What to use to create a picture and video slideshow/presentation?
I was curious as to what someone would use in order to create a picture and video presentation/slideshow?
I think that iPhoto does a good job with getting all your pictures in order, and then using the templates and choosing your music to create a slideshow. However, if one wanted to include some video and narration into the slideshow, I imagine that they would need to use iMovie as well.
I know that you can drop images into iMovie as well, and I think they are automatically given Ken Burns effect, but if you have a lot of images, I think it gets pretty tedious working with all those photos, when iPhoto will already do all of that for you.
So, long story short. I would like to make a presentation with video and images. I would like to use multiple songs, and possible trim the amount of each particular song down, so there is some sort of mix/flow from one song to the other. I would also like to be able to record a narration and include it in the slideshow. I know that iMovie does a lot of that...I saw the narration feature, and the ability to trim the songs back some, and include more than one song. It also has the ability to choose only the portion of video that I want. So would you pre-create the photo portion of your slideshow in iPhoto, convert it to a movie, and dump it into iMovie? That seems clunky.
What process would you use? In my mind, I picture using a program that had some sort of timeline in order to be able to fine tune the audio and video, and iMovie has a timeline of sorts.
Currently running iLife '09.
Ian
Ian
I've been working for the last three weeks on a project like the one you describe. It turns out to be far beyond my limited competence, but I'm committed and have to trudge on.
Mine may be a little different from yours in that it has the equivalent of 106 "slides." There are twenty video. The "stills" are either text I've made in Word and saved to iPhoto as a pdf doc or photos. I've engaged actors to read the text that goes with most of still-slides. I thought I could create individual slides with the sound 'attached,' string them together and then make a movie out of the Power Point or Keynote slide show.
Nothing has worked so far.
iMovie has been a special heartbreaker. I've had at least a half-dozen chats with Apple Care and a couple of trips to an Apple Store to solve one challenge after another.
I can help with Ken Burns. Tedious is not a strong enough word, and the 'help' menu is not helpful, because it is Wrong., The controls are NOT the least bit intuitive. In fact, they make no sense - at least to me.
[I gave up on iMovie the first time because of Ken and the absence of intelligible instructions to make him leave.]
(1) Not finding the control. "Help" says to click on the crop icon on the tool bar (between mic and i) or to type "C". All I get is the crop function - Ken is nowhere to be seen.
(2) Finding it. The crop icon that should have been designated is accessible when you select a still photo. The hand icon appears; on the left side there is column of three icons. On top is Crop; the middle is the duration for the still - the default default is "4 s" // the bottom icon is the gear. Click the gear; there are four rows of choices; click the one at the bottom "cropping, Ken Burns & Rotation". At the top left corner there are three boxes "fit | crop | Ken Burns"// select "Fit" and Ken Burns is turned off. Why is "fit" is the opposite of "Ken Burns"? I don't know.
Here's a warning and a sad tale. I spent about three days getting the first 64 still/videos/transitions and audio clips assembled the way I wanted them.The audio for 65 went in okay and it looked okay, but nothing would make it play. 66 was okay but not 67 or any subsequent attempt - although the videos after 67 were okay.
During my final Apple Care conversation the diagnosis was: "corruption." Start over again with a new project!
I could select, copy and paste the visuals in those three moves, but the audios had to go over one at a time. Since you can't have two projects going at the same time, I'd have to copy one audio clip from the old project, select the new project and wait for it to come up, make the paste, and then wait for the old project to come up.
So watch out. I gave up on iMovie because the recreation of a new project would be so agonizing and with such a big project, I don't know how to avoid "corruption" for sure, and neither did the guy at Applecare. I switched to iPhoto, but after a day I realize that it's audio capability requires a process as tedious as trying to redo the iMovie.
Final Cut Pro is probably the right program but that's a whole other thing.
bhb
Similar Messages
-
i used my i pad for the first time to take pictures and videos. Do I download it on my I mac before using it as a power point presentation? I also want to separate my pictures and my videos? This also the first time that I'm using the apple support communities.
You can import the videos and photos using iPhoto or Image Capture on your Mac.
Connect the iPad to the Mac with the cable and launch either of those two applications on the Mac. Your iPad should appear as a device in the left side of the app. Click on the iPad name and then you should have access to all of the photos and Vidoes in the camer roll and you can import them onto the Mac.
Im not sure what the reference is to Power Point in this case. You can use the imported photos and videos in a Power Point presentation after you import them to the Mac.
Are you trying to create a Slide Show on the iPad? Is that what you mean by a Power Point presentation? -
I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
What is procedure for creating new vendor and material master data in ABAP
What is procedure for creating new vendor and material master data in ABAP .
see below code which is used for creation of vendor master as well as extension...
*& Report ZFC_VENDOR_CREATE *
REPORT ZFC_VENDOR_CREATE LINE-SIZE 100
NO STANDARD PAGE HEADING
MESSAGE-ID ZZ.
