What to use for online backups.

I currently run weekly backups with option 21 (Save all).
Which brings all the subsystems and Sap down.
What's the best way to run online weekly backups without bringing SAP down and ending al the subsystems.
THanks
Joe

Hi Joe,
I allways do a save-while active in my own CL save programs, and only very rare it does not find a sync point.
Here is my save code:
             SAVLIB LIB(R3PRDDATA)      +
                    DEV(TAP01)          +
                    VOL(*MOUNTED)       +
                    SEQNBR(*END)        +
                    ENDOPT(*LEAVE)      +
                    CLEAR(*ALL)         +
                    SAVACT(*SYNCLIB)    +
                    SAVACTWAIT(900)     +
                    ACCPTH(*YES)        +
                    DTACPR(*YES)        +
                    OUTPUT(*PRINT)
Guarantee to work without expensive BRMS
Good luck
Paul Hoogendoorn

Similar Messages

What commands used for taking backup of oracle database using BR*Tools

Can somebody please help me urgently to know what are the commands used for taking backup of oracle database using BR TOOLS.Also specifythe commands in detail which can be used for taking backups of oracle database ,Online Redo log files in databse using BRBACK tool,Archiving of offline, redo log files using BRARCHIVE, and Restoring a Database using BRRESTORE tool Commands(Plese specify the commands with their Syntax used).Also specify the commands with their Syntax which are used for taking backup of oracle database(online,Offline redo log files) into Tapedrives using BRTOOLS commands.
Thanking You for helping (in advance).

Dear Ashish,
BRBACKUP / BRARCHIVE calls the operating system command to copy the files.
Simple approach to get the commands is as follows.
1. Set the BR_TRACE (as given in the SAP note 29321) and run the command for which you need to know the OS / SQL commands.
2. This will generate the log file with the trace information. This trace has the information of the commands used by the job you have run.
Hope this helps.
Regards,
Madhukar

What is the best online backup system to use for Mac?

What is the best online backup system to use for mac?

By online, do you mean backup to the cloud, where you pay a monthly fee for the service to host your data?
If this is the case, then there are a lot of services (do not know them all, but DropBox, CrashPlan, Carbonite, Mozy, SugarSync, come to mine, and that is not a complete list.
There are also services that allow you to backup over your home network or across the internet to your own storage. CrashPlan has this option (for free), and Transporter come to mind. CrashPlan talks to another computer also running CrashPlan that you own or have some control (could even be a friend or relatives computer). Transporter is hardware that you either provide some storage of your choice, or they will sell the unit with storage.
I'm mostly a CrashPlan to my own storage user. I backup to a Mac mini for my Mom (300 miles away) and Wife (she is local )
Can clarify your exact desires or needs.

Mountain Lion refuses to install on Hard disk because it is used for Time Backups. I have mounted a different disk for tame backups and still, I cannot install the OSX. What do I do?

I donwloaded the Mountain Lion OSX and it would not install because it said that the hard disk is used for Time Backups. I then mounted a separate Hard Disk and started running the time backups on it.
Still, the Mountain Lion would not install on the main hard disk.
How do I convince it that the haerd disk is no longer used for time backups?

Read through this: https://discussions.apple.com/docs/DOC-4055

Getting error while running script for online backup

Hi,
I am running a script for online backup but ended up with an the below error.
*ERROR* [Backup Worker Thread] com.day.crx.core.backup.Backup Failed to create temporary directory
Please help out in resolving this.
Thanks in Advnace.
Maheswar

Hi mahesh,
If you are using backup feature from crx console, I mean http://localhost:4502/crx/config/backup.jsp I can say that we had also some problems with this functionalities.
First off all what you need to check are the permissions, because when you check a source code there is line which creates a File object using a path specified by you to make a backup of repository.
File targetDir = new File(req.getParameter("targetDir", listDir.getParentFile().getAbsolutePath()));
You need to have sure that the proper read write access has been granted for this path.
Another issue is that maybe there was already prepared some hotfix if you are using CQ5.4. Please refer to the following link:
http://dev.day.com/content/kb/home/Crx/CrxSystemAdministration/CRXOnlineBackup.html
and also to this one:
http://dev.day.com/content/docs/en/crx/current/release_notes/overview.html which contains a hotfix number #34797 which was applied to backup.jsp file.
Regards,
kasq

What is used for WebDynpro for ABAP?

