What to set when capturing to an external firewire drive?

When capturing to an external firewire drive that will also be used to edit the video, what do I need to set in the Scratch Disk window? Just the scratch disk? Do I need to also set the waveform cache? thumbnail cache? autosave vault?
Thanks.

Depends on your overall configuration/workflow...but I'll usually set my external for Video Capture/Video Render/Audio Render. Then both cache files to my system drive and my Autosave Vault to the external...unless I have an additional internal or second external. I keep my Project files on the system/startup drive.
When you click on the 'Set' button, it's best to simply select the root of whatever drive you want to use. This alleviates the possibility of uncontrolled heirarchy of 'scratch folders' cluttering up your system. If you select the root, then FCP creates a "Capture Scratch" folder at the root level, and each new project gets it's own folder within the main "Capture Scratch" folder.
Setting your autosave vault somewhere other than where your project file is located, can save your butt, if your system drive (or wherever your project file is located) decides to crash.
Others may do it differently, as I do on occasion...just depends on what drives/Mac I have available at the time.
Hope that helps.
K

Similar Messages

HV20 Capture to External Firewire Drive

I'm here again, trying to help a friend who live in another country.
She says, "It seems that I can't capture footage from my camera (HV20) directly on to the external hard drive as my camera doesn't allow another firewire or
USB to be connected to the computer at the same time."
Any reason she would think this?
I know she's using a pre-unibody MacBook Pro with Final Cut Express. I don't know the details of the specs on hers (I will be asking her about that).
But shouldn't she be able to capture to an external Firewire drive? I'm thinking that when she plugs in the camera, the drive is no longer recognized. I'm in the process of getting more details from her.
Any help is very appreciated.

Of course she should be able to do it.
It should have 2 FW sockets, so she could use one for the camera and one for the FW HD.
Even if it had only one, she could daisy-chain computer, FW HD and camera.
A third possibility is to capture direct to the MBP's HD and then copy the media across to the FW HD. The media from a one hour tape can be copied in less than 10 minutes so it is no big problem.
P.S. I have a Canon HV20 and it never complains when I have 2 FW HDs and a USB 2.0 connected to my iMac!
Message was edited by: Ian R. Brown

HT201250 What does it mean to "partition" an external hard drive? Is it something that I want to do?

What does it mean to "partition" the external hard drive? Is it something I want to do? How do I save files from another hard drive to the new one? I have to reformat the old one as it was not set up correctly. The drive I have is Seagate but not specifically for MAC, so I have to format it.. never have done this before. Don't know the jargon. I read that Time Machine will back up automatically but I want to take files from the old drive to the new one. Do I have to take them to the computer first and then to the new drive? I need more memory on my computer. It's way too cluttered and congested. HELP!

Whoa! Slow donw. TRhere's a lot here. I would suggest you buy a good book on computers in general or macs in particular, one is "OSX the missing manual".
What does it mean to "partition" the external hard drive?
It means you take one large drive and make it into more than one volume. This means that it might show up as 2,3 or 4 inde[pendenmt drives. Each one could have, for example, a different operating system on it. Its a good thing to do if you want to use a drive for several purposes
Is it something I want to do?
beats me, you didnt way what you're trying to accomplish. Sorta like sking "should i turn left?" Depends on where you want to go.
How do I save files from another hard drive to the new one?
See advice n book above. Copy them in finder. Copy them in unix. Use a backup or sync utility. No different from Windows in that respect.
I have to reformat the old one as it was not set up correctly. The drive I have is Seagate but not specifically for MAC, so I have to format it.. never have done this before. Don't know the jargon.
Hook it up. Run disk utility. Partition 1 or more partions. GUID map. Format each partition Mac OS extended, Journaled. for more, read book, above. Seriously - we could give you more tips, but you really should learn enough to be comnfident.
I read that Time Machine will back up automatically but I want to take files from the old drive to the new one. Do I have to take them to the computer first and then to the new drive?
I have no idea what you are asking.
I need more memory on my computer. It's way too cluttered and congested. HELP!
What kind of memory and why? RTAM? Hard drive space? Explain. By the time you are done explaining, i suspect you will have ansered your own question.
Good luck,
Have you read the PDF manual for your cmputer?
Have you used a search engine to look for info, for example, in two seconds i got this from google and wikipedia:
http://en.wikipedia.org/wiki/Disk_partitioning
Grant

