What to transport and not to transport

Hi,
What are other things that are required to be transported from the ECC side for the LO extraction procedure?
The only thing I could think of are the datasources to be imported to a test system and then production system. All other settings are system dependent and are required to be done on each system and are not required to be transported. Is this a correct statement?
Thanks

Hi
You need to transport your data soources from RSA6, from LBWE the comm structure will also be in transport. when ever you deal with LO **** pit these are important. If you have enhanced the extractor then you need to collect the Extract structure, Include and the above mentioned. They are NOT system dependent. You should transport.
Assign points if helpful
kalyan

Similar Messages

  • What is "flashruntime (and not "flash runtime") ? is it a virus ?

    what is flashruntime (and not flash runtime) ? is it a virus ?

    Every time I light(switch on) the computer, or my browser, a windows 
    appears (in french because i am in france) in screen who asks me :  
    translation of this window :
    " Want to  adduce the program following to bring modifications to this 
    computer?
    Name of the program: Adobe Flashruntime  
    Editor : Adobe Systems Incorporated 
    Origin  of the file : telechargement  internet
    Location of the program : htpp: //  fpdownload2.macrom..."
    ( Screen  shot in French as attachment)
    Is it a virus? Because the real name of the program of Adobe is:  flash run
    time and not flash runtime 
    thank  you for our help
    [email protected]

  • What to do and not do with a new ENVY 17 3D

    My ENVY 17 3D (LY336AV) is supposed to be here next Tuesday (4/10/12).  I've seen a lot of posts on these boards on driver issues.
    Here's my question:  In setting up this computer, what should I do and not do?
    This is my first HP after about a dozen Dell laptops.  Typically I run Windows Update first to get the latest OS components, which sometimes includes drivers for hardware.  Should I do so?
    I plan to do some light gaming on the machine.  Should I install the latest Catalyst drivers?
    What about changing the BIOS to make swapping from the Intel to ATI graphics card manual vs. automatic?
    Any other suggestions?
    Thanks!

    I wish you luck.
    I shipped back my Envy 17 the day I got it.
    First - it wouldn't power on.  I jiggled the battery and finally got it to work.
    Second - one of the fans started squealing.
    Third - the fan died.
    Fourth - Even thought I paid for "in home" service, HP said I had to ship it back to them for repair.
    Instead, I returned it and bought a Dell.  I've owned 10 Dells and never had that kind of trouble.

  • Flash drive no longer works with MacBook Pro. Now says it is unformatted, but no info what to do and not lose my data. Does not show up despite multiple prior uses on the same computer.

    Upgraded to OS Mavericks in November. Flash drive that worked fine previously with Lion and worked several times with Mavericks. Now says the 8GB jump drive (Lexar) is unformatted. Disk Utility First Aid seem unavailable. It sees the drive, but on the far left left, and when highlighted, nothing can be done with it.
    How do I recover my information or reformat it without losing my data?

    I am MikeMacBP2013. Cannot figure how to reply to Kappy's comment. Kappy, your comment did not really help me. My concern is how to save my data, not wipe and use a $10 USB drive.
    In the past two hours, I wasted most of it trying to use a software program, Disk Drill by Cleverfiles, that offers a "free" version. The free version does not recover your data for you. It is not a free 30 day trial. It is deceptively advetised - it will recover data but you will not see your data untless you pay them almost $100.
    Instead of trying to recover the data on the USB drive, this program ran a recovery on my computer hard drive and any disk image it could find on my computer until I stopped and deleted it. Apparently, it collects and keeps data recovered locked unless you pay for a key to download your data. This is not clearly presented up front. Had I known, I would never have put their software on my computer.
    I need direction to a reliable recovery program that is not this sneaky and deceptive. I stopped it when I discovered it was not doing what I had clicked for it to do, and removed the software.
    I am looking for a recommendation for a program that will do what Apple Disk Utility does not do - restore the formatting that may have been corrupted, or at least recover my data files so I can put them on other portable media.
    I recently installed a CalDigit Thunderbolt Dock to get USB 3.0 on my early 2011 Mac. I suspect this may have contributed to this disk failure but will have to contact their tech support tomorrow.
    Thanks for any suggestions for a reliable free or reasonably priced recovery software that someone can attest from using really works.

