What to do with 6310 all in one printer when done with it?

Want to sell, donate, or recycle (in that order) my HP 6310 All-in-one printer.  The door no longer shuts and an eror message frequently appears saying "carraige jam".  We simply push "OK" and it works.   Instead of trying to fix it -- we bought a new printer.  So, what do we do with our old printer?  
PS - I suspect an HP tech could fix this printer in 2 minutes and a handy computer type could fix it 15 minutes.

Hi @6310endgame, thanks for reaching out to the HP Forums!
If you are still wondering what do do with the 6310 printer I can help. In order;
Sell: You could try on online site and note that is is currently non functional, or maybe post it for parts
Donate: You could take it to a local mom and pop shop, perhaps they should use it for parts to repair another model, or they could repair yours. 
Recycle:  Take a look at the following link; Product return and recycling.
I apologize for the delay, but I hope this resolves your inquiry!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

  • HP OfficeJet 6310 All-In-One printer won't print in color with new cartridge

    HP OfficeJet 6310 All-In-One printer  on a iMAC  OSX version 10.9.5 system
    Hello,
    As I don't print in color much but had need to I discovered my printer not printing in color.  I trouble shooted and even replaced with an new HP95 new from Office Depot ( I never buy refilled).  The printer still won't print color but it advances the paper as if it was printing - just no ink on paper.  I have cleaned thoroughly the ink jet heads, cartridge area, and run all the alignment and printer utilities.    The test page print does not show color either.   I have no error messages.  Don't know what else to do.
    thanks
    DH

    Hi there @dhengr!
    Thanks for contacting the HP Forums!
    I can see your having a print quality issue with your HP OfficeJet 6310.  I should be able to provide documentation that will help locate a resolution.  You mentioned you have already tried another  HP95 tri-color cartridge with no resolution.  I also noticed you said that the quality report from the printer also has no color ink.  
    If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer.  I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer.  If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone.  They deal with hardware warranty and replacement options.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html 
    Have a great weekend and thank you again for posting on the HP Forums!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • What is the best all in one printer that works with the iPad

    The best all-in-one-printer to use with the ipad mini

    Any that advertise Airprint compability will work for printing. Note that you can't use the scanning or faxing features of an all-in-one with an iPad.
    See the Airprint printers on the Apple store site:
    http://store.apple.com/us/ipad/ipad-accessories/printers#!
    Matt

  • Receiving a false paper jam error message for a 6310 all in one printer

    I have an hp 6310 all in one printer.  It is showing a false paper jam error message with no paper in the printer.  I have tried all  of the fixes that have been suggested on the website as well as on you tube to no avail.  Nothing works, I have cleaned all of the parts that have been suggested to clean and reset the printer. I am still receiving the same paper jam message with no paper in the printer.  Does anyone have any suggestions to try to fix this printer. 

    Do you here any clicks or other sounds when the 6310 first starts up?
    I'm trying to fix false paper jam error on Sharp Fax/copier,F0-4450.
    When researching the problem, found suggestion that a bad solenoid could cause that error. 
    After completely disassembling the copier found that wasn't the problem.
    I here 2 clicks during start up that sounds like gear slipping a tooth, as if something is preventing a shaft from turning.
    Back to the drawing board.
       UPDATE!!! Took fuser out, turned gears with screwdriver til 81/2x11 paper went thru, lubricated ends of fuser roller with powdered graphite lube.
    3 page fax came thru.

