What triggers the prompt for memory test during boot up of WLC.

I have a controller that sometimes does and sometimes doesn't prompt for memory test at boot up. What triggers the prompt for memory test at boot up?

We have the same behaviour with a 4402 controller.
After a software upgrade from 4.2.130.0 to 4.2.176.0 the controller didn't reboot automaticly during the first restart with the new software. I connected via console and saw this message:
Airespace 4200 Wireless LAN Switch Board - Memory Test
Invalid Option...Press any key to continue
Airespace 4200 Wireless LAN Switch Board - Memory Test
1. Restricted [4kB per MB]
2. Entire Range [512M]
3. EXIT
Then I choosed option <3 Exit> and the controller started correct.
Regards
Hendrik

Similar Messages

What is the USE for a TEST PAGE/Printer Status REPORT

Have you read post or forums and a tech wants you to see if you can print a test page or Printer status report?
This is a test to make sure the printer's function is working correctly. Sometimes you can't print from your printer and everything is stuck and you may think it's the printer. If you can print this test page, then most likely it will be a software issue or connection issue.
The information contained in a test page can help diagnose a printer problem or to review information particular to the printer. Test pages can be printed by using the print control panel or the computer.
The print test page function prints a page with several cartridge print patterns and a numbered list containing printer specific information.
I hope this is helpful to the community.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.
This question was solved.
View Solution.

Thanks for reading.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

What is the reason for this problem during run form

my dears:
usually when I Make run for the form from developer
the browser is empty and the url give me a strange addres like
http://127.0.0.1:3682/Dtq0XxtVRoMVFTRRJDKDT5Z6m36L6nEBQFtKCQhTlAk9ANr0
the correct url http://127.0.0.1:8889/forms/frmservlet
but I not know why this strange address
I make reset to defualt from preference
Iam use
oracle db10g
developer 10g R2
Windows xp
thanks in advance

hi there
when u run form in oracle 10g then u should run 0c4j first then u can run form in oracle 10g.
u can run form from oracle 10g after crtl+r
and also u can run darect from folowing path
http://127.0.0.1:8889/forms/frmservlet?form=formname.fmx
according above path u should paste fmx in following (just example)
d:\deve10g\form

What is the password for 'oracle' user created during XE installation?

Hi,
What is the password for 'oracle' user automatically created when XE is installed?
I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
Please let me know or point me to the document.
Thanks,
N

Hi Jari,
I tried your suggestion, but it didn't work unfortunately.
When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
Thanks,
N

What is the best heap memory setting for JBoss?

I am running a Windows 2003 server and JBoss is running as service. The current heap configurations is 1024, but I am having some problems with the service failing. What is the optimal heap memory setting? Thank you,

There is no optimal memory setting for LiveCycle.
It depends on the components you have chosen to deploy. If Content Services ES2 is deployed, your heap size settings should be about 2 GB, otherwise 1.0 - 1.7 GB might suffice.
http://blogs.adobe.com/livecycle/2010/01/optimal_livecycle_es2_jboss_ru.html

What is the Tcodes for Uploading of data using BDC & CATT

PP members:
I was going through the cutover activities , and what I understood is we transfer all the legacy system data into SAP before going live
The data upload follows certain steps (depends on the organizational design load strategies)
First we upload all the master data ( material master, BOM, W/C's & Routings)
Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as materials of the previous stage and necessary adjustments shall be made after cutover day
At this point, I could not able to understand what does the author mean materials of the previous stage
Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
Is it a must to use only LSMW tool to upload master data or any other upload tools are fine
Lastly,. I am not sure about the Tcode of CATT & BDC
Summary of the questions:
1.What does the author mean material of previous stage, for WIP materials during cutover activities
2. Is it mandatory to use only LSMW tool for uploading for master data
3. What are the Tcodes for upload tools CATT & BDC ?
Thanks for your time
Suren R

Dear,
1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the settings for Transport?

