely then you will not be able to do a Hard Reset.
The PowerBtn app has a 'Hard Reset button' which you tap and after a time countdown (you can cancel in this time) it will perform a Hard Reset. This is the same as the Hard Reset app mentioned above.
The 'Enable' and 'Disable' mentioned above do not affect the 'Hard Reset button'
NOTE: PowerBtn also has a 'Program itself becomes power button' feature but I do NOT recommend you use this.
If you enable this you will not be able to change the setting or use the 'Hard Reset button' because when you Tap on the PowerBtn Icon the TX will turn Off. The only way to change the setting or use the 'Hard Reset button' would be to Delete PowerBtn then install again.
You can also turn your TX On by pushing the 5WayNav Select (middle button) to bring up the clock then double push it. The TX will stay on at the same place it was in when you turned it off, in the same way it would if you used the Power Button
All the best, woz of oz
Post relates to: Palm TX

Satellite Pro U400 sometimes freezes when the power cord is plugged in

Hello! I know this problem has been discussed here and there but I would like to open a new thread on that. Here is the scenario.
I have recently bought a new Toshiba Satellite Pro U400-247 (PSU45E) with two batteries: (a) the original one, (b) additionally purchased Toshiba genuine PA3636U-1BRL, 7200 mAh. The notebook has the latest BIOS (4.80) and the latest drivers downloaded from Toshiba and installed (ConfigFree is not installed). I am using XP Pro SP3 (clean install done by myself). Everything is working very well, except for one thing:
Sometimes (but not always), when the notebook is working on battery and I plug in the power cord, everything freezes and I have to restart. Some observations:
(a) it tends to happen more frequently when the low battery alarm has already sounded;
(b) it seems to happen more frequently with the 7200 mAh battery and less frequently with the original battery;
(c) it seems to happen more often when a USB device (e.g. mouse) has been connected with the notebook, but that is not a rule;
(d) it seems to happen less frequently when I move the USB mouse at the time I am plugging in the power cord;
(e) I have experimented a lot with Toshiba PowerSaver's settings (e.g. changed the CPU levels for my profiles) but nothing I have modified seems to change the situation;
(f) I have tried various suggestions I found on different forums, but no avail (e.g. BIOS settings);
(g) otherwise, I can say that I really have not seen a smoother computer, everything else is really working just fine, no other problems whatsoever :)
All this makes me think that this must be some kind of bug in the motherboard drivers, the PowerSaver driver or other drivers interacting with the battery, the CPU or possibly USB. Is there an explanation for this problem and can it be rectified somehow (e.g. by providing a driver update)?

Hello, thanks for the reply!
My bad, of course I meant the chipset driver. That, however, does not change the essence of the question. Also, I know that a notebook should function properly even the AC adaptor is connected or not connected. That is why I posted my question.
As for the OS reinstall, sorry, I would not do that just on some wild guess from somebody. I recently finished the clean OS install. I have installed XP on dozens of notebooks in my life and I know what I am doing. I have been into computers and networking for 15 years and I know when I see a problem not related to how I install my OSes.
My personal opinion: this problem has not to do with the OS install since the same problem also existed when I test-installed the XP OS image from Toshiba's own downgrade CD (that was before I did a clean install from my own slipstreamed CD). And, if you really use a properly and carefully configured OS with all the necessary software, an OS reinstall is not something you just do every day.
As for the rest (testing the memory / adapter / motherboard etc.): as I have mentioned, similar (although not identical) topics have been raised in various other instances (e.g. at http://laptopforums.toshiba.com/t5/B...EABCA64EE6C5D9) . That means that this problem is most probably not specific to my computer or even to U400 but it may happen with other Toshiba notebooks too. Therefore a (rather standard) suggestion to spend days on reinstalling (and in my case, carefully reconfiguring) the OS, checking the memory, adapter, mobo etc. does not sound as the most plausible one in this case. FYI, I always do full tests on hardware right after I have installed an OS. In this computer, all tests (Toshiba's own; 3rd party memory diagnostics, HDD diagnostics) were passed OK. Indeed, I did not have the AC adapter tested but as it otherwise works fine, the possible problem (if there is one) would be a minor one to notice, and would require testing at a Toshiba service centre (there is no direct Toshiba agency in my country). I think testing the AC adapter is the last resort as much more probably, the problem lies somewhere else.
Even if this problem is hardware-related, I do not expect Toshiba to replace all such hardware out there. However, on many occasions, hardware-related problems can be cured or alleviated on the software side (e.g. by a driver or BIOS update). Since it seems that other people are having similar problems with Toshiba hardware/software, I thought that maybe someone has found an actual solution or maybe there are Toshiba employees reading these forums who could look into it.

