"What U Hear" option not available when installing Audigy 1 web drivers, was available bef

Hello, on the current format of my computer I only installed the latest version of the drivers off of the support website and did not install from the cd that came with sound card. Under Sound Recording from sounds and audio dvices in control panel I can only select SB AUdigy Audio [E400]. Before I remember being able to select "What U Hear".
Was this left out of the web drivers? Is there anyway to get it without isntalling original driver cd?

coldpenguin,
I can't recall much info for the Audigy but see if the option is listed in the properties setting. Open sounds and audio devices and go to audio tab. Click at Volume button of the 'Sound Recording' column. Now click on Options->Properties. Do you have that option listed?
Jason

Similar Messages

  • What I Hear is NOT What I Get when I export

    I finally learned how to create a multi-track song in GarageBand 2. I spent hours getting it the way I wanted it -- and it sounded great -- Then I exported it to iTunes, and when it played there, the tempo was much slower than it had been when I played it in GarageBand. Also, some of the tracks were off in terms of timing.
    To make matters worse, when I then go back to listen again to the song in GarageBand 2, it is screwing up there, too -- all this despite the fact that the song played perfectly (in terms of tempo and being in sync) the last time I played it PRIOR to exporting it to iTunes.
    Can someone tell me why What I Hear is Not "What I Get" with Garageband? and why it's mucking up the final version of my songs when I export them to iTunes.
    Thanks
    iBook G4   Mac OS X (10.3.9)  

    Hi,
     Does this happen when you try to type in a message ? Did u check in the Active Notes, Contact, Office applications etc. ?
     Also check what is the language set in the Message Editor settings.
    Regards
    Ashish/-
    Ashish/-

  • "What u Hear" does not work (SPDIF)

    - Hi!
    "What u Hear" option doesn't work after I changed the output to SPDIF. The question is, how i could record sound that goes through my audio card (X-Fi Xtreme Gamer).
    In windows' recording tab are these options for recording:
    Microphone
    Auxiliary
    Line-In
    What u Hear
    Pls help
    I have win 7 ultimate x64 as OS.

    new new VisRe: "What u Hear" does not work (SPDIF)Y I have exactly the same issue. When I originally got my new Vista PC, 'what you hear' wasn't available. It became available when I installed the new driver, as indicated here:http://support.creative.com/Products/ProductDetails.aspx?catID=&CatName=Sound+Blaster&s ubCatID=208&subCatName=X-Fi&prodID=4066&prodName=X-Fi+XtremeMusic&bTopTwenty=&VARSET=prodfaq:PRODFAQ_ 4066,VARSET=CategoryID:
    However, If I open 'Smart Recorder' for example, I can select 'What yiou hear (Creative SB X-Fi)' as an option, but hitting record doen't record what is playing on the PC. So it doesn't actually seem to do anything...
    ...unless anyone knows different?... Is there a setting I missing? Everything looks fine in the 'Recording Divices -> Record' tab...

  • Sound Blaster X-Fi Titanium... no "what you hear" option

    This is my second system with this sound card.
    My last one, when I wanted to record off the air or off my sound card there used to be a drop down called "what you hear" for your source in.
    Where did it go?
    I can still record on the go but I have to make a couple changes to the setup.
    Also, did this used to safe your files to .mp3's ?
    ...anyway, I'm looking for the ''what you hear" option in my recorders.

    Thanks again.. where do I find the applications that are available for this sound card?
    Is there a webpage that contains these, if so, could you direct me to this?
    The Sound Bank is installed and I do have the virtual keyboard now, thanks.
    I can't hear it for some reason, I'm pretty computer savvy and I can't think of anything I did wrong. I mean all I did was download and installed a driver.
    Thanks

  • CS3 Postscript fonts not visible when Installed with Suitcase 11.0 Vista Ult64

    CS3 Postscript fonts not visible when Installed with Suitcase 11.0 on Vista Ultimate 64bit.
    Truetype and Opentype work fine. I have searched through all the forums here multiple times, but not found a solution. The only workaround I found was to manually put the font files in c:/ProgramFiles(x86)/CommonFiles/Adobe/Fonts.
    When I put any font files in that folder, they show up in CS3 for use, but not in windows apps. I thought I would make a permanent work around by placing all of my uninstalled font files in that folder, then use suitcase to install them from there. That didn't work because EVERY font in that folder is available to CS3 and turned on. Do they get installed when you put them in there?? It didn't seem like they were installed, and windows apps didn't see them.
    These are workarounds anyway. My main goal is to have suitcase work so I can organize my fonts efficiently. Extensis blames the font and CS3. I have read that there are adobe issues with other font management software as well as suitcase. Any help would be appreciated.