What are the settings for Transport?

u will get three panel in transport connection in BW side
here u need to collect object and drop them to 2nd panel
then u need to select whether u want o select all objects or only necessary objects
select as per ur requirement hten u need to write thse object in a NEw request
now executte nad go to Se10 and relaease sub task and main task
now ask basis team to impot it in QAS test it and again trnasport these to Production environemnt.
assign points if helps

What are the announcements for renting VPS?

What are the announcements for renting VPS? For details, understand VPS and make the choice of rental; for Taiwan VPS and Hong Kong VPS, without records, unlimited contents, wider range, and more efficient experience. Your server will show its excellence with the advantages.
Most station agents become less inclined to virtual hosting, for national space, domain name records are needed, which waste the time; for overseas hosting such as Korea hosting, US hosting, no records, but slower speed than national space; therefore, more and more station agents prefer servers, but because the price of servers are too high, they turn their focus on VPS.
The following are the announcements:
1.Open remote desktop lander:
Start-run-mstsc or start-procedure-nearby-remote desktop connect
2.Several conditions for account halt:
First, client side login cause account halt
Second, certain account quits the remote control in midway when it runs routine
Third, certain routine is restricted by synchronous operation of system administrator.
3. Not install the third party firewall
If you need firewall, please use windows firewall, the third party firewall in VPS will cause system collapse and data loss, the system automatically obtains the newest windows patches and install itself, which do not require human operation. Installing system patches in VPS sometimes will heavily lead to VPS collapse and data loss.
Do not modify remote desktop port.
Because of the specialty of VPS system, default remote desktop port is 3389, do not modify randomly, or the remote connection will be out of work.
4. Except some special conditions that user registration is needed for certain procedure, when the remote connection has been close down, do not forget logout user to save memory resource, and prevent the loading connection next time, if it happens, reboot VPS.
5. VPS has been set with relative security when it was paid, with high security. It suggests that do not open firewall randomly, if you open it by your own, the following ports should be opened: 21(FTP), 3389(remote connection), 80(website http), 3306(MySQL), 1433(SQL Server). Timely check whether there is suspicious account or system log, download 360 safety guard to avoid these files and process.
6. Try not to modify registry hand-actuated, ensure the reboot of VPS. Modify remote ports please add the modified port in firewall first, and then reboot.
7.Modify IIS installation files, backup these files, and then modify them with the software that can keep the file layout, prevent these files from destroying IIS.
8.Website service of VPS and FTP service of IIS are default to open hand-actuated, set Web Publishing Service as automatically if you are station agent. If you often use FTP service of IIS, please set FTP Publishing Service as automatically, i.e. reboot it automatically. If you use serv-u, tick all the system service terms. In the terms of security and resource consumption , it suggests that those users who seldom use FTP do not set it as automatically.

Hi there
"So for ALL the apps, the annual monthly fee is £46.88, but you can rent occasionally for £70.32 pm.... ?" Correct
£17.58 single app plan requires an annual commit - it's £27.34 for the month-to-month plan without annual commit.
Thanks
Bev

What is the use for CREATING VIEW WITH CHECK OPTION?

Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
Karthik

Hi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR

hi... experts....
Iam having one screen in my previous module pool program....and now as per my requirement i added on e new field...
for that...
1. i declared one variable in top include...
2. cretaed one more new block with help of box in layout screen..
3. added some text field and inputput out field...
4. and in that block i also added one line with test like... following...
" NOTE: PLEASE ENTER THE ..... VALUE..." Like this.... just for to give direction...
so these are the steps i taken to add new field to my screen... but here i am geting error ... while entering the value in that field and press any push button.... including back in that screen... like....
"INVAILD FIELD FORMAT (SCREEN ERROR)"
.... ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR... COMMONLY???
THANK YOU,,,
NAVEEN..

hi naveen,
there can be problem from ur layout side.
Goto SE51. in Layout editor make sure that the type in screen and in TOP Include is same.
and if you are using currency field than it can also give error to you.
if still you any error .
give me type of variable whcih you defined in TOP and also code.
give reward if helpfull.

