"what u hear" available but not working (vista)

okay so i just upgraded my x-fi drivers to the latest release and the "what u hear" recording option became available... only problem is it doesn't function as it's supposed to, i.e. it's not receiving the audio signal from the output, so when i go to record i get nothing... i have it activated in the sound options and i have it selected as the recording source... what do i have to do to get it functioning? [email protected]

coldpenguin,
I can't recall much info for the Audigy but see if the option is listed in the properties setting. Open sounds and audio devices and go to audio tab. Click at Volume button of the 'Sound Recording' column. Now click on Options->Properties. Do you have that option listed?
Jason

Similar Messages

  • EDGE is available but not working, requiring reboot

    I have a 1st gen iPhone with firmware 2.0. A problem I have noticed with the new firmware is that sometimes I'll lose internet connectivity -- apps like Weather will simply time out -- and to restore it, I'll have to shut down the iPhone and reboot. That works every time. Since I've already performed one restore, is there anything else I can do?

    Anyone know if there is a solution to this? My Edge connections shows that it is up but it will not fetch or push email. And if i go to a website using safari it wont connect but will show that Edge is up and working. I also have to turn off the phone and turn it back on in order for it to start working again. But then it stops again. Any ideas? is this a known issue? please help. Im paying for an unlimited plan that im only being able to use when on wifi.

  • How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

    How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

    Try reset all settings.
    Settings > General > Reset > Reset all settings.  It won't delete any data.

  • What does it mean if my location services are turned on, but not working?

    What does it mean if my location services are turned on, but not working?  It has always worked before.  It is turned on in Settings but when I try to use an app that requires location services, it says they are not on, and the little arrow is not appearing at the top of the screen.

    thank you...I tried this immediately after noticing but to no avail. I thought the phone died but I kept seeing the light on so I googled some things and it says it may be watered damaged and I'm not sure how.

  • I have ios7.1.2 on my iphone and am trying to upgrade to 8.0.2. I haven't installed 8 yet and when I try and upgrade nothing happens.  It says just the improvements from 8 are available but not the whole ios.  What to do?

    I have ios7.1.2 on my iphone and am trying to upgrade to 8.0.2. I haven't installed 8 yet and when I try and upgrade nothing happens.  It says ios8.0.2  improvements from 8.0.1 are available but not the whole ios.  What to do?

    It sounds like maybe 8.0.1 has downloaded onto your phone but not installed. You can check for it in Settings > General > Usage > Storage, Manage Storage. If it's there you should see it at the top of the list of apps. Swipe to delete it. 8.0.1 was pulled by Apple quickly after it was introduced due to issues and replaced by 8.0.2. Once it's deleted you should be able to download and install 8.0.2.

  • HT4061 My phone can't turned on. I tried to press the home button and main button at the same time, but not working. what should I do?

    Iphone 4s can't turned on, goes total black. Tried to press button and main button at the same time, but not working. what should I do?

    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn phone off
    hold home button and plug cable into phone.  do not release home button until an itunes graphic appears on device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • [RTM] Aero Peek not available or not working

    hello, I have Ultimate Final from my MSDN subscription installed. First I installed it on a notebook (C2D, Nvidia 9600GS) and got to see Aero and it's features. Especially: Aero Peek.
    Now I have it also installed on my Desktop - a much more powerfull PC (3GHz 4 core, Nvidia 8800GT). Aero Performance Index is 6.9. I have choosen an aero theme and Aero is basically working (transparency, snapping etc.). What is not working is Peek :( That means: I hover the mouse over the "Show Desktop" on the taskbar but get no transparent windows. I hover the mouse over a window preview on the taskbar but do not get the "show this window and make all others transparent".
     And what's weird: The setting in the Taskbar properties is checked but grayed out/readonly. Also, in the context menu on the "Show Desktop" Button in the taskbar, the "Preview Desktop" entry is checked but grayed out/readonly.
    In short: Desktop Preview (Peek) is "Enabled" but not working and I cannot change the setting.
    What could be the reason for this?
    Desktop machine is a dual screen setup. I disabled one screen but this made no difference. I switched between various themes but still no difference. I found a hint to a registry key, something in the line of "desktopPreviewDisabled" and it is set to "0" (=enabled as all the checkboxes indicate). I did set it to 1 and back to 0 - no difference.
    Help please