  • Problem setting up HP 6310 all-in-one printer/scanner

    I have just installed archlinux for the first time, and so far everything is working great except for a HP 6310 all-in-one printer/scanner. This printer is connected by wire to a router, and the computer communicates with the router over a wireless connection. I have managed to install the printer through cups and print a test page. The problem is getting hplip and sane set up. I belive that if I get hplip set up correctly that that will take care of the sane problem.
    Trying to install the printer with hp-setup:
    [mike@archy ~]$ sudo hp-setup -i 192.168.1.104
    Password:
    HP Linux Imaging and Printing System (ver. 3.9.12)
    Printer/Fax Setup Utility ver. 9.0
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    (Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
    Setting up device: hp:/net/Officejet_6300_series?ip=192.168.1.104
    | PRINT QUEUE SETUP |
    Please enter a name for this print queue (m=use model name:'Officejet_6300'*, q=quit) ?
    Using queue name: Officejet_6300
    Locating PPD file... Please wait.
    error: No PPD found for model officejet_6300 using new algorithm. Trying old algorithm...
    Found PPD file: drv:///hp/hpcups.drv/hp-officejet_6300_series.ppd
    Enter a location description for this printer (q=quit) ?computer room
    Enter additonal information or notes for this printer (q=quit) ?
    Adding print queue to CUPS:
    Device URI: hp:/net/Officejet_6300_series?ip=192.168.1.104
    Queue name: Officejet_6300
    PPD file: drv:///hp/hpcups.drv/hp-officejet_6300_series.ppd
    Location: computer room
    Information:
    error: Printer queue setup failed. Please restart CUPS and try again.
    Restarting cups doesn't change anything.
    Running hp-check gives this:
    [mike@archy ~]$ hp-check
    HP Linux Imaging and Printing System (ver. 3.9.12)
    Dependency/Version Check Utility ver. 14.3
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    Note: hp-check can be run in three modes:
    1. Compile-time check mode (-c or --compile): Use this mode before compiling the
    HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
    are installed to successfully compile HPLIP.
    2. Run-time check mode (-r or --run): Use this mode to determine if a distro
    supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
    has the proper dependencies installed to successfully run.
    3. Both compile- and run-time check mode (-b or --both) (Default): This mode
    will check both of the above cases (both compile- and run-time dependencies).
    Saving output in log file: hp-check.log
    Initializing. Please wait...
    | SYSTEM INFO |
    Basic system information:
    Linux archy 2.6.32-ARCH #1 SMP PREEMPT Sat Jan 23 13:53:44 UTC 2010 i686 Intel(R) Pentium(R) III CPU 1133MHz GenuineIntel GNU/Linux
    Distribution:
    unknown 0.0
    Checking Python version...
    OK, version 2.6.4 installed
    Checking PyQt 4.x version...
    OK, version 4.6.2 installed.
    Checking for CUPS...
    Status: scheduler is running
    Version: 1.4.2
    error_log is set to level: debug
    Checking for dbus/python-dbus...
    dbus daemon is running.
    python-dbus version: 0.83.0
    | COMPILE AND RUNTIME DEPENDENCIES |
    note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
    note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
    Checking for dependency: CUPS - Common Unix Printing System...
    OK, found.
    Checking for dependency: CUPS devel- Common Unix Printing System development files...
    OK, found.
    Checking for dependency: CUPS image - CUPS image development files...
    OK, found.
    Checking for dependency: DBus - Message bus system...
    OK, found.
    Checking for dependency: gcc - GNU Project C and C++ Compiler...
    OK, found.
    Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
    OK, found.
    Checking for dependency: libcrypto - OpenSSL cryptographic library...
    OK, found.
    Checking for dependency: libjpeg - JPEG library...
    OK, found.
    Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
    OK, found.
    Checking for dependency: libpthread - POSIX threads library...
    OK, found.
    Checking for dependency: libtool - Library building support services...
    OK, found.
    Checking for dependency: libusb - USB library...
    OK, found.
    Checking for dependency: make - GNU make utility to maintain groups of programs...
    OK, found.
    Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
    OK, found.
    Checking for dependency: PolicyKit - Administrative policy framework...
    OK, found.
    Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
    OK, found.
    Checking for dependency: Python DBus - Python bindings for DBus...
    OK, found.
    Checking for dependency: Python devel - Python development files...
    OK, found.
    Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
    OK, found.
    Checking for dependency: Python XML libraries...
    OK, found.
    Checking for dependency: Python 2.3 or greater - Required for fax functionality...
    OK, found.
    Checking for dependency: Python 2.2 or greater - Python programming language...
    OK, found.
    Checking for dependency: Reportlab - PDF library for Python...
    OK, found.
    Checking for dependency: SANE - Scanning library...
    OK, found.
    Checking for dependency: SANE - Scanning library development files...
    OK, found.
    Checking for dependency: scanimage - Shell scanning program...
    OK, found.
    Checking for dependency: xsane - Graphical scanner frontend for SANE...
    OK, found.
    | HPLIP INSTALLATION |
    Currently installed HPLIP version...
    HPLIP 3.9.12 currently installed in '/usr/share/hplip'.
    Current contents of '/etc/hp/hplip.conf' file:
    # hplip.conf. Generated from hplip.conf.in by configure.
    [hplip]
    version=3.9.12
    [dirs]
    home=/usr/share/hplip
    run=/var/run
    ppd=/usr/share/ppd/HP
    ppdbase=/usr/share/ppd
    doc=/usr/share/doc/hplip-3.9.12
    icon=/usr/share/applications
    cupsbackend=/usr/lib/cups/backend
    cupsfilter=/usr/lib/cups/filter
    drv=/usr/share/cups/drv/hp
    # Following values are determined at configure time and cannot be changed.
    [configure]
    network-build=yes
    pp-build=no
    gui-build=yes
    scanner-build=yes
    fax-build=yes
    dbus-build=yes
    cups11-build=no
    doc-build=yes
    shadow-build=no
    hpijs-install=yes
    foomatic-drv-install=yes
    foomatic-ppd-install=yes
    foomatic-rip-hplip-install=yes
    hpcups-install=yes
    cups-drv-install=yes
    cups-ppd-install=no
    internal-tag=3.9.12.29
    restricted-build=no
    ui-toolkit=qt4
    qt3=no
    qt4=yes
    policy-kit=no
    hpijs-only-build=no
    lite-build=no
    udev-acl-rules=no
    hpcups-only-build=no
    hpijs-only-build=no
    Current contents of '/var/lib/hp/hplip.state' file:
    # hplip.state - HPLIP runtime persistent variables.
    [plugin]
    installed=0
    eula=0
    Current contents of '~/.hplip/hplip.conf' file:
    [last_used]
    device_uri = hp:/net/Officejet_6300_series?ip=192.168.1.104
    [installation]
    version = 3.9.12.29
    date_time = 01/24/2010 15:48:05
    | DISCOVERED USB DEVICES |
    No devices found.
    | INSTALLED CUPS PRINTER QUEUES |
    Officejet_6300_series
    Type: Unknown
    Device URI: socket://192.168.1.104
    PPD: /etc/cups/ppd/Officejet_6300_series.ppd
    PPD Description: HP Officejet 6300 Series, hpcups 3.9.12
    Printer status: printer Officejet_6300_series is idle. enabled since Sat 23 Jan 2010 02:26:45 PM CST
    warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
    | SANE CONFIGURATION |
    'hpaio' in '/etc/sane.d/dll.conf'...
    OK, found. SANE backend 'hpaio' is properly set up.
    Checking output of 'scanimage -L'...
    No scanners were identified. If you were expecting something different,
    check that the scanner is plugged in, turned on and detected by the
    sane-find-scanner tool (if appropriate). Please read the documentation
    which came with this software (README, FAQ, manpages).
    | PYTHON EXTENSIONS |
    Checking 'cupsext' CUPS extension...
    OK, found.
    Checking 'pcardext' Photocard extension...
    OK, found.
    Checking 'hpmudext' I/O extension...
    OK, found.
    Checking 'scanext' SANE scanning extension...
    OK, found.
    | USB I/O SETUP |
    Checking for permissions of USB attached printers...
    HP Device 0xb1d at 004:002:
    warning: Device URI: (Makeuri FAILED)
    | USER GROUPS |
    lp wheel network video audio optical storage scanner power users mike
    | SUMMARY |
    error: 1 error or warning.
    Please refer to the installation instructions at:
    http://hplip.sourceforge.net/install/index.html
    Done.
    I have a feeling that the problem is here:
    warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
    Something about the backend isn't right, but I'm out of my depth here. Any suggestions would be appreciated.
    One other point. It works with no problem in Ubuntu with both hplip and sane, so I know it is possible. I just haven't figured out the trick yet.