How to upgrade to aperture 3.5 when the app store does not show the update. I did buy aperture 3 on DVD not thru the app store. what to do?

I can not open aperture databases anymore as osx10.9 keeps telling me i have opened it with a newer version, which i have not but i understand from other discussions that thru the upgrade of iphoto osx automatically thinks that you have opened with aperture 3.5. the app store does not show me the update as i have not purchased the program thru the app store but on dvd. what to do?

If you are running MacOS X 10.9 and Aperture is installed in your Applications folder and simply called Aperture, not Apertre 3 or something, the AppStore should be showing you the update.
Have you already updated to Aperture 3.4.5 from the Support page Aperture 3.4.5?
Try to update manually to 3.4.5 and then reboot and sign again into the AppStore with your AppleID and look at the Update page.
For some forum members it helped to set the main system language to English U.S. to make the update finally show.
Léonie

The power button does not work

i recently noticed that my original iphone power button does not work i push but nothing happens. I know that i have to fix but the problems is that the warranty is been over for long i need to know a good place to repair because the apple people said they could not fix it. I live in Texas so somewhere close would be nice.

This link is for one 3rd party repair service you can contact for the first generation iPhone and for the iPhone 3G, which is located in Dallas.
http://www.drcellphone.com/iphone-repair-service.php
http://www.drcellphone.com/iphone2g.php

Short flickering when the notebook wakes up from sleep mode MacBook Pro Late 2013

Hello everyone!
I have a question concerning the display of my new MacBook Pro with retina display (late 2013).
Sometimes when opening the lid when the notebook wakes up from sleep mode, the display is flickering for like two seconds. Then everything is normal again.
This specially occurs when the lid has been closed for a longer time. It makes no difference if the power adapter is plugged in or not.
Have you experienced a similar flickering with your MacBook Pro?
Thank you in advance!

Hello!
I have the same problem with my late 2012 MacBook Pro Retina. The constant flickering after being awoken from sleep was a minor annoyance for me so I contacted Apple Support.
I shall explain what I have done thus far, and I recommend you follow the same steps as I did to tick off possible causes:
Firstly, I reset my PRAM (http://support.apple.com/kb/ph14222) and SMC (ttp://support.apple.com/kb/ht3964).
The issue still remained so I checked if the flickering occurred in a new user (if it does not then it points to your account having a setting which is causing the flickering - possibly third party). For me the flickering continued so I tested it in Safe Boot (which worked fine!).
I then ran (just to be certain) the Apple Hardware Test (http://support.apple.com/kb/ht1509). All seemed to be OK. So I reinstalled OS X and still the issue remained.
It was then I had an Apple Support person 'screen share' with me and we went through certain folders. My GPU folder had an unusual amount of files so we trashed them and began a restart however this led to a bigger problem; my notebook wouldn't boot (not even in Safe Boot!), so be very weary at this stage, I'm not sure if this was a rare case or we deleted something we shouldn't have. I then had to go into recovery mode to get back to square one.
Back to the initial problem I reinstalled a 'clean' OS X version from recovery mode; this was to determine whether if the data is corrupted on my account or if it's something else; most likely hardware by now even if there was nothing that came up in the hardware test (it won't account for everything). I checked from both a backup of my data and then from a fresh user after reinstalling OS X and still the flickering continued.
It was then a Senior Apple Support person set up an appointment to have my MacBook looked at and possibly repaired (it could be a minor wire causing the problem).
That is the point I am at now, so for my case it seems like a minor hardware problem. If your case is as similar as mine I recommend making an appointment with them to run more sophisticated hardware tests that your own MacBook would not run.
I will comment again when my issue is completely resolved for those who come across this Discussion in the future.
Hope this helps!

What to do when the power cord does not connect to MacBook Pro?

Similar Messages

Maybe you are looking for