    Got mine FIXED here is what i did:
    Windows 7 64bit SP1, CS 5
    Postscript fonts (comprising of *.pfb + *.pfm files) did not show up in any CS5 app, but showed OK in Word, Excel, Notepad etc.
    Tried  activating through Suitcase Fusion 2 and also through FontExpert 2009 -  but neither of them made the fonts visible in CS5 apps
    1) open Start Menu/Control Panel/Fonts
    2) on the sidebar there is "Font settings" item
    3) set the settings as i did
    [    ]  Hide fonts based on language settings
    [ x ]  Allow fonts to be installed using a shortcut (advanced)
    FIXED mine,
    now i can use Suitcase Fusion 2 to install any PFB/PFM fonts without any problems...
    PLEASE IF THIS WORKED FOR YOU TOO, LEAVE A MESSAGE HERE SO OTHERS KNOW IF THIS FIX IS 100% WORKING

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

  • Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

    Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

    See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
    Clinton

  • How to get WHAT U HEAR option for PCI Express X-Fi Titanium sound card and Windows 7

    how to get WHAT U HEAR option for PCI Express X-Fi Titanium sound card and Windows 7 ? Is it on the basic driver? or do you have to install some other software?
    jane

    You have to install the rest of the software(s) for the sound card. The software is (if it is with the installation CD, though) called "Creative Smart Recorder" or something like that.

  • Cs12 trial not responding when installed, windows 7 64bit...how to fix??

    cs12 trial not responding when installed, windows 7 64bit...how to fix??
    Not a very good recommendation for buying the app!!!!
    Does anyone at Adobe follow these questions???  If so please respond (your app will not!!)

    Hi wcarlstrom,
    Adobe CS12 is unheard of. Adobe Creative Suite's latest version is CS6.
    Please be specific as to what software you are trying to install, OS version etc so that I may be able to help you.

  • SQL*Loader-971: parallel load option not allowed when loading lob columns

    Hi,
    I am trying to load a table, which has a VARRAY column, using DIRECT=TRUE and PARALLEL=TRUE through
    Sql *Loader 10.2.0.4.0
    OS: Sun Solaris 10 SPARC 64-bit,
    Database: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
    The following error recieved:
    SQL*Loader-971: parallel load option not allowed when loading lob columns
    Please help me to resolve..
    Thanks and regrds
    Anji

    user8836881 wrote:
    Hi,
    I am trying to load a table, which has a VARRAY column, using DIRECT=TRUE and PARALLEL=TRUE through
    Sql *Loader 10.2.0.4.0
    OS: Sun Solaris 10 SPARC 64-bit,
    Database: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
    The following error recieved:
    SQL*Loader-971: parallel load option not allowed when loading lob columns
    Please help me to resolve..
    Thanks and regrds
    Anjihttp://tinyurl.com/yhxdhnt

  • What does error code 50 mean when installing the creative cloud app?

    what does error code 50 mean when installing the creative cloud app?

    Hello,
    This thread may help
    Error code 50
    Let us know!
    Regards,
    Jo-Marie

  • HP Deskjet Ink Advantage K209a Driver not found when installing windows 8

    MY  PRINTER " HP Deskjet Ink Advantage K209a"  OPERATING SYSTEM  Windows 8 32 bit
    Driver not found when installing windows 8 .So,please give me a suggestion & give me new driver for win 8.
    [Personal Information Removed]
    Please give me a suggestion

    Hey 101214,
    I see you have a Windows 8 PC and a Deskjet Ink Advantage All-in-One printer (K209a).  I also see that you need a driver link for this OS and Printer.  Please follow the link below to download the driver for this printer/OS combo.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109242-1&cc=us&dlc=en&lc=en...
    If you need information on how to perform the USB installation on your Windows 8 PC please click here.
    I wish you the best!
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Not Able To Install Nvidia Graphics Drivers

