What upgrade graphic card do i need for a early 2008 mac pro

I have a early 2008 Mac Pro. ATI Radeon HD 2600 XT 256 MB is what i have now. What is a good upgrade graphic card to get.

The GTX 780 6GB runs fine on the dual PCIe internal power cables -- as does the GTX 680 and Radeon HD 7950. The same can't be said of the GTX TITAN or GTX 780 Ti or Radeon R9 280X -- all of which require an auxiliary power feed to avoid a nasty power down of your tower at the worst moment when too much wattage is demanded of the Mac Pro's factory power supply.
Did I mention that the GTX 780 with 6GB of GDDR5 matches the 6GB of GDDR5 in the TITAN?
The one fallacy to my 'sweet spot' award has to do with OpenCL. In case you hadn't noticed, the AMD Radeon GPUs smoked the NVIDIA GeForce GPUs running Photoshop's OpenCL accelerated Iris Blur filter and rendering LuxMark's OpenCL accelerated Room scene.
- http://www.barefeats.com
So depends on budget, whether you want a PC card for less but no "early EFI boot screen" prior to drivers loading, and what apps and needs you have.
The one thing for sure is that 2600XT should have been retired ages ago and even more so with 10.8.3 and above, it could be trouble or just... PITA/POS.

Similar Messages

What is the best Video Card I can get for an Early 2008 Mac Pro?

What is the best Video Card I can get for an Early 2009 Mac Pro3,1?

A 3,1 is "Early 2008" with DDR2 FBDIMMs, Intel 54xx Harpertown, and not 2009 Nehalem with DDR3.
http://www.barefeats.com bench tests. A 3,1 does not improve as much due to its old PCIe 2.0 implementation for one thing.
"Best" is hugely subjective. For what? cost versus performance and whether you need CUDA support or AMD - dual AMD's for FCP-X for instance.
I think GTX 970 right now is close to "best".
And of course shop here:
http://www.macvidcards.com

I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations? Thanks.

I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations?
Thanks.

BlackList:
Final Cut Pro X, Motion 5, Compressor 4: Graphics card compatibility
WhiteList:
Final Cut Pro X, Motion 5, Compressor 4: Using OpenCL-enabled graphics cards
OpenCL graphics cards available now, for any Mac Pro model, for a reasonable cost:
Apple 5770 US$250 Avail: in stock
Apple 5870 US$450 Avail: 2-3 weeks

Need help with graphics card options for an early 2008 mac pro

Hello,
   I have an early 2008 mac pro with 2 x 3.2 GHz quad core Intel Xeon and 6Gigs of ram, currently running with an Nvidia Geforce 8800 GT with 512mb.
    It is also running 10.7.2.
   I would like to either add a video card on top of the one I am currently running or replace it completely if necessary.
   I do video editing on the Mac, no gaming and only a small amount of photoshop, and as the resolutions get larger I would like to have my machine keep up.
   My questions are,
     1. What cards would you the community suggest?
     2. Can I add a whole other card to my system or do I have to replace the current one?
     3. If I can hold two cards what special accomidations would be needed in regards to final cut performance if any?
    Thank you for any help you would like to give.
Rob

The two main cards for mac pros are the apple versions of the ATI Radeon 5770 and 5870.
The 5770 requires one aux power adaptor and the 5870 requires two. So generally you could only have one 5780 or two 5770's.
Video cards which don't require aux power should be able to coexist with these cards so log as it's all within the power supply maximums of course.

Compatible graphics cards for the early 2008 Mac Pro 3,1?

I have an early 2008 Mac Pro 3,1 with the 2.66Ghz Quad core processor that is running Lion. I had an ATI Radeon Card in there that didn't last very long (I've read not great reviews about them recently) and now I need a replacement that will be compatible with my system and that will last me longer than my previous card did. The problem is I don't know what my options are. Can anyone reccomend me a viable replacement? I do video/audio production so something high end would be nice.
Thanks,
-RH

There are some good ideas, comments and tests just how much difference and in what applications.
The differences between 2.5GT and others are less than you might think.
There is no-compromise performance for some areas of CS6 and CUDA with ML and GTX 570 or above. The new EVGA GTX 660-Ti FTW w/ 3GB $330 looks to be very popular and that is the "mid-range" today, compared to $400-500 where GTX 680 sits or ATI 79xx series.
If you have to use 10.6.8 that is a bigger factor and some cards require 10.7.4 or later.
The 5x70 were average cards when they came out. There is no reason to have a system where early boot is totally dependent upon firmware and couldn't do basic video. Anyway some people are willing to swap out the 5770 and keep it just for debugging.
As to the original question: can't tell if you were interested in asking if a MacBook Pro Retina or something else... kind of hard to argue. A 12-core 3.33GHz with 48GB and 5 internal hard drives - it is hard not to do whateer you throw at it esp. if cost is not the primary concern but work is and it is suppose to pay for itself.

