What Type of Antenna can I use that will go through trees?

I have two buildings that are just out of line of site...I need an antenna that can go through a couple of trees....the trees are not on our land so we cannot cut them down. I am using 1300 series Wireless Bridges.
Thank You

There isn't!! you can either raise the height of both APs to clear the fresnel zone or the other option is to use other NLOS technology however from past experience even these suffer badly from foliage degradation.
Good Luck

Similar Messages

  • What type of file can be used with file generator in Motion 4?

    Regarding using the File Generator in Motion 4, what type of file can be used? After clicking the browse button in the inspector tab,
    all files appear greyed out and are not selectable.
    Thanks!
    Richard

    Cool. Thanks GFXZen. I was stumped by TextEdit saving files in rich text format. Here is an article on how to save in plain text from TextEdit:
    http://support.apple.com/kb/TA20406

  • What type of collection can I use to store a word and a string as it's valu

    I am writing a grammar checking application. What kind of collection can I use to store the word and the type of word as it's value.
    e.g.(book = noun) (clean = adjetive) (of = predicate) (took = verb)
    or should I use a collection as they type and add the words in each different collection?
    you advice is greatly appreciated.
    thanks,
    steve

    class "Contradiction" contains two variables, the String and what Type was assumed
    Algorithm:
    Parse out next word
    Find all possible meanings/types of word
    Assume first meaning is true, continue (think [push])
    If clause, call clauseParse all over again (think [push])
    Return parsed structure when done, (think [pop])
    If Contradiction rises to top of sentence, there is a grammer problem. Now switch into grammer correction mode.
    If a word can be interpreted two different ways, don't worry about it as long as it's right either way.
    To test for similar-sounding words, use something like SoundX
    _Tim                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • What type of field can I use???

    What is the best type of field to use in 7.5 that a user can select one or many items. We use the ABO (Asset Based Order) version of 7.5 eMedia and I have a request to dynamically pull the products on a given order onto a new field (Product) to be added at the Service Request level, that will pull in products ONLY on that order. Is that even possible to do and what field would be best?

    Hi,
    i understand that you will create a new field in Service Request, where you get the product information based on order related in SR.
    If you create a MVG (MVL fields) structure to return the informations?
    Regards

  • Whats types of inputs can be used with DAQ 6527? (PNP or NPN)

    I need to know what types of input device (PNP or NPN) can be used with a DAQ 6527.

    Greetings,
    The digital inputs of the 6527 require TTL signals. As long as your device, whether it be a pnp or npn transistor, outputs a TTL signal, it will be compatible.
    Regards,
    Justin Britten
    Applications Engineer
    National Instruments

  • What type of Class can I use?

    Hi,
    Here is my dilemma.. I have 2 classes.. We can call them Policy and Quote. I need to have them on the session. I also have a class, BusinessModel, that will also hold onto these "same" objects. This way I can pass BusinessModel around with all the objects I require in my app..
    My dilemma is, If I have many users, how do I keep many instances of the session for both the BusinessModel and the individual objects?
    Thank you in advance!
    Jim

    Hi,
    Here is my dilemma.. I have 2 classes.. We can call
    them Policy and Quote. I need to have them on the
    session. I also have a class, BusinessModel, that
    will also hold onto these "same" objects. This way I
    can pass BusinessModel around with all the objects I
    require in my app..BusinessModel is an object that has references to Policy and Quote objects. Right?
    My dilemma is, If I have many users, how do I keep
    many instances of the session for both the
    BusinessModel and the individual objects?Depends on what your understanding of the problem.
    If there is one session per user, and every user has their own instances of BusinessModel, Policy, and Quote, then you have one for each user.
    If you mean that somehow all users should be looking at the same BusinessModel, Policy, and Quote (funny requirement), then it's not a session thing. They're more like application scope objects.
    When you say "session" it's a loaded term for me. I immediately think of users as web clients, and "session" is a javax.servlet.Session object. Is that what you mean?
    %

  • What type of iviews can be used with WPC?