TABLES
TABLES : SSCRFIELDS. " Fields on selection screens
CONSTANTS
DATA : C_SPLIT TYPE C VALUE '#'. " Used for Has Separator in GUI_UPLAOD
TYPES
Int'table to hold Vendor Master Data
TYPES : BEGIN OF TY_VENDOR_MASTER,
FLAG TYPE C, " Update Flag
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
KTOKK TYPE KTOKK, " Account Group
ANRED TYPE ANRED, " Title
NAME1 TYPE NAME1_GP, " Name1
NAME2 TYPE NAME2_GP, " Name2
SORTL TYPE SORTL, " Search Term 1
SORT2 TYPE AD_SORT2UL, " Search Term 2
STRAS TYPE STRAS_GP, " Street
PSTLZ TYPE PSTLZ, " Postal Code
ORT01 TYPE ORT01_GP, " City
REGIO TYPE REGIO, " Region
LAND1 TYPE LAND1_GP, " Country
SPRAS TYPE SPRAS, " Language
VBUND TYPE RASSC, " Trading Partner
BANKS TYPE BANKS, " Country
BANKL TYPE BANKK, " Bank Key
BANKN TYPE BANKN, " Bank Account
BKONT TYPE BKONT, " Bank Control Key
BANKA TYPE BANKA, " Name of Bank
AKONT TYPE AKONT, " Reconciliation Account
FDGRV TYPE FDGRV, " Cash Management Group
ZTERM TYPE DZTERM, " Payment Terms
REPRF TYPE REPRF, " Check Double Invoice
ZWELS TYPE DZWELS, " Payment Methods
XPORE TYPE XPORE, " Pay all items separately
END OF TY_VENDOR_MASTER,
Int'table to hold Vendor Extend Data
BEGIN OF TY_VENDOR_EXTEND,
FLAG TYPE C, " Update Flag
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
KTOKK TYPE KTOKK, " Account Group
REF_LIFNR TYPE LIFNR, " Reference Vendor Number
REF_BUKRS TYPE BUKRS, " Reference Company Code
AKONT TYPE AKONT, " Reconciliation Account
FDGRV TYPE FDGRV, " Cash Management Group
ZTERM TYPE DZTERM, " Payment Terms
REPRF TYPE REPRF, " Check Double Invoice
ZWELS TYPE DZWELS, " Payment Methods
XPORE TYPE XPORE, " Pay all items separately
END OF TY_VENDOR_EXTEND,
Int'table to hold Error Records Data
BEGIN OF TY_ERROR,
MSG(200) TYPE C, " To hold Message
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
END OF TY_ERROR.
DATA (Simple Fields)
DATA : W_COUNT TYPE I, " Variable to hold count of Records
W_SUCC_REC TYPE I, " No. of Success Records
W_SUCC_REC1 TYPE I, " No. of Updated Records
W_ERR_REC TYPE I, " No. of Error Records
w_noupdate_rec type i. " No. of Records not Changed
INTERNAL TABLES
Int'table to hold uploaded data from File
DATA : IT_VENDOR_MASTER TYPE STANDARD TABLE OF TY_VENDOR_MASTER,
WA_IT_VENDOR_MASTER TYPE TY_VENDOR_MASTER,
IT_VENDOR_EXTEND TYPE STANDARD TABLE OF TY_VENDOR_EXTEND,
WA_IT_VENDOR_EXTEND TYPE TY_VENDOR_EXTEND,
WA_IT_BDCDATA TYPE BDCDATA,
IT_BDCDATA TYPE STANDARD TABLE OF BDCDATA,
WA_IT_MESSTAB TYPE BDCMSGCOLL,
IT_MESSTAB TYPE STANDARD TABLE OF BDCMSGCOLL,
IT_ERROR TYPE STANDARD TABLE OF TY_ERROR,
WA_IT_ERROR TYPE TY_ERROR,
it_error_fk01 type standard table of ty_error,
wa_it_error_fk01 type ty_error,
it_error_fk02 type standard table of ty_error,
wa_it_error_fk02 type ty_error,
it_succ_rec1 type standard table of ty_error,
wa_it_succ_rec1 type ty_error,
it_noupdate type standard table of ty_error,
wa_it_noupdate type ty_error.
FLAGS
DATA : FL_FLAG1 TYPE C, " Flag to check error upload file
FL_FLAG2 TYPE C, " Flag to hold value
FL_FLAG3 TYPE C, " Flag to hold value
FL_FLAG4 TYPE C. " Flag to hold value
SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-001,
POSITION POS_LOW.
PARAMETERS : P_FILE(128) DEFAULT 'C:\UPLOAD.TXT' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-002,
POSITION POS_LOW.
PARAMETERS : P_VENMAS RADIOBUTTON GROUP R1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-003,
POSITION POS_LOW.
PARAMETERS : P_VENEXT RADIOBUTTON GROUP R1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-004,
POSITION POS_LOW.
PARAMETERS : P_MODE(1) DEFAULT 'N'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-005,
POSITION POS_LOW.
PARAMETERS : P_GROUP(12) DEFAULT 'ZFC_VENDOR_C' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-016,
POSITION POS_LOW.
PARAMETERS : P_GROUP1(12) DEFAULT 'ZFC_VENDOR_U' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Form to get file path for upload of data
PERFORM GET_FILE_PATH.
AT SELECTION-SCREEN ON BLOCK B1.
Form to Validate data specified on Selection Screen
CHECK SSCRFIELDS-UCOMM EQ 'ONLI'.
PERFORM VALIDATE_DATA.
START - OF - SELECTION
START-OF-SELECTION.
IF P_VENMAS = 'X'.
Form to upload data from Presentation Server for Vendor Master
PERFORM UPLOAD_DATA TABLES IT_VENDOR_MASTER.
IF FL_FLAG1 NE 'X'.
