What to install first: Snow Leopard or FCP Studio 3 upgrade

Ok, I will be finishing a big video project soon and will finally be able to upgrade to Snow and FCP Studio 3. I was wondering would upon the order of those installations, and whether or not it mattered in terms of optimization of FCS's performance? So, being that Snow is a complete rewrite under the hood, would it be better to do that first then install FCS upgrade on top of that, or the reverse?
thanks

http://discussions.apple.com/thread.jspa?threadID=2113535&tstart=0

Similar Messages

Missing install disc (Snow Leopard) for OS X upgrade

Hi, I am going to upgrade to Mountain Lion OS X from Snow Leopard 10.6.8 when it releases, however, I DO NOT have the original SL Install Disc.
I read that there are certain steps that one needs to take to prepare a computer for this upgrade so that it goes smoothly. One of the things on the list is to do a hard drive verification for errors. I can do this in Utilities but it prompts me for the Install Disc in order to repair. It shows two minor errors (Invalid Volume File Count, Invalid Volume Directory Count) that need to be addressed and repaired but I can not continue without the Install Disc. Any suggestions?
Also, a friend has the same SL version install disc. Can I use his or do I need the ORIGINAL one that was originally installed with my iMac? I don't know if the MODEL INDENTIFIER, BOOT ROM VERSION and SMC VERSION will be affected since they are two different machines. Please help!
I can always contact Apple but was trying to avoid any additional costs of replacing the disc since I plan on purchasing a disc for the upgrade to Mountain Lion.
FYI, my iMac runs flawlessly right now and is loaded with software. I am so afraid I will have issues with software if I use another disc and I don't want to go through reinstalling all my software programs. It is a lot. I am hoping it will be okay but I wanted to ask anyone on here first.
Can anyone advise?

Firstly, order the Snow Leopard DVD from Apple's Online Store even if you don't currently need it. Download and save the Mac OS X 10.6.8 Update Combo v1.1 updater in your Downloads folder.
Secondly, you can use your friend's Snow Leopard DVD to do disk and permissions repairs, but not to install OS X on your machine.
Thirdly, follow these instructions:
How to Install Mountain Lion Successfully - You must have Snow Leopard 10.6.7 or 10.6.8 Installed
A. Repair the Hard Drive and Permissions:
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.3.) if DW cannot fix the drive, then you will need to reformat the drive and reinstall Snow Leopard.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the backup volume. Source means the internal startup volume.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade to Mountain Lion:
Purchase the Mountain Lion Installer from the Mac App Store. The download will start quickly. Mountain Lion is around 4 GBs so a fast internet connection is essential. Download time could run upwards of 4 hours depending upon network conditions and server demands at the time.
The installer will start automatically after the download is complete. You should save a copy in your Downloads folder because the installer will delete itself automatically after the installation is complete.
Follow instructions for installation.

Can I use install discs (Snow Leopard) from MBPro to upgrade desktop?

I'm having issues with my iMac (mid 2007) which has been upgraded to Leopard so far (when Leopard came out). I have Snow Leopard discs that came with my Mac Book Pro. If I do a clean install of my iMac, can I use the Snow Leopard discs to do the new install? What worries me is that the discs specifically say "13 inch MacBook Pro" Mac OSX Install DVD. Does this mean I can't use them on my desktop? Are their install discs specifically for laptops vs desktops?

Nancy Alineri wrote:
I'm having issues with my iMac (mid 2007) which has been upgraded to Leopard so far (when Leopard came out). I have Snow Leopard discs that came with my Mac Book Pro. If I do a clean install of my iMac, can I use the Snow Leopard discs to do the new install? What worries me is that the discs specifically say "13 inch MacBook Pro" Mac OSX Install DVD. Does this mean I can't use them on my desktop? Are their install discs specifically for laptops vs desktops?
You can not use the disks intended for the MBP on your iMac. Buy a retail copy of SL ($29) or contact Apple for a replacement of the original disks for the iMac.