    Well, it's fixed now, but I'm not sure why. I hooked up a HP 3970 usb scanner to my computer and when I started xsane it not only found it, but also found the 3610 all-in-one on the network. I checked hp-tools, and the 3610 was there also.So everything is working now, but I'm still curious as to why the 3610 wouldn't work with sane and hp-setup until I plugged in the 3970 to the computer.

  • Hp 6310 all in one printer keeps automatically uninstalling

    HP 6310 All-in-one printer purchased in 2008.
    The printer keeps automatically uninstalling itself. 
    1.  I have tried everything including downloading drivers. 
    2.  I have completely uninstalled and reinstalled from disc.  It still keeps happening.
    3.  I have tried leaving the computer and printer on over night so that the setup does not change.  No it still happens.
    4.  Even when I do get it printing.  It can print of some pages.  The after some pages it decides that it and the printer has again uninstalled.
    5.  It can take hours to get the printer to work.  Installing, switching the printer on and off.  Even when the printer is set up and states its all ok.  The printer won't work.  Well sometimes it might but mostly not.
    HELP.
    Vi

    Hello @Vipro9 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing printer driver issues.  I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Also, do you have the same issue making a copy as opposed to a print?
    Good luck and please let me know the results of your findings. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • I have 1 HP Officejet J6480 All-in-one printer, when I print a page off of the net, it only prints o

    I have 1 HP Officejet J6480 All-in-one printer, when I print a page off of the net, it only prints one top line (ex: Page 1 of 1) and it only prints the footer. It does the same with my HP Deskjet F4100 series printer.

    Call and/or check HP Support website for updated drivers.  You can also check KB Articles:  http://support.apple.com/kb/HT3669 Printer and scanner software available for download
    and http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
    What to do when you can't print

  • I Have a Mac 10.2 and a HP 6700 all-in-one printer,when I set-up to print the top line of the image is cut off

    I Have a Mac 10.2 and a HP 6700 all-in-one printer,when I set-up to print the top line of the image is cut off

    If there isn't a Page Setup in the Print Dialog, open Text Edit>Edit>Page Setup, check borders there or use Custom Page setup & save.

