What to do with X in Wifi icon?
MacPro new last year, running Yosemite, suddenly has an "X" in the middle of the WiFi icon and won't connect to any wifi network.
I have now attached a copy of my VI. What I've been asked to do is produce a sine wave with the amplitude and frequency adjustable via controls on the front panel, which I have done. However I also need to display a section afterwards. I know I can wire up a control to the phase of the simulate signal VI, so do I have to just use the simulate signal VI twice, once with the full sine wave and once with the phase shift, or is there a less convoluted way of doing this?
Attachments:
Screen Shot 2015-02-10 at 10 Feb 2015 18.58.51 (2).png 688 KB
Screen Shot 2015-02-10 at 10 Feb 2015 18.58.51 (2).png 688 KB
Screen Shot 2015-02-10 at 10 Feb 2015 18.58.51 (2).png 688 KB
Similar Messages
-
What is up with the new "eye" icon in itunes 7, "quickly browes library ???
i have clicked on this "eye" icon (bottom right corner) and it does nothing...what is it supossed to do and how do you use it ?????...also want to add my sadness about the lack of function this 7 version has over previous (visualizer, equalizer...i'm sure ther is more i've only touched on using this itunes)
t-9
apple powerbook g4 Mac OS X (10.4.7)hey thanks, i was on the album cover viewing screen which the 'browser' doesn't effect. the 'conrtol' B does work also...i'm not a computer pro so i learnt something new with the 'view' panel !!! thanks
apple powerbook g4 Mac OS X (10.4.7) -
IPhone WiFi connected with checkmark, no WiFi Icon, No IP addresses listed!
No matter what I do, I cannot connect to my WiFi. I see the SSID with a checkmark in front of it, I entered the correct WEP password (in hex), I "forgot" the network and tried over dozens of times, I still cannot connect.
I always get the E for edge connection.
More strangely, I **NEVER** see any IP addresses listed in the fields!I have a similar problem. When I leave home and then connect to another WiFi network, upon my return home... The Edge wants to take control even if I select my HOME Wifi. I go to Settings/General/Reset/Reset Network Settings. Then I go back, select my Wifi home network, and make sure it is WEP Hex. No problem, but I do this almost daily. I sure hope that Apple issues an update for the software to cure this problem. When I called "Customer Service" the annoyed lady on the phone walked me through what sounded like a script. I asked her if she had this conversation much. She told me "at least 30 times since my lunch break".
-
What is wrong with my iPhone5 wifi radio. Pos!
New iphone5 wifi is worthless!! What is the fix?
try to reset your router, try to restore from iTunes. if still not working go get refund or replaced
-
It is taking literally hours for movies to load on Apple TV using both NETFLIX and iTunes. I have a strong wifi signal and according to the connection test, all is well. What's up with that?
Wifi signal and connection test don't really give a good indication of where things are at
Check speedtest.net to see actual connection speed, needs at least 6mbps consistently for instant HD stream
Check istumbler.net or netstumbler to verify interference
Male sure you are on the ISPs DNS (settings - network - configure DNS - automatic) -
My Wifi doesn´t work. The Wifi icon on top menu bar states there is no hardware connected. How can I resolve this as previously Wifi connection worked perfectly. Is this something that to do with the computer hardware? Please advise.
SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck. -
Hello,
My macbook pro wifi stop working suddenly, and know appears a X on the wifi icon, what may have happened?
Its seems to be the harware.Hello raphaelitajuba,
The article linked below provides information regarding this indicator and steps that can help restore functionality to your MacBook Pro's Wi-Fi.
AirPort has detected a problem with the driver or a necessary sub-system component, apply the latest manual AirPort software update or reinstall Mac OS X. If reinstalling Mac OS X does not correct the problem, take your computer to an authorized Apple service center.
The AirPort status menu (AirPort Menu Extra) FAQ
http://support.apple.com/kb/HT3821
Cheers,
Allen -
my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.
Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article.
Step 2
If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it.
