What type of line card can be inserted into 7606 or 6509?

what type of line card can be inserted into 7606 or 6509? Please, differentiate them! Thanks

Hi,
It depend on what IOS version you are running. Older IOS version will not support newer line card. Is there any line card you want to insert between the 7600 and 6500?
Regards,
jerry

Similar Messages

  • What type of memory cards can be used on hp6510

    what memory cards are used in hp 6510

    Hi,
    Thank you for posting,
    The HP Photosmart Supports the following memory cards.
    Memory Stick Duo,
    Secure Digital/MultimediaCard
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • What type of wireless card should I buy?

    Does anyone have suggestions on what type of wlan card I should buy for my MSI K8T Neo FSR Board? I currently have a D-Link DWL-G520, and it crashes the system, so I need something new. Thanks!

    Quote from: bassmadrigal on 12-May-05, 04:09:05
    I always seem to have problems with internal PCI cards from D-Link Netgear Linksys (the list goes on), but I have never ran into a problem with external cards. I currently use a linksys and my friend uses a D-Link. One benefit of going external is, obviously you can move it from computer to computer without a problem, also if you are getting a bad signal you can move it to a different spot. I have always felt that having a card in the back of your computer with all the electrical interference caused by the computer is something I don't want to deal with.
    Good Luck
    Jeremy
    It depends...
    USB adapters can sometimes freeze up. I've had this problem with a Belkin 802.11b, and Motorola 802.11g adapters. I still think they are great because you can move the adapter around, and far from the PC, but PCI cards would be the most stable.
    I think the ideal situation is a a/b/g PCMCIA card with a desktop pci adapter, so you can remove it for use with a laptop too. Also get a decent external antenna, and you'll want for nothing.
    At least until 802.11n comes along....

  • What type of video card should I upgrade to?

    I want to upgrade to Bryce 6.0... it has new features I want, plus, it is designed to fully utilize the dual processors in my G5.
    But it requires a 128MB video card with OpenGL capability. My G5 came with (and still has) a 64MB GeForce FX 5200.
    1) So what type of video card should I get?
    And I'm also concerned about the heat (and, to a lesser degree, the noise from a fan)... I've been checking out the ATI website, and a lot of their video cards require a 300 watt power supply.
    2) Have any of you experienced problems with with heat from a video card? My loft is fine this time of year, but it gets a little warm in the summer months, even with the breezes off of Lake Michigan.
    Also, are there any other benefit to having a high-end video card?
    I am open to all suggestions, criticisms, tips, recommendations and ideas. I have no brand loyalty when it comes to video cards. Just don't try talking me out of upgrading to Bryce 6.0.
    Thanks!
    Power Mac G5 Dual 1.8GHz   Mac OS X (10.4.8)   2GB RAM, Barracuda HD

    If you don't need anyting high-end, check into the ATI RADEON 9600 XT with 128MB DDR SDRAM. ATI's 800XT is a very popular card for AGP-equipped PM G5s like yours, but more costly.

  • How do I find out what type of video card I have?

    I just want to know what to do to know what type of video card I have. What steps do I take to find out?

    Go to "About This Mac" under the Apple menu. Select "More Info..." and then "System Report...". Look under Hardware>Graphics/Displays/ Your video card(s) will show up at the top.
    Clinton

  • In Dialog server, what type of work process can I use.

    Dear all,
      In Dialog server, what type of work process can I use,
    Can I use all types like dialog, BTC, U1 and U2 , spool, and enque
    regards,
    satish

    Hi,
    you can use dialog, BTC, U1 , U2 and spool
    enque must be on only central instance becoz there is no message server on dialog instance
    regards,
    kaushal

  • What type of WS Security can be used for RPC Webservice?

    Hi all,
    I have 2 issues.
    1)I was given a RPC webservice that I have to consume and expose it has WSI Webservice. I am unable to do the transformation from RPC webservice to WSI webservice in Eclipse.Are there any documents that helps me in transforming the RCU to WSI.
    2)Anyone know What type of WS-Security can be applied for a RCU webservice in OSB?If there is one,Can u please share the documents.
    Thanks,
    Krishna

    Hi Krishna,
    Have a look at this:
    http://docs.oracle.com/cd/E17904_01/doc.1111/e15866/transports.htm#BEIFHBAI
    What's an RCU web service?
    Cheers,
    Vlad
    Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question. If you think this is helpful, please consider giving points.

  • What type of email accounts can be used with MacPro?

    What type of email accounts can be used with MacPro?

