What type of connector needed for Russia and iPod?

I'm traveling to Russia and will need to recharge iPod once I get there. What kind of adapter/connector will I need? I have the 80GB.

If you want to connect the iMac to something that has Toslink then you would need a cable similar to this:
http://www.amazon.com/6ft-Toslink-Mini-Cable/dp/B000FMXKC8/ref=pdcp_e_1?pf_rd_p=413863501&pf_rd_s=center-41&pf_rd_t=201&pf_rd_i=B0002MQGRM&pf_rd_ m=ATVPDKIKX0DER&pf_rdr=1TDMZGX7YP22Q17RP1X3
I use one myself, they work fine.

Similar Messages

  • What type of connectors needed for optical audio out?

    Hi, looking at upgrading to an imac and I noticed on the spec it has optical audio out which would be great to go into my audio interface. What connector do I need? Is it TOSLINK type?
    Had a look at the picture of the rear but couldn't see an optical out port, only the jacks for analogue. Where does the optical come out!?
    Thanks!

    If you want to connect the iMac to something that has Toslink then you would need a cable similar to this:
    http://www.amazon.com/6ft-Toslink-Mini-Cable/dp/B000FMXKC8/ref=pdcp_e_1?pf_rd_p=413863501&pf_rd_s=center-41&pf_rd_t=201&pf_rd_i=B0002MQGRM&pf_rd_ m=ATVPDKIKX0DER&pf_rdr=1TDMZGX7YP22Q17RP1X3
    I use one myself, they work fine.

  • What licenses do I need for CUCM and CME

    Hi Experts,
    I am a newbie to Cisco IP telephony and request your guidance.
    My boss has asked me to order some 7942 phones for a CUCM based site and some 7942 phones for a CME based site.
    For CUCM 9, I understand that we need an enhanced user licenses on CUCM side.
    For the IP phone, I see 2 part numbers and am confused.
    CP-7942G - Cisco Unified IP Phone 7942G
    CP-7942G-CH1 - Cisco Unified IP Phone 7942G, for Channels, with one station user license
    What is the station user license mentioned in the part number CP-7942G-CH1 ? Is it the same as the enhanced user licenses? Assuming i am ordering enhanced user licenses, what should I order CP-7942G or CP-7942G-CH1?
    I also see a part number SW-CCM-UL-7942= ? What is this part? is it needed?
    And what do I need for CME?
    Is FL-CME-SRST-10 enough for the CME?
    What is the part number for the phones? Is it CP-7942G or CP-7942G-CCME?
    I also see another part number "SW-CCME-UL-7942="? What is it? And is it really needed?
    I heard that Cisco simplified Licensing from version 9. At least it doesn't look simple to me :( 
    Can you please help me, Experts?
    Thanks,
    Pete

    Hi without knowing your business goals, current network, etc here is some feedback.
    Depending on your design, if the sites are connected via a reliable WAN you could run the branch site as SRST and not CME, this way you get a rich feature set of the centralised call manager and simplify licenses, etc.
    Anyway, you need to size your CUCME (or SRST) correctly as each Cisco router  hardware platform has a maximum supported handsets. If you have a SIP provider new purchased ISRs now come with 10 CUBE licenses other wise you will need something else such as a VIC for dial tone.
    For instance the following is a router that comes with 25 CME 
    C2901-CME-SRST/K9        
    2901 Voice Bundle w/PVDM3-16,FL-CME-SRST-25,UC Lic,FL-CUBE10
    You can add CP-7942G-CCME which is the physical phone and license for CME
    Use CP-7942G= for the Call Manager Deployment as you will get UCL Enh or CUWL for the user side
    If you have existing routers you will need to obtain upgrade licenses for voice/CME add DSPs if needed for conferencing, media termination, etc, CUBE or voice cards and you can add the phones.
    Router handset capacities see Table 7
    http://www.cisco.com/c/en/us/products/collateral/routers/2900-series-integrated-services-routers-isr/data_sheet_c78_553896.html
    Hope this helps

  • What type of HBA needed for 220 R to connect to 3100 JBOD

    Hi
    We have a number of 3100 JBODs that are not currently being used and I am planning to use them to connect to the 220R server. What type of HBA we would need to make that happen.
    Thanks
    Srini

    Sorry, you won't be able to connect an Sun Storage Array 200 to an Intel server. The array uses a Sun sbus HBA. It is commonly known as a SOC adaptor and is only available in sbus, so the array can only be connected to Sun sbus systems, not pci systems.
    hth,
    john