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

I have upgraded my snow leopard to mavericks. Now I want to install the snow leopard in a hard disk partition. But the mac refuses to start the installation app on the snow leopard dvd. What to do?

I have upgraded my snow leopard to mavericks. Now I want to install the snow leopard in a hard disk partition. But the mac refuses to start the installation app on the snow leopard dvd. What to do?

Restart the computer with the disk in the drive and the C key held down.
(107242)

I had this imac 27" two years ago,updated to snow leopard 10.6.8 and suddenly the imac shut down and able to start again from the beggining,i had the leopard 10.5.8 and my problem is i cannot re-installed my snow leopard.Do i have to update my old leopard

I had this imac 27" two years back(leopard 10.5.8) and no problem was encountered so far! (thanks 4that),i always made an update as far to snow leopard 10.6.8. Unfortunately when i did some application /downloading,the system was off and when i turn it On the logo of an apple only came.So what i did is to start all over again,now i am two years old back with Leo-10.5.8,My problem is i cannot install my snow leopard,it reads that i have to clean tha disc which i did and thru utility disc.Any help please and i really appreciate to every1 helping me to solve the problem.I will keep in touch.
Many thanks! - Angel

BTW,I purchased the SL by retail and originally installed for the first time in my IMAC 27" ,unfortunately during the upgrading of the system,suddenly it was totally gray.then off as it killed my imac.i switch it On but only the apple logo came and waiting for so long.I tried to start from the very beginning,installed the DVD installation that was originally came from imac..it works and i have now the latest version of Leopard 10.5.6...then .8 thru updates. My problem is i cannot re-install my SNOW LEOPARD that i purchased from retail store..proceeded to install in my imac but everytime it ends with 'FAILED-pls clean the disc" i did the cleaning but still the same,:installed failed!-The installer could not copy the necessary support file",i tried booting from the disc holding C down but no luck at all. Anybody can help me please. Many thanks ..

Juniper networks VPN: Network Connect will not install under Snow Leopard

Created different thread based on the topics from http://discussions.apple.com/thread.jspa?threadID=2130935.
With new install of Snow Leopard i get the following when trying to log into SSL VPN "Could not launch. Please restart the web browser and try again"
can not do the workarounds from the above thread since none of the directories exist. Has anyone found a fix for this?

I ran into this too (made matters worse by cleaning out the old juniper install). What I understand clearly now, which other discussions with all the happiness from people saying they fixed it seem to miss completely: Juniper only works if you installed it prior to upgrading 10.6. If you did not, you are possibly hosed.
Now, I was hosed, but I found a workaround. Find a stand-alone installer .dmg out there. As of a couple days ago it was there. I'm sure it still is. Google it. NetworkConnect.dmg.
It is version 6.0.0. It installs correctly. My company runs 6.4.0, which means the first time you open NetworkConnect after installing it prompts you to upgrade. The upgrade worked fine, so long as I was running as root.
Which brings me to my original problem which I've not seen anyone else complain about, which has me worried: after installing, NC only actually connects and functions when I run as root. I'm not talking about su - root or using sudo, I mean having to graphically switch users and log into the computer as the root user (after enabling it...using the scenableroot I think, something like that).
Has anyone else seen this behavior? I can launch Network Connect as my real user but it immediately fails with a software error. 'ncproxyd.error: Failed to gain root privileges'. Driving me batty.

Can't open Virtual Machines after "Archive and Install" of Snow Leopard OS

Hi all,
Please bear with me while I provide a bit of background info for my issue:
I just installed a copy of Adobe Photoshop CS5, during which I was actually forced to archive and install my Snow Leopard because of an installation error. So, I inserted my Snow Leopard disc and let the OS X installer do its thing. I remember, somewhere along the way, an admonishment that this process may somehow corrupt any virtual machines that may be installed, but throwing caution to the wind, I went ahead anyway.
Well, turns out it did indeed corrupt my installation of Parallels 6 somehow, and now none of my VMs work. When I open Parallels, and select File -> Open, then select whichever VM I want, a screen flashes so quickly I can't see it (I assume it says something like "Opening XYZ Virtual Machine"), and then.......nothing.
Thus far, I have tried to uninstall and reinstall Parallels 6 (using the KB article that directs you to delete a bunch of files via Terminal after running the packaged uninstaller) and I deleted my VMs and restored backup copies of them from several months ago.
I'm now at a loss - any ideas what I can do to get Parallels to function again? I don't know if somehow permissions were modified, or if there are any other particulars that the reinstall of Snow Leopard may have made to cause parallels to be unable to open my VMs.
Appreciate any advice in advance!

