What type of repeater should I use with my new Airport Extreme?

what type of repeater should I use with my new Airport Extreme? Thanks.

If you want to repeat both bands of your dual band AirPort Extreme, another AirPort Extreme would meet these requirements.
If you only need to extend one of the bands that the AriPort Extreme provides, then an Airport Express would do that nicely.

Similar Messages

What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2 modem and I can't get the configuration working. What modem does Apple recommend?

I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?

Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem...

What type of microphone should I use with Captivate 6

My IT guy wants me to select a microphone and/or headset to record the verbiage for the videos we intend to make. Do you recommend a microphone or headset? And which specific model do you recommend for the best quality?
I would appreciate any feedback, thanks!
Melissa

Hi Melissa. We have two different mics we use. The first is a headset mic - a Sennheiser PC323D. I costs about $150 list price. The other mic we use is a Rode Podcaster. I don't know its price, but it's considerably more. Both produce good results for recording narration in Captivate. My personal preference is the Sennheiser headset. It has a good frequency range and does a good job of reducing background noise, plus it maintains a constant position relative to my mouth, so I can move around and still sound good. The Podcaster is a fixed position mic. Other of our folks prefer its sound.
We also record our audio in small rooms with sound deadening foam on the walls. If you don't have that, at least find a quiet place. I've even recorded in my walk-in closet at home. The clothes do a good job of absorbing ambient noise and reflections.
I hope this helps.
Bob

What XA JDBC driver should I use with Oracle 8i 8.1.6

I need to use an XA JDBC driver for Oracle 8i 8.1.6. I am using the driver in
a ConnectionPool in a TxDataSource for use by some entity beans using EJB 2.0.
I'm running WebLogic Server 6.0 sp2, EJB 2.0, Java 2 SDK 1.3.1 Server VM, Solaris
2.7, and Oracle 8i 8.1.6.
I know of three different Oracle XA drivers: WebLogic jDriver for Oracle XA, Oracle
OCI type 2 driver XA, and Oracle Thin tyoe 2 XA. Are there any other drivers
that I can use for Oracle 8.1.6? Which driver and which version should I use?
For example, can I use the Oracle 8.1.7 JDBC drivers with the Oracle 8.1.6 server,
or would the Oracle 9i drivers work with the Oracle 8i server? Which drivers
are faster, and which support more features? I assume that I should not use the
type 4 driver since I am not using an applet, but I don't know if there are bugs
in the OCI C library for Solaris or in the JDBC drivers that use it that prevent
XA from woking. Which version of the Oracle C OCI library should I use if I use
a type 2 driver?
Thanks,
Ross Goldberg

Hi,
I think you can't use the 8.1.6 thin driver for XA, you would have to
use the OCI driver or 2PC-enable your datasource. AFAIK this has been
changed for 8.1.7
Check http://e-docs.bea.com/wls/docs61/////jta/thirdpartytx.html.
Daniel
-----Original Message-----
From: Gene Chuang [mailto:[email protected]]
Posted At: Thursday, August 30, 2001 2:04 AM
Posted To: jdbc
Conversation: What XA JDBC driver should I use with Oracle 8i 8.1.6
Subject: Re: What XA JDBC driver should I use with Oracle 8i 8.1.6
I've asked this question before. This is the reply from Joe
Weinstein:
For reliability and JDBC 2.0 compliance, I recommend the
Oracle thin driver.
If not that driver, you should verify that a type-2 driver
actually does
deliver better performance, but then I would not have a
strong preference
between their type-2 and ours. Theirs may be faster, and JDBC
2.0 compliant.
Both are succeptible to OCI bugs, some of which only they can
fix, but we
listen.
Gene
"Ross Goldberg" <[email protected]> wrote in message
news:[email protected]...
>
I need to use an XA JDBC driver for Oracle 8i 8.1.6. I am using thedriver in
a ConnectionPool in a TxDataSource for use by some entity beans usingEJB 2.0.
I'm running WebLogic Server 6.0 sp2, EJB 2.0, Java 2 SDK 1.3.1 ServerVM, Solaris
2.7, and Oracle 8i 8.1.6.
I know of three different Oracle XA drivers: WebLogic jDriver forOracle XA, Oracle
OCI type 2 driver XA, and Oracle Thin tyoe 2 XA. Are there any otherdrivers
that I can use for Oracle 8.1.6? Which driver and which versionshould I use?
For example, can I use the Oracle 8.1.7 JDBC drivers with the Oracle8.1.6 server,
or would the Oracle 9i drivers work with the Oracle 8i server? Whichdrivers
are faster, and which support more features? I assume that I shouldnot use the
type 4 driver since I am not using an applet, but I don't know ifthere are bugs
in the OCI C library for Solaris or in the JDBC drivers that use itthat prevent
XA from woking. Which version of the Oracle C OCI library should Iuse if I use
a type 2 driver?
Thanks,
Ross Goldberg

