What to do with a spare Airport Extreme

Having replaced my old router with a wireless one, I now have a spare Airport Extreme. I am sure I should put it to good use. I have also ordered Airport Express to work my hifi. Can the Extreme work with Itunes, and do the same things that the Express can?

Can the Extreme work with
Itunes, and do the same things that the Express can?
No
The AEBS can not be used to stream AirTunes.
If you can connect it by cable to your wireless router you could use it as a print server.
iFelix

Similar Messages

  • What type of repeater should I use with my new Airport Extreme?

    what type of repeater should I use with my new Airport Extreme? Thanks.

    If you want to repeat both bands of your dual band AirPort Extreme, another AirPort Extreme would meet these requirements.
    If you only need to extend one of the bands that the AriPort Extreme provides, then an Airport Express would do that nicely.

  • What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2  modem and I can't get the configuration working. What modem does Apple recommend?

    I am having problems setting up airport extreme.
    What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+  modem and I can't get the configuration working. What modem does Apple recommend?

    Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
    http://www.actiontec.com/support/product_details.php?pid=41#q27
    Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
    The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
    The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
    If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
    So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem...

  • My old Time capsule was not working well.  I replaced it with a new Airport Extreme.  Now I can see the other airport express stations.  I tried resetting them, but it did not work.  What do I do?

    I replaced my old time capsule with a new airport extreme.  I have 3 airport express stations that I have all around the house.  (2 1st generation, 1 second generation).  I can't see them with airport utility.  I tried resetting, but no luck.  Any suggestions?

    Bring all the express to the same room as the mac you are using to setup the network..
    One by one, plug them in and do full factory reset on them.. they should then show up in the Airport utility as Other Wi-Fi devices (1) and you can select them and continue the setup.
    If that fails try using the airport utility on ipad or iphone as they are far less problematic than Yosemite in particular.

  • Can you share a hard drive with the current airport extreme

    Hey all!
    I read that you can share USB drives with the new airport extreme. Can you do that with the current ones?
    Thanks,
    B

    Massi65, Welcome to the discussion area!
    You really should start a new thread since your question is about the new square AEBS and the thread started with a question about the previous AEBS.
    With either AEBS you could wirelessly gain access to a hard drive by one of these 3 methods:
    Use a hard drive with wireless networking capabilities. The drive would connect to the wireless network like any other wireless client.
    Use a hard drive with an Ethernet interface. Connect the drive to the AEBS's LAN port.
    Connect a hard drive via FireWire or USB to another Mac and then share the drive from that Mac.
    The new square AEBS offers a new possibility. You can connect a USB drive directly to the new AEBS and share it to devices connected to the AEBS's network.
    What performance could I expect?
    No one can answer this directly since no one has any of these devices to try.

  • Which airport is good to extend my wifi, what is the difference between the AirPort Extreme and the airport express base sstation

    What is the difference between the AirPort Extreme and the airport express base station and which one can extend my wifi router.

    With rare exceptions of a few older routers, neither one can extend a non-Apple router's network wirelessly - they are not designed that way - but you can extend the wireless network if the Extreme is hardwired to the router or you can connect wirelessly and join the network as an access point that will provide remote ethernet access but not produce or extend the wireless signal - here is a comparison of the Apple base stations - http://www.apple.com/wifi/

  • Where can I see what devices are connected to my Airport Extreme?

    I just switched from a Belkin wireless-g router to the Airport Extreme (802.11n). With my Belkin router, when I entered the address "192.168.2.1", I was taken to a menu where, among other things, I could view all connected devices. How do I do that with my new Airport Extreme? Thanks!

    Hi David, welcome to the discussions!
    You will have to dig a bit for the info, but it is there.
    Open AirPort Utility
    Click on Manual Setup near the bottom of the pane
    Click on the gear shaped Advanced icon at top of the window.
    Click on Logs and Statistics
    Then click Wireless Clients or DHCP Clients to see who is connected.

