What to send in DHCP's Discover Option 61 Client identifier?

So i'm trying to use my own router, and it HAS TO include Option 61 "Client identifier" in it's DHCP Discover packet. But i noticed that if that option is included i don't get a DHCP Offer back from FiOS! I tried throwing my MAC in there but no love. What does FiOS expects to see in there? It's a very technical question so if i can't get help here how can i contact an engineer that would be able to answer this?
Thanks,
Alex

Welcome to the forums. Just so you know, this is a peer-to-peer support forum. Verizon does not answer questions here.
Sometimes the Verizon moderators escalate issues to the support team, which is an extension of the Verizon folk you can reach by using the "contact us" link at the bottom of these pages. If that happens to your issue, be sure to follow the instructions the moderators post.
Unfortunately, I do not know of any methods to reach Verizon's network engineers. They keep them very well separated from customers. Verizon keeps their residential customer contact very focused on the public support channels.
It's possible some of the other users here may know details about your question, but I'm not one of them.
Good Luck.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

Mask email address of Sender, when using Batch Bursting option in HFR

Is there a way to mask the email address of the Sender when using Batch Bursting option in Hyperion Financial Reports?

Not quite what you asked but you can add an email group, for example [email protected] which shows up as the sender.

Removing DHCP Client identifier Option 61

Long story short after wasting a LOT of time i figured out that my ISP won't offer IP if there's Option 61 Client identifier included in my DHCP Discover. (i tried throwing my MAC in there but it didn't work) is there any way to remove it? Or filter it out?

Welcome to the forums. Just so you know, this is a peer-to-peer support forum. Verizon does not answer questions here.
Sometimes the Verizon moderators escalate issues to the support team, which is an extension of the Verizon folk you can reach by using the "contact us" link at the bottom of these pages. If that happens to your issue, be sure to follow the instructions the moderators post.
Unfortunately, I do not know of any methods to reach Verizon's network engineers. They keep them very well separated from customers. Verizon keeps their residential customer contact very focused on the public support channels.
It's possible some of the other users here may know details about your question, but I'm not one of them.
Good Luck.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

I cant transform my text to 3d text with my photoshop cc what can i do? all 3d options seem to be blocked

hello i cant transform my text to 3d text with my photoshop cc what can i do? all 3d options seem to be blocked

Also check your system's capabilities against the Adobe Photoshop requirements:
System requirements | Photoshop
-Noel

