What type of HBA needed for 220 R to connect to 3100 JBOD

Hi
We have a number of 3100 JBODs that are not currently being used and I am planning to use them to connect to the 220R server. What type of HBA we would need to make that happen.
Thanks
Srini

Sorry, you won't be able to connect an Sun Storage Array 200 to an Intel server. The array uses a Sun sbus HBA. It is commonly known as a SOC adaptor and is only available in sbus, so the array can only be connected to Sun sbus systems, not pci systems.
hth,
john

Similar Messages

  • What type of connectors needed for optical audio out?

    Hi, looking at upgrading to an imac and I noticed on the spec it has optical audio out which would be great to go into my audio interface. What connector do I need? Is it TOSLINK type?
    Had a look at the picture of the rear but couldn't see an optical out port, only the jacks for analogue. Where does the optical come out!?
    Thanks!

    If you want to connect the iMac to something that has Toslink then you would need a cable similar to this:
    http://www.amazon.com/6ft-Toslink-Mini-Cable/dp/B000FMXKC8/ref=pdcp_e_1?pf_rd_p=413863501&pf_rd_s=center-41&pf_rd_t=201&pf_rd_i=B0002MQGRM&pf_rd_ m=ATVPDKIKX0DER&pf_rdr=1TDMZGX7YP22Q17RP1X3
    I use one myself, they work fine.

  • What type of connector needed for Russia and iPod?

    I'm traveling to Russia and will need to recharge iPod once I get there. What kind of adapter/connector will I need? I have the 80GB.

    If you want to connect the iMac to something that has Toslink then you would need a cable similar to this:
    http://www.amazon.com/6ft-Toslink-Mini-Cable/dp/B000FMXKC8/ref=pdcp_e_1?pf_rd_p=413863501&pf_rd_s=center-41&pf_rd_t=201&pf_rd_i=B0002MQGRM&pf_rd_ m=ATVPDKIKX0DER&pf_rdr=1TDMZGX7YP22Q17RP1X3
    I use one myself, they work fine.

  • What type of HBA to connect to a stor. arr 200??

    Hello,
    we got a SPARCstorage Array Model 200.
    I want to connect my Intel server (via FFDI) to this controller.
    But what type of HBA am I to look for??
    wkr: Wilhelm Pieper

    Sorry, you won't be able to connect an Sun Storage Array 200 to an Intel server. The array uses a Sun sbus HBA. It is commonly known as a SOC adaptor and is only available in sbus, so the array can only be connected to Sun sbus systems, not pci systems.
    hth,
    john

  • What type of form need to be using to get Display tab on the Section Properties of my Optional Section?

    What type of form need to be  using to get Display tab on the Section Properties of my Optional Section?
    CRISTINA&amp MICROSOFT Forum

    Hi perezco,
    Are you using SharePoint?
    Please provide more information and screenshots about this issue.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • What technical components are needed for integration of SAP BI and BO?

    Hello,
    What technical components are needed for integration of SAP BI and BO?

    Hi,
    you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
    In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
    Please take again a look at the following link for more detailed information (from Ingo) on this:
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
    Regards,
    Stratos

  • What drivers do I need for a dell V515w AIO printer on my MacBook Pro OX S 10.7.2

    What drivers do I need for a Dell V515w all in one printer for my MacBook Pro OS X 10.7.2 ????

    Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
    If driver+software then that's a problem as they likely won't write one for OS X.
    If drivers you can install these open source one and hopefully it might work,  Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
    http://sourceforge.net/projects/gimp-print/files/

  • What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

    What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

    All you need is an Ethernet cable.
    Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately.

  • What adapter do i need for my macbook pro for a presentation

    what adapter do i need for my macbook pro for a presentation

    What model/Year MBP do you have and what are you connecting it to?
    Ciao.

  • What cables do I need for Apple TV streaming from my iPad to my tv

    What cables do I need for Apple TV, streaming fom my iPad to a HD tv?

    if you have an Apple TV it's don over wifi as in wireless so no cable would be required apart from the hdmi cable the Apple TV connects to the tv with

  • What charger do I need for my 2008 macbook pro 15"

    what charger do I need for my 2008 macbook pro 15"?

    This one:
    http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro
    Ciao.

  • What app do i need for my phone printer officejet pro 8500a

    what app do i need for my phone printer officejet pro 8500a

    Hi tiys,
    If you have a Android phone you can download HP home and biz app from the andriod market.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • What app do i need for my epson 600 printer to work with my ipad

    what app do i need for my epson 600 printer to work with my ipad

    Hi,
    You are asking at a wrong forum, anyway firstly please check to see is your printer in this list ? 
    http://support.apple.com/kb/ht4356
    If Yes, please follow this checklist and fix:
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    If No, check with Epson
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What User authorization objects needed for connecting to SAP from xMII?

    We eneter a SAP user and password for connecting to SAP from xMII to retrieve the metadata of the incoming IDocs.
    When I specify a user with SAP_ALL user profiles, the IDocs are received properly in xMII. If I specify a user with privileges to run only certain transactions, IDocs are not received in xMII.
    What user authorization objects are needed for this user to connect to SAP from xMII?
    Thanks,
    Sara

    Sam,
    I turned on the SAP System trace for this user and figured out the following auth. objects are required for receiving IDocs in xMII:
    C_TCLA_BKA
    S_RFC
    S_CTS_ADMI
    B_ALE_MAST
    S_IDOCDEFT
    The following auth. object is required for making JCO call to SAP from xMII:
    C_AFRU_AWK
    Thanks,
    Sara

  • I have Safari 3.2.3.  What version do I need for Mac OS X 10.6.8?

    I have Safari 3.2.3.  What version do I need for Mac OS X 10.6.8?

    Go here for a much more up-to-date Safari: http://support.apple.com/kb/DL1569

Maybe you are looking for