What to do with an ISO file?

I've downloaded a zip file which has expanded to an iso file - I thought i needed to burn it to dvd before opening but nothings happened.... it does look like it hasn't fully uncompressed.... any ideas? Thanks....

An ISO is yet another compressed file. So your compressed ZIP archive was just a compressed ISO archive (double-zip!). Not sure why anyong would do that, but simply copying the ISO to a disc won't work. You'll end up with a single file (the ISO) burned on the disc.
You need to do a "burn image" session. Nearly all burning software has that ability. Basically the burning software unzips the archive to disc during the burn so that you end up with a multitude of files on your disc.
ISO is particularly useful when imaging a bootable disc, and then making copies from that image that boot like the original.
Good luck.
Jeffo93y

Similar Messages

VM installation with multiple .iso files

Hello All:
I have a windows image which spread across 3 iso files. So I started to install the VM from the first iso files, then it got to a point where it ask me for the 2nd iso file.
This is where I am stuck. Does anyone successfully install a VM with multiple iso files?
What is the correct procedure to do this installation?
thanks,
Peter
Edited by: user3229804 on Jun 21, 2011 11:45 AM

First thing, have you already imported (into VM Manager) the other CD/DVD's into separate .iso files?
Then during installation, from open VNC Console window, make sure that you resize the window so that the lower portion is visible. There is a drop down button that will let you select a different .iso file, and a button next to it that says something like "Change Disk". This effectively lats you swap the DVD for the installation process to continue.
Screen shots would be helpful here, but the key is resizing the VNC Console window, because duringmy install, the default window size cropped these buttons out.
Hope this helps.

Needs windows xp professional with sp3 iso.file

plz help me to download winxp with sp3 iso file , like windows 7 iso image which is available
I am very thankful

I don't think it'll be available now. Its hardly 2 months left for Win XP support
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Installing Windows 8.1 on a Mid-2010 13-inch MB Pro, with an iso file.

Hi Everyone,
My first post, so bare with me.
I'm hoping to get some help here, after almost trying everthing on the menu.
What im looking for is an explanation on how i can get Windows 8.1 installed on my MB Pro, with the use on iso file. I have downloaded, the necesarry BootCamp Drivers etc. When i launch the Bootcampassistant the only options I am able to choose from are: 1: Download the latest Windows support software from Apple and 2: Install Windows 7.
If any of have the solution to my problem, please do comment.
Thanks,
HB

Read the Boot Camp guides, especially the Boot Camp system requirements located here: http://support.apple.com/kb/HT5634.
The system requirements for your computer indicate that your computer does not suppot Windows 8.1.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD

What's wrong with the XML file????

Hello!
I am tryig to implement a "Filter" on my Apache tomcat server. The problem occures when I try to modify the XML-file on the server. This is the XML file:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
                    
<filter>
     <filter-name>LoginChecker</filter-name>
     <filter-class>filters.LoginFilter</filter-class>
</filter>
                    
<filter-mapping>
     <filter-name>LoginChecker</filter-name>
     <url-pattern>/secret/*</url-pattern>
</filter-mapping>
                    
<servlet>
        <servlet-name>SLoginHandler</servlet-name>
        <servlet-class>LoginHandler</servlet-class>
</servlet>
<servlet>
         <servlet-name>SProtectedResource</servlet-name>
         <servlet-class>ProtectedResource</servlet-class>
</servlet>
<servlet>
        <servlet-name>SRegister</servlet-name>
         <servlet-class>Register</servlet-class>
</servlet>
<servlet>
        <servlet-name>SVerify</servlet-name>
         <servlet-class>Verify</servlet-class>
</servlet>
                    
<servlet-mapping>
        <servlet-name>SLoginHandler</servlet-name>
         <url-pattern>/LoginHandler</url-pattern>
</servlet-mapping>
<servlet-mapping>
         <servlet-name>SProtectedResource</servlet-name>
         <url-pattern>/ProtectedResource</url-pattern>
</servlet-mapping>
<servlet-mapping>
         <servlet-name>SRegister</servlet-name>
         <url-pattern>/Register</url-pattern>
</servlet-mapping>
<servlet-mapping>
        <servlet-name>SVerify</servlet-name>
        <url-pattern>/Verify</url-pattern>
</servlet-mapping>
</web-app>When I try to run another sevlet on the server side, e.g, "Verify", I'll get an error message. BUT if I changethe XML file to (remove the "filter" spec):
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
                    