I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

P.S. Site is http://www.coldwatercreek.com

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT GIVE DETAILS

Hi,
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
Example of an automatic match
Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
Example of a manual match
An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
¡        the match indicator is not set and
¡        the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
In the context menu, two options are available:
                            a.      Merge All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
                            b.      Copy All Below
The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
The most important properties which are taken into account when versions are matched are now listed.
When referring to InfoObjects it is important to differentiate between:
§         Characteristics
§         Time characteristics
§         Key figures and
§         Units
Valid for All InfoObjects Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        Texts
·        Description
If texts/descriptions in the delivery version do not yet exist in the active version, they are transferred.
·        Attribute only (flag)
·        Short and long text (description)
·        Time dependency of attributes
·        Transfer routine
Valid for Characteristics
Properties Matched Automatically:
Properties Matched Manually:
·        Compounding
New InfoObjects are included in compounding
·        Referenced characteristic
Reference characteristics are transferred automatically. A warning is issued.
·        Attributes / navigation attributes
New attributes are included.
If an attribute is added by the customer, the settings for this attribute are transferred (for example, F4 sequence).
·        Application components
If the entry for the active version is initial, the delivery version is used.
·        BEx display
·        Characteristic constants
·        Default member
·        Authorizations (flag and field)
·        Selection (CHASEL)
·        InfoObject is document attribute
·        Data type
·        Length
·        Output length
·        Conversion routines
·        Lower case allowed (flag)
·        Contains master data (flag)
·        Master data is authorization relevant (flag)
·        Export DataSource (Flag)
·        F4 query design
·        F4 query runtime
·        Check ODS object
·        Contains text tables (flag)
·        Texts are language-dependent (flag)
·        Short, medium and long texts exist (each with flag)
·        Default currency
·        GIS attribute
·        Hierarchies exist (flag)
Valid for Key Figures
Properties Matched Automatically:
Properties Matched Manually:
·        Type of key figure
·        Fixed unit
·        Fixed currency
·        Aggregation
·        Exception aggregation
Valid for Units
Properties Matched Automatically:
Properties Matched Manually:
·        See the table above (Valid for Characteristics), if these properties are also relevant for the units.
When referring to InfoProviders it is important to differentiate between:
¡        MultiProviders
¡        InfoCubes
¡        ODS Objects and
¡        InfoObjects
InfoObjects are discussed above (see the first table Valid for All Objects Named Above).
Valid for All InfoProviders Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoObjects
If InfoObjects in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for MultiProviders
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoProviders
If InfoProviders in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for InfoCubes
Properties Matched Automatically:
Properties Matched Manually:
·        New dimensions
If dimensions in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
With the InfoObject catalog object type, InfoObjects that are assigned to a catalog in the delivery version are transferred to the active version automatically. Manual matching is not necessary.
With the transfer rule object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional attributes) are added automatically when the match is performed. Manual matching is not necessary.
With the process chain object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional objects in the process chain) are added automatically when the match is performed. Manual matching is not necessary.
·        Active Version Available
In this column, the following display options are available:
¡        : The object is available in an active version. You decide whether you want to retain this version or reinstall the latest version of the object.
¡        Date symbol: The object is already available in an active version. However, the active version belongs to an older Content release. SAP recommends that you install the latest version.
¡        Gray symbol: An activated version of the object is available in the system. However, the object status is inactive. If an object version is activated, this indicates that all metadata for the object can be created successfully. The inactive object status indicates that the processed object is inconsistent and cannot currently be used for processing data. Transfer the object again from the SAP delivery version (D version). If this is not enough to change the object status from inactive to active the object has to be postprocessed. You find notes on postprocessing in the activation log.
Postprocessing: An inactive object status may also occur for an InfoObject if changes are made to the structure at field level. Postprocessing the object involves converting the relevant tables in accordance with the activation log.
¡        No indicator: The object is not available in an active version.
7. Make Settings in the Selection List and Install.
Make the required settings in the Install selection list:
Installation Type
Installation Type
Information
Simulate installation
The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (and not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
Install
The selected objects are installed immediately.
Install in background
The selected objects are installed in the background.
Install and transport
The selected objects are installed immediately and then written to a transport request.
SAP recommends you use the Install in background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete. Make sure that when you install objects in the background that the versions are not matched. It is always the delivery versions that are installed. These are not matched with any available customer versions.
Refer
Business Content (Versions)
http://help.sap.com/saphelp_nw04/helpdata/en/c1/ea683cc5e8ca68e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Thanks,
JituK

What is the maximum dhcp reservations

What is the maximum dhcp reservations in apple airport extreme? Can it hold 20 records? More?
I am considering switching from my current router from another vendor because it can hold maximum 10 dhcp reservations.

Any follow up on this? My airport extreme seems to have a ceiling of 25 and I need ~35.

What is the use of Activate GuiXT option

What is the use of Activate GuiXT option .

GuiXT is a frontend design tool that allows you to taylor SAP standard transactions without modifying the backend ABAP code. It is a part of SAPgui and runs on the client PC, based on script files either on the PC or a network drive.
Functionality of guiXT from the SAP help;
"You can insert default values in fields
You can hide fields and groups of fields
You can move fields
You can add and change texts
You can add input help
You can add new screen elements like checkboxes, pushbuttons, graphics, or documentation
You can customize tables
You can change field labels on a system-wide basis"
Regards,
Nick

Firerfox has stopped opening new windows when I ask it to; why is this and what can be done to regain this option?

Firerfox has stopped opening new windows when I ask it to; why is this and what can be done to regain this option?
== This happened ==
Every time Firefox opened
== not sure - about 2 weeks ago maybe. I recently upgraded to vn 3.6.8

This is a workstation first off, right? 60 lbs or so?:
And you have 10.7.2, if not why not?
Quad core 2.8GHz? 3 x 2GB RAM or more?
Consider new Mac Pro comes with 1TB drive 50% is actually a lot. Most users off load non system stuff to one of the other 4 hard drive bays.
As for youtube I do read and saw threads when Lion came out. Lion does not support Rosetta aka PPC/PowerPC code of any kind, plug-ins, drivers and software all. Check into Lion Community?

What is sending company code in APP???

Hello
I am bit confused abt what is sending company code in APP. I have searched in google also but no answer is clear. It only says sending company code is ur known business partner but that does not clearify anything.
Can anyone explain with detail.........I will be greatful to you.