    Update: Peek does work with a second (the admin) user that has still all default settings.
    With my normal user account I played around a lot to make it fit my needs. Now I really wonder which change caused Peek to not work anymore?
    my aero peek was greyed out, I tweaked with theme fonts and a few theme settings then checked aero peek, It was ticked and UNTICKABLE it works now, lol haha create a new profile gimme a break geta  clue, besides reg fixes abound for these greyed out
    type of instances its always fixable one way or another, specially with a reg script to change the greyed out to usable tickable option once again, anyway safemode it if you have to and get your windows aero peek back peace out and stop blabbing about creating
    a new profile for this troublesome greyed out aeropeek good lord you guys some of ya are far too extreme and way off base and troubleshooting resoultions to mundane issues... peace out njoy your  pc time get multimedia tool heaven ...<<< www.mowtools.ourtoolbar.com
    from  novice beginner way up to xtreme pc elit power hungry users will find all the multimedia on and offline apps in this fine toolbar lifesavers get it while its f free peace out!
    Long time WinXP user, skipped Vista and starting to like 7
    Hi
    Try the Aero troubleshooter.
    Open Control Panel/Troubleshooting.
    Under Appearance and Personalization, select the Display Aero desktop effects.
    In the Troubleshooter dialog, click the Advanced link and place a
    check mark in the Apply Repairs Automatically option.
    Click Next to run the troubleshooter.
    Let us know the results.
    Thank You for testing Windows 7
    Ronnie Vernon MVP

  • Update to 10.6.8 and HP F2100 and D2400 Printers stopped working. Restored 10.6.7 and printers from Install CD's but not working,  Same with scanner

    Help....
    Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
    Restored 10.6.7 and printers from Install CD's but not working.
    Same with F2100 scanner
    Am I glad I kept Windows desktop as without it I would be scre**ed now
    What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
    On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
    Steve

    None of those things you mentioned were what I suggested.
    I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
    If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
    But, if HP has a fix, it likely needs to update its drivers.

  • Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?

    I hope the title is enough info, please ask. In the mean time I have created an applescript to open preferences/ sharing and uncheck then check the file sharing box. This works but I would obviously prefer it just work normally. I have no corrupt preference files. Perhaps a file is missing? Thank you.

    Greetings Kwnez
    I'm not up to your level of expertise yet. I'm networking and file sharing too, on my Mac Powerbook 1.33 GHz PowerPC G4; OS 10.5.8 Lepoard. At the public library I found by asking the clerk a book Authored by David Pogue. "Mac OS X Leopard the Missing Manual". It (the book) has helped me ask better questions. I'm not saying that your question "
    Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?
    is hard for me to understand, I went to system preferences and looked at the sharing box. when I clik it it opens up and the first thing I see is my computers name, and under that i see, " Computers on your local network can access your computer at: ...-powerbook-g4-15.local"
    What I'm saying is "Are we on the same Page"

  • Isdn bchan-number-order ascending round-robin is applied but not working

    isdn bchan-number-order ascending round-robin is applied but not working
    ios c3825-spservicesk9-mz.124-21.bin
    relevant config
    controller E1 0/3/0
     framing NO-CRC4
     pri-group timeslots 1-31
    interface Serial0/3/0:15
     no ip address
     encapsulation hdlc
     no logging event link-status
     no snmp trap link-status
     isdn switch-type primary-net5
     isdn overlap-receiving
     isdn incoming-voice voice
     isdn bchan-number-order ascending round-robin
     trunk-group 1
     no cdp enable
    my problem is this:-
    At the moment calls are leaving on the first available channel of my h323 voice gateway PRI, I can apply this command to the interface fine but it makes no difference the b cannels are always being picked on a first come  first served basis . I have also tried combination "isdn bchan-number-order decending" and "isdn bchan-number-order descending round-robin" but it makes no difference , the first b channel is always selected .
    Any ideas , if you think its a bug can u identify the bug id as I cannot find it .