  • What IOS do I need for SSH and VPN

    Greetings,
    I am not a Cisco expert but can muddle my way thru configurations. I have inherited my position from someone else who setup our VPN infrastructure long ago. Problem is that we have added a new location and I have been asked to add it to our VPN. I found a spare 2610 in the equipment closet with IOS Version 12.2(24) which is a higher version than some of the other working VPN routers in the field. I am basically using the other VPN router configs as a template but when I issue the command "crypto", it does not recognize it. Nor does it recognize the command "ip ssh". So the questions are, do I have to get an updated IOS? If this IOS is ok, do I need an add-on VPN pack? If yes to either one, how do I get it? - Thanks.
    Don

    So if I do a "show ver" on the router I am having trouble with, I see:
    IOS (tm) C2600 Software (C2600-IO3-M), Version 12.2(24), RELEASE SOFTWARE (fc1)
    On one of the working VPN routers I see:
    IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.2(15)T14, RELEASE SOFTWARE (fc4)
    So I see the K9 in the IOS version of the working router. Thanks for that part of the puzzle.
    Now my question is, how do I get that IOS?
    Don

  • What technical components are needed for integration of SAP BI and BO?

    Hello,
    What technical components are needed for integration of SAP BI and BO?

    Hi,
    you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
    In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
    Please take again a look at the following link for more detailed information (from Ingo) on this:
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
    Regards,
    Stratos

  • I have iPhoto Version 8.6, and and want to upgrade to Version. I can't find a download for Version 9.0.0.  Exactly what version do I need to download and or buy, and where do I find it.  Every version of 9 that I download tells me I need an earlier one.

    I have iPhoto Version 8.6, and and want to upgrade to Version 9. I can't find a download for Version 9.0.0.  Exactly what version do I need to download, and or buy, and where do I find it?  Every version of 9 that I download tells me I need an earlier one.

    There is no download aside from the one in the Mac App Store available to people running Mac OS X 10.6.6 and newer. The other way of getting iPhoto 9 is to purchase iLife 11 on DVD. As iLife 11 requires Mac OS X 10.6.3 or newer, it's usually best to update to 10.6.8 for free and then use the Mac App Store version.
    (61916)

  • What charging adapters do I need for Finland and England

    What charging adapters do I need for Finland and England

    Bring the power adapter that you got with your phone - you just need to get an adapter for the plug into the wall. You don't need a converter.
    Airports usually sell the adapters and stores that sell luggage often have them also.
    ~Lyssa

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • What software would I need to copy and burn DVD's

    What software would I need to copy and burn DVD's

    Copy what kind/type of DVDs?  For non-copy protected DVDs you can use Disk Utility (in the Applications folder) to make a disk image of the DVD disk and then burn it back to a disk.
    OT

  • What type of form need to be using to get Display tab on the Section Properties of my Optional Section?

    What type of form need to be  using to get Display tab on the Section Properties of my Optional Section?
    CRISTINA&amp MICROSOFT Forum

    Hi perezco,
    Are you using SharePoint?
    Please provide more information and screenshots about this issue.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • What are the table names for CRM and APO?

    hi friends,
    what are the table names for CRM and APO?
    Regards
    suneel.