SORT IT_VENDOR_MASTER BY LIFNR BUKRS KTOKK.
DELETE IT_VENDOR_MASTER WHERE LIFNR = ' '
AND BUKRS = ' '
AND KTOKK = ' '.
Form to process data for Vendor Master
PERFORM INSERT_VENDOR_MASTER_DATA.
ENDIF.
ELSEIF P_VENEXT = 'X'.
Form to upload data from Presentation Server for Vendor Extend
PERFORM UPLOAD_DATA TABLES IT_VENDOR_EXTEND.
IF FL_FLAG1 NE 'X'.
SORT IT_VENDOR_EXTEND BY LIFNR BUKRS KTOKK.
DELETE IT_VENDOR_EXTEND WHERE LIFNR = ' '
AND BUKRS = ' '
AND KTOKK = ' '.
Form to process data for Vendor Master
PERFORM CHK_AND_INS_VENDOR_EXTEND_DATA.
ENDIF.
ENDIF.
END - OF - SELECTION
END-OF-SELECTION.
IF FL_FLAG1 NE 'X'.
FORMAT COLOR 7.
WRITE:/2 TEXT-O01. " Total Number of records read :
FORMAT COLOR OFF.
WRITE:40 W_COUNT.
FORMAT COLOR 7.
WRITE:/2 TEXT-O02. " Total Number of Success records :
FORMAT COLOR OFF.
WRITE:40 W_SUCC_REC.
FORMAT COLOR 7.
WRITE:/2 TEXT-O07. " Total Number of Updated records :
FORMAT COLOR OFF.
WRITE:40 W_SUCC_REC1.
FORMAT COLOR 7.
WRITE:/2 TEXT-O08. " Total Number of Unchanged records :
FORMAT COLOR OFF.
WRITE:40 W_noupdate_REC.
FORMAT COLOR 7.
WRITE:/2 TEXT-O03. " Total Number of Error records :
FORMAT COLOR OFF.
WRITE:40 W_ERR_REC.
if not it_succ_rec1 is initial.
skip 1.
perform display_changed_report.
endif.
if not it_noupdate is initial.
skip 1.
perform display_nochange_report.
endif.
IF NOT IT_ERROR IS INITIAL.
SKIP 3.
Form to display error data
PERFORM DISPLAY_ERROR_REPORT.
ENDIF.
IF FL_FLAG2 = 'X'.
SKIP 2.
FORMAT COLOR 4.
WRITE:/2 TEXT-O04. " BDC Session Name for Creation (FK01) :
FORMAT COLOR OFF.
WRITE:40 P_GROUP.
perform display_error_report_fk01.
ENDIF.
IF FL_FLAG3 = 'X'.
SKIP 2.
FORMAT COLOR 4.
WRITE:/2 TEXT-O09. " BDC Session Name for Updation (FK02) :
FORMAT COLOR OFF.
WRITE:40 P_GROUP1.
perform display_error_report_fk02.
ENDIF.
ENDIF.
*& Form GET_FILE_PATH
This form is used to get the specified path for uploading of data from
flat file with the help of F4 function key
FORM GET_FILE_PATH .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = P_FILE.
ENDFORM. " GET_FILE_PATH
*& Form VALIDATE_DATA
This form is used to validate the data given by user on the Selection
Screen and the appropriate message is been displayed when an wrong
entry is inputted
FORM VALIDATE_DATA .
IF SY-BATCH EQ 'X'.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E001(ZZ) WITH TEXT-011.
" Excel file not to be used in Batch Mode
ENDIF.
IF P_MODE NE 'A' AND P_MODE NE 'N' AND P_MODE NE 'E'.
MESSAGE E001(ZZ) WITH TEXT-012.
" Session Mode should be either A or N or E
ENDIF.
ENDFORM. " VALIDATE_DATA
*& Form UPLOAD_DATA
This form is used to upload data from Presentation Server for either
Vendor Master or Vendor Extend
FORM UPLOAD_DATA TABLES P_IT_VENDOR.
DATA : L_FILENAME TYPE STRING,
L_FILETYPE TYPE CHAR10 VALUE 'ASC',
L_HEADER_LENGTH TYPE I VALUE 0,
L_READ_BY_LINE TYPE CHAR01 VALUE 'X'.
MOVE P_FILE TO L_FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = L_FILENAME
FILETYPE = L_FILETYPE
HEADER_LENGTH = L_HEADER_LENGTH
READ_BY_LINE = L_READ_BY_LINE
HAS_FIELD_SEPARATOR = C_SPLIT
TABLES
DATA_TAB = P_IT_VENDOR
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE I001(ZZ) WITH TEXT-006 L_FILENAME.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
FL_FLAG1 = 'X'.
ELSEIF P_IT_VENDOR[] IS INITIAL.
MESSAGE I001(ZZ) WITH TEXT-014. " Uploaded File contains no data
FL_FLAG1 = 'X'.
ENDIF.
ENDFORM. " UPLOAD_DATA
*& Form INSERT_VENDOR_MASTER_DATA
This form is used to process BDC data for Vendor Master
FORM INSERT_VENDOR_MASTER_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR.
sort it_vendor_master by flag.
LOOP AT IT_VENDOR_MASTER INTO WA_IT_VENDOR_MASTER.
