What topics i need to learn in ABAP to work on BW in realtime

hi,
can you pls tell me on what topics i need to learn in ABAP  if i had to work on BW in real time.
pls give me the list of topics in ABAP required to work with BW in realtime.
thanks.

"I always work in realtime, by the way, did you find a way to work in the past or future?"
Sometimes I do work, which should have been done the day before!
ec

Similar Messages

  • I updated SCCM 2012 R2 from CU3 to CU4. Where can I find good directions on what else I need to do to make this work?

    I updated SCCM 2012 R2 from CU3 to CU4. Where can I find good directions on what else I need to do to make this work? I'm assuming I have to deploy the new clients?
    Thanks,
    James
    James A+, Network+, MCP

    You have to create different collections (x64 vs x86 clients) because the .msp to be deployed is architecture specific.
    "Distribute content" just distributes binaries to distribution points. You can select a collection there, but that has nothing to do with clients. It just distributes content to DPs that are assigned to collections.
    Torsten Meringer | http://www.mssccmfaq.de
    Ok. That is helpful. I appreciate the response. I hate to ask another question, but I', still learning the product. In the Step-by-Step SCCM 2012 R2 CU4 Installation Guide from System Center Dudes, it says to create the collections by using their predefined
    queries. I tried to enter these as queries but I think I am doing so in the wrong area of the collection creation process. Could you break it down for me?
    Do you know of any good training (free) that is video based an breaks SCCM 2012 R2 down into smaller more detailed steps?
    Thanks,
    James
    James A+, Network+, MCP

  • I have new printer Photosmart C410 and osx10.4.11. What do I need to do to make them work together?

    I have new hp printer Photosmart C410a and Mac osx10.4.11. What do I need to do to make them work together?
    My computer is:
      Model Name:    iMac
      Model Identifier:    iMac6,1
      Processor Name:    Intel Core 2 Duo

    Here is what you need to order:
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    Hope you are backing up anyway, but be sure you have an up to date backup. Repair permissions in Disk Utility, then restart from the Snow Leopard disk you buy (in the above link) and do an upgrade (only changes the OS), not a clean install (which wipes all data). Others on here may chime in on their thoughts on how best to do this, but I've never had trouble over 20+ years doing it this way. If you aren't having crashes and strange problems now you should be fine. Please write back or start a new thread (you'll get more help than continuing in this thread which has printing problems in the header) that has something like "Need help upgrading from Tiger to Snow Leopard" that will attract more help.

  • I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.  What do I need to do to make it work again?

    I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.  What do I need to do to make it work again?  Just a patch/update or do I need to uninstall and install?

    antoniobesteban wrote:
    I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.
    Where are you seeing that information? Got a link?
    According to the Adobe website: Mac OS X Mavericks (10.9) compatibility FAQs | CC, CS6, Acrobat
    Plenty of people, including me, are currently running CC on Mavericks.

  • Can I copy and paste the oil paint filter from CC to CC 2014 in the corresponding folder? What else I need to do to make it works?

    Can I copy and paste the oil paint filter from CC to CC 2014 in the corresponding folder? What else I need to do to make it works?

    Sorry, but that's a no.  Google Photoshop CC 2014 FAQ to find out why

  • I have creative cloud but Lightroom 5 develop does not work.  What do I need to do to get it working

    I have creative cloud but Lightroom 5 develop does not work.  What do I need to do to get it working?

    If lightroom downloaded and installed without any errors, you will get better help with program questions in the program forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
    http://forums.adobe.com/community/lightroom

  • I have Iphoto 9 version 8.1.2 what do I need to download to get iCloud working again for iphoto

    I have I photo 9 version 8.1.2 what do i need to download to get icloud working on Iphoto again
    I have OSX 10.9.1 Mavericks

    What do I need to use My Photo Stream?
    To use My Photo Stream you need an iCloud account, compatible devices, and up-to-date software:
    iPhone, iPad, or iPod touch with iOS 5.1 or later
    Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
    Apple TV (2nd generation) with Apple TV Software Update 5.0 or later
    PC with Windows 7 or later and the iCloud Control Panel 2.1 or later for Windows
    For complete iCloud setup instructions, visit How to set up iCloud.
    Not sure what "working again" means - With iPhoto '09 version 8.1.2 you have never had PhotoStream working
    But you can purchase ioPhoto '11 version 9.5.x in the LNApp store - backup your iPhoto library and install
    LN

  • HT4528 my iphone suddenly says iphone is disabled on the screen and says connect to iTunes account across the front screen, what do i need to do so it will work again??

    i am trying to get my iphone 4s to work again, it suddenly showed up across the screen that iphone is disabled connect to itunes.. so what do i need to do to get it working again?

    1)  Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Hi. my ipad battery is not charging well. max at around 20%. what do i need to do to get it working again?

    hi. my ipad battery is not charging well. max at around 20%. what do i need to do to get it working again?

    You may need to recalibrate the battery. See link below.
    Are you using the wall charger?
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • What skills/Knowledge needed to learn EP....????

    Hi All,
    I am ABAP Developer and now would like to learn EP.
    I dont know Java as of now.
    I would like to know what alkl skills needed (apart from ABAP) for learning EP now???
    Please Guide me in this regard....
    Regards
    Pavan

    Hi,
    You have to know Java & Jsp
    JavaScript, Servlet
    for portal content developement we have WebDynpro for Java
    it purely based java programing.
    Refer this thread you have some idea abt EP
    Best Practices in EP
    Regards,
    Senthil K.

