What type of s.c.c module suitable for coil type transducer?
Hi,
I have transducer which is of coil type. Usually, this transducer is used in a closed system. But now, I will connect it to my national instruments. What kind of is suitable for this purpose ?
Thank you.
Regards,
W.P.
Wibby-
It will ultimately depend on what type of transducer you have. What do you mean by coil type? Is it a LVDT? Or is it electroacoustic? If the transducer outputs a voltage, then the NI SCC-A10 might work, but without some more info/the owner's manual for the transducer, it is tough to make a suggestion. Here is a link to our signal conditioning webpage, if you haven't already visited it:
http://www.ni.com/signalconditioning/
This will be a good starting point for finding the correct SCC module for your hardware setup.
Let us know if you need any further assistance!
Regards,
Gary Parente
Applications Engineer
National Instruments
Gary P.
Applications Engineer
National Instruments
Visit ni.com/gettingstarted for step-by-step help in setting up your system.
Similar Messages
-
Is there a single SCXI module suitable for mixed sensor inputs?
I'm am attempting to put together an SCXI system to acquire signals from a number of different sensor types. I have a large number of thermocouples for which I have decided to use the SCXI-1102 modules. I also have a single pressure transducer (spec unknown so I'll assume strain gauge type), a single accelerometer (again, spec unknown) and possibly some straight forward voltages (count and spec unknown so assume -10V to +10V max range).
Is there a single SCXI module through which I can acquire the pressure transducer, accelerometer and voltage signals? Or maybe just use 2 modules instead of 3 if I have a SCXI-1530 for my accelerometer and a different module for the voltages and pressure transducer? I was looking at the SCXI-1121 which sounds promising for the voltages and pressure but then was unsure as to which terminal block to use to allow the combination of signals (I could possibly live with a -5V to +5V range if necessary).
(Extra info: I am using TC-2095 blocks with my SCXI-1102 modules so can't really use spare inputs on those for voltage inputs).
Thanks for any help.
CAS
Solved!
Go to Solution.Dear Cas,
Thanks for your enquiry. You have obviously done a great deal of research into this matter already. I am afraid that it is unlikely that you will be able to use a single SCXI module to carry out all the functions you have listed. As accelerometers require such specialised conditioning, it will require a dedicated module - as you already mentioned, something like the 1530 (4 channel accelerometer input module) would be ideal.
However, you have a number of different options for the pressure, voltage and temperature measurements.
For example, you could purchase a 1520 mudule for your pressure measurements, and then use a general purpose 1102B for the voltage and temperature (you would require the 1303 isothermal terminal block to condition the thermocouple readings... and bypass the CJC technology for the voltage readings).
Or, perhaps you could use the 1102 thermocouple module for your temperature readings, and then use a 1102B to take the voltage and pressure readings. Obviously this would involve making your own bridge configuration for the pressure sensor, but that should be fairly easy.
Before you make any final decisions, I would recommend that you call your local branch of NI and speak with a sales representative. Perhaps, a member of the field sales staff could actually come to see you to discuss the matter face to face.
lastly, it sounds like you have a relatively high channel count for some of your readings, which is why you have decided to use the SCXI platform. I was just wondering if you had considered compact DAQ (cDAQ), which combines DAQ hardware with signal conditioning. Higher spec, ease of use, lower channel count. Swings and roundabouts I guess.
I hope this has been of some use to you.
Best wishes,
Rich R
Applications Engineer
National Instruments UK & Ireland -
What are the parameters of Function Module
Hi,
What are the parameters of Function Module?Function Modules are special external subroutine stored in a central library. The R/3 system provides numerous predefined function modules that you can call from the ABAP/4 programs.
All the function Modules are created under the Function Groups. Function Groups are nothing but the related group of function modules.
The function modules can be maintained through T.CodeSE37 and T.Code SE80.
In general the function module has the following components.
Documentation:
This is the place where you can find the discription/purpose of the function module.
Import & Export Parameters.
Import parameters correspond to the formal input parameters of subroutines. They pass data from the calling program to the function module.
Export parameters correspond to the formal input parameters of subroutines. They pass data from the function module back to the calling program.
Table Parameters.
Table parameters are internal tables. Internal tables are treated like changing parameters and are always passed by reference.
Exceptions.
Exceptions are used to handle error scenarios which can occur in the function modules. The function modules checks for any type of error and raise exception and returns SY-SUBRC value to the calling program.