W_COUNT = W_COUNT + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_MASTER-LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_MASTER-LIFNR.
if wa_it_vendor_master-flag = 'A'.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_MASTER-LIFNR
AND BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
IF SY-SUBRC EQ 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
WA_IT_ERROR-MSG = TEXT-015.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_MASTER.
PERFORM CALL_TRANSACTION.
ENDIF.
CLEAR : WA_IT_VENDOR_MASTER.
elseif wa_it_vendor_master-flag = 'C'.
IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
PERFORM CLOSE_BDC_SESSION.
fl_flag4 = 'X'.
ENDIF.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_MASTER.
PERFORM CALL_TRANSACTION_FK02.
CLEAR : WA_IT_VENDOR_MASTER.
elseif wa_it_vendor_master-flag = 'N'.
WA_IT_noupdate-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_noupdate-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
WA_IT_noupdate-MSG = TEXT-018.
APPEND WA_IT_noupdate TO IT_noupdate.
W_noupdate_REC = W_noupdate_REC + 1.
CLEAR : WA_IT_noupdate, WA_IT_VENDOR_MASTER.
endif.
ENDLOOP.
IF FL_FLAG3 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM. " INSERT_VENDOR_MASTER_DATA
*& Form POPULATE_BDC_DATA_VEN_MASTER
This form is used to populate BDC data of Vendor Master
FORM POPULATE_BDC_DATA_VEN_MASTER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_MASTER-ZTERM
IMPORTING
OUTPUT = WA_IT_VENDOR_MASTER-ZTERM.
IF WA_IT_VENDOR_MASTER-REPRF = 'Y'.
WA_IT_VENDOR_MASTER-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_MASTER-XPORE = 'Y'.
WA_IT_VENDOR_MASTER-XPORE = 'X'.
ENDIF.
if wa_it_vendor_master-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_MASTER-KTOKK,
BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_master-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
BDC_FIELD USING 'BDC_OKCODE' '=MALL',
BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-D0110' 'X',
BDC_FIELD USING 'RF02K-D0120' 'X',
BDC_FIELD USING 'RF02K-D0130' 'X',
BDC_FIELD USING 'RF02K-D0210' 'X',
BDC_FIELD USING 'RF02K-D0215' 'X',
BDC_FIELD USING 'RF02K-D0220' 'X',
BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0110',
BDC_FIELD USING 'LFA1-ANRED' WA_IT_VENDOR_MASTER-ANRED,
BDC_FIELD USING 'LFA1-NAME1' WA_IT_VENDOR_MASTER-NAME1,
BDC_FIELD USING 'LFA1-NAME2' WA_IT_VENDOR_MASTER-NAME2,
BDC_FIELD USING 'LFA1-SORTL' WA_IT_VENDOR_MASTER-SORTL,
BDC_FIELD USING 'LFA1-STRAS' WA_IT_VENDOR_MASTER-STRAS,
BDC_FIELD USING 'LFA1-ORT01' WA_IT_VENDOR_MASTER-ORT01,
BDC_FIELD USING 'LFA1-PSTLZ' WA_IT_VENDOR_MASTER-PSTLZ,
BDC_FIELD USING 'LFA1-LAND1' WA_IT_VENDOR_MASTER-LAND1,
BDC_FIELD USING 'LFA1-REGIO' WA_IT_VENDOR_MASTER-REGIO,
BDC_FIELD USING 'LFA1-SPRAS' WA_IT_VENDOR_MASTER-SPRAS,
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_DYNPRO USING 'SAPMF02K' '0120',
BDC_FIELD USING 'LFA1-VBUND' WA_IT_VENDOR_MASTER-VBUND,
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_DYNPRO USING 'SAPMF02K' '0130',
BDC_FIELD USING 'LFBK-BANKS(01)' WA_IT_VENDOR_MASTER-BANKS,
BDC_FIELD USING 'LFBK-BANKL(01)' WA_IT_VENDOR_MASTER-BANKL,
BDC_FIELD USING 'LFBK-BANKN(01)' WA_IT_VENDOR_MASTER-BANKN,
BDC_FIELD USING 'BDC_OKCODE' '=BANK',
BDC_DYNPRO USING 'SAPLBANK' '0100',
BDC_FIELD USING 'BNKA-BANKA' WA_IT_VENDOR_MASTER-BANKA,
BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
BDC_DYNPRO USING 'SAPMF02K' '0130',
BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
BDC_DYNPRO USING 'SAPMF02K' '0210',
BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_MASTER-AKONT,
BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_MASTER-FDGRV,
BDC_FIELD USING 'BDC_OKCODE' '=/00',
BDC_DYNPRO USING 'SAPMF02K' '0215',
BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_MASTER-ZTERM,
BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_MASTER-REPRF,
BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_MASTER-ZWELS,
BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_MASTER-XPORE,
BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM. " POPULATE_BDC_DATA_VEN_MASTER
*& Form BDC_DYNPRO
This form is used to move data to BDCDATA int'table
FORM BDC_DYNPRO USING PROGRAM TYPE BDC_PROG
DYNPRO TYPE BDC_DYNR.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-PROGRAM = PROGRAM.
WA_IT_BDCDATA-DYNPRO = DYNPRO.
WA_IT_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM. " BDC_DYNPRO
*& Form BDC_FIELD
This form is used to move data to BDCDATA int'table
FORM BDC_FIELD USING FNAM TYPE ANY
FVAL TYPE ANY.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-FNAM = FNAM.