  • I have a RCA media streamer that will not connect to my network with a new airport extreme.

    I have a RCA media streamer (Model # DSB872WR)  that will not connect to my network with a new airport extreme.I had to create a new network and  my computers are connected but media streamer will not. Can anyone help? Thank you

    Hi, papineaubill!
    Welcome to The Canon Forums, and thank you for your inquiry!
    We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.  If you live outside the United States, please click here and select your country or region for your support needs.
    Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
    Thanks for choosing Canon!

  • I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

    I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.   

    Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

  • Apple TV mirroring issues even with Mac mini,airport extreme bought at the end of last year,and an iPad 2

    Apple TV mirroring issues even with Mac mini,airport extreme bought at the end of last year,and an iPad 2

    I have the same issue with ATV3 and iPhone 4S. Everything works properly, no buffering issues when watching netflix, vimeo, youtube BUT when I try mirroring even a small 15sec iPhone movie it stutters and buffers and results to a choppy playback..same with larger mp4 files such as 1-1.5GB, buffers forever and never plays, I just re-encoded the same movie to 700MB and plays perfectly..
    Why Apple, why?..so close..I can accept the bigger movie files issue, but not being able to playback properly an iPhone movie is funny..I recorded a movie with lower bitrate through Filmic Pro (Economy mode, up to 16Mbps)
    and plays properly.
    Is there an upcoming software update going to solve the problem or is it hardware related and therefore not fixable.
    Please don't reply with a network related answer, by 2012 we know how to set up our networks and everything else runs flawlessly.
    I'll apreciate a fast answer, we love Apple, but if it can't play an iphone movie (or a high quality movie from iTunes) it's just not up to my standards.
    Thanks again.
    JP

  • What are the steps to upgrade airport extreme?

    I have an older airport extreme and network and I'd like to spin up a new network with the new airport extreme. I am having difficulty even accessing the set-up menu and the manual only covers patently new installations.
    Does anyone out there have a reliable set of upgrade steps?
    Thanks!

    Newer versions of the AirPort Extreme have different hardware than earlier versions . Sorry, but you will not be able to update your older version AirPort Extreme to operate as if it were a newer version.
    You can check to see if any firmware updates are available for your AirPort Extreme, but this will not add new "features" to your current version.
    Open AirPort Utility - Click Manual Setup
    Click directly on the word Version and any available firmware updates will be displayed.

  • I have already bought a macbook pro in USA and I want to use it in Europe. What adapter I need for my Airport Extreme?

    I have already bought a macbook pro in USA and I want to use it in Europe. What adapter I need for my Airport Extreme?

    No power adaptor is needed as the power units are auto-switching. But you will need wall outlet adaptors such as you will find in Apple's World Travel Kit, at AAA stores, and other vendors.

  • Are there any compatibility issues with Sonos and Airport extreme??

    are there any compatibility issues with Sonos and Airport extreme??