  • How to use transport and can u transport par files?(like runtime.logon.par)

    Hi team,
    I'm new to Portal and i need to move everything i made from DEV to PROD.
    Can you please help me out where i have to start?
    If i look at the transport (exporting) i see that i can only add iviews and pages, but i can't find my uploaded par file (com.sap.runtime.logon.par) within the content folder as it is in u2013 Support u2013 Portal runtime u2013 browse deployment -> com.sap.portal.runtime.logon.par.bak.
    Regards!
    Michael

    Hi!
    Oh yeh, its that simple :o thought i had to do this through transports but...
    I think i was just stressing out at that time
    A big thx,
    Michael

  • Merging Java Transport request with Abap Transport Request in Charm

    Hello All,
    We have activated the Change request Management in Solution Manager. Therefore transport request of type workbench and customising can be created when you choose action 'Create Transport Request'.
    However we have some SAP systems that have CTS+ integrated which allows to generate transport request number and attach objects in PI Integration Directory  - java transports.
    Question is - Is there a way we can integrate the java transports generated in these SAP systems  with Solution Manager  CHarm and transport creation.
    Or can we assign the java transports to charm in any way. 
    We are basically looking for how  when users create Charm, the abap and java transports relating to the charm are generated and created only from  Solution Manager manager or how these two transports can be linked together in Solution Manager.
    Thanking you in advance for your help.
    Tolly

    Hello Friends
    I have read the links and followed the instructions and tried to create object
    TABLENAME   R3TR  TABU and tried to save it.
    I keep getting a warning message 
    Note: ZTABLE1 is an application table
    Object TABU ZTABLE1 has object function "k", but no key.
    (I don't know what key to enter. I tried the Key field name, but it said 'Enter Numeric values only').
    If I ignore and save and try to create transport request and then import it on a different server, again only table structure is getting transported and not the contents/data of the table.
    I would appreciate if some one can please let me konw what I am doing wrong.
    Thanks
    Ram
    Edited by: Ram Prasad on Jun 2, 2009 3:38 PM
    Edited by: Ram Prasad on Jun 2, 2009 3:40 PM

  • I went on iTunes today and the app store on my iPhone 5 and both were in the UK location. How do I change my locatin back to america so I can see all the american trends and not the UK/London ones?

    I went on iTunes and the App store today and both of them have somehow changed to be in UK form. The money symbol is different and it shows me whats trending there and not in america, where I live. How can I change the location back to it's original form so I can see whats trending in america and everything else. Please help.

    Try going to the bottom of the Featured tab in the App Store app on your phone and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select the US.

  • Enhancements is not active and cannot be transported

    Hi All,
    We are getting following error message when releasing a Transport request in CRM system which is on 7.0 version on MaxDB.
    "Enhancements is not active and cannot be transported".
    The strange thing is that the Tasks underneath are all released successfully , but only the TR is not getting released.
    Also, the logs in transports do not point to which enhancement is not active as well.
    Any help in this issue is highly appreciated.
    Regards,
    Murali Narayanan

    Hi Murali,
    Go to the enhancement and check the tables.fields,includes and it request nos.Go to that transport request ,double click on that see what and all there under it. Post if need help.
    Regards,
    Madhu.

  • Contents of new costing variant, valuation variant and costing sheet not getting transported

    In our development client,I have created a new costing variant, a new valuation variant and a new costing sheet in separate transports.
    When I release the transports to move into the Test client, the contents of the configuration are not getting transported at all.
    I tried to do them again manually using  Table view - Transport , but again, if I view the transports in SE10,they don't show the table contents, etc.
    Any help on this will be highly appreciated.

    Ajay,
    Let me make sure I understand.
    Create a new TR using SE01
    Go to transaction OKKN (costing variant)
    Select the costing variant and then choose Table view - transport
    Provide the transport number
    At what point to I say 'include in request'
    If I try to use the menu option Edit-Transport-Include in request in the beginning itself, the 'Include in request' is greyed out.
    This is where I'm stuck

  • What is the difference between Bex transportation and Normal Transportation

    Hi experts,
    I have doubt with Transporting queries , in this I've used the normal transport (truck icon) rather than Bex Transport. I would like to know which is the preferable one and what is the main difference between them.
    Suggest me if I can go for normal Transportation rather than Ibex transport, as I've  not tried Bex transportation before.
    Give me some valuable inputs please.......
    Regards
    Kumar

    Hi Kumar,
    We have a Bex transport because we may make changes in the query very often and these changes will be automatically taken care by Bex transports.
    Generally this is how it goes.
    You will capture the queries by creating a transport request and immediately you will create a Bex transport request and  you have to assign the previously created transport request number to this Bex transport request, so that everytime you make changes to the query will be taken care by the Bex transport.
    You can even create a Bex transport request individually.
    Hope this tip may be useful.
    Assign points if you find useful
    Thanks
    Regards
    Sam Mathew

  • How to use the Variants in SAP Transportation and what is its use ?