What word processing program should I use with my Mac, what word processing program should I use with my Mac, what word processing program should I use with my Mac

what word processing program should I use with my Mac?

steve359 wrote:
For free you can download NeoOffice
Not quite. Downloading the current version of NeoOffice is definitely not free (downloading the previous version is). The developers of NeoOffice (the most Mac-like of the StarOffice descendants) make a distinction between the application itself (which is free) and downloading it, for which they require what they are pleased to call a "donation" (since it's mandatory, I would call it a fee).
shldr2thewheel wrote:
I totally forget about TextEdit all the time..
Indeed. For basic WP tasks, TextEdit can be quite satisfactory.
embauerxz
I only need it for reports
Would that include the report on the state of the US economy -- you know, the one President Obama asked you to deliver to the White House no later than 7AM on January 4? The one in two columns, with numbered paragraphs, table of contents, footnotes, mathematical formulae, 40 figures, 60 charts, quotations in Arabic, Japanese, and classical Greek, and 15 pages of references in APA style?
Grant Bennet-Alder is right -- "the real answer depends on what work you expect to do with it, and with whom you expect to do this work". There are dozens of word processors for Mac, from the venerable Word to the no less venerable Tex-Edit+. It would pointless to start listing them all, when many of them might be either too little or too much for your needs.

My old Time capsule was not working well. I replaced it with a new Airport Extreme. Now I can see the other airport express stations. I tried resetting them, but it did not work. What do I do?

I replaced my old time capsule with a new airport extreme. I have 3 airport express stations that I have all around the house. (2 1st generation, 1 second generation). I can't see them with airport utility. I tried resetting, but no luck. Any suggestions?

Bring all the express to the same room as the mac you are using to setup the network..
One by one, plug them in and do full factory reset on them.. they should then show up in the Airport utility as Other Wi-Fi devices (1) and you can select them and continue the setup.
If that fails try using the airport utility on ipad or iphone as they are far less problematic than Yosemite in particular.

Can I use my 2010 AirPort Extreme as a range extender with a new AirPort Extreme?

I want to use an existing AirPort Extreme (2010 model) with a new AirPort Extreme to extend the range and signal strength into a shop. They are different designations, one n and the other ac. Are they compatible. I need to know before I buy the new router.

The new AirPort Extreme will provide an ac,n,g,b compatible wireless signal.
The existing AirPort Extreme can be configured to extend the n,g,b signal, but it cannot extend the ac signal.

Any tricks to swapping out my old time capsule with a new airport extreme I am also using airport expresses

Any tricks to swapping out my old time capsule with a new airport extreme I am also using airport expresses? The hard drive on the TC quit working.

I do plan on using an external USB HDD for time machine backups. I have both 802.11g and 802.11n used for playing music via stereos.
I would recommend against it. Apple does not support Time Machine backups to AirPort Disks (USB HDD attached to the AirPort Extreme). Although folks have done so, we get a number of them here asking for help with their corrupted backups. If your backups are critical to you, please use another means (like connecting the USB HDD directly to your Mac) to do so.

I have a RCA media streamer that will not connect to my network with a new airport extreme.

I have a RCA media streamer (Model # DSB872WR) that will not connect to my network with a new airport extreme.I had to create a new network and my computers are connected but media streamer will not. Can anyone help? Thank you

Hi, papineaubill!
Welcome to The Canon Forums, and thank you for your inquiry!
We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market. If you live outside the United States, please click here and select your country or region for your support needs.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
Thanks for choosing Canon!

Extending an existing wireless network with a new Airport Extreme(802.11n)

Is it possible to extrend a existing wireless network comprised on a Airport Extreme (g) and a Airport Express with a new Airport Extreme (n) ? and possibly accesss an airdisk? Have tried settng channel to the same (1) but no worky.
I have had real problems (at least 2 hours with Apple Care to no avail) at getting the new Airport Extreme(n) to connect to the internet (Ozemail/iinet) with PPOE. Authentication when changed to occur at ADSL modem and produces no errors (green light) but no internet still through AE(n). Not Hardware either as both ADSL modem and AE(n) have been changed.
So as a last ditch attempt, thought I might try extending the preexisting network that works fine so I can access an AirDisk.
Any reponses appreciated.

Search this forum for "WDS". Since I am having massive problems myself right now, I can only tell you: Try the two methods mentioned in this thread:
http://discussions.apple.com/thread.jspa?threadID=944334&tstart=0
Maybe you're lucky!

What type of partition should I use? Range or Hash or ..?

