What type of hard drive replacement should i use to replace the hard drive in my first generation mac min 2005 model a 1103?

what type of hard drive replacement should I use to replace the hard drive on my first generation mac mini model a 1103?   G4 1.25 mhz 40 gb hd 1 gb. mem.

You'll need a 2.5" parallel ATA interface hard drive. Most are 5400RPM, forget 7200RPM drives and slower 4200rpm drives.  You don't want a serial ATA (SATA) drive, as that has a different connector and won't work.
One source I've used for drives is Newegg, and their parallel ATA hard drives are at http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007605%2060000344 2&IsNodeId=1&name=IDE%20Ultra%20ATA100%20%2f%20ATA-6 .  Newegg also has many user comments about the drives. Other sources are OWC at http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ (Click on ATA on the left) . Look for at least a 3 year warranty. 

Similar Messages

  • What is the best hard drive replacement for a first generation mac mini 1.25 mhz 40gb hard drive 1gb ram year 2005

    What is the best hard drive replacement for a first generation mac mini 1.25  40 gb hard drive 1 gb ram year 2005?

    You posted this same question 24 hours ago, which has a reply.  Did you have questions on that answer or did you want further discussion? You could reply to that thread, there's no need to start a new thread.

  • Its my first time buying apple product from online, I'm from Sarawak, Malaysia, i would like to know what type of post/delivery service will be used to deliver the product i ordered to my house address.

    HI, its my first time buying apple product from online, I'm from Sarawak, Malaysia, i would like to know what type of post/delivery service will be used to deliver the product i ordered to my house address.

    iPhones, iPads, iPods are dispatched from China.  Apple accessories are dispatched from Singapore.  The carrier is FedEx.
    Online purchases could be delivered to office addresses or home addresses.  Track your item through the email sent by Apple.  If necessary,  you could change the delivery address to your office one.

  • I have one HDMI port on my television that is currently used for my hard drive/free view box.  What kind of adaptor can I buy so I can have the hard drive and my apple tv device plugged into the same HDMI PORT?

    I have one HDMI port on my television that is currently used for my hard drive/free view box.  What kind of adaptor can I buy so I can have the hard drive and my apple tv device plugged into the same HDMI PORT? Is it a switch or a splitter?  And where is it best to buy one?  Thanks!

    Welcome to the Apple Community.
    You need an HDMI switch.

  • I purchased the multi-user iworks and recently had to replace my white imac's hard drive but didn't pay to fix the CD drive.  My iworks does not have a serial number on the box and now that my CD drive isn't working how can I reinstall this software?

    I purchased the multi-user iworks (yes back when it was new, 2009 or 2010 and recently had to replace my white imac's hard drive (but didn't pay to fix the CD drive).  My iworks does not have a serial number on the box and now that my CD drive isn't working how can I reinstall this software?

    Buy or borrow an external USB optical drive.
    See the confirmation email or covering letter to obtain the serial number. If you have lost it, contact the supplier.

  • What type of out put parameter should i have to pass here?

    Hi all,
               I'm working on a custom function module. In that i have to call a standard function module "SAPWL_READ_STATISTIC_FILES".
    This standard FM is returning the values in changing parameter "ALL_STATS" of type "SAPWL_ALLSTATS". SAPWL_ALLSTATS is a structure in a pool structure "sapwl".
    My problem is when i'm testing the standard FM with some input parameters its throughing some values into changing parameter "ALL_STATS", but in my custom FM for the same standard FM i'm passing the same values its not throughing any values into that changing parameter "ALL_STATS".
    So can anybody check this standard FM and suggest me how to declare the output parameter type and pass? Its a pool structure there i'm getting problem to define it. Help me out please.
    Thanks & Regards
    Naidu