Source Code:
the programming logic of the function module is written in this source code.
Rewards if useful. -
Which type of V/A sensor suitable for the use of SCC -2345?
Which type/brand of Voltage/current sensor suitable for the connection of SCC -2345?
Hi TARC,
There are a lot of options for measuring voltage or current in the National Instruments SCC series. These are listed below, with the link to NI’s website where these modules can be found.
SCC Analog Input Modules
http://sine.ni.com/nips/cds/view/p/lang/en/nid/10339
2 Channel Voltage Input Module:
· SCC-AI01, 2 Channel Isolated Analog Input (42V, 10 kHz)
· SCC-AI02, 2 Channel Isolated Analog Input (20V, 10 kHz)
· SCC-AI03, 2 Channel Isolated Analog Input (10V, 10 kHz)
· SCC-AI04, 2-Channel Isolated Analog Input (5V, 10 kHz)
· SCC-AI05, 2-Channel Isolated Analog Input (1V, 10 kHz)
· SCC-AI06, 2 Channel Isolated Analog Input (100 mV, 10 kHz)
· SCC-AI07, 2 Channel Isolated Analog Input (50 mV, 10 kHz)
· SCC-AI13, 2 Channel Isolated Analog Input (10V, 4 Hz)
· SCC-AI14, 2 Channel Isolated Analog Input (5V, 4 Hz)
2 Channel Current Input Module
· SCC-CI20 2-Channel Current Input Module, 0-20 mA
2 Channel Voltage Attenuator Module
· SCC-A10 2-Channel Attenuator Input Module, 10-to-1
These modules will work with any standard transducer.
Hope this helps!
Ed Waxler | Applications Engineering | National Instruments -
NoSuchProviderException: No provider for Address type: rfc822
this is the stack : No provider for Address type: rfc822
javax.mail.NoSuchProviderException: No provider for Address type: rfc822
at javax.mail.Session.getTransport(Session.java:475)
at javax.mail.Transport.send0(Transport.java:154)
at javax.mail.Transport.send(Transport.java:80)
I know what it means....but why it happens?
please help!!!!!!!!!!!![joyrex75],
I suspect that the CLASSPATH settings on the machine that you are using is pointing only to the mail.jar file. If you are setting up the Java runtime environment that includes only the mail.jar file, your runtime environment will not have the mail providers such as the POP3, IMAP or SMTP .jar files.
Point your CLASSPATH to the mailapi.jar file which contains the JavaMail APIs and all the mail protocol providers that SUN supports i.e. POP3, IMAP and SMTP. Try to execute the java command on your JavaMail application and see if throws out the Exception again.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/ -
The swf tag spec for tag type 41 and 63?
Hi.
Where can I find the swf tag spec for tag type 41, 63?
I made the tag type list by reading the SWF file format
specification
http://www.adobe.com/devnet/swf/pdf/swf_file_format_spec_v9.pdf
tag type:
0: End
1: ShowFrame
2: DefineShape
4: PlaceObject
5: RemoveObject
6: DefineBits
7: DefineButton
8: JPEGTables
9: SetBackgroundColor
10: DefineFont
11: DefineText
12: DoAction
13: DefineFontInfo
14: DefineSound
15: StartSound
17: DefineButtonSound
18: SoundStreamHead
19: SoundStreamBlock
20: DefineBitsLossless
21: DefineBitsJPEG2
22: DefineShape2
23: DefineButtonCxform
24: Protect
26: PlaceObject2
28: RemoveObject2
32: DefineShape3
33: DefineText2
34: DefineButton2
35: DefineBitsJPEG3
36: DefineBitsLossless2
37: DefineEditText
39: DefineSprite
43: FrameLabel
45: SoundStreamHead2
46: DefineMorphShape
48: DefineFont2
56: ExportAssets
57: ImportAssets
58: EnableDebugger
59: DoInitAction
60: DefineVideoStream
61: VideoFrame
62: DefineFontInfo2
64: EnableDebugger2
65: ScriptLimits
66: SetTabIndex
69: FileAttributes
70: PlaceObject3
71: ImportAssets2
73: DefineFontAlignZones
74: CSMTextSettings
75: DefineFont3
76: SymbolClass
77: Metadata
78: DefineScaleGrid
82: DoABC
83: DefineShape4
84: DefineMorphShape2
86: DefineSceneAndFrameLabelData
87: DefineBinaryData
88: DefineFontName
89: StartSound2
And I found there are some unexplained tag types.