WA_IT_BDCDATA-FVAL = FVAL.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM. " BDC_FIELD
*& Form CALL_TRANSACTION
This form is used to Call FK01 for processing of data either for
Vendor Master or Vendor Extend. The error records are inserted to
Session which can be processed using SM35
FORM CALL_TRANSACTION .
DATA : L_OPTION TYPE CTU_PARAMS,
L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01'
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
W_SUCC_REC = W_SUCC_REC + 1.
ELSE.
IF FL_FLAG2 NE 'X'.
PERFORM OPEN_BDC_SESSION.
FL_FLAG2 = 'X'.
ENDIF.
PERFORM BDC_INSERT.
W_ERR_REC = W_ERR_REC + 1.
PERFORM ERROR_RECORD_DATA.
ENDIF.
ENDFORM. " CALL_TRANSACTION
*& Form OPEN_BDC_SESSION
Form used to open session for Error out Records
FORM OPEN_BDC_SESSION .
DATA : L_USERID TYPE APQ_MAPN, " Variable to hold user-id
L_GROUP TYPE APQ_GRPN. " Variable to hold value
MOVE P_GROUP TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = L_GROUP
KEEP = SPACE
USER = L_USERID
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-008. " Unable to open BDC Session
ENDIF.
ENDFORM. " OPEN_BDC_SESSION
*& Form BDC_INSERT
This form is used to insert error records to a Session method
FORM BDC_INSERT .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FK01'
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-009. " Unable to Insert Data to BDC Session
ENDIF.
ENDFORM. " BDC_INSERT
*& Form ERROR_RECORD_DATA
This form is used to process the messages for the error records which
will be displayed on the output report
FORM ERROR_RECORD_DATA .
DATA : L_LINES TYPE I,
L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
CLEAR L_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = WA_IT_MESSTAB-MSGID
LANG = SY-LANGU
NO = WA_IT_MESSTAB-MSGNR
V1 = WA_IT_MESSTAB-MSGV1
V2 = WA_IT_MESSTAB-MSGV2
V3 = WA_IT_MESSTAB-MSGV3
V4 = WA_IT_MESSTAB-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WA_IT_ERROR_fk01-MSG = L_MSG.
ENDIF.
IF P_VENMAS = 'X'.
WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_ERROR_fk01 TO IT_ERROR_fk01.
CLEAR WA_IT_ERROR_fk01.
ENDIF.
ENDFORM. " ERROR_RECORD_DATA
*& Form CLOSE_BDC_SESSION
Form used to close session of the Error Records
FORM CLOSE_BDC_SESSION .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-010. " Unable to Close BDC Session
ENDIF.
ENDFORM. " CLOSE_BDC_SESSION
*& Form CHK_AND_INS_VENDOR_EXTEND_DATA
This form is used to process BDC data for Vendor Extend
FORM CHK_AND_INS_VENDOR_EXTEND_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR, fl_flag4.
sort it_vendor_extend by flag.
LOOP AT IT_VENDOR_EXTEND INTO WA_IT_VENDOR_EXTEND.
W_COUNT = W_COUNT + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR.
if wa_it_vendor_extend-flag = 'A'.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR
AND BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
IF SY-SUBRC NE 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
WA_IT_ERROR-MSG = TEXT-007.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-LIFNR.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_EXTEND-LIFNR
AND BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
IF SY-SUBRC EQ 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
WA_IT_ERROR-MSG = TEXT-015.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_EXTEND.
PERFORM CALL_TRANSACTION.
ENDIF.
ENDIF.
CLEAR : WA_IT_VENDOR_EXTEND.
elseif wa_it_vendor_extend-flag = 'C'.
IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
PERFORM CLOSE_BDC_SESSION.
fl_flag4 = 'X'.
ENDIF.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_extend.
PERFORM CALL_TRANSACTION_FK02.
CLEAR : WA_IT_VENDOR_EXTEND.
elseif wa_it_vendor_extend-flag = 'N'.
WA_IT_noupdate-LIFNR = WA_IT_VENDOR_extend-LIFNR.
WA_IT_noupdate-BUKRS = WA_IT_VENDOR_extend-BUKRS.
WA_IT_noupdate-MSG = TEXT-019.
APPEND WA_IT_noupdate TO IT_noupdate.
W_noupdate_REC = W_noupdate_REC + 1.
CLEAR : WA_IT_noupdate, WA_IT_VENDOR_EXTEND.
endif.
ENDLOOP.
IF FL_FLAG2 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
if fl_flag3 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM. " CHK_AND_INS_VENDOR_EXTEND_DATA
*& Form POPULATE_BDC_DATA_VEN_EXTEND
This form is used to populate BDC data of Vendor Extend
FORM POPULATE_BDC_DATA_VEN_EXTEND .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-ZTERM
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-ZTERM.
IF WA_IT_VENDOR_EXTEND-REPRF = 'Y'.
WA_IT_VENDOR_EXTEND-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_extend-XPORE = 'Y'.
WA_IT_VENDOR_extend-XPORE = 'X'.