    Hello Naidu
    Using the sample report ZUS_SDN_READ_STATISTICAL_FILES I can fetch a couple of records from the system (ERP 6.0).
    If your selection does not work within your custom function module then perhaps there is some conversion problem with the input data (keep in mind that the SAP-GUI takes care of all conversions, e.g. a date '10.11.2008' is automatically converted into '20081110').
    *& Report  ZUS_SDN_READ_STATISTICAL_FILES
    *& Thread: What type of out put parameter should i have to pass here?
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1119462"></a>
    REPORT  zus_sdn_read_statistical_files.
    TYPE-POOLS: sapwl.
    DATA: gt_stats    TYPE STANDARD TABLE OF sapwl_statrec.
    DATA: gd_msg      TYPE bapi_msg.
    START-OF-SELECTION.
      CALL FUNCTION 'SAPWL_READ_STATISTIC_FILES'
        EXPORTING
          read_client                 = syst-mandt
    *     READ_TIME                   = '001000'
    *     READ_TIME_DELTA             = '000200'
    *     READ_EXCLUDE_USERNAME       =
    *     READ_START_DATE             = SY-DATUM
    *     READ_START_TIME             = ' '
    *     READ_USERNAME               =
    *     READ_WORKPROCESS            = 'FFFF'
    *     STATISTIC_FILE              = ' '
    *     AS_STATISTIC_FILE           = ' '
    *     NO_BUFFER_FLUSH             = ' '
    *     WAIT_FACTOR                 = 150
    *     INCLUDE_APPL_STAT           = ' '
    *   IMPORTING
    *     PROBLEMS                    =
    *     TOTAL_RECS_READ             =
    *   TABLES
    *     PROTOCOL                    =
    *     RFC_RETURNS                 =
    *     SERVER_LIST                 =
        CHANGING
          all_stats                   = gt_stats.
      DESCRIBE TABLE gt_stats.
      WRITE syst-tfill TO gd_msg NO-ZERO.
      CONDENSE gd_msg NO-GAPS.
      CONCATENATE gd_msg 'Records found' INTO gd_msg
        SEPARATED BY space.
      MESSAGE gd_msg TYPE 'I'.
    END-OF-SELECTION.
    Regards
      Uwe

  • The internal hard drive on my early 2009 24" iMac is nearly full.  How do I add an external drive so that it functions just like the internal drive on the iMac?

    The internal hard drive on my early 2009 24" iMac is nearly full.  I have already worked to free as much space on the HD as possible.  How do I add an external HD and have the iMac read it as though it was part of the internal HD.  I know about external HD for additional storage and I do have an external HD, but, it is so much easier to search the drive when it is internal than having to perform a search on the internal drive and then a search on the external drives.  And, it is easier to save files to an internal drive so that I don't have to decide which external drive to use to save files.  In other words, I want to add an external HD and have it function as though I had purchased a larger internal HD.

    That is simply not possible. Every drive is a separate device. It cannot be used to extend an internal drive as though you had a seamlessly larger drive.
    What you can do is to create a striped RAID array using the internal drive and an external drive. However, doing this will erase the internal drive and you will lose everything on the internal drive. Furthermore, installing Lion or Mountain Lion becomes a bit of a problem because you cannot create a Recovery HD on a RAID and this tends to make the installer choke. However, you can clone an existing Lion or Mountain Lion system to the RAID and designate the RAID as a startup volume.
    I would not recommend the RAID solution, personally, but there are many who do. I prefer the basic solution of spending the money on a larger internal hard drive instead of an external hard drive.
    RAID Basics
    For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs.  Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
    RAID Tutorial;
    RAID Array and Server: Hardware and Service Comparison.
    Hardware or Software RAID?
    RAID Hardware Vs RAID Software - What is your best option?
    RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
    RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
    Pros and cons. Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
    For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?

  • Get info saying only 108 gb used up on the hard drive, but it's at least 3 times that

    Just wondering what the explanation for this could be. When I select the HD icon and choose "get info" in the file menu, it says that the HD file size is 108 gb, with 642 gb available. There is at least (on a rough count) 300 gb used up on the hard drive, with music, photos, movies, documents etc. They haven't been catastrophically erased or anything like that, they're all still there. So why is my hard drive saying only 108 gb used?
    Tom

    Have you compared this with what System Information>Hardware>Serial-ATA and what Disk Utility shows?
    You might download OmniDiskSweeper from the Internet (free) and open it.  This will show all of your files and the respective sizes.
    Is your drive partitioned?
    I assume you are referencing this dis[play:
    Ciao.

  • I get the question mark in the folder on start up, but if i connect the same hard drive via usb it works fine is the hard drive faulty?

    but if i connect the same hard drive via usb it works fine is the hard drive faulty?

    It sort of sounds like a startup disk issue.  Have you tried starting up holding down the "Option" key?  This should generally give you the option of which drive you want to boot from after a few seconds.  Sometimes, especially if you had previously booted from an external drive (and it sounds as if you have) they system wants to continue booting from that drive.  If it can't find it, it just sort of hangs there.  Try holding down the "Option" key and see if your internal drive is shown as an option.  If it is, select it.  If you manage to get into the OS, go to System Preferences / Startup Disk and select the correct drive (even if there is only one drive shown, you should still select it).

  • I am trying to put the files from my mac onto a seagate backup plus slim portable drive but as soon as I plug the hard drive into my laptop, a notification comes up saying that there was an error

    I am trying to put the files from my mac onto a seagate backup plus slim portable drive but as soon as I plug the hard drive into my laptop, a notification comes up saying that there was an error

    carriinna wrote:
    I am trying to put the files from my mac onto a seagate backup plus slim portable drive but as soon as I plug the hard drive into my laptop, a notification comes up saying that there was an error
    What kind of error.  What does it say?
    Ciao.