Blue screen of death when La Cie external firewire drive connected

I tested a LaCie external firewire drive on my iMac and it worked fine. I packed it up well and posted it to a friend who gets the blue screen of death when the LaCie is connected to her iMac. She's not even trying to boot from it.
My iMac is 9.1 and hers is 8.1. We are both running Snow Leopard. Was there some problem once upon a time with chipsets or am I mis-remembering?
TIA

Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help

Blue Screen Result When Installing To External Firewire Drive

I can't afford to have problems with programs not running on Leopard on my 17" G4 1.67 GHz 2 GB RAM PowerBook so I am trying to install it on an external Firewire drive. I was hoping to test out Leopard with certain applications by running it from the external drive.
The Firewire drive has two partitions, one has my backup clone of the PowerBook and the other just has files and about 35 GB of free space. The installation would be a new installation so none of the files that deal with login or Application Enhancer that are being talked about in other threads are an issue.
My first attempt to install brought up a blue screen after the installation restart. I left it there for about 30 minutes then powered off the PowerBook by holding down the power button. I started it again and held down the option key, picked the install disk as startup, went through the disk utility repair disk (found no problems). After that I picked the new install on the external from the startup preferences and it simply restarted to a blue screen. I left that one for about 20 minutes then powered down.
I went back to the Powerbook Tiger OS system, deleted all the installed folders on the external and tried a completely new install. Once again it went to the blue screen after the Leopard install restart. This time I left it overnight and this morning the display was dark and upon waking it up with a tap of the space bar was greeted by the bluescreen again.
I talked to my Apple hardware rep who knows the equipment that I am working with and we talked about all the steps I went through and he has no explanation why it won't work on the external.
I would love to hear from anyone that may have insight for this particular external FW drive installation perspective.

Joe-
Is the drive partitioned to APM? (Sorry I took Anton's reply to be yours.) What was the type fo partitioning onthe disk with the success? I am not knowledgable enough in those error messages on the system.log file, but one thought is - after the memory upgrade, did you clear the PRAM (long shot, but do it anyway)? The machine booting on one external Firewire drive (#2) implies the problem is with the external FW disk (#1) you are using. Some other people had the bus error, but with Time Machine. (Not to go on a tangent, but TM seems to have problems when the disk name has non-alphanumeric in it.)
Hoping someone who knows the syslog errors and the boot sequence will pipe in here.

Project will not open when saved to an external hard-drive

Hi,
Well, as the title says, I cannot reopen a project when saved to an external hard-drive, it will however do so when I save to a local drive... Not good if you wanna work around several workstations, any ideas as to why?
Thanks,
Phil.

Are you using Final Cut Pro?
You should be asking on that forum. It would be beneficial if you provided some concrete information, what computer, what drives, how are they formatted, how are they connected, what exactly happens when you try to open it?

Files corrupted when written to external Firewire drive

I recently discovered that files transferred from my internal ATA drives to my external Firewire drives have been getting corrupted.
The corruption is most noticable in Quicktime movies where I can see individual video frames with pixelated blocks of color and short noise bursts in the audio. My concern, however, is that it is happening to any file type and the corruption may not be noticed until it is too late.
I read a few posts from the end of last year that stated the Firewire ports of the B & W G3s have problems. The general solution appeared to be the use a dedicated PCI card.
Here are my questions:
(1) Is there a formal aritcle discussing this problem? (I didn't find one)
(2) Copying files is a VERY basic function of an operating system. Shouldn't there be some kind of error generated if a copied file doesn't match the source? (like a checksum error).
(3) If a PCI Firewire card is the answer, is there anything to watch out for when selecting one?
(4) I'd like a better way to compare souce and destination files after a copy. What application can I use to do a low-level comparison of two files?
Thanks,
John

John,
My reference to RAM was by way of example. Another example of error opportunities is in rebuilding the desktop. I have had files lost because of the desktop changing when the removable media or external hard drive is changed to a computer with a different OS. Rebuilding the desktop restored the files.
The guys that wrote Disk Warrior could give the brutal full on why files appear, disappear and get corrupted. I choose to not trust any one medium so I backup my backups. Sometimes a reliable routine is better than an explaination.
No one has responded to my inquiry about why jpeg files are corrupted when copied from the B&W to a PC zip disk but not to an external HDD. I should try that with a PC formatted HDD. The odd thing is that quicktime will read the corrupted file but jpegview will not. Or the otherway around. I have forgotten the details because I gave up on trying to get an answer.
I would be interested in reading more about file transfers during the process of burning a CD and how buffer underun technology works. As you said, the answer may be so detailed that the explanation wouldnot be understandable without becoming a text book!
Jim

What format i should use for my external hard drive that can be used interchangeably between mac and pc?