    LJR01 wrote:
    The apple consultant at the store rattled off a list of emails that I can use, but I didn't write it down.  He said the reason I can't set up my email account is because yahoo is not supported because of pop-up ads.
    Well the consultant was wrong. Check out yahoo for yourself if that's what you want to use. http://www.yahoo.com/

  • What types of video files can be run on Adobe Premiere Pro CC 2014?

    What types of video files can be run n Adobe Premiere Pro CC 2014. Please answer this fast. I need it ASAP.

    Adobe Premiere Pro Help | Supported file formats

  • What type of add on can I download that will allow meto change the view of my emails in gmail? I would like to have them split view like outlook

    What type of add on can I download that will allow meto change the view of my emails in gmail? I would like to have them split view like outlook

    Dear Sara,
    I notice that you didn't reply to my questioning the this ambiguous stipulation of your services being extended to Adobe's rights in the use of my personal content or intellectual and creative property.
    When I returned to my "files" section in Adobe Reader where they were transferred to in converting them to PDF they had all been removed. Around 6 projects in progress plus notes and several creative design images in one instance (attached to a writing project). I have access to the files and I am downloading Cloud desktop interface.
    Does the interface of Reader in desktop automatically remove them from my online account, making them exclusively offline from here on OR must they be physically removed and so have they been removed by another party?
    Finally, since they are made copyright in the conversion, must future files be made uploaded to signify and account for them as made copyright by the process record in my personal account?
    Excuse my asking lots of questions. My work has been tampered with in the past and I am excited about this service I can avail of in protecting all of my work.
    Yours Sincerely,Liam Anthony Dalton BA, FA

  • What type of memory card should I purchase for my iMac (late 2009)?

    I'd like to increase the memory on my computer, as I'm running some pretty hefty programs (Parallels with Quicken, CS6, and some architecture drafting softwares) that really bog down the processing response time. I believe that I have two slots in the back of my machine, to add memory to, but have no clue what to purchase.  I'd love to know what type of memory card I should purchase (or how to find out), in addition to the best place to buy it.
    Thank you for your feedback!
    Specs:
    iMac: 27-inch, late 2009
    Running: OSX Mountain Lion (10.8)
    Processor: 3.06GHZ Intel Core 2 Duo
    Memory (existing): 4GB 1067MHz DDR3
    Graphics: ATI Radeon HD 4670 256 MB

    Great idea! Thanks.

  • What type of movie files can I put on my Ipod Video?

    What type of movie files can I put on my Ipod Video?

    the only formats that can be synced to the ipod video is .mov and .mp4.
    you need to convert the videos to these formats using 3rd party software.
    To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
    To get started: http://www.videora.com/en-us/Converter/iPod/
    If you have questions: http://www.videora.com/en-us/Converter/guides.html
    If you have more questions, post them here: http://www.pspvideo9.com/forums/index.php?c=8
    Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.
    GFF

  • Can't insert into nested table

    I can't inserted into a nested table and my SQL is listed below.
    SQL> CREATE TYPE naming_t AS OBJECT (name VARCHAR2(30), alias VARCHAR2(30)) NOT FINAL;
    2 /
    Type created.
    SQL> CREATE TYPE terminal_t;
    2 /
    Type created.
    SQL> CREATE TYPE terminal_t_nt AS TABLE OF REF terminal_t;
    2 /
    Type created.
    SQL> CREATE TYPE connectivitynode_t UNDER naming_t (terminals terminal_t_nt) NOT FINAL;
    2 /
    Type created.
    SQL> CREATE TYPE connectivitynode_t_nt AS TABLE OF REF connectivitynode_t;
    2 /
    Type created.
    SQL> CREATE TYPE terminal_t UNDER naming_t (connectivitynodes connectivitynode_t_nt) NOT FINAL;
    2 /
    Type created.
    SQL>
    SQL> CREATE TABLE naming_tb     (name VARCHAR2(30), alias VARCHAR2(30));
    Table created.
    SQL> CREATE TABLE connectivitynode_tb (name VARCHAR2(30), terminals terminal_t_nt) NESTED TABLE terminals STORE AS terminals_tb;
    Table created.
    SQL> CREATE TABLE terminal_tb     (name VARCHAR2(30), connectivitynodes connectivitynode_t_nt) NESTED TABLE connectivitynodes STORE AS connectivitynodes_tb;
    Table created.
    SQL>
    SQL> INSERT INTO naming_tb (name) VALUES ('AP1.132.B/C.T1');
    1 row created.
    SQL> INSERT INTO terminal_tb (name) VALUES ('AP1.132.B/C.T1');
    1 row created.
    SQL> INSERT INTO naming_tb (name) VALUES ('AP1.132.B/C.T2');
    1 row created.
    SQL> INSERT INTO terminal_tb (name) VALUES ('AP1.132.B/C.T2');
    1 row created.
    SQL>
    SQL> INSERT INTO naming_tb (name) VALUES ('AP1.132.B/C.N1');
    1 row created.
    SQL> INSERT INTO connectivitynode_tb (name) VALUES ('AP1.132.B/C.N1');
    1 row created.
    SQL> INSERT INTO TABLE (SELECT terminals FROM connectivitynode_tb WHERE name='AP1.132.B/C.N1') SELECT REF(p) FROM terminal WHERE p.name='AP1.132.B/C.T1' OR p.name='AP1.132.B/C.T2';
    INSERT INTO TABLE (SELECT terminals FROM connectivitynode_tb WHERE name='AP1.132.B/C.N1') SELECT REF(p) FROM terminal WHERE p.name='AP1.132.B/C.T1' OR p.name='AP1.132.B/C.T2'
    ERROR at line 1:
    ORA-00942: table or view does not exist

