What to do with disabled

i have a disabled iphone and it tells me to connect to itunes but when i do it says it can't connect the device without ntering passcode what to do?

http://support.apple.com/kb/HT1212
Restore in Recovery Mode: http://support.apple.com/kb/HT1808

Similar Messages

What's Wrong with My Computer?

I have a G5 desktop computer, I believe it's referred to as a "Power Mac." My mom purchased it some years ago, I think in late 2005 shortly after this particular model was on the market.
Info is:
Version 10.5.8
Processor 4 x 2.5 GHz PowerPC G5
Memory 4.5 GB DDR2 SDRAM
Hard Drive 240 GB (127 GB unused/available)
My mother wasn't using this computer for many years, and my 13" Macbook was giving me trouble, so she gave this one to me. It's all been great (she maxed out the memory and hard drive space when she bought it, even though it is outdated and insignificant compared to current models), except for one little thing... Browsing the internet is usually fine when it's only one window, but not always. However, it is almost a guarantee that while trying to operate multiple windows and trying to play a video, Safari will crash. And not just once in awhile. I'm talking about on a daily basis. During regular offline computer use, like Photoshop or iTunes, the computer will sometimes grey over (as if someone put a fairly thick grey film over the entire screen), and tell me I have to restart the computer. So what's wrong with it? I presume it is a physical issue (failing memory, mother board, etc.), but what?

Your computer is not remotely "maxed out" with RAM.
You're describing a G5 Quad like mine (though mine was built in June of 2006), and maxed out means having 16 GB of RAM installed, like mine has.
The Frolick wrote:
…the computer will sometimes grey over (as if someone put a fairly thick grey film over the entire screen), and tell me I have to restart the computer. So what's wrong with it?…
That's called a Kernel Panic, and, yes, it is most often caused by hardware problems, such as bad RAM or mismatched RAM. I can't imagine how you get to 4.5 GB of RAM without exponentially increasing the risk of mismatched RAM.
RAM has to be installed in matched pairs, starting from the center slots and spreading outward: 4*3*2*1*1*2*3*4
On the other hand, my own personal experience has led me to conclude that Safari is a piece of cr@p. It causes problems just being active in the background, causing other applications to fail.
Check your RAM carefully, starting with just one pair of matched RAM sticks in the two center slots, then adding one pair at a time. Check your hard disk with Apple's Disk Utility.
The kernel panics can be caused by a damaged directory too, so if you own Disk Warrior, run it. If you don't own DiskWarrior, at least Repair Permissions with Apple's Disk Utility and use Verify Disk/Repair Disk with it.
I'd also recommend downloading and installing Applejack and run it according to the instructions.
Good luck.
2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.

Help!!! Locked out of DC with disabled AD directory Service !!!!

Hi there, I believe I just entered into the biggest hole ...
Was planning to p2v of a DC and read online to stop and "disable" all AD services.
Disable I did, and after installation of convertor software, windows updates I mistakenly did a reboot!!.
Now, I cannot login!getting "no logon servers available" ; I did create a local admin accoutn using command line, but just found that there is no actual local admin account on DC's, its only administrator account.
Am I screwed, the server is also an exchange server.! :(
Please please any ideas....any help ???????

Please note that the below procedure should be only used for a emergency purpose or for a LAB testing. Please don't simply use this in any ones server / Desktop as it is equal to Hacking.
Before you Perform. Please read your Country's Cyber law once.
===================================================================
Hey Karma,
The above option will not work.
Just tried it in the Lab.
So you download this password breaker ISO from the FTP link below which i uploaded and follow the instructions.
FTP link: http://depositfiles.com/files/i1sz0yv0c
It breaked my Local admin password in DSR mode.
Reboot the server and boot from the ISO i am giving.
Once you boot it will ask you for options from what you Want to boot from Now.
Select 0 and press enter - Which is clean boot from Active@Password Changer
Then pres 1 and enter and Then it will show you the partitions on the server. Select the partition where windows is installed and press enter and it will start searching for the SAM database where the Password is encrypted.
Once the search is completed it will show the SAM file and press enter to continue
Then the Local user accounts on that computer will be displayed
Select the number in Yellow mostly 0 will be for administrator. If it is different just see what number is in Yellow on the left hand side of the Administrator and press the number and press enter
It will ask what to do with account
Then use space bar key to select options by navigating using the arrow keys.
Select Reset password and Change password on the next logon. and Click Y
Your done.
Exit the program and restart the computer in DSR mode and Select .\Administrator and press enter. It will as you to set the new Password. Old password leave it blank and enter the new password and you are in.
Thats all
Gautam.75801

What is wrong with my Data Guard system?