<servlet>
        <servlet-name>SLoginHandler</servlet-name>
        <servlet-class>LoginHandler</servlet-class>
</servlet>
<servlet>
         <servlet-name>SProtectedResource</servlet-name>
         <servlet-class>ProtectedResource</servlet-class>
</servlet>
<servlet>
        <servlet-name>SRegister</servlet-name>
         <servlet-class>Register</servlet-class>
</servlet>
<servlet>
        <servlet-name>SVerify</servlet-name>
         <servlet-class>Verify</servlet-class>
</servlet>
                    
<servlet-mapping>
        <servlet-name>SLoginHandler</servlet-name>
         <url-pattern>/LoginHandler</url-pattern>
</servlet-mapping>
<servlet-mapping>
         <servlet-name>SProtectedResource</servlet-name>
         <url-pattern>/ProtectedResource</url-pattern>
</servlet-mapping>
<servlet-mapping>
         <servlet-name>SRegister</servlet-name>
         <url-pattern>/Register</url-pattern>
</servlet-mapping>
<servlet-mapping>
        <servlet-name>SVerify</servlet-name>
        <url-pattern>/Verify</url-pattern>
</servlet-mapping>
</web-app>The servlet "Verify", or some other servlet, will work!!!
What is wrong with my filter spec in the XML file?????

hepp, no one asked for it...so no one will get it!
BUT if "stevejluke" want another duke so let me know!

What to do with js, css files

I hope this question is appropriate for this forum because I have scratched my head for hrs. I am in the mission of finding a simple drop down menu and came across to this site http://css-tricks.com/simple-jquery-dropdowns/
It uses minimum jquery and CSS to achieve it. Looks like it is reasonable for a novice to tackle. Codes are downloaded and unzipped ( there are css,images,js). Question is how do I even get this to run under my test application ? I would think I need to import the image files but what to do with the rest of files? they are not plugin. Could any guru give me a jump start ?
Any help is appreciated.
ZenG

You should be able to import them into APEX under "Shared Components - Static Files" and "Shared Components - CSS". Then you can include the files in your page template using the following html code:
for js files
<script src="#APP_IMAGES#hoverIntent.js"></script>for css files
<link rel="stylesheet" href="#APP_IMAGES#style.css" type="text/css" />After a quick glance, I don't think you'll need the image they have included.

What to do with "Unix Executable Files"?

What do I do with Unix Executable Files? I've tried navigating to them in Terminal and typing in the file name but that doesn't work. How do I execute them?
I'm trying to install some web development framework software, and it appears that the command names start with the file I'm referring to but when I'm in the directory containing the Unix Executable File and type in the file name followed by a command it doesn't work. I get "command not found"
G5 Mac OS X (10.4.6)