I think I would look at if you have the latest Parallels;
clone and backup your system and files before doing anything;
boot off 2nd hard drive and run Apple First Aid + (Disk Warrior or DG3 or TechTool Pro 5).
Always be prepared to be able to restore your system to prior point, that could even mean keeping 10.6.4 around for a month until you know 10.6.5 and 3rd party software and drivers all play nice together.
Bottom line: invest in two backup sets and methods; a copy of SuperDuper or CCC; and Disk Warrior.
I've used VBox, Fusion but not Parallels, plus Windows XP Mode, VHDs and VMs under Windows Vista/7.
I'd go back to ERASE and INSTALL and then do all your updates, then start on 3rd party with main packages first (CS5 and others). Off load, save, backup everything and anything you might need first of course.
Last but actually #1: a small 30GB OS X 10.6.5 drive volume (can take the 30GB from one of your backup drive is fine) so you can run the latest DU plus other system maintenance (DVDs get old, out of date, slow to boot, can't use Finder and other programs).

Archive and Install in Snow Leopard?

I'm currently running Snow Leopard, and would like to Archive and Install. While attempting to Archive and Install, I wasn't given an option, so I quit the installer before the operation went too far.
How do I perform an Archive and Install with Snow Leopard?

You seem a little confused about all this. You said you wanted to Archive & Install 10.6 to get a "mostly clean copy" of the system. That's exactly what just running the Snow Leopard installer again will do. An Archive & Install option would do that too, but (assuming it worked like the old one) it would also create a "Previous Systems" folder, move the old system to it, & deactivate it. There is no way to reactivate this archived previous system once deactivated, if that is what you were thinking -- it is just a way to preserve items that you might need to add back to the newly installed one later on, like third party extensions or a user folder if you opted not to preserve users during the A&I.
Note that you do not need to erase anything first unless you want to clean out everything, including user preferences, system settings, & anything else that might be causing the problem. This would be true even if an Archive & Install option was provided, since it doesn't clean out those things either.

Fresh Install of Snow Leopard & CS5

I have a MacPro Intel early 2008 with (4) internal hard drives. I am currently running CS Design Premium CS4 from my Leopard 10.5.8 OS system.
I just purchased the following:
• A new 1-TB Internal Hard Drive (My plan is to temporarly remove one of my internal scratch drives and plug this new drive in its place. This will be the drive that I will install Snow Leopard on as well as CS5 Design Premium Upgrade as well as migrate all my existing apps to from my current boot drive. Once everything looks like it is operating correctly, I will remove the current boot drive permanently, make this new drive the default boot drive and reinstall my scratch disk drive in the slot vacated by the current boot drive - at least that is my current plan)
• CS5 Design Premium UPGRADE
• Snow Leopard Install Disk
My question is what is the best method to attack this major overhaul?
(1) Should I DEACTIVATE CS4 on the current boot disk before starting this install process?
(2) Should leave CS4 ACTIVATED on the old drive, install Snow Leopard on the new drive, then migrate all my apps including CS4, then DEACTIVATE CS4 on the new drive and then install the CS5 UPGRADE?
I am totally confused on how to properly make this transfer?
Bottom line is that I want a clean install of Snow Leopard on the new internal drive and perform a proper install of CS5 Design Premium UPGRADE on that same drive.
Thanks for any suggestions.

1. Deactivate CS4. It takes seconds.
2. Install the new drive. Install Snow Leopard.
3. If you still want to use CS4, install that followed by CS5. I would highly encourage this since if you do need to use CS4 down the road, you'll need to uninstall CS5 first as the suites need to be installed in order (unless something's changed in CS5).
Bob

SSD Issue: Can't Install OSX-Can I use Target Mode to Install OSX Snow Leopard onto a laptop?