  • TS1338 I have 4 Trojan Horse viruses on my external drive I use for Time Machine.  My MacBook Pro hard drive is clean.  I have eased the external drive 3 times using Disk Utility and it still has the 4 Trojan Horse viruses. How do I get rid of them. Wayne

    I have 4 Trojan Horse viruses on my external drive I use for Time Machine.  My MacBook Pro hard drive is clean.  I have eased the external drive 3 times using Disk Utility and it still has the 4 Trojan Horse viruses. How do I get rid of them. I am using 10.8.3  Wayne

    ksu62 wrote:
    The infection names are:  classload.jar-719ef6a5.zip
                                              classload.jar-5db452le31.zip
                                              ar3.jar-6ce3b2f-45l483f.zip
                                              classload.jar-lef99412-63bsd3fl.zip
    Those look alot like file names and not infection names. I don't find any reference to anything like that on Norton or VirusTotal. Since you said these were Trojans, I would expect to see "Trojan" as part of the infection name.
    ".jar" files are executable Java applets. The random alpha-numerics would seem to indicate a cache file, likely from a browser with Java enabled. And we all know what ".zip" means.
    Worst case is that you had Java enabled in a browser and were infected by one of the late variants of the Flashback Trojan over a year ago or one of a couple of other attacks using the same vulnerability but targetted against a small number of political sympathizers. Much more probable is that thes were Windows only Trojans. Hopefully you have a fully up-to-date OS X, including Java, and have disabled Java in all your browsers by now.

  • I have an existing mini mac and 4 tb external drive. My iTunes library exists on the external drive under /itunes... I have purchased a new mini mac and I want to leave the library where it is but move to new mini mac.. what do i need to do ?

    I have an existing mini mac and 4 tb external drive.
    My iTunes library exists on the external drive under /itunes...
    I have purchased a new mini mac and I want to leave the library where it is on the external drive but move to new mini mac and have it show as it did on the old mini mac..
    what do i need to do ?
    I have found multitude of articles about moving itunes to external drive or other similar things but I don't want to move itunes from the external drive, just change mini mac machines and have everything in itunes the same..
    Thanks

    I had already tried that one and got this...
    below is screen shot of what is on the new mac mini
    and what is on the external drive now connected to the new mac mini..
    There are no media files on the mac mini just the library files and on external just media files..
    Do I need to copy anything over from the old mac mini ? xml files ? .. the itunes folder on old mini is about 840mb in size which looks to have artwork ect ? .. I am fairly computer literate, but this one has me stumped.. ?
    thanks for help

  • HT5219 I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

    I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

    No. Your iMac only has DVI video connection. You would need an iMac with Thunderbolt.

  • HT4236 I've run out of room on my hard drive. I bought an external drive and exported all my albums to the external drive then deleted the albums from iPhoto. I want to sync both from my ext drive and new albums in iPhoto. No dice. Help!

    I've run out of room on my hard drive. I bought an external drive and exported all my albums to the external drive then deleted the albums from iPhoto. I want to sync both from my ext drive and new albums in iPhoto. My photos on the devices get wiped out when I sync to iPhoto since I deleted all the albums. But when I sync to my hard drive (where I maintained the album structure) the photos are copied to my iPad but lose all the hierarchy and folder structure. Now I have to scroll through thousands of photos to try to find the one I'm looking for. Before I sync any more devices I want to know the following: 1) can I restore the album structure on my iPad by using the photo cache? 2) is there a way to sync both new iPhoto albums AND pictures in the folders in my hard drive? And 3) how can I keep the photo hierarchy structure from my hard drive intact on my devices?

    TigerMom28 wrote:
    I've run out of room on my hard drive. I bought an external drive and exported all my albums to the external drive then deleted the albums from iPhoto.
    Don't do that.
    Copy /Photos/Photo library/ to the external.
    Hold Option and launch iPhoto.
    Select Choose library and select the Photo library you copied to the external.

  • Is it possible to boot windows solely from an external hard drive so that it does not affect the internal drive

    Is it possible to boot windows solely from an external hard drive so that it does not affect the internal drive. I already know that you can partition the internal hard drive to do the very same. Idon't want to use any of the internal space to run windows so I'm asking if it is possible to use a flash drive or external drive through USB to run windows when it is plugged in.

    Read https://discussions.apple.com/thread/5043762?start=0&tstart=0 to discover you can't do it.
    Allan

Maybe you are looking for