What type of HBA to connect to a stor. arr 200??

Hello,
we got a SPARCstorage Array Model 200.
I want to connect my Intel server (via FFDI) to this controller.
But what type of HBA am I to look for??
wkr: Wilhelm Pieper

Sorry, you won't be able to connect an Sun Storage Array 200 to an Intel server. The array uses a Sun sbus HBA. It is commonly known as a SOC adaptor and is only available in sbus, so the array can only be connected to Sun sbus systems, not pci systems.
hth,
john

Similar Messages

  • What type of HBA needed for 220 R to connect to 3100 JBOD

    Hi
    We have a number of 3100 JBODs that are not currently being used and I am planning to use them to connect to the 220R server. What type of HBA we would need to make that happen.
    Thanks
    Srini

    Sorry, you won't be able to connect an Sun Storage Array 200 to an Intel server. The array uses a Sun sbus HBA. It is commonly known as a SOC adaptor and is only available in sbus, so the array can only be connected to Sun sbus systems, not pci systems.
    hth,
    john

  • [WRT54G] What type of cable to connect router to cable-modem?

    Hi,
    What type of cable do I have to use to connect a WRT54G router to a cable-modem, straight UTP or cross UTP?

    Normally you would use the standard (straight through) ethernet patch cable.

  • What type of collection can I use to store a word and a string as it's valu

    I am writing a grammar checking application. What kind of collection can I use to store the word and the type of word as it's value.
    e.g.(book = noun) (clean = adjetive) (of = predicate) (took = verb)
    or should I use a collection as they type and add the words in each different collection?
    you advice is greatly appreciated.
    thanks,
    steve

    class "Contradiction" contains two variables, the String and what Type was assumed
    Algorithm:
    Parse out next word
    Find all possible meanings/types of word
    Assume first meaning is true, continue (think [push])
    If clause, call clauseParse all over again (think [push])
    Return parsed structure when done, (think [pop])
    If Contradiction rises to top of sentence, there is a grammer problem. Now switch into grammer correction mode.
    If a word can be interpreted two different ways, don't worry about it as long as it's right either way.
    To test for similar-sounding words, use something like SoundX
    _Tim                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Lightroom launches automatically no matter what type of device is connected.

    I have the PC version of LightRoom running on Windows XPSP2. When any USB
    device is connected to the computer (read: Printer, Video Camera, Sound
    Recorder, Ipod, PocketPC) Light Room Launches.
    I have selected "Do Nothing" on the Preferences Dialog to indicate behavior
    when a memory card is inserted but it doesn't affect this.
    Any suggestions on how to fix this?
    Thanks,
    Rikk

    The FAQ is a Subforum at
    Lightroom FAQ and was to remind you to read the forem before posting. A search would bring up your issue.
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • HT5219 I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

    I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

    No. Your iMac only has DVI video connection. You would need an iMac with Thunderbolt.

  • For the new airport extreme what type of cable do I need to connect to my cable modem. Is Cat5 OK or will that bottle neck things?

    For the new airport extreme what type of cable do I need to connect to my cable modem. Is Cat5 OK or will that bottle neck things?

    Assuming that your cable modem has Gigabit Ethernet ports (possible, but it probably does not) Cat 5e or Cct 6 would do the job that you need.
    If the cable modem is using a 10/100 Mbps port, then Cat5 will be OK.

  • What type of cabel is suitable for hdmi connection for my 2011 macbook pro 15'

    hi, do u know what type of cable should I buy to connect HDMI cable to my macbook pro 15' 2011? 

    Something like this one that includes audio: http://eshop.macsales.com/item/Newer+Technology/CBLMDPHDMI/

  • HT201180 What type of Fire Wire cable to use to connect MacBook Pro 2009 to tape-based Sony TRV720 camcorder

    What type of Fire Wire cable to use to connect MacBook Pro 2009 to tape-based Sony TRV720 camcorder

    USB is the slowest. Firewire is faster. eSata is the fastest (and will be superceded by Thunderbolt).  The old Fire was 4 pin (Firewire 400 and is essentially obsolete), new is 9 pin, Firewire 800.  All of the will transmit data, simply a different speeds.
    For eSata connectivity, you MBP must have an express card slot (and the appropriate eSata connection card) and you external enclosure must have an eSata input.  eSata cables will only transmit data, therefor it will require power by Firewire or USB cables.
    Ciao.

  • Surplusmeter - what type of connection do I have?

    I have a high-speed internet "stick", it plugs into my USB port. My service provider (telus) has a 5GB monthly cap for data transfer. I've downloaded a free program called SurplusMeter, that monitors internet usage.
    I don't have a router or anything else, just one computer.
    I'm not sure what setting I should use in SurplusMeter where it asks what type of connection I have. The options are "PPP modem, ethernet port, airport, network card, adaptor"
    what should I have it set to? any help would be much appreciated!

    When in doubt, try them and see. Maybe start with adapter? Download a small file and see if it records the usage.

  • What type of connection should i use?

    Not sure if i should i post this here or web tier api's, but here goes...
    I have a servlet in a tomcat webserver and i want it pass information between it and a standard j2se application running on the same machine.
    I'm not sure what type of connection i should use?
    DataStream?
    Socket?
    HttpConnection?
    Any other recommended method?
    Or if i need a network connection like that at all?
    Thanks for the help

    The most straightforward method would be to use rmi since both are running java. that is the least amount of work on your part in terms of managing connections and data marshalling. any of the other solutions add more burdens in one or both of these areas.