Cannot reinstall my OSX Snow Leopard from my original disks: 2010 MacBook Pro 7,1.
Cannot do a Recovery Install—just put in a solid state drive, and have to do a clean install, cannot clone old OS off the old hard drive.
Can I make my tower/desktop computer work somehow, I have a .dmg Snow Leopard Installation file on my tower. I'm out of options; I've tried to do a recovery download of Yosemite and usb startup thumb drive. Nothing is working: crashing, stopping short of full installation.
I'm just trying to get any operating system to install on the MacBook Pro. Nothing seems to work.
-the old hard drive had issues that couldn't be resolved, seemed like software.
-swapped it out with ssd drive, had made backup of all files.
-tried to startup with installation disks/ original osx snow leopard disk. Failed, wouldn't complete
-tried to do recovery download installation via internet, cmd-r, with Yosemite but that seems like a long shot. Just kept stalling, so it seems like this model cannot support that os without first having the original os?
-made a thumb drive an installation of osx 10.6.8
-nothing is working

Since you provide no information regarding what has happened other than it didn't work, how can we help you? I can only give you the whole process:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the SSD's entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. You can now log onto the App Store with your Apple ID. Go to your Purchases page and re-download the last version of OS X that you purchased and/or downloaded prior to the release of Yosemite.

I have been installing the Snow Leopard upgrade for 3 hours. Is this normal?

I have been trying to install the Snow Leopard uprade that I received from Apple Inc., but it has said that it will take 45 minutes for the last 3 hours. Is this normal?

Are you referring to the Snow Leopard DVD? What specific model are you installing it on? Are you upgrading an earlier version of OS X? Did you do this before attempting to install the upgrade:
Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
An upgrade can take a couple of hours but usually 45-50 minutes would be normal.

Can't install snow leopard on partition after upgrading to lion

I rushed out too early to install Lion via Apple Apps store. Now, I realize that Rosetta is gone and so are my options to use older apps. As I was reading on the web and Apple Support, I have tried various things and get a window saying that I can't install snow leopard.
I have never partition my hard drive, but using disk utility I created a partition called "Snow Leopard." It divided my HD in half which is okay. I closed the disk utility window, rebooted holding down the "C" key, and saw the OS X Install DVD. When I select it a window pops up saying, "You can't use this version of the appl inst Mac OS X with this version of Mac OS X. You have installed Mac OS X 23.1.1."
Before downloading lion, I made a backup of my existing HD using Time Machine to an external HD. When I open up a saved version dated a month ago, I see that the applications that were working in snow leopard now have the icon circle saying that it is not supported by lion. This is strange since I used Time Machine to back up my HD, then turned off the app before downloading lion. Even older versions saved on the external HD show the circle.
I read about lion and the "Recovery HD," but when I hold down the Command-R key nothing happens when I restart my computer. It also talks about using the option key but that does not work. It talks about reinstalling lion using this system, but I don't see it working.
How can I install snow leopard on my new partition, then I would go to "Software Updates," to get the latest version, or use one of the versions on my external HD to have both operating system.
Thanks,
DaisyMay