Hi,
I am on Oracle 8.1.7.4 .
I have a table with 10 million rows and looks like its a good candidate for partitioning.
There is a varchar2 column and the data is evenly distributed on the string value. If I want to partition the table on that string value what type of partitioning can I use. How can I give the range, if I use range partition, on the string value ?
Can/Should I use hash partitioning?
I know that there is a list partitioning in O9i, but I am on 8i.
Please help.
Regards

<quote>
I have a table with 10 million rows and looks like its a good candidate for partitioning.
</quote>
Table volume, in itself, is not enough to warrant partitioning â¦ hope you have some other reasons.
<quote>
â¦ but would like to partition the table on the mentioned varchar2 column, so that queries would be efficiant.
</quote>
Since you donât mention the actual query or class of queries, maybe it is worth mentioning that partitioning could speed up some queries but also can slow down a lot more other queries.
<quote>
So, how can i re-create the table partitioned on a varchar2 column
</quote>
No different than numbers or dates?
create table tp
( str   varchar2(10) not null
,fill char(20)      not null
partition by range(str)
( partition p1 values less than ('F')
,partition p2 values less than ('L')
,partition p3 values less than ('R')
,partition p4 values less than (maxvalue)
insert into tp
select substr(object_name,1,10), lpad('x',20,'x')
from user_objects
flip@FLOP> select * from tp partition (p2);
STR        FILL
F1         xxxxxxxxxxxxxxxxxxxx
GENERATE_R xxxxxxxxxxxxxxxxxxxx
IPSDEV.US. xxxxxxxxxxxxxxxxxxxxThe link to Tomâs article is fine â¦ it just happens to be one of the few threads heâs not mentioning that partitioning is not the magic fast=true mechanism â¦ look for some other articles on partitioning and youâll quickly discover his views on this subject.
There may be a case for partitioning â¦ but you havenât presented any reasonable justification for it â¦ so, why bother?

What type of restore should I use?

My computer is properly backed up using Time Machine. I created a partition using Bootcamp so I could install Windows (I haven't actually installed Windows yet). However, after testing Parallels, which is an amazing program!, I want to get rid of the partition and use Parallels instead.
My understanding is that I have to wipe my hard drive to erase the partition. Assuming this is true, what version of restore should I use? I want the computer to be exactly as it is in the backup, except for the partition.

Ian Chamandy1 wrote:
When I go into the Partition tab, the diagram and text shows my HD as having 148.73 gigs of space (it appears in blue on top in the diagram) and "available space" being 49.5 gigs (it appears in white on the bottom).
Once you deleted the Boot Camp partition, you now have only a single partition. The light-blue shading represents the data in the partition; the white are represents the rest ("available space").
Is this how it should be? I clicked on both the blue area and the white area but that doesn't select them. There is no line between them for me to drag. Also, the "-" and "Options" buttons are grayed out.
If there's only one partition on the disk, the whole diagram, containing both the blue shading and white area, covering the entire disk, should be outlined in medium blue. The "-" sign is grayed-out because there's only the one partition. If there were 2 or more, you could use it to delete one.
If you wanted to make a second partition, you would click the plus sign. DU would then change the diagram, splitting the existing partition. Then you'd see a line between the two, which you could drag up or down, etc. The Options button is used when setting-up a new or erased drive "from scratch," to specify the *Partition Map Scheme* for the entire drive.
Browse Disk Utility's help for a general idea of what it can do. (It's one of the few apps that has fairly comprehensive explanations and instructions.)
I should mention that I installed Parallels so I could run Windows and Mac OS simultaneously (it is quite amazing!). Could it be that Parallels creates an unlabeled partition?
I don't do Windoze, but it's my understanding that Parallels makes one huge OSX file that contains the entire Windows system, rather than the way Boot Camp uses a separate partition. I also understand that this huge file is automatically excluded from Time Machine, so it doesn't back the whole thing up every time anything is changed. You can check this via TM Preferences > Options.

What type of file can be used with file generator in Motion 4?

Regarding using the File Generator in Motion 4, what type of file can be used? After clicking the browse button in the inspector tab,
all files appear greyed out and are not selectable.
Thanks!
Richard

Cool. Thanks GFXZen. I was stumped by TextEdit saving files in rich text format. Here is an article on how to save in plain text from TextEdit:
http://support.apple.com/kb/TA20406

Can I add a WiFi printer through WPS with the new AirPort Extreme and AirPort Utility 6.3?

It says here that AirPort Utility 6.2 supports WPS-capable WiFi printers, but on the new AirPort Extreme techs pecs Apple insists that the way printing is shared is by connecting the printer to the AirPort Extreme with a USB cable, which really defeats the whole purpose of WiFi printing doesn't it?
Does the new Airport Extreme support WPS-capable printing? Does AirPort Utility 6.3 support it?

Does the new Airport Extreme support WPS-capable printing?
Yes
Does AirPort Utility 6.3 support it?
Yes

What type of dvds should i use for writing with hpenvy touchsmart

what type dvds are writable in the pc
This question was solved.
View Solution.

Hi,
What is your "hp envy touchsmart 17.1". Normally you can use blank DVD+R or DVD-R to write.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

What type of repeater should I use with my new Airport Extreme?

Similar Messages

Maybe you are looking for