What is wrong with my Data Guard system(10g10.2.0 on OEL5.0)? What method should I take to diagnose it and repair it?
After shutting down last night, my Data Guard does not run normally today.
On the primary database I issue the following commands:
DGMGRL> show configuration verbose;
Configuration
Name: sdb10g
Enabled: YES
Protection Mode: MaxAvailability
Fast-Start Failover: ENABLED
Databases:
sdb10g - Primary database
stdby10g - Physical standby database
- Fast-Start Failover target
Fast-Start Failover
Threshold: 30 seconds
Observer: hostp
Current status for "sdb10g":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show fast_start failover;
show fast_start failover;
Syntax error before or at "fast_start"
SQL> startup
ORACLE instance started.
Database mounted.
ORA-16649: database will open after Data Guard broker has evaluated Fast-Start
Failover status
On the physical standby database I issue the commands:
SQL> startup mount
ORACLE instance started.
Database mounted.
SQL> recover managed standby database disconnect;
Media recovery complete.
DGMGRL> show configuration verbose;
Configuration
Name: sdb10g
Enabled: YES
Protection Mode: MaxAvailability
Fast-Start Failover: ENABLED
Databases:
sdb10g - Primary database
stdby10g - Physical standby database
- Fast-Start Failover target
Fast-Start Failover
Threshold: 30 seconds
Observer: hostp
Current status for "sdb10g":
Warning: ORA-16607: one or more databases have failed
DGMGRL> disable fast_start failover;
Error: ORA-01034: ORACLE not available
Failed.
Message was edited by:
frank.qian
null
null

The primary database cannot be opened and the fast_start failover cannot be discabled:
SQL> SQL> ALTER DATABASE open
ERROR at line 1:
ORA-16649: database will open after Data Guard broker has evaluated Fast-Start
Failover status
DGMGRL> disable fast_start failover;
Error: ORA-01034: ORACLE not available

What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out

What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out?

The Firefox versions which come with many Linux distros have the default Mozilla Firefox updater disabled and use the distros built-in updater.
See this - http://linuxforums.org.uk/netbooks/install-firefox-6-on-an-acer-aspire-one-running-linpus-lite-linux/

What's wrong with my iMac G3?

What's wrong with my iMac G3?
Ok. I'm going to attempt to be as thorough as possible on this one. When I first got my iMac G3, it was stated to be non working. I got it from freecycle. The lady who provided my with the machine said that "one day it just wouldn't turn on". So, I still took it home. After I set it up, it turned on and booted into Mac OS 8.6 no problem. After about two days of using it, I turned it on again and it said something about "finder could not be started because draglib-setdragimage (or something like that) could not be found." It gave me a restart button, which I clicked. After about a day of messing around with it, I found that holding the shift key to disable extensions would allow it to boot properly. I decided to re-install 8.6. However, the cd was not recognized (perhaps because it was an ISO, not DMG). So, I proceeded to install panther. The first time it booted with the panther cd (and ever since), there has been no startup chime. It also will only get to the apple logo, without the spinning thing, where it freezes. Only the button on the keyboard works to start it up. And, occasionally it will boot into open firmware. I don't know what to do from here. I can still boot into os 8.6 with extensions off.
Help?
Thanks so much in advance,
-Don

And, occasionally it will boot into open firmware.
Seems odd to me. All by itself? Did you press any keys?
I don't know what to do from here. I can still boot into os 8.6 with extensions off.
Most likely, you have a bad extension. They are in a folder called extensions What you need to do is create a new folder and move extensions to this folder. Move extensions to the folder in groups. try 1/2 first. Move back & forth between folders. See which extension is causing the problem. command + n to create a new folder
verify that you have the correct firmware.
Figuring out what level of firmware you have?
1) Mac OS 9.x or 8.x, you need to use the Apple System Profiler.
Apple -> Apple System Profiler
2) Mac OS X, use the System Profiler.
Apple -> About This Mac
click on the More Info... tab
click on Hardware
read the Boot ROM Version
3) Open Firmware, boot into Open Firmware.
Power on your iMac while holding down commandoption+of
The first output line contains the firmware level. Mine reads:
Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
Copyright 1994-2001 Apple Computer Inc.
The 4.1.9f1 will be different on a 333 machine.
What firmware do you need?
http://docs.info.apple.com/article.html?artnum=86117

TS1363 My iPod doesn't turn on anymore. Even when I plug it into the computer or a charger, nothing happens. What's wrong with my iPod?

My iPod doesn't turn on anymore. Even when I plug it into the computer or a charger, nothing happens. What's wrong with my iPod?

If you get an network timed out error, try disabling the security software on your computer.

My iphone consumed 10GB data this what's wrong with my VPN kindly guide suitably moreover battery drain fast

My iphone 5s consumed 10GB data this what's wrong with my VPN kindly guide suitably moreover battery drain fast