    Hi experts,
    How to use the Variants in SAP Transportation and what is its use & How to create a variant in SAP ?
    Can anybody answer this ?
    Regards,
    Shakti

    Hi,
    If you are asking about "slection vairants" in SPRO settings of "shipment cost document" then
    When it is activated,
    each user can have his own slecetion  and list criteria for
    1. List shippment costs:calculation
    2. List shippment costs: settlement
    This can be directly saved from VI01 screen by the user.
    from environment> lists
    This is user specific only.
    Hope this helps.
    Regards,
    Sharan

  • Change and transport system not configured

    hi
    Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
    How to fix this?
    i appreciate your help in advance. Thanks
    Madhu

    Hi
    After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
    STMS is mainlly used for moving objects from one system to other system
    Regards
    kiran kumar.v

  • What is a transport and how to configure it?

    Hello,
    I am using NW 04 Patch 11.
    When users go to home->work there is a calander there.
    The calander is not active and there is a message there:
    "No transport has been configured for the calendar".
    Can someone please explain me how do I get this calander to work, how do I configure a transport and is it possible to connect this calander to the user's exchange calander?
    Roy

    Hi Roy,
    @Lars: sorry, but this has nothing to do with Portal Transport Management, it's about transporting data from
    the Exchange server to the portal.
    @Roy: yes, it should be possible to connect this to the users Exchange calendar. This calendar is part of the
    Microsoft Exchange Connectivity Architecture. You can find a detailed explanation in the NetWeaver
    documentation under the topic Collaboration --> Groupware ...
    http://help.sap.com/saphelp_nw04/helpdata/en/4b/be49e7e0b0eb449fdebc79d018f896/frameset.htm
    Best regards,
    Kilian

  • Transport moved to QAS and not to PRD

    Hi,
    I wanted to view the list of transports, which have been moved to QAS and not to Production.
    Please let me know of how i can obtain this information. , like which table contains this information etc

    Hi Balaji,
    There is no direct way using STMS to get this info. You can download the import history of QAS and PRD separately and do a vlookup using excel.
    Thanks.
    Siddhartha.

  • How to Copy Roadmap using RMDEF, and NOT generate a transport

    We want to lock down our production environment from any configuration, but still be able to maintain our Roadmap, via RMDEF/RMAUTH, without generating any transports. Is this possible? Or must I always generate and push the transports from our development/configuration client to production?

    You need to read the error messages more closely:
    01652, 00000, "unable to extend temp segment by %s in tablespace %s"
    // *Cause:  Failed to allocate an extent for temp segment in tablespace.
    // *Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more
    //         files to the tablespace indicated.
    01653, 00000, "unable to extend table %s.%s by %s in tablespace %s"
    // *Cause:  Failed to allocate an extent for table segment in tablespace.
    // *Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more
    //         files to the tablespace indicated.When you do CREATE TABLE t AS SELECT ... Oracle initially creates the table as a temporary segment in the tablespace where the table will reside.
    The ORA-01652 indicates that there is not enough space in the table's tablespace (the table you are trying to create) to grow the table to the size required. It has nothing to do with your temporary tablespace.
    The ORA-01653 means that there is not enough space in the tablespace for an existing table to add another extent.
    In both cases, you need to add more space (either by adding new datafiles, or by extending the existing datafiles) to the table's tablespace (again, not the temp tablespace).
    Just a question. If updating the tables once a month takes too long, why not increase the frequency of updating the tables? If you are on 9i, you may also want to take a look at the mege command.
    TTFN
    John

Maybe you are looking for

  • Retrieve a number from a stored procedure

    I need to retrieve the number of rows returned from a query in a stored procedure. This is what I currently have: PACKAGE PART_DATA AS FUNCTION GetPartDataRowCount(Company IN PART_DATA.PART1_CO_SITE%TYPE) RETURN NUMBER; END; PACKAGE BODY PART_DATA AS

  • IDOC to MDM scenario error

    my scenario is IDOC to MDM.For that i m using MDM adapter. I m getting erroer in Communication channel monitoring : "Configuration Error: cannot create repository session:Caused by: The specific MDM repository was not found on the server." Kindly sen

  • Default different blanket release buyer via PR interface

    Hi, My scenario: blanket agreement set buyer A, and all the sourcing funtion have been set (ASL, assignment set, sourcing rule..), I want to customize a program to insert PR interface, then create new blanket release automatically, but the new blanke

  • Wacom pen pressure sensitivity always turns off in Photoshop

    I got this issue since I got my new windows system.  I do my daily Photoshop session with my Wacom Intuos 4, then randomly later, sensitivity of the pen turns off. The only way to recover the problem is to reboot Photoshop and sometime the whole syst

  • !please help me to write method in my program!

    I have written this program however � have to add something but I could not do it. I have to use four method for each selection. For chasis type four different type which are hatchback, sedan etc. this should be single selection. Moreover option part