    Hello
     I can see that you use ascending , that why you hit 1st channel.You have to choose one of these commands ascending or descending
    I have a question here , for your incoming calls which channel hits ?.FYI isdn bchan-number-order descending is enable by default , so if you need to change you have to type ascending. Can you just share incoming calls which channel hits?.This is because before you define your outgoing calls , you have to check your service provider channel used, and this to avoid error channel is not available.
    Command
    Router(config-if)# isdn bchan-number-order {ascending | descending}
    Purpose
    Enables B channel selection for outgoing calls on a PRI interface (optional).
    Thanks
    please rate all useful information

  • DragAcceptFiles Working in Windows 10 TP build 9926 But Not Working In build 10049 and build 10061

    This is a cross post from
    https://social.technet.microsoft.com/Forums/en-US/a63519d4-ba7a-46c1-bb34-ad034b836964/dragacceptfiles-working-in-9926-but-not-working-in-10049-and-10061?forum=WinPreview2014General.  The moderator suggested I post this here:
    My company has a software product that accepts dragged items.  In all versions of Windows from XP through Windows 10 build 9926 that functionality has worked fine.  However, with build 10049 (possibly 10041 which I did not test thoroughly before going
    to 10049) and now 10061 that functionality stopped working.  The application calls DragAcceptFiles to enable drag drop messages.  In addition, either ChangeWindowMessageFilter is called on Vista or ChangeWindowMessageFilterEx is called on Windows
    7 and higher for the messages WM_DROPFILES, WM_COPYDATA, and WM_COPYGLOBALDATA.  This was working fine on Windows 10 build 9926.  Now when I attempt to drag an item to our software product, I get the "Don't" symbol (circle with line through
    it) and no WM_DROPFILES messages are received.  The application is unchanged with only an upgrade to the Windows 10 build performed.  As a sanity check, I created a brand new VM running build 9926 and the functionality worked fine.  I then upgraded
    the VM to 10049 and it stopped working.  The following day I upgraded to 10061 and it is still broken.  Is there are new filter or restriction in place since build 9926 on DragAcceptFiles that would be stopping the traditional drag drop procedure
    from working? This is very frustrating because there is a dearth of information on Windows 10 API changes and since this appears to be some kind of recent change, I am out of ideas of where to look for answers.  I can duplicate this problem on the older
    platforms by simply calling DragAcceptFiles with the second parameter set to false.  In that case, on Windows 7 for example, I will get the "Don't" symbol just I am getting now in the Windows 10 TP with the argument set to true.

    DragAcceptFiles is now working again in 10074 so whatever the problem was, it has been fixed.

  • TS3367 I have a iphone 5 ...when I face time someone with a iphone 4s....I can see them and hear them but they can not see me. They can hear me but not see me.

    I have a iphone 5 ...when I face time someone with a iphone 4s....I can see them and hear them but they can not see me. They can hear me but not see me. what is the problem....

    diesel vdub wrote:
    Was the device actually unlocked by Verizon?
    Just FYI, diesel, per an agreement between Verizon and the FCC which allowed Verizon to buy additional spectrum, all Verizon-model iPhone 5, 5C and 5S models are already unlocked.
    Regards.

  • I am tring to start work I masseg and facetime on my I pod touch  4g on IOS 6 but not work with my apple ID can you help my

    I am tring to start work I masseg and facetime on my I pod touch  4g on IOS 6 but not work with my apple ID can you help my

    Maybe here. You are not really provided much information like what happens when you try.
    iMessage won't work after iOS 6 upgrade: Apple Support Communities

  • Internet showing up but not working iTouch 4th Gen

    Help my Internet connection Is showing up but not working. it happens when the Internet goes off the router then resets it self which it for everything except my iPod :( Please help we've reset it again :( but no luck

    Please help does anyone know what to do?

  • USB Devices Recognized but not working!

    Having issues with working USB devices, but only some...??? Very confused. Here it is:
    - 20gig ipod, ipod mini all recognized by apple system profiler and working (shows up on desktop) Through USB and firewire
    - Canon Rebel XT (USB 2.0), Macally mouse(USB 1.0), RECOGNIZED in apple system profiler...but not working!!! Iphoto doesn't recognize a camera is connected and mouse not responding
    The camera in mouse i tested in another mac and they are working.
    If my logic board is cooked, then why would the ipods still work?? So, what is the problem???? PLEASE HELP
    luc

    Luke, many of the peripials such as cameras, printers, scanners, some will plug right in and work.
    Others, need to plugged in and restart your computer,for them to work.
    and last but not least some need there own drivers to operate correctly.
    Those that need drivers normally come with an insallation CD for this purpose... Cheers...Don

Maybe you are looking for