The long backups seem to be related to the size of the apps you installed, not the number. That's why some people with multiple pages of apps experience fast backups. There does seem to be a bug with the current firmware that can cause a crash when doing app uploads and syncs. This bug seems to be exacerbated by having large and many apps.
I was experiencing frequent crashes, but have no more - even with 70 apps installed - some of them large like the American Heritage Dictionary which is several hundred megabytes. I did the following:
1. I set iTunes to NOT do autosyncs every time I plug in. This setting is in the Itunes preferences.
2. I disabled the autobackups in iTunes for the iphone. I figured that if it did crash and it was going to take 2 hours to restore, why not just reload. The instructions are readily found using google search; it involves a command line setting. Anyway, the phone doesn't crash anymore since doing this.
3. I no longer install apps using the iPhone. I first install the app in iTunes and the I manually sync it to the iphone. I avoid doing multiple installs at once; at least for the large apps. Right click on each app and get its info from within itunes. If it is large, it is going to take time to backup.
4. I always first shut off the iphone and restart it before installing any apps in itunes. This clears any memory issues left behind from use.
I am going to continue to do these procedures until Apple releases a fix for the bugs relating to the apps.
As noted, since I took these steps, I have had no crashes. I was crashing at least once every 1-2 days before with the same or less number of apps. I too was a first gen iPhone user and was very frustrated with the 3G experience. Since doing the above, I am once again a very happy and productive iPhone 3G user. I know its a pain to do this, but the bugs will get fixed at some point. I would never go back to my old phones - they were just phones.

What's wrong with this benchmark

i fromatted my hd, installed a new fresh os xp, latest drivers for all devices, benchmarck with 3dmark2001se give me 5200 points, 3dmark03 give me 2008 points.
even i tried to disable the oc, so i return the fsb to 201 ram to 400 and spd, then 3dmark is the same range, when i expect for this vga crad a pretty higher points!!!
what's wrong with me???
help me plz

hmm im not sure about that but i think thats making your card run at agp2x?
wierd.. you are using the 53 forceware drivers right? hmm i think if you use a proggie called rivatuner (google it) you can set it to 8x..
im using the 45.somethingerather drivers which have been modded - omega release
you can get them from http://www.omegacorner.com i think. they are realyy good u might want to try them.

I have a problem with disable my account in apple store

hi i got a problem with disable my account apple store... so what should i do?

You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it.
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

What if sync with new computer does not work. logical connection to old with WindowsXP, 32 bit version of iTunes. New is Windows7 with 64bit version

What if sync with new computer does not work?
logical connection to old with WindowsXP, 32 bit version of iTunes.
New is Windows7 with 64bit version

Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
If your iPod can't be recognized by Windows, try these tips: iOS: Device not recognized in iTunes for Windows

When i use the apple store, Your request is temporarily unable to be processed. what is wrong with it? can someone help me?

when i use the apple store, Your request is temporarily unable to be processed. what is wrong with it? can someone help me?

Try turning off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall
Disable anti virus software if you have that installed before downloading media from the App Store.
When you post for help, please tell us which Mac OS X you have installed. Thanks !

Nano 6th turns on for a few seconds then screen goes black and nothing. what is wrong with it....

My 6th gen nano turns on for a few seconds, then screen goes black and nano goes off. what is wrong with it? can any one help me out? do I need new battery? do I need a full repair? or is there something I can do myself to fix it. Thanks for your help.

At the moment I say as I've fixed, momentarily:
I made a downgrade to 1.0
The problem, gentlemen, is the upgrade from 1.1 and 1.2
It is a pity that I lost all the new features offered by the new firmware , just because Apple staff could not think to try this new update, on ipods with some airtime.
I hope Apple pull out a version 1.3 with the ability to choose the feature detection, and the user can disable it at will.

What do clips with diagonal stripes mean in the timeline???

If you look at the two video clips labeled "R21" in my timeline, you can see that there they have diagonal lines through them. Can anyone tell me what that means?
I don't think they're offline because otherwise I would see the usual multi-lingual notice in the program monitor window indicating "offline"
Thank you in advance.

Hi Kevin,
Haven't had any issues with out of sync clips. What seems strange is the the monitor window is black yet the clip isn't disabled. And I don't believe it's offline. But do you know what a clip with diagonal stripes through it means in Premiere? I've looked elsewhere online, even in Premiere's help section and haven't found out what this means. Thank you very much for your help.

What to do with the CPU whine?

I have a Core 2 Duo 2,16Ghz White Macbook bought a month ago. It has the infamous CPU (or logic board) whine - which Apple aknowledged on their MacBook Pro line. I have gone to the local Apple dealer where they said yes it whines but that Apple hasn't issued any orders as to what to do with the whine so try to put up with it... not very nice actually.
The Macbook whine behaves almost identically to the Macbook Pro whine, so you can minimize it using PhotoBooth and some other programs. And using a Apple Might Mouse Bluetooth also takes the whine away (because the cpu is less idle).
How can i get rid of the whine (high pitched noise-buzz)?

I've seen quite a number of posts on the whine from various manufacturers. HP has actually posted a BIOS update to address the problem (at a significant cost to power management):
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c00965412&cc=us&dlc=e n&lc=en&jumpid=regR1002USEN
As the MacBooks (and MacBook Pros) don't have a BIOS, Apple would have to push out an EFI firmware update. I would certainly prefer that if they go this route, they give you an option in preferences to either enable or disable the power saver features.
Here is another comment referencing the whine other machines:
http://forum.notebookreview.com/showthread.php?t=103747 (Toshiba, Sony, and HP)
Unfortunately... I don't see any easy fix to this. I would imagine it is possible that some logic boards may exhibit the problem to greater or lesser degrees, but there would be no way to guarantee that replacing the logic board would result in a machine with less whine.

What to do with disabled

Similar Messages

Maybe you are looking for