Step 4
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
Wifi icon in menu bar dimmed with and "x" over icon
Macbook Air 11-inch, mid 2013, OS X Yosemite, all software is up to date. My wifi icon appears as dimmed in the menu bar with an "x" over it. I have used network assisrant, diadnostics, fallowed all instructions properly as promted to do so. How do I enable wifi?
I bet you have a Samsung laser printer, don't you?
And if so, it looks like you were dumb enough to put in the included CD! Don't! Those CD's are for the Windows Users!
Look what happened! It now installed the SmartPannel that is very un-fun to remove. Lucky for you, I re-looked up for you how to do it....as when I first got my mac, I too was dumb enough to put in that disk and got frustrated when I couldn't make the icon go away.
so . . . in:
~library/printers/SmartPanel
there is a script called iLaunchSP....Trash it!
Reboot!
It will be gone! -
My macbook air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbookpro that is able to connect with no issue. HELP
Reset the TC to factory and start again.
Use all SMB type names for wireless and base station.. Not apple type names.. this is more important since Mavericks.
I also recommend different names for the different bands.
So for example.
TC name.. TCgenx (I use whatever the generation number is for the x.. eg TCgen4 or latest one TCgen5)
WIreless name.. TC24ghz for 2.4ghz
TC5ghz for 5ghz
You can also set the channel manually.
If you still have issues.. start with no security and then if it fails to connect there is something seriously wrong with the laptop. Did you upgrade install Mavericks?? That can lead to driver issues.. I would recommend a clean install. -
I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
what's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?
Hey aries35,
I found the following that goes over troubleshooting the same issue for the iPhone. I know you have an iPad, but the steps should still apply:
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
via: iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Cheers,
Delgadoh -
My I phone 5c won't connect to my wifi what's wrong with my phone?
My iPhone 5c won't connect to my wifi. I am using my ipad connected to my woof right now. What's wrong with my phone?
Any problem connecting your iPhone to any other wi-fi network besides your own?
http://support.apple.com/kb/TS1398 -
I have just bought an ipad with retina display wifi and 4g 16 gb - how can I check that this is what I have been supplied with
Identifying iPad Models:
http://support.apple.com/kb/HT5452 -
My computer seemed locked up, nothing would open. I had to force quiy everthing. I tried to normally shut it down and it wouldnt shut down. I held the on off power switch. When I tried to turn it back on It stays tuck on the white screen with a flashing folder icon with a question mark in it . Has my hard drive gone bad?
Reboot the computer holding the option key down, you will get a selection of your OS X internal boot drive or the perhaps the disk you stuck in.
You can choose what you can boot into.
If it's the hard drive and it's there, then select that and head to System Preferences and change the startup disk to the hard drive, you shoudl be fine.
If only to disk, then select that and run Disk Utility > Repair, If your drive doesn't appear on the left, it's likely dead.
Repair the drive and reboot holding the Shift key down, see if that fixes things some more and reboot again normally.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents
Maybe you are looking for
-
If I pay for extra iCloud storage will I be able to download more of my magazines?
If I pay for extra iCloud storage will I be able to download more of my magazines?
-
I bought ringtones a few months ago on my iphone 5s and I sync it regularly to my laptop. I recently reset it and the ringtones will no longer copy back to my phone and wont let me redownload them. Do I have to repurchase them or is there another wa
-
I have an empty folder and 3 .jpg files stuck on my desktop. When I drag them to the trash I am asked to enter my administrator's password. I do this but the files and folder will not delete. I have checked 'Get Info' on each of them and they are
-
Problem in embedding a png file for a button's skin
I am trying to embed a png graphic as a skin for a button using actionscript class for a custom component. It has an error: "unable to resolve 'btn.png' for transcoding" - see method 1 code below. However, it works fine in method 2. Code are all show
-
Skip only Archiving data from ECC to HANA through SLT
Hello, SLT is configured between ECC6 as source and HANA as target, real time replication is enabled. I have a situation, where I have to skip the replication for only those data which are deleted from the database after archived. But normal deletion