ENDIF.
if wa_it_vendor_extend-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_EXTEND-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_EXTEND-BUKRS,
BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_EXTEND-KTOKK,
BDC_FIELD USING 'RF02K-REF_LIFNR'
WA_IT_VENDOR_EXTEND-REF_LIFNR,
BDC_FIELD USING 'RF02K-REF_BUKRS'
WA_IT_VENDOR_EXTEND-REF_BUKRS,
BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_extend-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_extend-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_extend-BUKRS,
BDC_FIELD USING 'RF02K-D0210' 'X',
BDC_FIELD USING 'RF02K-D0215' 'X',
BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0210',
BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_EXTEND-AKONT,
BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_EXTEND-FDGRV,
BDC_FIELD USING 'BDC_OKCODE' '=/00',
BDC_DYNPRO USING 'SAPMF02K' '0215',
BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_EXTEND-ZTERM,
BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_EXTEND-REPRF,
BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_EXTEND-ZWELS,
BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_extend-XPORE,
BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM. " POPULATE_BDC_DATA_VEN_EXTEND
*& Form DISPLAY_ERROR_REPORT
This form is used to display the error records on the output screen
FORM DISPLAY_ERROR_REPORT .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O05. " Error List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O06. " Error List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H03, " Error Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR INTO WA_IT_ERROR.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_ERROR-LIFNR,
17 SY-VLINE,
18 WA_IT_ERROR-BUKRS,
31 SY-VLINE,
32 WA_IT_ERROR-MSG,
100 SY-VLINE.
CLEAR : WA_IT_ERROR.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
ENDFORM. " DISPLAY_ERROR_REPORT
*& Form CALL_TRANSACTION_FK02
Form used to Call Transaction FK02
form CALL_TRANSACTION_FK02 .
DATA : L_OPTION TYPE CTU_PARAMS,
L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK02'
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
W_SUCC_REC1 = W_SUCC_REC1 + 1.
WA_IT_succ_rec1-MSG = Text-017.
IF P_VENMAS = 'X'.
WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_succ_rec1 TO IT_succ_rec1.
ELSE.
IF FL_FLAG3 NE 'X'.
PERFORM OPEN_BDC_SESSION_fk02.
FL_FLAG3 = 'X'.
ENDIF.
PERFORM BDC_INSERT_fk02.
W_ERR_REC = W_ERR_REC + 1.
PERFORM ERROR_RECORD_DATA1.
ENDIF.
endform. " CALL_TRANSACTION_FK02
*& Form OPEN_BDC_SESSION_fk02
Form used to Open session for FK02
form OPEN_BDC_SESSION_fk02 .
DATA : L_USERID TYPE APQ_MAPN, " Variable to hold user-id
L_GROUP TYPE APQ_GRPN. " Variable to hold value
MOVE P_GROUP1 TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = L_GROUP
KEEP = SPACE
USER = L_USERID
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-008. " Unable to open BDC Session
ENDIF.
endform. " OPEN_BDC_SESSION_fk02
*& Form BDC_INSERT_fk02
Form used to insert data into BDC session using FK02
form BDC_INSERT_fk02 .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FK02'
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-009. " Unable to Insert Data to BDC Session
ENDIF.
endform. " BDC_INSERT_fk02
*& Form display_changed_report
Form to display Updated Vendor data
form display_changed_report .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O10. " Updated List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O11. " Updated List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_succ_rec1 INTO WA_IT_succ_rec1.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_succ_rec1-LIFNR,
17 SY-VLINE,
18 WA_IT_succ_rec1-BUKRS,
31 SY-VLINE,
32 WA_IT_succ_rec1-MSG,
100 SY-VLINE.
CLEAR : WA_IT_succ_rec1.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_changed_report
*& Form display_nochange_report
Form to display No Changed data for Vendors
form display_nochange_report .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O12. " No Changes List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O13. " No Changes List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_noupdate INTO WA_IT_noupdate.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_noupdate-LIFNR,
17 SY-VLINE,
18 WA_IT_noupdate-BUKRS,
31 SY-VLINE,
32 WA_IT_noupdate-MSG,
100 SY-VLINE.
CLEAR : WA_IT_noupdate.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_nochange_report
*& Form ERROR_RECORD_DATA1
Form to get Error Message for Changed Vendors
form ERROR_RECORD_DATA1 .
DATA : L_LINES TYPE I,
L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
CLEAR L_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = WA_IT_MESSTAB-MSGID
LANG = SY-LANGU
NO = WA_IT_MESSTAB-MSGNR
V1 = WA_IT_MESSTAB-MSGV1
V2 = WA_IT_MESSTAB-MSGV2
V3 = WA_IT_MESSTAB-MSGV3
V4 = WA_IT_MESSTAB-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WA_IT_ERROR_fk02-MSG = L_MSG.
ENDIF.
IF P_VENMAS = 'X'.
WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_ERROR_fk02 TO IT_ERROR_fk02.
CLEAR WA_IT_ERROR_fk02.
ENDIF.
endform. " ERROR_RECORD_DATA1
*& Form display_error_report_fk01
Form to display Error Report for Master Vendors (FK01)
form display_error_report_fk01 .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O05. " Error List for Vendor Master (FK01)
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O06. " Error List for Vendor Master Extended (FK01)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR_fk01 INTO WA_IT_ERROR_fk01.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_ERROR_fk01-LIFNR,
17 SY-VLINE,
18 WA_IT_ERROR_fk01-BUKRS,
31 SY-VLINE,
32 WA_IT_ERROR_fk01-MSG,
100 SY-VLINE.
CLEAR : WA_IT_ERROR_fk01.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_error_report_fk01
*& Form display_error_report_fk02
Form to display Error Report for changed Vendors (FK02)
form display_error_report_fk02 .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O14. " Error List for Vendor Master (FK02)
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O15. " Error List for Vendor Master Extended (FK02)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number -
WHATS THE USE OF TABLE STRIP CONTROL AND TABLE VIEW CONTROL
WHATS THE USE OF TABLE STRIP CONTROL AND TABLE VIEW CONTROL
Subhash,
You create and distribute a model in BD64. The details of that are stored in this tables.