What format i should use for my external hard drive that can be used interchangeably between mac and pc?

Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
One option is MacDrive for you PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/
More options...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive.

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
Thanks!

I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

I have upgraded to Maverick when i connect an external hard drive my security does not scan it now

I have upgraded to Maverick. With snow leopard when I connected an external hard drive, the Norton security would scan this drive. Since I have had Maverick this does not happen, I have updated my security.

How is the WD drive formatted and have you tried resetting the SMC?

Why does my macbook pro crash when I connect my external hard drive?

When I connect my external hard drive to my macbook pro (with fire wire) it crashes my computer... Any thoughts or help??

Thanks for the response. I tried both methods with the same end result.
I'm in safe mode now. It doesnt show up as being plugged in. It worked fine when connected with the USB-I went to disk utilities and repaired the disk.
I tried to plug in with the firewire, again and it shut down my computer..
Any other suggestions?

When I connect an external hard drive to macbook pro it is very slow to appear on the desktop and Finder window, sometimes 20 mins or more, even with auto backup switched off . any clues?

when I connect an external hard drive to macbook pro it is very slow to appear on the desktop and Finder window, sometimes 20 mins or more, even with auto backup switched off . any clues?

Hi robfromkinglake west,
Try and isolate the issue. Check if it's only with this drive.
Check the drive with Disk Utility
Using Disk Utility to verify or repair disks
http://support.apple.com/kb/ht1782
I've never seen a drive take 20 minutes to mount.
Nubz

Why does my computer slow down when I connect an external hard drive

I've been using a 2TB western digital external hard drive with USB connection. It was working fine, but once it was up to 1.95TB, my macbook pro froze up. Looking at my activity monitor, my memory dropped to nil once the hard drive was connected. The same hard drive works fine on my PC and I have no issues accessing all the files, just not on my mac. Any suggestions?

Thanks Eustace,
When I disconnect the external hard drive, and look at the activity monitor, the memory climbs back up to about 4 to 6GB free.
I have software system version: OS X 10.8.3 (12D78)

I just added two external firewire drives and they keep going to sleep. I did not have this problem when USB. I have turned off "put disks to sleep" in power preference.

I just added two external firewire drives and they keep going to sleep. I did not have this problem when using USB external drives. I have turned off "put disks to sleep" in power preference.

It is not clear if these are the same drives, just connected
differently, or different drives?
One thing that may be happening is that the drives firmware
itself is putting it to sleep when inactive. Many drives on
the market have ths feature and it is turned on by default
and require a drive utility from the manufacturer to disable it.

Audio cutting out when using D2 external Firewire Drive

Hi,
I have just upgraded to Logic Studio, using the following setup:
Macbook Pro
Motu 828
AMT 8
Logic Studio
D2 Lacie 500GB Firewire Drive
As the MacBook's internal hard drive is not sufficient to record and playpack efficiently, I was advised to get an external Firewire Drive. Given that I have very little space on my laptop - (am running windows on a partition also) I am trying to save my logic files to the external HD. When creating tracks specifically using Audio Instruments, the playpack keeps cutting out.
I am connecting the HD via usb 2. I am also having to freeze the tracks in order to record more layers. There is lots of clipping and latency. I thought by using the external, this problem would be resolved.
The HD is not playing back the tracks fast enough, and keeps cutting the audio out. The audio cuts out everytime the blue light on the drive flashes.
I cannot save the files to the MackBook HD as there is notenough space.
Is there something very wrong with my setup?
any advice would be really appreciated.
ps. I am a bit of a newbie
thank you in advance.
Spy

Connect it via firewire 800. USB2 is not good for audio or video streaming.
I have 3 D2's connected to my mac pro, works like a charm.
good luck.

What to set when capturing to an external firewire drive?

Similar Messages

Maybe you are looking for