What upload speed do I need to upload the XL photo books with over 25 pages?

I have just recently gotten a new Internet provider and the max upload speed I can get is 1mbps but I am only getting .4 mbps at the most.  When trying to upload an XL photo book with over 26 pages it keeps failing to transfer/upload and the error message says to check the internet connection.  I'm wondering what upload speed I need to upload?  I need to cancel this internet provider before my free month runs out if 1mbps is not going to be fast enough.

Well I have my first order coming in tomorrow (according to Fedex) and I have my fingers crossed.
So far I haven't been able to find any local printers that will print and bind the books at a reasonable cost - best I've found so far is $200 (or more) per book.
Hardly cost effective for my relatively meager budget.
I've explored Asuka a littoe more, and their quality does appear to be superior at first glance, but it seems I am not able to take advantage of submitting my aperture-generated book directly. According to their templates I have to put everything together manually in Photohop. Great for end-control, but one thing that made me pursue this was the ability to generate a book inside Aperture using versions direct from collection (any changes I made to an original image were automatically incorporated in my book. Had I done it all manually, teh time/effort I'd be putting into the book with be well over 5x greater!
I've also looked at shutterfly.com so far - and they seem promising, and am wiating for my colleagues order to go through before I get too excited.
Either way, I hope to have my first printing this week - I'll keep ya posted!

Similar Messages

  • What Download Speed Do I Need to View HD Movies?

    What download speed do I need to view HD movies on Apple TV?

    The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
    1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

  • I will give my laptop to someone else, how do I unlink my apple id? Do I need to remove the apps I downloaded with my id?

    I will give my laptop to someone else, how do I unlink my apple id? Is it just the app store unlink? Do I need to remove the apps I downloaded with my id? Will they get removed when I unlink my apple id?
    Are there any other procedures I need to take into account?
    Thanks

    You need to remove all software that you acquired from the Mac App Store, including newer versions of OS X. These are all registered to you and encoded with your Apple ID in the licensed copy. You cannot legally pass any of the software to the new owner, which is why Apple states to erase the Mac and return it to the version of OS X that shipped from the factory on the Mac. You must also remove any older Apple software that you installed by DVD or pass the DVD to the new owner with the Mac.

  • We just added a new iPad Air to our family of 4 apple devices and I can not get it to join the automatic Photo Share with the other 3 devices. What have I overlooked in set up?

    I added an iPad Air to our family of Apple devices a few weeks back and can not get it to participate in the auto Photo Share with the other 3 devices. My Mac, iPhone and first generation iPad share but the new device does not. ITunes sees all 4 devices but I can not get the new iPad and other 3 to share.
    Any ideas what I may have overlooked in setup? Thanks!

    Welcome to the Apple Community TM7555.
    Settings > iCloud > Photos > On. Photo stream isn't anything to do wither iTunes.

  • HT5219 I have a macbook air (mid 2012) and a thunderbolt display. Do I absolutely need to connect the power supply together with the thunderbolt cable ? I found that the screen won't wake up if only the thunderbolt connection is plugged.

    I have a macbook air (mid 2012) and a thunderbolt display (27''). 
    Do I absolutely need to connect the power supply together with the thunderbolt cable ?
    I found that the screen won't wake up if only the thunderbolt connection is plugged. Is this normal ?

    I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
    Good luck,
    Clinton

  • I need to set the position of components on a page that contains a MenuBar,

    I need to set the position of components on a page that contains a MenuBar, but MenuBar does not provide a getPreferred size method.
    How can I get the MenuBar's size in AWT?
    Thanks.

    A menubar is not a general component that is added to a frame like any another. It is the specific responsibility of the setMenuBar/setJMenuBar methods to deal with this.

  • I need to minimize the space photos take on my MacBook Pro OSx 10.7.  They are in iPhoto, Aperture, Pictures/Photo Library, etc.  Are they taking space in all of these locations?

    I need to minimize the space photos take on my MacBook Pro OSx 10.7.  They are in iPhoto, Aperture, Pictures/Photo Library, etc.  Are they taking space in all of these locations?