A model gives you the details of the sender / receiving systems and what are the message types that are getting transferred between these systems.
Regarding the IDOC segments issue, can you explaing how are you triggering the IDOC and which message / idoc type you are dealing with.
Regards,
Ravi
Note :Please mark the helpful answers
Message was edited by: Ravikumar Allampallam -
What does "Only DRM free/unprotected" mean when trying to transfer pictures and videos to my laptop?
Only Digital Rights Management music and video which you do not own rights to copy or use cannot be placed on your device.
songs you have paid for or own outright will not have those restrictions.
hope that helped?
Good Luck -
I had pictures and videos on my I phone 4s which I tried to put onto my laptop and I don't know what I pressed on I tunes it just completely wiped out all my data, how can I get all that back I've been told e everything is still in the phones hardware does anyone know how I can get it back??? Need help please???
Do you see them on the phone? If not, they are NOT "still in the phones hardware".
It's hard to suggest a course of action when we don't know what you did and you are unable to tell us.
If they are not on your computer, and they are not on the phone, I don't know what else to suggest...
Were you using iCloud? Did you have photo stream enabled? If you did, they would have been uploaded to iCloud. If you did not, then they are gone. -
How do you date and time stamp pictures and videos using a EOS Rebel T3?
I am needing to utilize date and time stamping on videos and photos in my work. The pictures and videos must display time, a date, and reference number. I have gone through the cd, owner's manuel and software manuel and I am unclear if I can perform this function.
While this is a relatively common feature on point & shoot cameras -- where the photo is thought of as a snapshot to document a memory in a person's life, among DSLR cameras it's not very common (I don't actually know of a DSLR that does this though I don't doubt that it may exist). DSLR users are usually expecting a higher quality image -- so now the image is thought of more like art and less like a snapshot and the date/time in the corner distracts from the image. Also they tend to be more advanced users who would be able to modify the image themselves so they have little need for such a feature.
The camera does record the date & time... but it's in the EXIF data (information recorded into the image file but not displayed).
SO... there are programs that will just do this. You'll need to do a search (I found several but have never tried one so I can't vouch for them). I think there are Photoshop plug-ins that do this (assuming you have Photoshop). These programs allow you to define the info you want printed (including EXIF data such as date/time) and you get to pick the location, font, size, color, etc. and ultimately the location on the image where you'd like the info displayed. They then add the info visibly onto the image for you and most support "batch" use (e.g. drop a whole folder of images on it and they'll do them all.)
Tim Campbell
5D II, 5D III, 60Da -
I have a Nikon AW100 and I use a SanDisk for the memory and I download that with My Pictures and Videos but I cant get my videos onto IMovie
Hi
I import all from my Nikon - into iPhoto
Then closing it and opening iMovie
In the Event window like
• iPhoto-videor - Here I find mine.
Yours Bengt W -
Can vmware player be used to create windows pc and mac. Will I need any other software or hardware to do that?(Have Windows and Mac on same computer)
Since you posted this in the iPod Touch forum and didn't provide enough information to contradict that I am going to say the it can't be done. VMWare does work in iPods.
Allan -
Does iCloud backup my pictures and videos? Those captured on the iPhone is what my interest is... Thanks
Yes. http://support.apple.com/kb/PH12519.
-
My facebook app on Ipad downloads pictures and videos very slow. a few of the pics are also blurred.What to do?
Hi Skye_Starkey,
Im sorry to hear that you are having issues with your internet service. I know this can be very frustrating and I apologise for the inconvenience.
You can check to see if there is an outage in your area by entering your postcode and suburb in our service status checker: http://servicestatus.telstra.com/servicestatus/goc.do?q=summary.html
Please powercycle your modem and computer: Unplug from power > Leave off for 10 - 15 mins > then Plug back in and re start. This will often force a line update through to your modem advising the signal is restored.
Please make sure you have not exceeded you monthly usage allowance and have been shaped (slowed). You can do this via My Account http://tel.st/cpyn
Here are some other DIY support tools you can try.
Is your ADSL service running as fast as it could be?
http://crowdsupport.telstra.com.au/t5/Coverage-Network-KB/Is-your-ADSL-service-running-as-fast-as-it-could-be/ta-p/311953
How to test your speed
http://crowdsupport.telstra.com.au/t5/Home-Broadband-KB/Testing-your-broadband-speed/ta-p/278139
Make sure your modem settings are correct
http://crowdsupport.telstra.com.au/t5/Modems-Hardware-KB/BigPond-Modem-settings/ta-p/251263
ADSL Self service tool:
https://www.telstra.com.au/webforms/cares/
Change your line profile:
http://crowdsupport.telstra.com.au/t5/General-Internet-KB/Change-your-ADSL-Line-profile/ta-p/110182
How to peform an Isolation test:
http://crowdsupport.telstra.com.au/t5/General-Internet-KB/How-to-perform-an-Isolation-Test/ta-p/55014
ADSL Troubleshooting tips
https://go.telstra.com.au/helpandsupport/-/adsl-troubleshooting-tips
If you try all the steps in these articles and have no luck with your connection, Please speak to our Technical support team. You can contact them
on 133933 or you can also contact them via our Live chat service here: http://tel.st/49kl
Regards - Tom
-
if i have to get a new iphone but i want to save my pictures and video, what is the beve way without uploading them all to my computer
Set up DROPBOX account on computer and upload pictures to computer.