Where and what type of solid state drive should I buy for my early 2008 Mac Pro Desktop??

where can I buy and what type of solid state drive should I use to upgrade my early 2008 Mac Pro Desktop??

Rick,
When you get a chance.... DSLReports is off line: their SQL server decided to take its indexes and access to data. Power. Not enough of the right kind of UPS. Same happened to StorageReview's "Drive Reliability Database" about 8-9 yrs ago.
dslreports.com is offline
Fri Apr 20 09:05:55 EDT 2012
SSD: Loading CS5 plus other little monsters might matter.
Lots of small I/Os
latency of 1/100th where nanoseconds replace those "long" milliseconds
System: Small and fast.
DLLoyd even goes for short-stroking drives to get and maintain highest I/O
The new 10k VRs hit 200MB/sec - I still use them and still find them useful, long lasting, feel responsive with whatever I ask of them. I know they get criticized and "cost too much"
Just bought a new WD Black and yes it is better than the 2008 model I was using.
600GB 10K $200 vs $150-220 for WD Black. your choice
I can destroy a 7.2k drive, I have brought ever 10K drive back after a simple WD Extended Test in Lifeguard.
I don't really care about $$/GB or I wouldn't have just bought Intel 128GB $149
Database: the pros put the index in memory and page fix (virtual volumes in memory; cache; hold disk drive index in memory). Caching storage has been around for almost 40 yrs.
Today you can use SSDs as front end cache to hold DB indexes and frequent data for web servers and such adn use slower secondary storage.
SSD + SAS + 4TB storage
Separating the system from data: #1 must
Having data on array: been what I use
I put a large photo library on 2 x 10K VRs vs SSD and couldn't tell much difference (SSD is soundless of course) But my WD Blacks make as much noise and run 15*C hotter than those 10K (not what you expect?)
While 10K and 7.2K are in the 140-180MB/sec range, they are in 3.0 to 12.0 ms seeks, not 0.01 ms.
People wonnder why shrink a drive to 2.5" (or why not go down to 1.8".
How long does it take to reposition a disk head? how often? the 10K VR travels on outer tracks at 70 MPH. Really trying to fly off into space.
It uses one step to find the "zip code" and then another DSP to find the "house."
True of any high density perpendicular recording mechanism.
And of course while the Raptor-X tried to find a home with famers, Cheetah buyers, the WD 10K line has more of a home where servers and small form factor drives - and 100s of them - can fit in a rackmount server I imagine.
Anyway.... if SR and DSLReports can drop out of site due to power and hardware failure and loss... we can learn some and hope to protect our own data and investments.

What is the best video card for an Early 2008 Mac Pro

I have an early mac pro with a solid state drive. I use Adobe CC 2014. The old video card is not working. I loaded Yosemite and have bad problems using Prem Pro CC.
Any suggestions on the most suitable video card?

We love it when people want us to guess what video card and other items you have .... price is no object of course right.... and you want CUDA? so that means a GTX this time instead of what you have (5770 upgrade? no, the original 2600XT that really should have been ditched long ago).
Yosemite also makes more demands on the GPU.
The GTX 680 Mac Edition EVGA would be the first, though people are using even newer graphic cards in the Nvidia line.
New Nvidia GTX 970 and 980 - cMP? ( 1 2 3 4 5 6)

I have an early 2008 Mac Pro, 8 gb ram with a Dell 27" display and a 42" LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs. Does anyone have any suggestions on the best card?

I have an early 2008 Mac Pro, 8 gb ram with a Dell 27” display and a 42” LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs or 1 dvi and 1 vga vs 1 dvi and a mini. I don't do a lot of Final Cut Pro, gaming, etc. I am interested in best value for the graphics card.
Does anyone have any suggestions on the best graphics card for these larger displays for the best value?
Thanks,
Kevin

I recommend you install nothing older than the Apple-firware 5770, about US$250.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

I have an early 2008 Mac Pro, which has re-booting problems. Also what does the spinning beach-ball indicate?

Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
Robert

When you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Early 2008 Mac Pro for home use

Hello guys,
I've been using usual Windows PCs at home (watching movies through HDMI, playing a few games - Counter Strike and random racing games), browsing internet, working in PS and Light room etc, but mostly for watching HD movies. But I was able to get myself Early 2008 Mac Pro - 10gb memory, two dual core intel xeon processors, 256 Ati Radeon graphics cards and 1tb ssd hard drive. Now I wanted to know how good is Mac Pro for home use? As I said I don't do many things with my windows based PC and wanted to switch to faster, quieter mac pro. Any opinions? How good it is as a home entertainment center?
P.S. Counter strike is available now for Mac, so I don't really care about other games.

dump the 2600XT and there I would pay for a Mac Edition AMD 7950, else PC card
1TB SSD is unusual gift
even though 8 cores it is 6 yrs old and most things don't use 8 cores that much, it predates the i7-920,
USB3 has to be added if you want it or put USB3 on your LAN router is what I do.
It does not get the official nod of support from Apple for Windows 8/8.1 but it does if you want run 7 or 7 Pro (dual cpu support)
FBDIMMs have gotten better and cheaper if you want or need to, many do, often due to early death.

Purchased a early 2008 Mac Pro in 2010. Yesterday I updated my mac to System 10.9 and now I have a dialogue box in system preferences saying I need to update the NVIDIA CUDA drivers but the servers are unavailable. I download a driver from the site but th

Purchased a early 2008 Mac Pro in 2010. Yesterday I updated my mac to System 10.9 and now I have a dialogue box in system preferences saying I need to update the NVIDIA CUDA drivers but the servers are unavailable. I download a driver from the site but the Mac would not open it. This system has an ATI Radeon HD 2600 XT 256 MB graphics card. What do I need to do. Do I need a new Card?
David Rosenblatt
<Email Edited By Host>

Vista Ultimate 64-bit recognizes 8 cores. 32-bit recognizes one physical cpu.
I've had very little trouble in two years. And now I do like Windows 7 but also eager for the RC.
I've been using the latest Nvidia. There is a method to the madness of how to uninstall/delete and install graphics drivers, or madness in the method. The W7 drivers are easier.
Nope. Something else. More sensitive to disk errors. You aren't running a program to boost fans. Something.
And some AV software is more prone to causing trouble. But all you need is a good AV/malware program, and even Norton AV 2009 is acceptable, or Avast or one of the others.
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0

Will OSX support Adaptec PCI Express scsi cards in an early 2008 Mac Pro?

I need to move my scsi interface scanner from a G4 machine and the old PCI Adaptec AHA 2930 CU card won't fit. I was using Snow Leopard on the G4 unit - it still supported the Adaptec card and all was good. My 23" Cinema display then bit the dust and I replaced it with with a 24" Cinema display with the mini display port connector. I purchased an adapter from Kanex to make it compatible, but the adapter was defective - so I returned it. Their reviews aren't very good - seem to have a lot of D.O.A. adapters - not sure I want to deal with the frustration, but it would be the least expensive option.
I do have, however, an early 2008 Mac Pro that I can use, provided that it supports the newer PCI Express scsi cards that Adaptec makes. I'm not sure which one to get yet, either. I'd rather not buy one and find out it won't work. I can make a partition on the boot drive for Snow Leopard in case scsi isn't supported in later versions of OSX. In case you're wondering, I did use a scsi to firewire adapter to run the scanner on my laptop for a while - but it stopped working and I can't locate any replacements (or the company - 2nd Wave Technologies - for that matter). I haven't tried locating a scsi to usb adapter, but from what I can see, they are getting pretty scarce. I'd replace the scanner, but it is fairly pricey and the newest model retails at the price of a small car - so that really isn't an option at this point.
Thanks in advance for any info.
Message was edited by: Jakob Richardt
Changed name of display adapter manufacturer.

Thanks for the response - I guess the question I should have asked is "Will OSX support scsi cards in an early 2008 Mac Pro and if so, which ones?" I didn't realize Apple and Adaptec weren't working together - my G4 tower arrived with an Adaptec card in it when I bought it in 2000 (from a third party vendor, not directly from Apple). It came with either OS 8.* or OS 9. When I updated to OSX, everything continued working, so I didn't think much about it until I pondered using the Mac Pro for the scanner - at some point the G4 is going to stop working - need to have a solution before that happens. The manuals I've been reading refer to the slots in the G4 machines as PCI. The manual for the Mac Pro refers to the slots as PCI e. These slots have fewer connectors, so I thought that the "Express" part of the name referred to this particular card configuration when compared to the longer card connectors in the G4 type of machines.
Can you tell me what scsi card brands will work in the Mac Pro? I'd still like to pursue this option. As I mentioned in my original post, buying a new scanner isn't in the cards right now - it costs more than the computer, so, although pricey, the card option is still less expensive.
Thanks!