    Can  BSP, WebDynpro ABAP and JAVA  can be added using WPC? Are there any limitations? How about Object Base navigation?

    That's a very broad statement! Do you mean that you cannot deploy any web dynpro content at all, even if it is launched as a URL iView?
    As I said, you need to try your own content.

  • What type of ram can i use?

    everywhere i look online, says my ms-6528 only supports pc-133 sdram, even in my manual, it says only pc-133 sdram, but on the box itself i have, it says supports pc-133sdram & ddr sdram. so is this a typo, or do they mean its built for pc-133 OR ddr? thanks

    What the?  I've got the exact same mainboard (MS-6528 LE) and the box says "Supports either SDR SDRAM up to 3GB or DDR SDRAM up to 2GB".  This seems to me that there would be two separate types of slots, one for the SDR and one for DDR.  However, looking on the website and looking even in the manual, it says nothing about DDR.  I'm looking to buy some DDR SDRAM for Christmas, so is it not going to fit in the board?  Jeez, this seems like a ripoff.  Buy the board because it says it can handle DDR, and now I fing out the box was lying!

  • What type of monitors can I use with the Mac Mini?

    Hello,
    I was thinking on purchasing a Mac Mini. I was not sure if the monitor I have at work with function with the Mac Mini. It is a: 20" ViewSonic Professional Series P815...
    Does anyone know if this monitor will work with any Mac Mini? Is there an adapter for it?
    Thanks.

    It would be fine for them all - all minis have come with DVI video connectors and adapters to convert that to VGA, so aside from the possibility that the Viewsonic might suffer the greyish or dull screen problem that affected a small(ish) proportion of displays with the first generation mini, it should connect up using the adapter just fine, and be correctly recognized by the system.

  • Which 4K TV can I use that will be best used attached to my new macbook pro 15 Retina

    I would like to hook up a 4K TV to my new macbook pro 15 retina...
    I am not young and I prefer a nice large screen (less than 40") so I can switch from watching TV to using the computer.
    I went to the local Future Shop and I got a whole lot of talk.
    I need better advice.
    I want to know which one is best and how to hook it up to my macbook.(what cables do I use etc)
    I want to retain that retina look on the TV screen.
    HELP!

    Hi, abrahamfrommontreal.  
    Thank you for visiting Apple Support Communities.  
    Here is some information that you may find helpful when researching 4K displays.  
    Using 4K displays and Ultra HD TVs with Mac computers
    http://support.apple.com/kb/HT6008
    Cheers, 
    Jason H. 

  • What type of partition should I use? Range or Hash or ..?

    Hi,
    I am on Oracle 8.1.7.4 .
    I have a table with 10 million rows and looks like its a good candidate for partitioning.
    There is a varchar2 column and the data is evenly distributed on the string value. If I want to partition the table on that string value what type of partitioning can I use. How can I give the range, if I use range partition, on the string value ?
    Can/Should I use hash partitioning?
    I know that there is a list partitioning in O9i, but I am on 8i.
    Please help.
    Regards