What are the things to be tested in sap xi server before going to use th

1) what are the things to be tested in sap xi server before going to impliment first interface?
2)what are prerequisites to be configured in xi server before implementing first interface?
ragards

Hi Dhanush,
>>>>>1) what are the things to be tested in sap xi server before going to implement first interface?
>>>>>2)what are prerequisites to be configured in xi server before implementing first interface?
For both of your question the answer would be
1. Check all the Post installation configuration has been done properly, with the help of the following links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
2. Make sure the latest BASIS Component have been imported into your design time environment
After this you can start developing your first interface
Regards
Ramesh P

What is the LOB_TYPE for XSL-FO Subtemplate?

I ran an installation script to move a new data definition and several templates (one of which is an XSL-FO subtemplate) into our test region and the concurrent program is finishing with a warning and no report is generated. The error in the OPP is "no corresponding LOB data" which from reading posts, appears to be related to the sub-template. This is the code I used to upload an .rtf template (which worked fine).
java oracle.apps.xdo.oa.util.XDOLoader UPLOAD \
-DB_USERNAME apps \
-DB_PASSWORD $P_APPS_PWD \
-JDBC_CONNECTION $JDBC \
-LOB_TYPE TEMPLATE_SOURCE \
-APPS_SHORT_NAME XXFIN \
-LOB_CODE XXFIN_PSBE6_1_TEMPLATE_PDF \
-LANGUAGE en \
-TERRITORY CA \
-XDO_FILE_TYPE RTF \
-NLS_LANG American_America.WE8ISO8859P1 \
-FILE_CONTENT_TYPE 'application/rtf' \
-FILE_NAME $XXFIN_TOP/admin/import/TEMPLATE_SOURCE_XXFIN_XXFIN_PSBE6_1_TEMPLATE_PDF_en_CA.rtf \
-CUSTOM_MODE FORCE \
-LOG_FILE XXFIN_PSB_EXP_ANN_SUM_UP_TMP.log
This is the code I used to upload the XSL file, but no file was uploaded.
java oracle.apps.xdo.oa.util.XDOLoader UPLOAD \
-DB_USERNAME apps \
-DB_PASSWORD $P_APPS_PWD \
-JDBC_CONNECTION $JDBC \
-LOB_TYPE TEMPLATE_SOURCE \
-APPS_SHORT_NAME XXFIN \
-LOB_CODE XXFIN_PSB_NUMBER_FORMAT \
-LANGUAGE en \
-TERRITORY CA \
-XDO_FILE_TYPE XSL-FO \
-NLS_LANG American_America.WE8ISO8859P1 \
-FILE_CONTENT_TYPE 'application/xsl' \
-FILE_NAME $XXFIN_TOP/admin/import/TEMPLATE_XXFIN_XXFIN_PSB_NUMBER_FORMAT_en_CA.xsl \
-CUSTOM_MODE FORCE \
-LOG_FILE XXFIN_PSB_EXP_ANN_SUM_UP_TMP.log
Is there something wrong with the LOB_TYPE, and if so, what is the LOB_TYPE for a .xsl file?
Thanks for your help.
Tam

-LOB_TYPE TEMPLATE \
...and...
-FILE_CONTENT_TYPE 'text/xml' \

What is the algorithmn for smoothing filtering in Filter VI?

What is the algorithmn for smoothing filtering found in Filter VI of Labview 7?

The Smoothing selection the the Filter Express VI uses a moving average. To do this it implements an IIR filter. You can open the Filter Express VI up and look inside (to a point) to see exactly how it is working. You can't see the algorithm that they used for the IIR itself, however. To open it up, drop one, configure it, and then right click on the icon and select Open front panel from the menu list.
Hope that this helps,
Bob Young
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

What is the brand for mini 110-4111ej Hard drive?

What is the brand for mini 110-4111ej Hard drive?
This question was solved.
View Solution.

HP uses different brands to fit the need for the SATA hard disk, so there is no specific brand that I can state. Why don't you use the hard disk test that is present in the BIOS?
Replacement hard disk specifications
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

What triggers the prompt for memory test during boot up of WLC.

Similar Messages

Maybe you are looking for