  • HT4259 I am trying to connect airport express to extend the range of my airport tower. What type of cords do I need to connect the airport express to a hardwired outlet in the wall of a bedroom?

    I am trying to connect my airport express to extend the range of my network to a bedroom that is hard wired for internet. What type of cord/cords do I need to do that?

    You can connect the AirPort Express to the wall port in the bedroom for the setup.....but first....if you have not already done so.....it would be a great idea to make sure that the connection in the bedroom is working correctly.
    To do that, turn off the wireless on a laptop and connect the laptop directly to the wall port in the bedroom using an Ethernet cable. Make sure that the laptop can get a good Internet connection that way.  If it can, this tells you that the cabling is working correctly, so the Express will work well when you connect it up.
    If you don't have a laptop with an Ethernet port, then we'll have to assume that the folks that pulled the cables and installed the jacks tested things as part of the installation.
    When you are ready to install the Express, you can use an iPhone or iPad if you have one handy for the setup.

  • What  type of plug in do I need to use between weblogic and tomcat please

    Hi,
    Can anybody please tell me what type of plugin do I need to install to communicate between Tomcat4.0 and weblogic6.1 sp2.actually I wanted to use a connection pool from my servlet on my local tomact where connection pool is created on remote weblogic server.........?
    I have no idea what to do. I tried including the weblogic.jar in my local classpath where my tomcat is sitting. This didnot work . I got the following error......
    I want to know is it possible.............?
    javax.naming.NoInitialContextException: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory [Root exception is java.lang.ClassNotFoundException: weblogic.jndi.WLInitialContextFactory]
    Your response is very inportant......
    Thnaks

    Thanks a lot for your rely....
    then how could I use the remote connection pool in my
    local Tomcat server.....?If thats is not possible then
    what if organisation have two webservers...? you mean
    thay have to create connection pool in two servers
    rather on one server and use it every where.....?
    Still depends on what you are trying to achieve.
    Most clustered systesm use a connections on each server. They sync the data retrieved between servers, not the connections themselves.
    If you simply one a single connection point then you need to use a driver that proxies requests to and from the real connection point.
    RmiJdbc is free at http://www.objectweb.org/.
    There are commercial drivers available, search at http://industry.java.sun.com/products/jdbc/drivers, which provide an enterprise layer for database access. They are probably more robust and feature rich than the above one.

  • What type of connector do I need from my Macbook Pro Retina laptop for sound out to audio speakers with regular audio input jacks?

    I am wanting to use regular audio speakers with traditional audio input jacks to serve as output speakers on my Macbook Pro Retina display laptop. What type of cable would I need to connect?

    http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP

  • What type of soundcard ?

    Dear all,
    bit of a silly question, but can someone tell me how to connect 5 speakers to my laptop ?
    I bought the Logitec X 530 speakers ( total of 5 ).  I am not sure , but the Logitec manual says that with a
    2 channel soundcard i wont hear the sound from the rear speakers.  I am not sure what type of soundcard
    my machine has.   Was this a waste of money then ? the subwoofer and two speakers work fine.
    Would be nice to have the other three speakers working as well.   any special devices need for this ?
    And where would i find out what soundcard my laptop has ?
    laptop is HP G61-410SA Tango.
    thanks for your help and best regards from
    kentishtown

    mreibsamen wrote:
    It's phantom powered with a little "in use" light. Got it on ebay for dirt cheap. I'm using it to power my behringer C-1U usb mic, and my sony dynamic stereo headphones. both appear to be recognized and have power to them yet still having the crackling problem
    In that case, I'd definitely, definitely get an external power supply for it. You're running this with a notebook, and just because the USB spec says you can take 500mA out of a USB port doesn't mean that manufacturers are obliged to provide that much - and in the case of anything portable, they invariably don't. And if you are running Sony dynamic headphones, you are probably using up pretty much all of the power that the laptop can provide. Not only that, but the power supplied to run the device this way is subject to an electronic 'negotiation' with the PC - and the results of this can vary dynamically; another source of weird things happening.
    It's pretty common to find that the majority of USB hub problems evaporate when a sensible power source is applied!

Maybe you are looking for

  • How do I actually use a master password?

    My home folder is protected with file vault and so I have a master password set. If ever I should forget my user password how would I use the master password to get in to my Mac? thx

  • Bex Analyzer error in Excel 2007

    Hi all, i am in excel 2007 and when i open a query in analyzer then i got a ciritical pop up,,sayin program needs to be terminated. do anyone have any solution?

  • InDesgin/InCopy xml workflow

    Hi, How to work with xml in indesign for incopy workflow. Its works on non xml workflow. In xml workflow i think, some structured issues available. Please clarify this workflow (if possible with sample).

  • Boost BT mobile at home?

    I've just switched to BT mobile as the price is good no the coverage checker indicated that reception was excellent for 2 and 3G. Unfortunately at home the signal is poor, generally 1 bar of signal and calls dropping out before being connected. I swi

  • How to clean install Maverick

    How to clean install maveraick back from Yosemite.