    <quote>
    I have a table with 10 million rows and looks like its a good candidate for partitioning.
    </quote>
    Table volume, in itself, is not enough to warrant partitioning … hope you have some other reasons.
    <quote>
    … but would like to partition the table on the mentioned varchar2 column, so that queries would be efficiant.
    </quote>
    Since you don’t mention the actual query or class of queries, maybe it is worth mentioning that partitioning could speed up some queries but also can slow down a lot more other queries.
    <quote>
    So, how can i re-create the table partitioned on a varchar2 column
    </quote>
    No different than numbers or dates?
    create table tp
    ( str   varchar2(10)  not null
    ,fill  char(20)      not null
    partition by range(str)
    ( partition p1 values less than ('F')
    ,partition p2 values less than ('L')
    ,partition p3 values less than ('R')
    ,partition p4 values less than (maxvalue)
    insert into tp
    select substr(object_name,1,10), lpad('x',20,'x')
    from user_objects
    flip@FLOP> select * from tp partition (p2);
    STR        FILL
    F1         xxxxxxxxxxxxxxxxxxxx
    GENERATE_R xxxxxxxxxxxxxxxxxxxx
    IPSDEV.US. xxxxxxxxxxxxxxxxxxxxThe link to Tom’s article is fine … it just happens to be one of the few threads he’s not mentioning that partitioning is not the magic fast=true mechanism … look for some other articles on partitioning and you’ll quickly discover his views on this subject.
    There may be a case for partitioning … but you haven’t presented any reasonable justification for it … so, why bother?

  • What is TYPE GROUP /TYPE-POOL?  When to use that ?

    hello friends
    Can any one tell me
    What is TYPE GROUP /TYPE-POOL?  When to use that ?
    Thanks & Best Regards
    Nilesh

    Type group
    If you want to define global constants, you have to use a type group. The name of
    the type group can only contain a maximum of five characters. In the type group,
    you can define constants using the CONSTANTS statement. As types, you are
    provided with the integrated ABAP types or the global types of the Dictionary.
    In order to be able to use the types of a type group in a program, make the type
    group known using the TYPE POOL statement. From these lines on, you can use
    all constants of the type group.
    The definition of a type group is a piece of ABAP code that is either maintained
    via the Dictionary (SE11) or via the ABAP Editor (SE38).
    Realization:
    The first statement for the type group zmytp is always:
    TYPE-POOL zmytp.This is followed by the definition of data types with the statement TYPES, as
    described under local program data types. Furthermore, cross-program constants
    can be declared using the CONSTANTS statement. All names of this data type
    and constants must begin with the name of the type group and an underline:
    zmytp_
    In an ABAP program, type groups must be made known with the following
    statements before they are used:
    TYPE-POOLS zmytp.
    When using this statement, all data types ansd constants, which are defined in the
    zmytp type group can be used in the program. Several type groups can be used
    in a program.

  • What type of add on can I download that will allow meto change the view of my emails in gmail? I would like to have them split view like outlook

    What type of add on can I download that will allow meto change the view of my emails in gmail? I would like to have them split view like outlook

    Dear Sara,
    I notice that you didn't reply to my questioning the this ambiguous stipulation of your services being extended to Adobe's rights in the use of my personal content or intellectual and creative property.
    When I returned to my "files" section in Adobe Reader where they were transferred to in converting them to PDF they had all been removed. Around 6 projects in progress plus notes and several creative design images in one instance (attached to a writing project). I have access to the files and I am downloading Cloud desktop interface.
    Does the interface of Reader in desktop automatically remove them from my online account, making them exclusively offline from here on OR must they be physically removed and so have they been removed by another party?
    Finally, since they are made copyright in the conversion, must future files be made uploaded to signify and account for them as made copyright by the process record in my personal account?
    Excuse my asking lots of questions. My work has been tampered with in the past and I am excited about this service I can avail of in protecting all of my work.
    Yours Sincerely,Liam Anthony Dalton BA, FA

  • Hi i have  an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

    hi i have  an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

    Only the carrier to whom the device is locked can authorize it's unlocking.  Contact the carrier to see if they offer unlocking and if you qualify.

  • What type of pen do you use to take notes on a notetaking app like enotebook

    What type of pen do you use on your ipad for a handwriting app like enotebook?

    You want what's called a stylus. There are a huge variety of styli available; just make sure that the one you get works with iPad (pretty much all of them will say they work with iPad on the packaging). I personally just grabbed the cheapest one at Staples, but you can see a bunch of styli here: http://www.theverge.com/2012/4/10/2925937/best-stylus-ipad-review

Maybe you are looking for