    hi Suneel,
    check in crm forum
    Re: SAP-CRM Tables
    BUT051 BP Relationship: Contact Person Relationship
    Similar to BUT050 , additionally contains Contact Person’s Address data
    BUT0BK Business Partner: Bank Data & Details
    BP Number, Bank Key, Bank Country Key, Bank Account Number
    BNKA Bank Master Data
    BUT100 BP: Roles
    ADR2 Telephone Numbers (Business Address Services)
    ADR6 SMTP Numbers (Business Address Services)
    Contains Email – Id of the BP.
    ADRC Addresses (Business Address Services)
    BP’s Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
    TSAD3T Table containing the Title text against a Title No.
    COMM_PRODUCT Master Table for Product
    CRMM_BUAG Master table for Business Agreement
    CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
    Note:
    1. It doesn’t store the Business Partner
    responsible for the transaction. To
    get the Partner No, link it with
    CRM_ORDER_INDEX.
    2. This table can be used for search
    based on the Object Id(Business
    Transaction No).
    CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
    CRMC_PROC_TYPE Master table Business Transaction Type
    CRMC_PARTNER_FCT Definition of Partner Functions
    SCPRIOT Priorities for Activities with priority text.
    CRMC_PROC_TYPE_T Text for a transaction type
    CRMC_ACT_OBJ_T Objective Number and Text for Activities
    TJ30T All the status code and text
    CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
    IBIB : Installed Base/Ibase
    IBIN : Installed Base Components
    COMM_PRODUCT : Products
    CRMC_T077D : customer account groups
    CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
    CRMD_ORDERADM_H Business Transactions CRM
    CRMD_ACTIVITY_H Activity
    CRMD_OPPORT_H Opportunity
    BUTOO : Customer details
    BUT001 BP: General data II
    BUT100 BP: Roles
    BUT150 BP relationship: Attribute table (test
    different
    BUT_HIER_TREE Business Partner Group Hierarchy
    CDBC_T_PRODUCTID Mapping: Product Id
    CDBD_ORGMAN Business transaction - organizational unit -
    set
    COMC_PRODUCT General Product Settings
    COMC_R3_FIELDS Assignment of R/3 material master fields to
    CFOP
    COMM_CATEGORY Category
    COMM_CFGMAT Basic Data for Materials
    COMM_HIERARCHY Category Hierarchy
    COMP_TYPES Hierarchy Tool: Comparison Type Check
    Table
    CRMC_CPRICPROC Customer Pricing Procedures
    SMOKVBEZ15 Assignment employees to positions
    CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
    CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
    SMOFSUBTAB : Mapping & Parameters
    SMOFDSTAT : Download Monitor (R4AM1)
    SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
    SMOFOBJECT Definition of Objects for Download
    SMOFOBJPAR Parent Objects of an Object in Table
    SMOFPARSFA Middleware Parameter
    SMOFQFIND Queue Finder Table for MW-Queue finder
    SMOFTABLES Definition of Tables for Download

  • What adapter do I need for my ipod Nano 7th Generation to connect to a Sony home docking station (30 pin). I purchased the one recommended (Lightning to 30 pin adapter), but it says 'this accessory is not supported by this device)?

    Could someone please tell me the correct lead I need for an Applie Ipod 7th Generation 16GB for a Sony docking station. I bought a Lightning to 30 pin adaptor that fits the dock but not the ipod (this was recommended to me by someone from the Apple shop believe it or not). I need one that will fit the ipod and then slot into the 30 pin dock. The dock pulls out and my old ipod (5th Generation) just slotted straight in, but this slot obviously doesn't fit. It would really help if someone can recommend what I need to use or even if there is one that just slots in or whether I need some sort of cable and can't use the docking station. I've had a lock at the Apple store but just keep getting confused about what does what and can't seem to see anything unless I need an additional cable to slot into the 30 pin adapter I already have?
    HELP - CONFUSED.COM!

    If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
    This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
    Is this what you bought?
    You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

  • What drivers do I need for a dell V515w AIO printer on my MacBook Pro OX S 10.7.2

    What drivers do I need for a Dell V515w all in one printer for my MacBook Pro OS X 10.7.2 ????

    Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
    If driver+software then that's a problem as they likely won't write one for OS X.
    If drivers you can install these open source one and hopefully it might work,  Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
    http://sourceforge.net/projects/gimp-print/files/

  • What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

    What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

    All you need is an Ethernet cable.
    Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately.

Maybe you are looking for

  • Can no longer connect to WiFi after IOS 7 update

    I own a small hotel. After updating to the new IOS, no one can connect to the WiFi network on their iPads or iPhones. Help!

  • Dynamic column change in Alv

    Hello friends,                    Can any1 pls tell me if there is a function module available which can be used for dynamic column change in ALV.                   Pls also elaborate how to use it.....

  • Drop down Menu, Option,value

    Folks, Is there a way I can get the Option that has been selected in the page. I know that we can get optionValue by request.getParameter("dropDown"); I want to able to capture the option also i.e if the user selects <option value="1">first</optiont>

  • JRun and classpath

    All, I am going to run my applicaiton on JRun server and I need to use apache xml parser. Right now when I run my code, it got following error: javax.servlet.ServletException: org.w3c.dom.Node: method getNamespaceURI()Ljava/lang/String; not found jav

  • Http wrong client redirect

    Hello guys, i´m facing a problem when i start solman_setup transaction in client 001. it opens a new windows but everytime with client 100 by default(as you can see in pictures bellow), well i don't have client 100 on my machine, but i suppose that h