    Hello all!
    This past week I just finished putting my new system together with a K8N Diamond Plus. Only major problem right now is i am not able to install Nvidia's drivers. Below are my components...
    XP 64-Bit Edition
    MSI K8N Diamond Plus
    AMD Athlon 64 X2 3800+
    BFG 7900 GTX 512MB
    1 Gig Coirsar Ram
    2 Wester digital HD in Raid 0
    When I try and install the graphics drivers i get the message " The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit."
    I used the chip set drivers listed here: http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=710&kind=1
    Also I have tried the ones from NVIDIA's site: http://www.nvidia.com/object/nforce_nf4_winxp64_x16_6.83
    The graphics drivers i used are from NVIDIA's site: http://www.nvidia.com/object/winxp64_81.98.html
    BFG Tech support guy had me look under display adapters in device manager. It only has Standard VGA Graphics Adapter listed. He said I did not have my chip set drivers installed (though i have), or the motherboard was not recognizing it. Also he said they do not support XP-64 and would not offer me any more support so long as i run it.
    I just can not believe that XP 64, 7900 GTX, and this great K8N Diamond Plus can not get along.
    Any advice anyone has for getting my Diamond Plus and my graphics card to jive together would be greatly appricated.
    Thankyou all!!

    Thankyou guys for the responses. I was able to find drivers that worked with my card here..
    http://www.laptopvideo2go.com/index.php?drivers&series=80&os=2&type=1&dir=1
    Now my only current issue left is that I have no sound. It is enabled in the BIOS, installed the 64-bit drivers from MSI site, tired installing drivers off disk. Any suggestion?

  • Not able to install SAP Web Application Server -6.40

    iam running on SAP NETWEAVER Studio 6.0.21 in Windows XP  operating System , not able to install  SAP Web Apllication Software -6.40 .
    iam not sure what to choose(while Installation) central system or distributed System ,i have tried in either way but
    still not able to install the software .
    If i go with Sap System Installtion>Java System >Distributed system>Java Central Instance installation  ,it throws me getJavaHome was executed with status error ......
    then ,
    what is the version of Sap Web Application Server to be installed if my system runs on
    SAP NETWEAVER Studio 6.0.21 or 6.0.11
    cheers
    Sundar

    Hello,
    What do you want to do exactly?
    You speak about SAP Netweaver Studio? I suppose you mean Netweaver Developer Studio?
    Do you want to install a complete SAP System on your windows XP?? or only the Java part?
    Thanks to give us more info
    Olivier

  • What stub code does APEX uses when making a web service call ?

    What stub code does APEX uses when making a web service call (manual web service reference)
    I am using APEX (which was part of the 11g installation).

    Hi Steve,
    Some options for the same issue:
    web service time out
    How to check for Web Srvice Timeout in ABAP Proxy call
    Regards
    Vijaya

Maybe you are looking for

  • How do i updates itunes on a macbook pro 2009 10.5.8 to newer 10.6.8

    Hey guys i hope someone can help me. I recenlty brought an older model macbook pro 2009 with itunes 10.5.8 on it. for a great low price of $ 300 dollars. How ever i cant update a newer version of itunes to replace the 10.5.8. So everytime I plug my n

  • F-28 - Incoming payments with residual items - Vat code

    Dear all, I need to define a process in which the user can create a residual item for a downpayment on an incoming payment from a customer, and the system automatically creates a new document with the residual posting. I have done the customizing for

  • Where to start central instances for central adaptor engine

    hi all,   in integration directory under cache notifications for central adaptor engine (central instances) are  stopped. please how can i restart the cache instances. regards, krushi

  • Is there a way to download specific base files from pacstrap base?

    Lets say I tinker with something and mess up the file. I can of course redownload the entire base files using pacstrap, but is there a way to just query a specific file and download that? Lets talk about fstab for a moment. I ran the script # genfsta

  • Backlit keyboard for non backlit laptop

    Hey! I have HP Notebook - 15-r204tx laptop.I want to replace its keyboard with backlit (glowing) keyboard. Can you help?how much will it costs? Where can I get that keyboard ? PRODUCT NAME : HP Notebook - 15-r204txPRODUCT        ID : K8U04PA#ACJ