  • Noob here.. what do i need to learn to do similar projects?

    where do I start?
    links attached below
    http://www.midwestmanufacturing.com/MidwestManufacturing/colorChooserPF.do
    http://www.midwestmanufacturing.com/MidwestManufacturing/buildingPlanner.do

    you'll need to learn how to use and customize the combobox and you'll need to learn how to add and remove objects form the stage using code.

  • HT5271 I just updated OSX 10.7.4 and now Safari won't load - what do I need to do to get Safari working again?

    I just updated my operating system to OSX 10.7.4.  Now Safari won't load.
    I ran disc utilities and it still wont load.  It tells me that Safari quit unexpectedly and gives me the option to submit a report of to re-open.
    I have tried to find an updated Safari online but only find 5.1.7 updates for Windows.
    What do I need to do to get Safari back?

    Updating to Safari 6 for Lion may help.
    Click here >  Safari Quits Every Time Opened: Apple Support Communities
    Then click the link posted by:  gregoryfromcork
    That will automatically download this file >  Safari6Lion.pkg.download
    Now quit Safari.
    Go to your Downloads folder and double click that file and follow the instructions for installing.
    Then restart your Mac, try Safari.
    There are no Safari 5.1.7 for Mac standalone downloads available 

  • What do I need for my MacBook Pro to work in the UK

    I am traveling to the UK.  Do I need anything special to plug it in for power being they use 220V there?  And if so, what will I need.

    Just get the appropriate plug. Either a converter from Radio Shack to go from the standard US flat-blade NEMA plug to the funny UK plugs, or the fancy Apple Universal Travel Kit from the Apple Store. The latter has all that you need to plug anywhere in Europe, should the yen arise to take the Chunnel Train and see the Continent.

  • I have an ipad 3 with vz, what do i need to do to make it work in europe

    I have an iPad 3 6.1.3 with cellular network with verizon. I am going to Europe in a couple weeks and need to use my ipad while im there. What do I need to do to make my ipad work?

    Since the EU does not use CDMA technology, your Verizon iPad won't connect to any cellular systems anyway, but it does not hurt to turn cellular data off to preserve battery life.
    Note that if you use Airplane mode that will turn cellular off too, but it also disables GPS (which you may need if you have a navigation app with pre-loaded map and POI data -- highly recommended if you don't know your way around).

  • What do I need to learn to make a responsive website?

    Hiya
    Haven't checked in here for a few years.
    15 years ago or thereabouts, I learned HTML4  (from Castro's book) and hand-coded a website. I managed to create one CSS page.   Whoopee!
    Then I got DW4, and later an update. and that was SWELL.  And there's my level.  I'm not cutting edge, am I?
    These days I maintain a site for some friends, and they'd like to upgrade it.  Half an hour on Google learns me the term "responsive."  Looks like y'gotta be good w/CSS, and be doing HTML5.
    First question, is there a DW update, or any other WYSIWYG program that will convert an existing site into Responsive, or build one more-or-less the way DW does the HTML4 ones?
    Second question, if there isn't, what's the list of things I'd have to learn to reboot myself?  And any suggestion as to where/how?  Remembering what my level is....?
    Thanks
    denno

    Responsive Web Design (RWD) has some limitations.  Honestly, some web designers just can't do it because they're not willing to abandon old-school tables and/or compromise on their design ideas.  But if you approach this with an open mind and don't try to build anything too fancy or restrictive, RWD can be very rewarding. 
    Always consider your mobile users first.  They interact with their devices differently than desktop users.  For example, mobile users need less content and bigger, finger-friendly menus, buttons and forms.  There are volumes written about this subject on the web.  Spend some time learning the theory as well as the code before you dive in to your first RWD project.
    Start with these links:
    Responsive Web Design
    http://coding.smashingmagazine.com/2011/01/12/guidelines-for-responsive-web-design/
    Introduction to CSS Media Queries
    http://www.adobe.com/devnet/dreamweaver/articles/introducing-media-queries.html
    DW CS6 Fluid Grid layouts (17 min video)
    http://tv.adobe.com/watch/learn-dreamweaver-cs6/using-fluid-grid-layouts/
    Step-by-Step tutorial -- Building Fluid Grid Layouts in DW CS6
    http://www.adobe.com/inspire/2012/08/fluid-grid-layouts-dreamweaver-cs6.html
    Good luck!
    Nancy O.

Maybe you are looking for

  • Implicit Type Conversion In Java

    In java any decimal literal is an Integer.Then why the byte b=4; does not generate a compilation error as we are trying to assign integer (larger data type) to an byte(smaller data type).If we try to do float f=4.5; then it gives the compliation erro

  • How to view pdf files in xperia mini pro

    I have downdoaded a Sony ericsson mobile manual in pdf format. I tried to open it in my mobile by using office suit but its not opening. How to solve this problem?

  • Does callableStatement.SetNull() work fine with ojdbc5.jar in oracle 11gr2

    Hello, CallableStatement.setNull(1, Types.ARRAY) throws java.sql.SQLException: Invalid column type: sqlType=2003 and CallableStatement.setNull(1, Types.ARRAY, "SOMEARRAYTYPE") throws java.sql.SQLException: ORA-06531: Reference to uninitialized collec

  • Mismatch found in username and password means clear input componet as well.

    hi jdev experts, Using 11.1.1.5.0 - adfbc stack. my requirement is to simple. while hitting the button the username and password doesnt match with db means it throw the error. at the same time compoenets should clear the value. where should i handle

  • Where are the camera settings?

    I've been looking around the settings in Skype and I can't find anywhere to choose a camera (plugged into my Android TV box) or to change its settings (brightness etc). "Cogito, ergo es. I think, therefore you is." Ray D. Tutto (King of the Moon) to