Hi warpdesign,
   In old-style shell environments, all files in the current working directory were defined to be in your PATH, where the shell looks for executables. That was before Trojan Horses. Now you have to specify the current working directory in the command line. Fortunately there is a nice "shorthand" for that. If foo.sh is an executable in the current working directory then it can be invoked this way:
./foo.sh
   If you're interested in learning a little more about UNIX, I used to have a long post of links to what I think are some of the better beginning UNIX tutorials and books. However, as others posted great links and I stole them, my post became too long so I put it in a web page. Bill Scott did the same thing so here is Bill's and here is mine.
Gary
~~~~
   University politics are vicious precisely because the
   stakes are so small.
         -- C. P. Snow

What is wrong with my txt file or merge doc?

I'm trying to merge data from a txt file. It's for name badges. I've got the document designed (8-1/2 x 11" Avery 5392, 6 badges per sheet) and connected successfully to my data source. There are only 4 types of info in the txt file (agency name, state, name, title). When I create the merge fields for each badge position and click preview, I only get the first record repeated into each of the 6 locations on the page. What am I missing or doing wrong? I'm using InDesign CS2.
I've attached the txt file.
I've also attempted this with a csv file with and got the same results.
Thanks.

I downloaded your sample files, and here is what I had to adjust:
1, I made the master page a single page; not facing pages. I changed from inches to picas
2. I made two layers: one for graphics and second for text, above the graphics layer
3. I put the artwork ai file on the graphics layer on the master page
4. I deleted 5 of 6 duplicate text frames on page 1; leaving only the first upper left text frame
5. I moved that lone textframe to the master page, in the same relative position
6. Text in that text frame should have been controlled with paragraph styles, BTW, but that is a detail
7. I returned to view page 1
Then, going to the DataMerge panel, I turned on preview and also clicked the right-most button at the bottom of the panel to setup the merge.
All records and Multiple Records per document page
Then, onto the Multiple Record Layout tab:
Top margin 16pica
Bottom margin 3pica
Left margin 2pica
Right margin 2pica
Spacing between columns 1p6
Spacing between rows 11p6
Check on Preview Multiple Record Layout
OK to generate
So, it turns out your txt file was OK as it was.
Mike Witherell in Maryland

What's wrong with my Quartz files?

I have an issue with Quartz Composer files. Some screensaver files, like arabesque, shell spectrum, and RSS visualizer, crash system preferences whenever i try to select them. Also, the actual files (the ones in the system folder) make the finder crash whenever i try to open them or use quick look. I've already replaced the files thinking they were corrupted, but it keeps happening. I transferred the files to my old iMac G5 and it reads them just fine! Help!!
Also, iChat keeps crashing whenever i try to use the video effects.
Message was edited by: Craig Anschuetz

Have you by any chance installed the beta version of the upcoming Safari? If so, that's the problem. See this thread for more details:
http://discussions.apple.com/thread.jspa?messageID=7975911
If you aren't using the beta Safari afraid I don't know. Mine are all working just fine in 10.5.5. I don't use iChat, so don't know if that would be affected by the same problems.
Francine
Francine
Schwieder

What To Do With An .img File?

My Cisco rep provided a download of a .img file for the 5.x version of the Cisco VPN client, but I can't do anything with it. My CD/DVD burning app won't handle a .img file and, when I changed the extension to .iso as recommended in several non-Cisco forums, it didn't recognize that, either. So far I've been unable to reconnect with my rep, but I need this client. Any suggestions anyone?

The image that you were provided with: sa500-k9-2.1.18.img is incorrect. That is not VPN Client version 5.x nor 4.x. That's the client to connect to SA500 series router.
Please kindly request your rep to provide you with the correct Cisco VPN Client version 5.x image for Windows 7 machine. Please also advise your rep whether it's 32-bit or 64-bit.
The latest version of VPN Client is version 5.0.7:
For 32-bit: Filename is vpnclient-win-msi-5.0.07.0410-k9.exe (VPN Client Software for x86 32-bit version of XP/Vista/Windows 7 - Microsoft Installer).
For 64-bit: Filename is vpnclient-winx64-msi-5.0.07.0440-k9.exe (VPN Client Software for x86 64-bit version of Vista and Windows 7 - Microsoft Installer).
Hope this helps.

What to do with MPEG-1 Files!?!?

I am trying to blend some photos and video together to make a movie (and ultimately a DVD). I am totally flying by the seat of my pants here, but now I realize that the video files I was given are MPEG-1 and nothing on my machine appears to be compatible... and guidence about what I can do to convert the files or get the programs I DO have to deal with the files in their current form?
Thanks in advance.
Jen

MPEG Streamclip (free) can convert your MPEG-1 files to DV Stream for use in any iMovie version.

Firefox asks what to do with a PLS file

When I attempt to stream radio from the BBC site by clicking Listen Live a window opens which reports:
You have chosen to open: r2_heaacv2.pls, which is a PLS file, from www.bbc.co.uk
What should Firefox do with this file?
I need to know what to select?
Thanks

See if this helps you. <br />
http://www.ghacks.net/2011/11/29/play-playlist-pls-files-in-windows-media-player/

Anyone know what to do with this xml file

hi,
I have one problem regarding xml file.......i know xml parsing but now xml format is different so i can't manage properly......if u have any idea then pls tell me what to do.....
<getFriends generator="zend" version="1.0">
<key_0>
<firstName>Alain</firstName>
<lastName>Nicod</lastName>
<cities>
<key_0>
<id>0</id>
<city>St Prex</city>
</key_0>
<key_1>
<id>1</id>
<city>Cochin</city>
</key_1>
<key_2>
<id>2</id>
<city>surat</city>
</key_2>
<key_3>
<id>3</id>
<city>amreli</city>
</key_3>
</cities>
</key_0>
</getFriends>
I have put cities on didStartElement then its not giving perfet data so
what should i do now.........any idea about........
Thanks,
Haresh.

It is both easier and more complicated than that. I really can't give you any "sample code" because it isn't a coding issue. It is more of a data representation issue. XML is both a "simple" markup language and a complex data representation language. You need to read up a bit on XML to see what you can do with it. Come up with a test data set that is formatted the way that make sense to you. Or, maybe create a test data structure in your code and save that to XML to see how the native representation looks.
At that point, you will know what your input looks like and you will know what your output should look like. You just need a way to get from A -> B. For XML, the quickest way to do that is through XSLT.

What's wrong with my plist file?

Here's my plist file
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN http://www.apple.com/DTDs/PropertyList-1.0.dtd >
    <plist version="1.0">
    <dict>
      <key>Label</key>
      <string>com.homebrew.autoupdate</string>
      <key>ProgramArguments</key>
      <array>
        <string>/usr/local/bin/brew_up</string>
      </array>
      <key>StartInterval</key>
      <integer>86400</integer>
      <key>StandardErrorPath</key>
      <string>/usr/local/var/log/brew.log</string>
      <key>StandardOutPath</key>
      <string>/usr/local/var/log/brew.log</string>
    </dict>
    </plist>
`/usr/local/bin/brew_up` is just a script which calls `brew update`, `brew upgrade` etc
    #!/bin/sh
    echo `date`: Start updating brew
    /usr/local/bin/brew update && /usr/local/bin/brew upgrade && /usr/local/bin/brew cleanup
    echo `date`: Finish updating brew
Then I loaded that file by `launchctl load ~/Library/LaunchAgents/homebrew.autoupdate.plist`
Then I tried `launchctl start com.homebrew.autoupdate`, it also worked fine.
But the thing is, it won't start every 24 hours, as I'd expected. Actually now over 48 hours has passed, it's still not started even once. What's wrong here?
Then I changed `StartInterval` to `StartCalendarInterval`
      <key>StartCalendarInterval</key>
      <dict>
        <key>Hour</key>
        <integer>21</integer>
      </dict>
Then it was started indefinitely, here's the log file:
    Thu Aug 7 21:17:20 CST 2014: Finish updating brew
    Thu Aug 7 21:17:20 CST 2014: Start updating brew
    Already up-to-date.
    Thu Aug 7 21:18:14 CST 2014: Finish updating brew
    Thu Aug 7 21:18:14 CST 2014: Start updating brew
    Already up-to-date.
    Thu Aug 7 21:19:39 CST 2014: Finish updating brew
    Thu Aug 7 21:19:39 CST 2014: Start updating brew
    Already up-to-date.
    Thu Aug 7 21:22:28 CST 2014: Finish updating brew
    Thu Aug 7 21:22:28 CST 2014: Start updating brew
    Already up-to-date.
    Thu Aug 7 21:24:46 CST 2014: Finish updating brew
    Thu Aug 7 21:24:46 CST 2014: Start updating brew
    Already up-to-date.
    Thu Aug 7 21:27:03 CST 2014: Finish updating brew
    Thu Aug 7 21:27:03 CST 2014: Start updating brew
What the h*ll?

When I use
<key>StartCalendarInterval</key>
<dict>
    <key>Minute</key>
    <integer>0</integer>
    <key>Hour</key>
    <integer>21</integer>
</dict>
It's all good.
What's bugging me is why StartInterval would't work. Any when I wrote a simple demo about StartInterval, it totally worked!
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN http://www.apple.com/DTDs/PropertyList-1.0.dtd >
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.test.touch</string>
<key>ProgramArguments</key>
<array>
<string>touch</string>
<string>/tmp/touched.txt</string>
</array>
<key>StartInterval</key>
<integer>60</integer>
</dict>
</plist>

"No image found in subtitle script line" -- What's wrong with my FAB file import?

I've used Encore for years, version 4 and now 5.1 on both Mac and PC (Windows 7).
I export FAB files with bitmaps from my subtitling program and import them into subtitle tracks in Encore.
The last few times this has not worked. Every time I export FAB files and try to import them into Encore, I get the error message "No image found in subtitle script line." I've used different machines and different versions (4 and 5.1) of Encore.
There are indeed images (bitmaps) in the folder containing the FAB file.
Is there a solution to this problem?
Thank you!

I don't recall anyone describing this problem. If you can post a link to a short fab script, I'll test it in an Encore project. I am CS5 only, but it is worth a shot.

What to do with an ISO file?

Similar Messages

Maybe you are looking for