What update site flexPMD plugin for FlashBuilder 4.6 ? and login/password to get it from SVN ?

Just thought I'd answer here to tell you what's going on around FlexPMD.
FlexPMD has been donated to the Apache Flex project and has been sitting there since then. In invested quite some time to find out if we would release FlexPMD soon. Even if if does work when using the Ant target the Maven part is completely out of date and I didn't manage to get things working in reasonably up-to-date Maven versions. It seems that FlexPMD had been a fork of the original PND which hasn't been updated for a really long time. Instead of fixing and updating FlexPMD to work on Maven again, I contributed a patch to PMD that helped modularize PMD 5.2. This has been released recently and even the maven-pmd-plugin for that version have now been releases. So this version allows to create a Flex language module for the official PMD system. Hopefully with this we'll get a well maintained PMD core to work on top of.
Unfortunately I had to finish some other things first, but I do have this on my radar next. So please subscribe to the flex user list and you'll be kept up to date on any progress.
Chris

Similar Messages

I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?

I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?

The 2nd generation can not be upgraded beyond 4.2.1.

I am trying to get minecraft for my iPod touch. When I put in my apple ID it says that I have to verify that I can buy it. I click ok I pulls up a site ask me for my apple ID and then I put in my security questions. After that it ask me some weird questio

I am trying to get minecraft for my iPod touch. When I put in my apple ID it says that I have to verify that I can buy it. I click ok I pulls up a site ask me for my apple ID and then I put in my security questions. After that it ask me some weird question like Who Is your favorite teacher and another question like what is your least favorite car model. I did not set those as my secure questions. So can u please help me

Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions

Is there a plugin for CS6 that I need to download to get my HP Officejet 7612 Wide Format Printer to be compatible with my MacBook Pro that is running my CS6 program?

Is there a plugin for CS6 that I need to download to get my HP Officejet 7612 Wide Format Printer to be compatible with my MacBook Pro that is running my CS6 program?

HP Officejet 7612 mac updated drivers. You can download link.

I had just updated the facebook app for my ipod touch and now it wont even open, i have tried to restart the ipod and to re download the app several times any help? thanks

i just updated the facebook app for my ipod touch and now it wont open and i tried restarting the ipod and also re downloading the app several times and nothing.. any help? thanks!

jflight007 wrote:
but some of my music was no purchased from itunes so that will all be lost though right?
ALL of your music should be on your computer in itunes. Is it not?
How did it get on your ipod in the first place if not from your comptuer?
Everything on your ipod should be on your computer and you should be syncing regularly.

What are the classes used for bropdownListBox in BSP and purpose and how

what are the classes used for bropdownListBox in BSP and purpose and how
thank you,
Regards.
Jagrut BharatKumar Shukla

Benje001,
Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
Hope that helps!
Regards,
Shannon R.
Applications Engineer
National Instruments

What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.

Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

i reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

Click here and use Apple's iForgot service, or contact their Account Security team, or if you're the device's original owner, take it and its purchase receipt to a physical Apple Store.
(124525)

I have macbook pro i got it from craiglist, when i was updating the oprating sestem its asking me for sestem unlocking pin? where can i get it from?

i have macbook pro i got it from craiglist, when i was updating the oprating sestem its asking me for sestem unlocking pin? where can i get it from?

I would recommend wiping the system and reinstalling the OS for any used system. OS X does not have any "unlocking pin" of sorts so this may be from some third-party software on the system. The system does have a "firmware password" option that can be set to prevent booting to alternative boot environments (ie, external hard drives, safe mode, etc), but this will not prevent system updating.

What is the best subscription for use in US and Au...

I regularly travel between US and Australia. I have postal addresses in both locations and credit cards from both countries. So I can purchase from either location.
I want to be able to make calls to US land lines and Mobiles whilst in either countries. What is the best subscription for me to buy and in which country should I purchase it?
NOTE: I am not really concerned about calls to Australia. I don't make that many and so am happy to pay as I go for the Australian calls.

Probably best option would be Unlimited US&Canada subscription, which you can get if you are located in US.
It will be displayed here: http://www.skype.com/go/subscriptions
If you are outside of US or Canada then this subscription is not offered.
It doesn't matter where you are located when placing calls, but with subscriptions it does matter where you are when purchasing.
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

Can you tell me what is a pass code for re setting program and where can I find it?

Can you tell me what is a pass code for re setting program and where can I find it?

For resetting what program? What are you trying to do? When you have a problem, please provide enough info to answer.
 Cheers, Tom

What are the config steps for contract mass change and quota arrangement?

Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj Kumar

Process Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
       1.      Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
       2.      Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
       3.      Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
       4.      Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

What's that command again for moving a track and the pan automation?

What's that command again for moving a track and the pan automation together?

It's not a command but a menu item: "Lock curves to tracks".

Why has Apple decided that online orders for Macbook Air display and speak VO when first opened from the box? I"m guessing 1%or 2 % of your customers know what it is or want it.

Why has Apple decided that online orders for Macbook Air display and speak VO when first opened from the box? I"m guessing 1%or 2 % of your customers know what it is or want it.

You are not talking to Apple, we are just users like you. Only Apple knows that answer.

What could be the reason for Crawl process to take long time or get in to a hung state.

Hi All,
What could be the reason for Crawl process to take long time or get in to a hung state? Is it something also related to the DB Server resources crunch? Does this lead to Index file corruption?
What should be the process to be followed when index file is corrupted? How do we come to know about that?
Thanks in Advance.

"The crawl time depends on what you are crawling -- the number of items, the size of the items, the location of the items. If you have a lot of content that needs to be crawled, it will take much time".
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f4cad578-f3bc-4822-b660-47ad27ce094a/sharepoint-2007-crawl-taking-long-time-to-complete?forum=sharepointgeneralprevious
"The only clean and recommended way to recover from an index corruption is to completely rebuild the index on all the servers in the farm."
http://blogs.technet.com/b/victorbutuza/archive/2008/11/11/event-id-4138-an-index-corruption-was-detected-in-component-shadowmerge-in-catalog-portal-content.aspx
Whenever search index file got corrupted it will got the details to Event logs
http://technet.microsoft.com/en-us/library/ff468695%28v=office.14%29.aspx
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

What update site flexPMD plugin for FlashBuilder 4.6 ? and login/password to get it from SVN ?

Similar Messages

Maybe you are looking for