Hi Scottiemn,
As I was trying different things to make a partition on my HD, I made notes as to what I did, and I finally got it to work. I will try to explain what I did.
Before installing “Lion,” I backed up Snow Leopard using Time Machine to my external Seagate HD. I installed “Lion,” and found out that I could not use some of my old apps, so I did the following.
Since I am running “Lion,” I opened up disk utility and selected my MacHD (1TB), then I selected partition, and it showed “Macintosh HD” under the partition information name. I believe I selected the plus, + and it divided my HD space in half, and I named it Snow Leopard.
I then installed the Snow Leopard DVD, and restarted my computer holding down the “C” key, I held it down for about 30 seconds or more and then took my finger off of the key. As I waited I finally saw that I was on the install DVD, and on the top menu bar I saw “Utilities.” I had my external Seagate HD mounted on my desk top before I restarted my computer, I selected the “Utilities,” on the menu bar and it gave me the option to back up from Time Machine, I selected my external Seagate HD to the newly created partition I named Snow Leopard and I said “Yes.” I followed the instructions and after it was done, I went to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with Snow Leopard. On my desktop, I can see two Hard Drives, one is Macintosh HD with “Lion,” and the other is Snow Leopard.
Then, I started up my computer and I was on the Snow Leopard partition and I saw all of my apps working. I then went back to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with “Lion,” and restarted my computer and I was running “Lion.”
I am not sure why I was not able to use the DVD of SL before, but somehow I got it to work, and I hope that I have explained what I did above.
One thing, when I installed “Lion,” from the app store, I did not make a bootable DVD of the application. I went back to the app store and downloaded “Lion” again and kept it in the dock until I got Snow Leopard to work. I burned a DVD of “Lion,” and so I have a backup of it.
Since my Seagate HD has only 250 GB of space and it is an EIDE HD 7,200 rpm using an OWC Mercury Elite FW400/USB2 with the Oxford chipset 911 enclosure which I bought in 2008, I decided that since I now have my 27 inch iMac quad core i5 with 1TB that I needed a larger hard drive.
I researched the web and decided to go back to OWC and just bought a 2.0TB OWC Mercury Elite Pro “Quad Interface” 64MB with eSATA/FW800/FW400/USB2.0 with 7,200 rpm speed for $219.00. I partitioned it for Time Machine, and Carbon Copy Cloner.
I ran Time Machine, and both partitions “Lion, and Snow Leopard” are on the Time Machine partition and both HD’s are under the Carbon Copy Cloner.
I am self taught on my many iMac’s over the years, and I go to the forums to ask questions and follow the helpful hints to resolve my problems. I carefully try different things and write down what I did so I don’t repeat things.
I hope that I have explained what I did, and hopefully it will work for you.
When I want to run SL, I select in the System Preferences to start up from that disk, when I want to run Lion, I go back and select that and start up my computer running Lion.
Since I have many old apps that Rosetta uses to open them up in SL I wanted to keep that operating system. I will go back now that I have everything working and see if I really need them. I won’t rush to remove my SL partition that I created, but in time if I don’t need the older apps then I may clean out my system and just run Lion.
I run Lion now all of the time, but when I need to go back to SL, I now have the option.
Good Luck,
DaisyMay

Just purchased a ipad2, could not us it on my MacBook 10.4.1 - Purchased and installed OSX Snow Leopard 10.6.3 - downloaded and installed latest itunes, set up a itunes accounts and tested by purchasing an album and app, ipad does not show in devises?

I just purchased a ipad2, it would not work on my MacBook 10.4.1 I purchased and installed OSX snow leopard 10.6.3 downloaded and installed the latest itunes, set up an itunes account, purchased some music and apps. When i plug in my ipod it shows up and works, but when i plug in my new ipad the ipad screen comes up with a display of a cable and itunes but does not show in devises, i have tried all the resets and different USB ports with no success. Any ideas short of selling it on ebay or buying a new computer?

If you've already tried the usual rebooting of the computer and ports and stuff, there is only a few things left I can think of. It's possible that when you updated iTunes it didn't fully replace all the files, so I suggest just manually removing iTunes and then reinstalling it.
Try removing iTunes manually first http://support.apple.com/kb/HT1224 then download a fresh copy, make sure it is 10.3.1
It is essential that you go through Finder to remove those files it mentions. Otherwise they won't be reinstalled when you run the installer again.

Had to wipe my drive so I could do a clean install of snow leopard Now I look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old sett d

Had to wipe my drive so I could do a clean install of snow leopard. Now I have look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old settings. The instructions I have found or no help or needs more clarafication on what to do.

Use migration assistant to move your files. http://support.apple.com/kb/HT4889

What to install first: Snow Leopard or FCP Studio 3 upgrade

Similar Messages

Maybe you are looking for