External desktop drives for early 2008 Mac Pro: USB 2.0 or 3.0 question

I have an early 2008 Mac Pro 3,1 (OS 10.6.8).
I currently have a 1 TB Fantom Drive with USB 2.0 that I use for the Time Machine. I want to get the second external drive to use as a boot drive so I can install & boot from Mountain Lion to use Maya 2014 3D application software that requires the Mountain Lion OS. For all other applications, I want to stick with Snow Leopard (10.6.8), which works well for me.
Most of the searches I've done for external drives have USB 3.0. Some have USB 3.0/2.0.
Questions:
1. Will one of the USB 3.0-only external drives work with my early 2008 Mac Pro 3,1, which is only equipped for USB 2.0? If so, would I need some sort of adapter? (I realize that the speed would still be USB 2.0 speed.)
2. Or do I need to get the USB 3.0/2.0 external drive (which is more expensive)? I am assuming this would not require any adapter.
3. Will I be able to boot from the external drive with Mountain Lion?
Thanks for any help with this.
S

First, many thanks to both Grant Bennet-Alder and The hatter for their fast responses to my questions. I really appreciate this information. Based on your suggestions I did some research in order to better understand the proposed solutions.
Grant Bennet-Alder wrote:
You can add a PCIe card to get these interfaces:
eSATA
USB-3
1. Does one need to get a separate PCIe card for each interface, or is there one PCIe card for multiple interfaces?
The hatter wrote:
Installing or cloning OS X should be done on SATA II drive bay or external and then moved to the PCIe - depends what card you buy, and some issues are with arrays (no need for system on one).
2. I went to http://www.everymac.com/systems/apple/mac_pro/faq/, which says, "By default, a single 3 Gb/s Serial ATA -- sometimes referred to as SATA 2.0 or SATA II -- hard drive is installed in the first of four bays for all models." I interpret that to mean that SATA II is a in the first bay located on my internal hard drive. Can I create a partition here and install Mountain Lion as a separate system, and then move it to a PCIe SSD?
3. Or, can I install it on my external Falcon Drive (which has a Partition Map Scheme : GUID Partition Table, and which, I believe means it is not a bootable drive). Following that installation could I then move it to the PCIe SSD and boot Mountain Lion from there?
4. Or, if partitioning is an option, can I just clone it to the Falcon Drive for backup?
My apologies for my ignorance. This is not my forte. Thanks for any help you can give.

Early 2008 Mac Pro-What type of HD? Smart failing?

I have an early 2008 Mac Pro and have two hard drives in it. The main system drive is a 2TB Western Digital drive I installed about a year ago. The 2nd drive is a 1TB Seagate drive which is the original drive that came with the Mac Pro.
When looking at Disk Utility a few days ago I realized the drive is showing up in Red and it's saying that SMART is failing. I've never had this happen before and like having a warning.
First Question:
When SMART shows up as failing can it be a false alarm or is it likely a definite sign of impending hard drive failure? When this happens, does the drive frequently fail quickly or does it take awhile? The fortunate thing is I back this drive up frequently to Time Machine.
Second Question:
What SATA speed does the Mac Pro handle? I see many hard drives that are 3.0GB/s and some that are 6.0GB/s. Does the Mac Pro handle the faster 6.0GB/s? If not, would they still work but just not at the additional speed?
I may consider upgrading to a 1.5TB or 2TB but figured I'll go with a Western Digital or Seagate drive. I see cache ranging from 16MB to 64MB and speeds at 5400RPM and 7200RPM. Between these two which is more important, large cache size or RPM's?
Thank you for your help.

Run WD Lifeguard (*Windows program or their ISO you burn to CD) is best and almost only reliable way.
If a drive has started to use spare blocks it is gone.
IT DOES NOT MATTER. Any 3.5" SATA drive is a drive is all SATA and mostly about features and specs. So just buy the newest size you need. 64MB cache and 7.2K (Green can have trouble on Macs and are more for backup and storing movies etc).
I recommend WD 10K VR newest 250GB 200MB/sec for system $152, and WD Black or Hitachi.
http://www.macperformanceguide.com likes 2-3-4TB.
Questions like this get asked unfortunately.
https://discussions.apple.com/thread/3908030?tstart=0
For every drive, you want to have multiple backup sets (clone and Tm) because drives and backups do fail and you want an alternate boot drive and to restore when needed.

Upgrading early 2008 Mac Pro

I work in animation, I have a Early 2008 mac pro. I am a motion graphics artist, I currently have a 2gb graphics card in the system but only 10gb of ram. Will I only see the best performance if I also max out the computer memory to 32gb of ram??

8 DIMMs are suppose to improve memory bandwidth by 15%+
SSD for system and for scratch, for photo libraries also helps - you have to watch for SSD PCIe controllers though and your free 16x slot for those.
Putting the system on SSD helps, and with 500GB $300 or half size for $160 and Samsung 840 EVO.
www.macperformanceguide.com

What upgrade graphic card do i need for a early 2008 mac pro

Similar Messages

Maybe you are looking for