hi all friends,,
what is used for WebDynpro for ABAP?
Thanks,
S.Suresh.
Title was edited by:
        Alvaro Tejada Galindo

Hi
Web Dynpro for ABAP - Getting Started
Web Dynpro for ABAP is SAPs new standard UI technology for developing user interfaces in the ABAP environment. In the long term Web Dynpro for ABAP will be the successor of the traditional screen (Dynpro) based user interface technology which is based on the SAP GUI. Available with NetWeaver 7.0 (2004s) Web Dynpro for ABAP provides the same declarative UI development paradigm as Web Dynpro for Java directly out of the NetWeaver ABAP Application Server. Web Dynpro for ABAP allows the development of user interfaces directly within the ABAP Workbench (SE80) and the Web Dynpro runtime environment is a central part of the ABAP server and can be used in any SAP solution based on NetWeaver 7.0 (2004s) without the need of an additional server installation.
Web Dynpro for ABAP allows the development of user interfaces in a declarative way by providing a mighty framework which abstracts the rendering technology from the core UI definition tasks. The Web Dynpro developer declares the layout and behavior of the UI without caring about HTML, JavaScript, browser specifics or the HTTP protocol. Instead the focus lies on designing graphically Web Dynpro components based on the Model View Controller model, which enforces a clear separation between the UI layer and the underlying business logic.
This declarative Web Dynpro programming model enforces the developer to focus on the tasks of
Designing the layout of the visible views (where should the table be placed, do I need tabs, how should the button look?)
Declaring the flow and behavior of the application (flow between views, which event is triggered by which button click, etc)
Defining the data binding (which internal table is displayed in a specific table, etc)
Implementing the event handlers and controller methods.
Without making any assumption about the used rendering technology, like which browser should be supported or if the Web Dynpro application will be later displayed in a web browser via HTML at all or in another kind of client with completely different rendering capabilities.
The Web Dynpro Frameworks provides all important UI features directly out of the box:
All elements (tables, buttons, trees, dropdown list boxes, etc) necessary for state of the art user interfaces are provided by the Web Dynpro Framework in the form of predefined UI element libraries.
Complex features and behavior of UI elements.
Internationalization of the UI. All visible strings in a Web Dynpro ABAP UI are handled by the translation system and are translated in the same translation environment like other ABAP language dependent resources. All texts are displayed automatically at runtime, dependent of the users credentials.
Accessibility features are directly built into the framework and UI elements.
A unified rendering engine generates at runtime the data which is sent to the specific client application, which is not limited to browsers but includes the NetWeaver Business Client.
All this is available in the established environment of the ABAP application server and well known capabilities like the transportation and change management system, security environment, test and performance analysis tools or remote debugging can be used like in common ABAP development.
Learn about the Web Dynpro for ABAP technology with the resources below, and post your related questions and answers to the Web Dynpro forum.
Web Dynpro for ABAP: Sneak Preview
Download, License Key Documentation, and Installation Guide available here.
Web Dynpro for ABAP: Tutorials for Beginners
SAP NetWeaver Product Management provides this set of tutorials for getting started with Web Dynpro for ABAP technology.
SAP Help Portal: Web Dynpro for ABAP
This online SAP documentation goes into detail about Web Dynpro architecture and programming, Web Dynpro for ABAP administration and security, and more.
Web Dynpro - Not Just for Java Developers Anymore   (PDF 3.8 MB)
In this SAP Insider article, SAP Product Manager Karl Kessler describes the tools of Web Dynpro for ABAP and uses a simple flight report example to highlight new and updated tools in the familiar ABAP environment.
Community Contribution: WDA Tutorial I - Getting Started with Web Dynpro for ABAP   (PDF 2.5 MB)
Software Engineer Rich Heilman provides this step-by-step guide for developing a Web Dynpro for ABAP application.
Going into Details
Basic Concepts - Selection vs. LeadSelection
In this blog, Thomas Szuecs of the Web Dynpro for ABAP development team shows how selection and LeadSelection works in Web Dynpro for ABAP.
Web Dynpro for ABAP: Recreate the SE16 Data Browser   (PDF 386 KB)
In this tutorial, Thomas Jung of SAP NetWeaver Product Management shows how to create a data browser simulator using Web Dynpro for ABAP.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/80aef577-543f-2a10-d19c-d83a565efe37 [original link is broken]
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

Ebs r12 cloning using rman online backup

dear all,
how are you guys? i have ebs r12 on multi node and i want to clone db tier and apps tier using rman online backup,can anybody provide me the detail steps of cloning ebs(db tier and appstier ) using rman online backup and directory structure on source and target database is also different.your help highly appreciated thanks in advance.
regards.

