What Type of Memory to use inCQ 60 Compaq Notebook PC

Is the memory DDR2 or DDR3?

The dv6500 will use 4 gigs of RAM (2 x 2 gb modules) in hardware but with 32 bit Windows you can only effectively work with 3 gb. Installing 64 bit Windows will allow use of all 4 gigs.

Similar Messages

What type of FireWire to use

What type of FireWire to use to transfer files from my imac to my new macbook pro. Apple has several different types on their website and I do not know which type I need. THanks for any suggestions.

It would depend on the type of Firewire ports you have on each computer. If it is a very new MacBook Pro, then it may only have the FW 800 port. Depending on how old the iMac is, it may only have FW 400.
If both computers have Firewire 800 ports, you could use that.
I found this site searching for a FW400-FW800. It has pictures of both ports: http://www.sonnettech.com/product/fw_adapter.html

What type of disc is used for backing up itunes

What type of disc is used for backing up itunes?

You can backup your itunes library to whatever medium you like ( cd/dvd/flash drive/external drive/etc)

What type of disk is used on a mac book pro

What type of disk is used on my mac book pro? Double layer?

Find your model here and it has the specs which specifies the DVD writer.

Please also report what type of cloth was used

I've seen lots of conflicting reports on different polishes such as Brasso and the like.
I think one major variable is what type of cloth was used.
If people could please report what type of cloth is used, that'd be great. Thanks.

Selenia,
Thanks very much for the quick response, however, this does not help me.
The newest version of Crystal Reports that we have is 7.01. The menu selection you specified under Report does not exist.
The actual machine and instance of Crystal Reports that was used to create this was in another Business Unit and on machines that were retired long ago.
Dave
Edited by: Stratatel on Apr 28, 2010 1:27 AM

What type of memory card should I purchase for my iMac (late 2009)?

I'd like to increase the memory on my computer, as I'm running some pretty hefty programs (Parallels with Quicken, CS6, and some architecture drafting softwares) that really bog down the processing response time. I believe that I have two slots in the back of my machine, to add memory to, but have no clue what to purchase. I'd love to know what type of memory card I should purchase (or how to find out), in addition to the best place to buy it.
Thank you for your feedback!
Specs:
iMac: 27-inch, late 2009
Running: OSX Mountain Lion (10.8)
Processor: 3.06GHZ Intel Core 2 Duo
Memory (existing): 4GB 1067MHz DDR3
Graphics: ATI Radeon HD 4670 256 MB

Great idea! Thanks.

I have a Mac purchaesd in India. Now i am travelling to USA. In India power is at 220V but in USA it is 120V (if i am right). What i need to do. Also what type of plugs are used in USA. Type A,B,C etc.

I have a MacBook Pro purchaesd in India. Now i am travelling to USA. In India power is at 220V but in USA it is 120V (if i am right). What i need to do. Also what type of plugs are used in USA. Type A,B,C etc.

All you will need is a USA adapter for your MBP power adapter since it will work in electrical environments from 100v. to 220V. It seems that a type B will be needed.
en.wikipedia.org/wiki/Mains_electricity_by_country
Ciao.

What are the parameters? can u say what type of parameters regularly used?

what are the perameters? can u say what type of perameters regularly used?

Dear Srikanth
Thank for your up date . in my case the customer is assigned with two sales area. The org model , nothing is maintained in the attributes , still one is appearing in the pop up and and other one is not . It is surpricing.
if you can mention the logic of maintaining the division and distribution channel inthe attribute it is of great help.
Regards
Raj

What type of SCR to use?

i need to construct a three phase full converter without using a three phase transformer to control my output voltage, but i should use the firing angle to meet:
*Voltage source RMS value L-L : 750 V
*Source Frequency : 5000Hz
*Load Resistance : 10 Ohms
*Load Inductance : 50 mH
* Harmonics % : 10%
*DC output Voltage% of output Voltage maximum : 85%
can someone help me out please, because i should use a Thyristor (SCR) to control my circuit, and my circuit is not working when i try to simulate it. Plus i don't know how to plug an SCR in the crcuit and what type of SCR to plug.
Thanks for helping.
Roy Akel

Dear Roy,
Could you please tell us the exact SCR modell you had tried?
What do you mean by "my circuit is not working"?
Thank you,
Marton Litkei
NI Hungary

What type of encryption is using in Oracle Application (EBS)?

Dear all,
I am using oracle application version 11.5.8 and the oracle database version is
9.2.0.4. When I am login the oracle application, what type of encryption is?
How can I know?
Best Regards,
Amy

As standard? None.
Are you talking about password encryption in 11.5.8 ? It's a reversible encryption algorithm.
Are you talking about the network layer? Only if you've setup to run https mode.
Gareth

What type of protocol is used in local Logging Framework?

If my standalone java application uses the logging APIs of Access Server, which is located on the same server as my application, to read/write logs from/to the Server, what type of call or protocol they use for communication between them? Is it RMI or XML over HTTP as Rome Logging?