    I think you dont have the table terminal referred in following select statement
    SELECT REF(p) FROM terminal WHERE p.name='AP1.132.B/C.T1' OR p.name='AP1.132.B/C.T2';
    Chandar

  • Can I insert into a form build in FORMSCENTRAL, a Formula with the numerical data that are updated by a given formula, like in Excel?

    Can I insert into a form build in FORMSCENTRAL, a Formula with the numerical data that are updated by a given formula, like in Excel?

    Hello danna,
    please have a look there as a first step: http://helpx.adobe.com/acrobat-com/formscentral/topics.html  >>> Formula syntax for built-in functions  >>> http://helpx.adobe.com/acrobat-com/formscentral/help/formula-syntax-built-in-functions.htm l
    Hans-Günter

  • What type of Business Processes can be imported in Solution Manager 7.1?

    Hello Together,
    currently i deal with the topic: BusinessProcessMonitoring.
    My question: what types of businessprocess can be imported in Solution manager 7.1?
    - exported processes out of the NetWeaverDeveloperStudio?
    - processes out of the CE?
    Some else....???
    I would be happy about some answers.
    Thanks and kind regards
    Henry Radziwolek

    Hi Henry,
    Today in Solman 7.1 onwards creation of business processes is really very and you can use the content upload interface which means you can upload the processes via excel file as well.
    so you can download it from other system into a flat file and upload the same in solman to quickly do the same.
    http://sapinsider.wispubs.com/Assets/Blogs/2012/January/Introducing-Content-Upload-Interface-in-SolMan-7-dot-1
    in terms of importing from another solman ...if you have a transport route ...definately you can create a TR and import the project with processes into your new solman system
    or if it is Solution in another system then also you can use solution transfer function/feature to import it.
    Also, if you are talking about Netweaver BPM tool this requires integration setup with solman (BPB) etc to do that like ARIS integration etc.
    Integrate your Business Blueprint with SAP Netweaver BPM
    hope this helps you further.
    Regards
    Prakhar

Maybe you are looking for

  • Color shifting of a complex object

    I have a bitmap image of a flower that I would like to fade from one base color to another (i.e. red, orange, yellow, white, pink, etc). The image is moderately complex with two or three dozen shades in the image. Is there an easy way to do this? I f

  • FNM3 Balance in local currency F5 703

    Hi Support Team, When I try to  reversal a Loan documento the system show the message F5 703 Balance in local currency. I 've been looking for oss notes but there is nothing to this component about the issue. Before to write any note i want to know i

  • Replace content smart objects doesnt work properly.

    Hello fellow Photoshoppers, Currently i am working on reusable album templates with smart objects. At first i was very enthusiastic but this was soon to end. as the replacing doesnt work properly. I made the smart object by using: 1. > file 2. > plac

  • At User command - enhancement for FBL1N

    Good day, For our requirement, we have modified the Vendor Line Item display report (Tcode FBL1N) to include another field. Now we need enhance this further. When the user clicks on this additional field, a customer specific functionality needs to be

  • Can't set end jump in DVDSP2

    I'm running DVDSP2 on a Mac G4. When I'm trying to either set the end jump for a track or the target for a button, whenever I click on the bar which says 'No Target', it becomes blank and it won't drop down so I can set the target. Anyone experience