Escpecially, I need the spec for tag type 41 and 63
because those tag types exists in air files of my application
which I built with the Flex Builder 3.
Thanks in advance.I've found this: http://opensource.adobe.com/svn/opensource/flex/sdk/trunk/modules/swfutils/src/java/flash/ swf/TagValues.java
-
Is Indesign suitable for creating a directory with anchored images?
I have an ancient eight-page Quark document (originally created in 3.5, now in 8.5) that contains over 200 3cm adverts created in other applications called in as images anchored into text. This means that each month I can add or remove entries and the rest flows round in linked text boxes.
It also means that Quark quits every few minutes and the job is now virtually impossible to complete.
I am considering recreating the whole thing in Indesign but before I do, I would like to hear from anyone doing the same type of thing:
How stable is Indesign for this type of job? How does it cope with over 200 images (pdfs, eps, tiffs, jpgs whatever) anchored as text? Is there a format for images that Indesign prefers to handle? I imagine it's pretty intensive to process as each advert also contains an image or two and fonts of its own. I'd rather keep the adverts as vector files as the text is so tiny – even though I know that resaving the lot in Photoshop would probably help no end (removing font problems, embedded images etc etc).
Any suggestions, feedback etc gratefully received.
thanksI'd rather keep the adverts as vector files as the text is so tiny – even though I know that resaving the lot in Photoshop would probably help no end (removing font problems, embedded images etc etc).
It shouldn't be a problem unless the Quark issue comes over to ID (something like a corrupt font). As long as you link and don't embed or paste the vector art; images, fonts, or complex drawing won't add to the screen redraw overhead because the preview is a JPEG proxy. -
[Q] Using viewCriteria for Date type
To Query data, I used ViewCriteria.
But it works well for Varchar2, Number type.
But it does not work for Date type.
for example
If I set variables like the below, it works,
attrName = "OrdName";
attrValue = "Nick";
But, If I set variables like the below, it does not work
attrName = "AppDate";
attrValue = "04.5.12";
ViewCriteria vc = order.createViewCriteria();
ViewCriteriaRow vcr = vc.createViewCriteriaRow();
vcr.setAttribute(attrName, attrValue);
vc.addElement(vcr);
order.applyViewCriteria(vc);
order.executeQuery();
Can I solve this problem ?using a custom expression in the view criteria, ex.
vcr.setAttribute("DateField", "LIKE TO_DATE('" + dateField.toString() + "', 'yyyy-mm-dd')");
similarly, you can use other expressions to remove the default BC4J problems w/ dates (>, <, between) - At least I know you can't use = to get it to work right.
The default handling of BC4J is to say = TO_DATE(whatever you put in the value portion) where it needs to be LIKE to work properly - for some reason - probably a patch is available for it. -
What are the control functions of Suitability and setup type key in work center?
Hi all,
Can any1 plz tell me what is suitability and setup type key in workcenter default values tab?
what are the functions controlled by these keys?Hello,
Control Key in Defaut value keys screen is mainly for defining how the work center will be used in routings.
Almost in all the PP we define same Control key to the work center as well in the routing.
For example in work center control Key PP01 is used to define Routings/Internal proc. activities. When we go to the routing screen even if we do not see our components, work centers or control key we have to manually enter these details ans here control Key will remain the same as it was in Work center.
No. of individual capacity defines how many machines are there of the same type in the work center. E.g if I have 5 CNC machines then I will make One work center and in capacity screen I will put 5 as No. of individual Capacity.
Regards,
Piyush -
What is outbound function module for IDoc type INFRECMASS01
Hi,
What is outbound function module for IDoc type INFRECMASS01? This is for purchasing info record.
Thanks
KamalHi Kamal,
Have you looked standard program <b>RBDSEINF</b> or transaction code <b>ME18</b>?
This program will call function module <b>MASTERIDOC_CREATE_REQ_INFREC</b> to generate purchasing info record IDoc.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
What are the different 'Add-on modules' available with LabVIEW?
What are the different 'Add-on modules' available with LabVIEW?
What are the types of 'Add-on Cards'?
Cards and modules are different,thats true.Is it that modules means software and are they same as 'add-on toolsets'.Please give the details/URL which would give me various toolsets in detail and also the specifications of various add-on cards?