-
What is the best All in One program for picture and video editing?
Hello i am new to photoshop and would like to really make some fantastic photos and video for my family and friends. I want to add effects to video and Edit photos to the 10th degree. Can someone please recommend an Adobe program. Should i get CS4 extended should i get master suite? Also where can i watch Video Tutorials that start from the basic and lead to the complex. Thanks in advance
What is the best All in One program for picture and video editing?
There is no such thing. If there were, nobody would bother writing different applications. If you are primarily focused on still image editing and video, Adobe Production Premium is the way to go. You can find any number of tutorials just by searching Google and many good ones are linked from the Adobe help systems as well.
Mylenium -
Updated iPad2 to iOS 6 and lost all pictures and videos
I updated my roomate's iPad 2 days ago, following the instructions of a friend with years of Apple experience.
He explained that I would need to install iTunes on my laptop (a newer Asus running Win7) and that just plugging the iPad in would start an automatic process of backing up and updating.
Being from the PC world, I wanted to make sure we would be safe. I asked if I needed to copy pictures to my laptop or pc first, and he said that iTunes defaults to backing up first, then running the update.
Of course this makes sense, but erring on caution, I was very specific in wanting to make absolutely sure.
So I get the laptop ready. I plug in the iPad, it's immediately discovered and a window pops up saying there is an update for the iPad, and would I like to update now.
I pressed the button yes, or ok, I don't remember exactly what the vernacular was.
The lengthy process began.... with a status bar and activity..... took about 20 minutes.
After it was done, it said so. I don't remember the dialog box wording at that point exactly.
I pushed the home button on the iPad and it had the normal grey lock screen, opened it, and all of her apps were there, her email showed she had email,
but when i looked in the pictures folder, it was empty.
Thought perhaps they would appear later from iTunes. ( I didn't know at this point that she had never backed up or used iTunes for anything other than the initial activation and for her old iPhone that died several months ago)
Called my Apple friend, he said maybe I unplugged the iPad before it was able to restore things to the iPad.
So I started iTunes, attached the iPad , right clicked on "Tiffany's ipad" and went into the Backup section. There it says that the iPad was never backed up on this computer in bold text. And the option to restore from backup is grayed out.
I call my expert friend again. He has me look for backup files on the laptop, utilizing an application called 'iExplore'. went to 'device' section and there is a box that will show all backup files found on the pc. That box was empty.
What's tragic, is, this poor lady, unbeknownst to me, had been using her iPad as a picture and video dump for ALL of her child's pictures and vids for over a year. Without telling me. She is not a technical person.
Had I known this, I would have backed it up manually myself, before the update and all along. I would have made her do it. But I had no idea. I assumed she was plugging it in to her Dell Laptop.. but she never did.
I've run 2 'recovery' programs I got from online that scan for deleted files, but they don't show any of the hundreds of pictures and videos she had, Im sure because it was wiped, not deleted.
All attempts to locate a large backup file on my laptop have come up empty.
She is extremely and unbelievably broken up about this, as am I. I'm furious with Apple for not making the BACKUP stage of the process more tenacious, and with more pop up warnings so that this kind of thing cannot happen. Had I seen that, I would have used an application to MANUALLY copy her stuff.... even though at the time I had NO IDEA she was using her iPad as her ONLY repository for all of her precious media.
Folks, this is a life changing horror for her, and me. I love this woman's little boy as my own, and as a single mom, she was depending on me as a friend in this matter. If I cannot retrieve these images and vids, I fear she will never forgive me, as I'm the 'tech guy' who always has had the answers for everything in the past, and failed her on the most important tech issue in her life, her little boy's life in pictures.
Please, where can I send this iPad for forensic recovery of these images.
I've powered the iPad down until further notice to avoid writing additionally on the internal flash memory.
Thanks,
Lu JohnsonDoesn't sound like you have iCloud? If not, then no, you are out of luck....
GB
Maybe you are looking for
-
After using my computer for some time, CPU usage climbs to about 90% (ca. 65% user / 26% system) and fans run at high speed, but there is no processes that seem to use CPU (other than Activity Monitor itself ~1%). This has happened a few times recent
-
Apart from the main problem of my 3GS rebooting after/during calls I also have an irritation with safari. Clicking links in websites either does nothing the first time then works the second time, works the first time, or opens up a dialogue box askin
-
The unit appears to be functioning properly, but there is no sound coming out of the ear pieces. I have tried other headphones. I can also hear light fuzz that changes when I adjust the volume. Is it on mute somehow?
-
Oracle VM 3.0.2 cloning guest
Hi all, I have issue with disk performance during VM cloning. there is just one virtual disk (35G) and cloning of this this is very long. As I understood OVM is just do copy of this disk and nothing more special. In 3 minutes only 1GB, my network is
-
Received and installed 10g database on Linux (RH 2.1) - configured the listener for a 10g database, started it and can tnsping and connect to it with the @database extenstion - BUT - can't get my windows (9.1 client) to connect! Error below: Please H