Hi,
You cannot use RMAN to clone the Apps tier of the EBS and you may use RMAN only on the DB tier. For a complete backup, as mentioned by Hemant K Chitale, you will have to use the rapid clone utility.
To perform a rapid clone using RMAN there are plenty of step by step instructions in google which may guide in addition to support.oracle.com, Let me google that for you
Thanks &
Best Regards,

Receiver determination in BPM ..what is used for?

Hi everyone.
I've never used 'receiver determination' step in a BPM. I want to know what is used for.
Regards,
Inigo.

you can ref: this link to find example where a receiver determination step is used in BPM- http://help.sap.com/saphelp_nw04/helpdata/en/43/6211b11c895f6ce10000000a1553f6/content.htm
More abt RD step in BPM - http://help.sap.com/saphelp_nw04/helpdata/en/14/d5283fd0ca8443e10000000a114084/content.htm

What does GPRS mean? what is it? what is used for?

I have a nokia device that says it supports GPRS as a conectivity option, so......what is GPRS? what is used for?
Could anyone explain please, explain it to me?
Thanks.

http://en.wikipedia.org/wiki/General_Packet_Radio_Service
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

I am running a MacBook Pro with 10.7.5 and I downloaded the OS X 10.10.2 Update Combo, however when I try and open the package the error message "This volume is used for TimeMachine-backups". Which is not true. I´m using TimeCapsule.

I am running a MacBook Pro with 10.7.5 and I downloaded the OS X 10.10.2 Update Combo.
When I try and open the package after accepting the lincence-agreement and upon choosing the install-volume the error message appears: "This volume is used for TimeMachine-backups".
Which is not true. I´m using a timecapsule for backups.
How can I proceed?

I am using a MacBook Pro (2010) with 2.53 GHz Intel Core i5, 4GB, 1067 MHz, DDR3, Startvolume Macintosh HD.
After downloading the package and starting upgrading it asks acceptance of the license-agreement. After that it asks for the volume were to install. And when I click on the Startvolume Macintosh HD (which is the only available on the machine) it says: "The volume is already being used for Time Machine-Backups".
It doesn´t offer to skip that point or to reconfigure the Time Machine settings.
The point is that my Time machine is not and has never used the Mac HD for Backups. In the past I have used an external drive and since 05/2014 I am using a Time Capsule which is appropriately addressed in the Time Machine settings.

What is disk utility, what is used for?

What is disk utlity, & what it used for?

It is used for a variety of things, including disk repair (if the data structures that keep track of data on the disk get corrupted), repair of permissions on the system files if they get messed up, erasing and partitioning disks, etc. As Linc points out, Disk Utility's help can give you all the details. Note that some things cannot be done to the system drive unless you start up from a different drive.
Also, note that if you're asking because you're deleting apps that you don't use, you really shouldn't do that with the preinstalled Apple apps, even if you think you don't have a use for them. Sometimes deleting them can have unexpected side effects, and you never know when you might need such an app.

HT201320 I use my college's email address through outlook and I don't know what you use for the incoming and outgoing host?

My email is though the college where I work. We use Outlook, and I am trying to set up my email but I am not sure what to use for my incoming and outgoing host information.

Ask your college. Most likely the same settings as you have set in Outlook.

Can time capsule be used for wireless backup without serving as a router?

can time capsule be set and used for wireless backup without serving as a router?

Not if you want it to work.
If you do want stand alone .. ie a TC sitting all on its lonesome with no internet connection.. then reset to factory and start over..
The TC has to be in router mode so it can handle dhcp and addressing.
Ignore all the problems.
BUT then you can connect your computer to TC for backup
OR
you can connect to main wireless router for internet..
You cannot do both.. at the same time.
UNLESS you have ethernet connection.. to either main modem or TC.. if you have two networks and two different network clients, then you can do both at once but the setup is tricky.