Hi,
Example 1:
Company code 0001 pays its own items and the items of company codes 0002 and 0003. All items are grouped into one payment.
Company code Paying company code Sending company code
0001 0001 0001
0002 0001 0001
0003 0001 0001
Example 2:
Company code 0001 pays its own items and the items of company codes 0002 and 0003. However, a separate payment is created for each company code.
Company code Paying company code Sending company code
0001 0001 0001
0002 0001 0002
0003 0001 0003
Hope this helps..
Br, Vivek

OSX sends out Dhcp requests thru the wrong interface

I have setup an Xserve so far only providing file services over AFP. It is located in our computer room on a different broadcast domain. I use a separate machine as a DNS. I would like to use my Xserve's 2nd ethernet interface to provide Netboot/Netinstall services on a 192.168.x.x network for bulk imaging of our clients. I have enabled Dhcp and setup Netboot on the eth1 but the system.log shows that it is floding my computer room network sending dhcp requests from eth0.
I have checked the bootpd.plist file and the settings seem ok.

Check your terminology.
it is floding my computer room network sending dhcp requests from eth0.
The only way it would send any DHCP traffic on en0 would be if en0 was configured to use DHCP for its own configuration.
Running as a DHCP server is entirely passive - nothing happens until the server receives a request from a client on the LAN. Only at that point does the DHCP server send any traffic out over the wire.
In addition, 'flood' is a relative term. How much traffic are we talking here? Are you talking a few packets such as in the normal DHCP client request/refresh cycle, or are you talking hundreds of packets a second?

Send to bluetooth right click option DOES NOT WORK

hi guys can you help me send to bluetooth right click option does not work!when i am going to send something it says windows cannot access the specified device,path or file you may not have the appropriate permissions to access the item please help me!i
have windows 8

this is how we send file using Bluetooth
http://superuser.com/questions/540498/open-bluetooth-file-transfer-wizard-in-windows-8
Did you pair this 2 device before?
May I know the destination device? its comes with WIFI?
tips: rather than Bluetooth, I suggest you using file sharing with WIFI, its more faster

HT5312 What if "Forgot your answers?" and option to use rescue email wasn't even present? Apple has made this process way too complicated!

What if "Forgot your answers?" and option to use rescue email wasn't even present? Apple has made this process way too complicated!

Welcome to the Apple Community.
Start here, and reset your password, you will receive an email with your new password, then go to manage your account > Password and Security and change your security questions.
If that doesn't help you might try contacting Apple through iTunes Store Support

What happened to the 'get all' podcast option?

what happened to the 'get all' podcast option?

It's disappeared!
I don't mean to be flippant, but I couldn't think of a more appropriate opening response.
I've had this happen to me in the past, and it has just re-occurred with the latest iTunes update. The solution is to download iTunes again (don't remove or delete your existing iTunes) and then start the installation procedure. One of the two options you see should be a Repair option. Use that and all will be well again.
Your post prompted me to repair my iTunes (for just that reason) and while it was running, I noticed a very brief message about "Get Podcast", in other words,it was the repair being applied. The procedure only took a few minutes and I didn't need to close other programmes or re-start my computer.
By the way, I like your user ID, are you intending that your first born becomes ;adxcjghvldxkjfghbv ll?
Message was edited by: the fiend

Send a Single Message to a Client

What is the best way to send a single message from the server to a client using flex/blazeds? The one caveat is that the message could take several minutes before it is sent. Think of a long calculation that is done on the server that the client waits for. I've thought of the following options:
1) Just use a RemoteObject and call a method. Would there be any problems with the response taking several minutes to come back? I would also ideally like to have a single thread which sends all the responses to the clients in a batch, rather than the standard route of each client's remote method call spawning a thread which returns the result; anyone know where to get started here?
2) Create a new destination and consume that destination on each client. The destination and consumer could be closed on each client after the first message is received.
Which is the best option?
Thanks,
Gordon

It looks like you need a mechanism where the client registers with the server, then server does some long calculation, and then when the result is available, server sends the result back to the client. Messaging (option #2) sounds like a good fit for this.
Some thing to note:
- You can use subtopics so each client is subscribed to the same destination but has its own subtopic to receive updates from.
- You need to use a realtime channel (polling, long-polling, or streaming) so that the consumer can receive updates. I suggest long-polling with a really long wait time.

What to send in DHCP's Discover Option 61 Client identifier?

Similar Messages

Maybe you are looking for