The hard disk changes with each generation of drive.. the original series were 7200rpm drives.. but as green drives became more readily avaialble and cheaper.. especially cheaper.. Apple moved to them.. The Latest TC uses WD green drives exclusively now..
Standard ordinary green WD are 5400rpm but maybe variable.
It is a slowish drive although probably just as fast as the original 500GB Seagate.
Now the important point.. there is no speed advantage in using a faster drive.. these boxes are processor-controller bound.
You can replace the slow green drive with an SSD and there is no improvement in speed.
Read the review where they did just that.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/7
The SSD was marginally faster at writing.. the green drive did faster reads..

What type of HDD is used in the time capsule unit?

I was just wondering what type of Hard Disk Drive was used in the time capsule device. Is it a "SATA" type drive or is it a "SSD"? If it's a SATA drive how fast is it( e.g.: 5400 rpm or 7500 rpm ). If it is a standard HDD can it be replaced with a Solid State Drive or a Fusion Drive type HDD.

The hard disk changes with each generation of drive.. the original series were 7200rpm drives.. but as green drives became more readily avaialble and cheaper.. especially cheaper.. Apple moved to them.. The Latest TC uses WD green drives exclusively now..
Standard ordinary green WD are 5400rpm but maybe variable.
It is a slowish drive although probably just as fast as the original 500GB Seagate.
Now the important point.. there is no speed advantage in using a faster drive.. these boxes are processor-controller bound.
You can replace the slow green drive with an SSD and there is no improvement in speed.
Read the review where they did just that.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/7
The SSD was marginally faster at writing.. the green drive did faster reads..

What type of memory cards can be used on hp6510

what memory cards are used in hp 6510

Hi,
Thank you for posting,
The HP Photosmart Supports the following memory cards.
Memory Stick Duo,
Secure Digital/MultimediaCard
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

What about session memory when using BEA Weblogic connection pooling?

Hi,
consider a web application, allowing database connections via a BEA Weblogic 8.1 application server. The app-server is pooling the oracle connections. The oracle database is running in dedicated server mode.
How are the database requests from the web app served by the connection pool from BEA?
1) Does one oracle session serve more than one request simultanously?
2) Does BEA serialize the requests, which means, that a session from the pool is always serving only one request at a time?
If (1) is true, than what about the session memory of Oracle sessions? I understand, that things like package global variables are beeing stored in this session private memory. If (1) is true, the PL/SQL programmer has the same situation, as with programming an Oracle databas in "shared server" mode, that is, he should not use package global variables etc.
Thankful for any ideas...
Message was edited by:
Xenofon

Xenofon Grigoriadis wrote:
Hi,
consider a web application, using BEA between client and an Oracle Database (v9i). BEA is pooling the oracle connections. The oracle database is running in dedicated server mode.
How are the database requests from the web app beeing served by the connection pool from BEA?
1) Does one oracle session serve more than one request simultanously?no.
2) Or does BEA serialize the requests, which means, that a session from the pool is always serving only one request at a time?
Reading "Configuring and Using WebLogic JDBC" from weblogic8.1 documentation, I read:
"... Your application "borrows" a connection from the pool, uses it, then returns it to the pool by closing it...."
What do you mean by returning the connection by closing it? Tbe server will either return the connection to the pool or close it...When application code does typical jdbc code, it obtains
a connection via a WebLogic DataSource, which reserves an
unused pooled connection and passes it (transparently wrapped)
to the application. The application uses it, and then closes
it. WebLogic intercepts the close() call via the wrapper, and
puts the DBMS connection back into the WebLogic pool.
The reason, why I as an Oracle programmer ask this is, because every session (=connection)
in Oracle has its own dedicate, private memory for things like global PL/SQL variables.
Now I want to figure out, if you have to careful in programming your databases, when
one Oracle session (=connection) is serving many weblogic requests.It is serving many requests, but always serially. Do note however, that we
also transparently cache/pool prepared and callable statements with the
connection so repeat uses of the connection will be able to get already-made
statements when they call prepareStatement() and prepareCall(). These
long-lived statements will each require a DBMS-side cursor.
>
Thankful for any ideas or practical experience...
Message was edited by:
mk637Joe

What type of column to use for this situation in SharePoint 2010?

Hi there,
In a SharePoint 2010 list - I have to add a few columns which need users to pick a numeric value and it's unit of measurement. E.g.
- 30 (Inches/ft/cms) <-- Here 30 is a number field and then a dropdown to select a unit.
An option is to create two columns (1st - Number type and 2nd Dropdown with Inches/ft/cms values).
But I have a lot of such sets in the same list and am not sure if above is the best way to go?
Are there any other options for me? Is a Site Content Type a good option? Anything else?
Thanks.

Hi,
I can think of two ways that you can accomplish what you are trying to -
1. Content types could be a way or Create Site columns and prepopluate the values in these columns and use it in your list
2. create custom column (C#) see here for more info -http://msdn.microsoft.com/en-us/library/ff648469.aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if the reply helps you

What Type of Memory to use inCQ 60 Compaq Notebook PC

Similar Messages

Maybe you are looking for