What to use for INITIAL_CONTEXT_FACTORY for Sun AppServer Platform Ed 8x

I've got an external java JMS client trying to connect to Sun Java System Application Server Platform Edition 8.1 2005Q1 and I need to know what to use for the Context.INITIAL_CONTEXT_FACTORY (and what jar it's in) plus the PROVIDER_URL for the following code:
Properties p = new Properties();
p.setProperty(Context.INITIAL_CONTEXT_FACTORY, ????);
p.setProperty(Context.PROVIDER_URL, ????);
Context ctx = new InitialContext(p);
QueueConnectionFactory qcf = (QueueConnectionFactory)ctx.lookup(factory);

I experienced similar problems while trying to create a Message Driven Bean
and send a message to it from a standalone client program.
After much guddling around (and finally finding some helpful information in
the App Servers Troubleshooting Guide) I managed to get this to work by doing
the following:
     1) Including the following jars at client compile time:
          appserv-rt.jar
          j2ee.jar
     2) Including the following jars at client run time:
          appserv-rt.jar
          j2ee.jar
          appserv-admin.jar
          imqjmsra.jar
     3) Passing in the following arguments at client run time:
          -Dorg.omg.CORBA.ORBInitialHost=localhost
          -Dorg.omg.CORBA.ORBInitialPort=3700
     4) Creating the context using the no-arg InitialContext method � i.e.
          Context ctx = new InitialContext();
     Note that this method picks up the initial context factory
     as com.sun.enterprise.naming.SerialInitContextFactory from
     a jndi.properties file in appserv-rt.jar.
I have included my client code below FYI.
import javax.jms.Connection;
import javax.jms.ConnectionFactory;
import javax.jms.JMSException;
import javax.jms.MessageProducer;
import javax.jms.Queue;
import javax.jms.Session;
import javax.jms.TextMessage;
import javax.naming.Context;
import javax.naming.InitialContext;
import java.util.Date;
* @author dlowe8
public class JmsTest2 {
/** Creates a new instance of JmsTest2 */
public JmsTest2() {
public static void main(String[] args) {
Connection c = null;
try {
Context ctx = new InitialContext();
String factoryJndiName = "jms/ConnectionFactory";
String queueJndiName = "jms/Queue";
System.out.println("Factory JNDI Name = " + factoryJndiName);
System.out.println("Queue JNDI Name = " + queueJndiName);
     ConnectionFactory cfa = (ConnectionFactory)ctx.lookup(factoryJndiName);
     c = cfa.createConnection();
Session s = c.createSession(false, Session.AUTO_ACKNOWLEDGE);
Queue q = (Queue)ctx.lookup(queueJndiName);
MessageProducer producer = s.createProducer(q);
TextMessage m = s.createTextMessage();
m.setText("Helloooo from standalone program at " + new Date());
producer.send(m);
s.close();
Object o = ctx.lookup(factoryJndiName);
System.out.println("Factory object class [" + o.getClass().getCanonicalName() + "]");
o = ctx.lookup(queueJndiName);
System.out.println("Queue object class [" + o.getClass().getCanonicalName() + "]");
} catch (Exception e) {
e.printStackTrace();
} finally {
if (c != null) {
try {
c.close();
} catch (JMSException e) {}
System.exit(0);
}

What to use for the events of 2 keys pressed simultaneously?

Question:
What to use for the events of 2 keys pressed simultaneously? As the key listener has limited functionality, in this case, I need something that can act to two events (see below)
Goal
1. A user presses right and up at the same time
2. Program responds to this event changing BOTH the vertical and horizontal speeds of the player
Problem
I currently have a key listener to do this, using key pressed, however, it only acts to up OR right at one point in time. So the user can only increase his or her vertical speed; or horizontal speed at one point in time. Instead of increasing them both.
Example
Here is an example of the game: http://www.kongregate.com/games/MINDistortion/bubbles-2

DarrylBurke wrote:
I don't know whether there's a better way (or whether this will work as expected), but I would try setting a boolean flag on keyPressed and reset the flag on keyReleased, for each key of interest. To compute the x / y movements, I would check the state of all flags.
dbI was thinking about your answer a few nights ago. And I was like, wait... it works! I thought, at first (as I replied before) that it wouldn't work, but I refract what I said. Its actually a very simple solution. And I apologize for questioning your solution previously. Thanks so much!
P.S. I tested it out. Works like a charm.
-Create booleans to handle each key
-Set to true on press
-Set to false on release
-Check and update in separate thread accordingly

What to use for online backups.

Similar Messages

Maybe you are looking for