Kindly do the needful
I require these details immediately.I am an Engg student and learning LabVIEWduplicate post
-
What index is suitable for a table with no unique columns and no primary key
alpha
beta
gamma
col1
col2
col3
100
1
-1
a
b
c
100
1
-2
d
e
f
101
1
-2
t
t
y
102
2
1
j
k
l
Sample data above and below is the dataype for each one of them
alpha datatype- string
beta datatype-integer
gamma datatype-integer
col1,col2,col3 are all string datatypes.
Note:columns are not unique and we would be using alpha,beta,gamma to uniquely identify a record .Now as you see my sample data this is in a table which doesnt have index .I would like to have a index created covering these columns (alpha,beta,gamma) .I
beleive that creating clustered index having covering columns will be better.
What would you recommend the index type should be here in this case.Say data volume is 1 milion records and we always use the alpha,beta,gamma columns when we filiter or query records
what index is suitable for a table with no unique columns and primary key?
col1
col2
col3
MudassarMany thanks for your explanation .
When I tried querying using the below query on my heap table the sql server suggested to create NON CLUSTERED INDEX INCLUDING columns ,[beta],[gamma] ,[col1]
,[col2] ,[col3]
SELECT [alpha]
,[beta]
,[gamma]
,[col1]
,[col2]
,[col3]
FROM [TEST].[dbo].[Test]
where [alpha]='10100'
My question is why it didn't suggest Clustered INDEX and chose NON clustered index ?
Mudassar -
ANSAL module for wage types !
Hello,
Can you please explain
1. What is the significance (why & when is it used) of ANSAL module in wage type configuration ?
2. How is this configured ?
Thank You,
AnthonyHi
1. What is the end result of configuring the tables mentioned above ?
> You can default the WT's and its values in IT 8 using above configuration.
2. Will the field Ann. salary in IT0008 be populated ?
> If you enter the amt in WT's field which is defaulted, ANSAL field will automatically calculates annual amts.
3. So do we use ANSAL only for generating the annual salary ? Is there any other purpose of using this
module for wage types ?
> As of past experience, i have used only for defaulting the values ie.. configuring the IT-0008 to make it easier for the enduser to enter the values.
Good Luck
Pavan
Reward Points if it is useful -
Inbound function module for IDoc type INFRECMASS01
Hello everybody,
What is the inbound function module for IDoc type INFRECMASS01?
I tried IDOC_INPUT_INFREC (as for IDoc INFREC01), but I got the following message (B1 044): Incorrect function module IDOC_INPUT_INFREC called up
Thanks in advance
RolandThe only difference between INFRECMASS01 and INFREC01 is that repitition of the same segments. However, the standard function module is hardcoded with IDOC type INFREC01, so if you want to use the MASS IDOC copy the standard one and put in the logic to loop around and process the info records one by one.
There is no standard funtion that can process mass idoc of the info record.
Regards,
Ravi
Note: Please mark the helpful answers -
What is the process code for message type FIXEDASSET_CREATE?
Hi all
please tell me that what is the process code for
MESSGAE TYPE = FIXEDASSEt_CREATE,
FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
BASIC TYPE = FIXEDASSET_CREATE01 ?
thanx in advance.......
Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
Edited by: Prachi Sharma on Jan 11, 2008 8:03 AMHi,
Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
Check below Tables as well
EDE1T
EDE2T
EDE5T
EDE6T
TEDE5
TEDE6
Regards,
Satish
Maybe you are looking for
-
Issue when deploying web service
Hi, I'm new to web services. Im currently using netbeans 6.0 beta 1 to create my web services. After creating and deploying it on the bundled tomcat 6 server, i get this error that says that requested resource not found. What could be the cause of it
-
White lines around transparent gifs
I've tried without success to eliminate the thin white line that appears around my transparent gifs in Fireworks. Does anyone know how to achieve this?
-
How to read channel for channel and appended data for appended data?
Good day, I wrote a little program that saves blocks of data after a trigger to a file, it will append these blocks off data as much times as you set it. Each appended data block has a time stamp and a signal path and burst number as a header. I use
-
After a failed disk utility fix my Macintosh hd is gone!
I tried to do a disk utility repair on my wifes white macbook and somehow my macintosh hd has vanished. I cannot even quit and restart unless I have the disk in, which is useless.....Need Help!
-
Hi, Hope this finds you well. I have an e-book that opens using Acrobat 9 Pro. Whenever I try to print out specific pages, whether I try current page or a range of pages it starts at some page that's not or is not in the range I have selected. I woul