    Sonos uses its own priopietory wireless protocol SonosNet to distribute audio data among all its products, thus it should not affect other network devices which use standard WiFi 802.11a/b/g/n protocol at all though they may share the same radio channel for wirless signaling.
    On my dual-band (5 GHz / 2.4 GHz) Airport Extreme staion, I select the option "802.11n Only (5GHz) - 802.11n (2.4GHz)" and turn on "Use wide channels" in Wireless configuration in order to use only 802.11n protocol and more radio channels to achieve maximum wireless bandwidth of 400 Mbps. This bandwidth is necessary for quick Time Machine backup to NAS connected to the Airport Extreme station through Ethernet cable. So my iMac and MacBook Pro always connected to the Airport Extreme through 5 GHz radio channel with 802.11n protocol whereas my iPhone 4S always connected through 2.4 GHz radio channel with the same protocol.
    In my living room Sonos ZP-90 (same as new CONNECT model) zone player is connected to Airport Extreme directly through Ethernet cable (recommended by Sonos) and Sonos S5 (same as new PLAY:5 model) zone player in bedroom is connected wirelessly through SonosNet protocol to the ZP-90 zone player in living room.
    These devices are in operation simutaneouly most of the time. Music is playing through the Sonos ZP90/S5 zone players througout the day, I am streaming viedo through Internet (fibre broadband 25 Mbps) on my MacBook Pro in bedroom or iMac in living room or reading news on my iPhone. So far so good and have no encounter any interference problem for about three years. Further more bandwidth for 802.11n protocol does not seem to be affected at all.
    In fact with a low power Fujitsu USB drive (2.5" / 500 GB, designed for notebook) plug into USB port of Airport Extreme, it can be used as NAS drive for Sonos music distribution system without any problem. Just transfer all files from Music folder in my home directory on iMac into this NAS drive and set it up as music source in "Manage > Music Library Settings" in Sonos Controller for Mac application will do. Though the same drive can be served as Time Machine's backup disk as well, an independent full-fledged NAS drive for Sonos and Time Machine backup is better long-term solution for reliability and performance. With the NAS configured as sole music source, you do not need to keep any computer powered on all the time in order to play music through the Sonos system.

  • Can I use my 2010 AirPort Extreme as a range extender with a new AirPort Extreme?

    I want to use an existing AirPort Extreme (2010 model) with a new AirPort Extreme to extend the range and signal strength into a shop. They are different designations, one n and the other ac. Are they compatible. I need to know before I buy the new router.

    The new AirPort Extreme will provide an ac,n,g,b compatible wireless signal.
    The existing AirPort Extreme can be configured to extend the n,g,b signal, but it cannot extend the ac signal.

  • Extending an existing wireless network with a new Airport Extreme(802.11n)

    Is it possible to extrend a existing wireless network comprised on a Airport Extreme (g) and a Airport Express with a new Airport Extreme (n) ? and possibly accesss an airdisk? Have tried settng channel to the same (1) but no worky.
    I have had real problems (at least 2 hours with Apple Care to no avail) at getting the new Airport Extreme(n) to connect to the internet (Ozemail/iinet) with PPOE. Authentication when changed to occur at ADSL modem and produces no errors (green light) but no internet still through AE(n). Not Hardware either as both ADSL modem and AE(n) have been changed.
    So as a last ditch attempt, thought I might try extending the preexisting network that works fine so I can access an AirDisk.
    Any reponses appreciated.

    Search this forum for "WDS". Since I am having massive problems myself right now, I can only tell you: Try the two methods mentioned in this thread:
    http://discussions.apple.com/thread.jspa?threadID=944334&tstart=0
    Maybe you're lucky!

Maybe you are looking for

  • On running a stand alone client there is no output

    Hello, I am using j2sdk1.4 and j2sdkee RI 1.3. I have tried to develop the EJB code which is provided in Head First EJB in the first chapter. Everything happened accordingly till deployment. When I tried to run the client I received an exception. For

  • BPM Modelling Query

    Hi Experts, Scernario:  Create and change of MDM Customer Master data via BPM In our scenario, we are using One webdynpro component UI Component. This webdynpro component is used for both change and create. In BPM Modelling, I have create a Task for

  • Error in Hashtable put method-Can not resolve symbol

    Hi there!I am new to using java.util.Hashtable. I am using it for a command line instant messaging program for holding the list of clients and list of client names currently connected to the server. However when I compile my server with the command j

  • Setting up shippign status tracking

    hello colleagues, I am working on ERP Ecommerce for CRMJAVA7.0 i wanted to set up shipping status tracking in ERP Ecommerce, has anyone worked on it, if you have any kind of info on setting this up, please share the info with me. regards chandu

  • DFKKOP partitioning

    Hello there, Our I-SU DFKKOP table increases day after day (today ~ 90000000 rows and 50 Gb). In despite of index compression which really improved some queries, we want move foreward towards partitioning. I have read this paper http://www.oracle.com