  • HP Photosmart C7280 All In One printer not campatible with windows 8.1

    I have an old Photosmart c7280 all in one printer.  I bought a new computer that has windows 8.1.  HP doesn't
    have software or drivers that can make this printer compatible with my new computer.  What can I do besides buy a new prfnter?

    Hi,
    Please download the following Software and Derivers and install on your new Windows 8.1 machine:
        http://ftp.hp.com/pub/softlib/software12/COL30662/mp-110038-1/PS_AIO_02_Net_Full_Win_WW_140_408.exe
      Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • All-in-one printer that works with Airport Extreme (n)

    Hi all,
    I have recently bought an Intel MacBook and an Airport Extreme 'n'.
    Now I am looking for a compatible all-in-one (multifunction) printer. I have been searching on the net all day till my eyes are sore.
    I don't need to use it too often so am looking for a a cheapie under $120. I mainly need it for printing black and white, photocopying and scanning the occasional document.
    Is anyone using one with decent quality or can recommend one?
    I know about ifelix's list but am looking for a recommendation as well as one that is compatible...
    thanks you...

    I have looked around here, and just can't figure this
    out, please someone help. I just purchased a 3180 hd
    with my macbook. Was printing wirelessly fine with
    my previous hd and new extreme. Now this one isn't
    working and hp said that it is not a supported
    wireless printer. Why on earth would apple sell this
    printer then.
    Could someone please tell me how to make this printer
    work over my new airport extreme base. PLEASE
    This is the problem with the new airport extreme(n). All the printers work when connected directly to your computer, it is when they are connected to the base station that there seems to be compatibility problems. I have ruled out buying the C3180 for this reason.
    Someone may be able to help you. If not you will either have to connect it directly to your mackbook to use it or return it and buy one that is compatible.

  • Usb for 1510 all-in-one printer causing problems with it accepting print jobs

    I am having trouble downloading the driver for a 1512 all-in-one printer.  It was working for about a week and it is not working now.  I loaded the suggested driver 1510 all-in-one driver but when I get to plugging in the usb from my Windows 7 laptop to the printer, it does not feel it is connected.  I can print items that I scan but am puzzled how it will not print.  The only thing I have deduced is I need a new usb cable.  I bought on ebay as I've always had good luck with hp products.
    Sparky325

    I decided that in spite of the fact that it had previously printed, I got another USB cord and used that and then the printer worked.  The one I received with the printer must have been too loose to make a connection.  This one feels snug when i need to print from my laptop.  Thanks for your help. Sparky 325

  • Help with a driver to enable HP Office jet 5610 all in one printer to work with ubuntu

    trying to scan and up load to my computer, but my HP office jet 5610 all in one printer does not work with Ubuntu.. Need new driver or something.

    This is a Firefox help forum, so getting your printer working on ubuntu is beyond the scope of this forum. I would recommend something like [http://www.ubuntuforums.org/ www.ubuntuforums.org/] for help

  • Problems with hp1317 all-in-one printer

    I have a Mac OS X snow leopard and an HP 1317 all-in-one printer.  Although it says that the printer is ready it still remains idle and won't print. I've checked everything I can think of: unplugged the printer for a while and made sure I have clicked on Resume  etc.  Please could someone help? Thanks.  I did have suggestions from someone and this helped for a while but now having problems again.

    Thanks for your suggestions.  I've now uninstalled and reinstalled the HP software but am still having the message that there are components missing from the software so I still cannot print my documents.  I'm totally baffled and feel like slinging the computer through the window!!! If you havae any more ideas please feel free to pass them on to me.

  • I have a : HP Photosmart Plus e-All-in-One Printer - B210a, Problem with latest software update

    I have just installed HP update PSB210_231.exe .  The result is that the HP B210a support software on my Windows 7 Dell PC has suddenly lost a number of facilities including the ability to review the ink levels or to run diagnostics and tests on the printer.
    How can I uninstall or can you provide a fix?

    Hi all,
    Make sure to remove the current software by going to Start > All Programs > HP > HP Photosmart B210 > Uninstall..
    Then go to Programs and Features and remove any remain item of the printer, any item should beging with HP, as well you may see the Read Iris software..
    After uninstalling the software reboot your PC, download and install the updated software version below:
    http://ftp.hp.com/pub/softlib/software12/COL34268/mp-109398-2/PSB210_1315.exe
    I believe the problem should be resolved,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • PB with HP 6310 All-in-one

    Hello all,
    I just purchased a HP 6310 all-in-one printer. It installed just fine with my Win XP machine. I installed the software on the PB, but when I was asked to plug in the USB connection, no connection found. I use the USB ports all the time, so I know they work. It acts like a bad usb cable, but I am able to print from my other computer, so it is a PB issue. Does anybody know why the HP Setup Assistant does not see the printer when plugged in? Thank you.

    Have you tried any other USB devices in the same ports on the computer?

Maybe you are looking for