    Are they taking space in all of these locations?
    It depends on how you are using iPhoto and Aperture. 
    iPhoto and Aperture each create their own library files, and the default location for them is in /users/youruseraccount/Pictures
    You can configure iPhoto and Aperture to use the same Library file, in which case your photos are only stored once.  But if you are using iPhoto & Aperture with independent library files, you may in fact be duplicating your storage.
    The second consideration is whether or not you have configured iPhoto and/or Aperture as reference libraries, in which case their library files only reference photos you have stored in other places on your hard drive.  Setting them up as reference libraries does not duplicate the photos inside the library files.

  • I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the maste

    I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the master, and I cannot get the margins to alternate at print time. The larger margin is always on the left. Can anyone please help me on this, as I have spent hours and lots of ink.

    Set up as facing pages with a larger inside margin.

  • I need to change the phone number associated with my iCloud account

    I need to change the phone number associated with my iCloud account.  My home phone is being used and I need to change it to my cell phone since I am not home during the day.

    Welcome to the Apple Community.
    You can do that at...
    My Apple ID

  • What can i do when i try to order a photo book and the upload will not complete

    I have been trying to order a photo book thru iphoto and my computer crashes during the upload portion of the process.  Help!

    1 -
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    2 - if the preview is good boot into safe mode and order
    LN

  • What display settings do i need to change to use hdmi cable with macbook pro

    what display settings do i need to change to what tv and display my macbook pro with hdmi cable connected to computer.

    Well, if it's 1080p TV, then go into System Preferences > Displays.
    Sometimes you have to click on detect displays & a PreferencePane should appear on each display device for you to change the resolution.
    Also decide if you want it mirrored, or extended. And also move the display to the correct position for extended so you are moving the mouse in the direction of the 2nd display being the TV.
    Option + F1 = Brings Display preferences up immediately.
    Command + F1 or F2 = from memory that's the shortcut to switch back & forth between mirroring & extended.

  • CanoScan 9000F Mark II: HP or Dell what graphics card etc are needed to use the 9000F?

    My computer is not up to snuff to handle the 9000F scanner.  I am shopping for an HP or Dell unit.  What should I look for in the details to be able to select one that is adequate or better.  Sometimes a graphics card is indicated and I don't know which can do what though I know the one I have can't do it.  What about processors an i5 or i7 intel can do it  I think?. What hard drive capacity is required or recommended?  I am not a techie but would like to be able to purchase something that will get the job done.  I shall be scanning many slides, negs and photos. Thanks

    Hi EddS,
    The system that the CanoScan 9000F Mark II will be installed on will need to meet the following minimum requirements:
    OS Requirements (any OS listed below)
    Windows® 8, Windows® 7, Windows Vista®, Windows XP and Mac OS® X v10.6.8 to 10.9
    Power Requirements
    AC 100-240V, 50/60 Hz
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • What software/functions do I need to establish the communication between my C++ program and an instrument having only RS-232 (Singleton Cyclic corrosion Chamber CCT-10).

    I have Borland C++ 5.0 with NI-DAQ 6.9 driver for PC-LPM-16PnP, and want to synchronize DAQ initialized from C++ with a certain state of a Singleton CCT-10.

    You will need to use the RS 232 port on the computer, not the PC-LPM-16PnP. Use whatever serial functions Borland C++ provides.

  • What account info will I need to buy the data add on for europe

    Only know my mobile number will I need my EE account number when I buy the add on?

    You don't need any account info to buy roaming data when you are abroad, simply turn on data roaming and start browsing the net as normal. You will automatically be directed to the EE data roaming add-on page.
    EE automatically detects your mobile number and account info and charges your account accordingly.
    Do be aware that if you are in pay monthly, you don't see data roaming add-on charges until your next bill is issued.

  • Newbie: What version of WL is needed to use the experimental WL plugins?

    I've successfully installed and connected to 10.3.5 on jrockit r28, but am having trouble with 10.3.2 on r28. The WLDFDiagnosticVolume property is not available on the managed nodes, for example. I'm able to connect to 10.3.2 and see the JRockit JMX counters just fine, but I'm looking for the WebLogic WLDF JDBC counters in particular. They're not there. Is there a workaround for different versions of WL?
    And for kickers, my JR Mission Control installation seems to have developed some bit-rust, too. I was able to run "Help\Install Plug-ins... (Unsupported)" once and installed all sorts of stuff. Now, however, it won't work. It complains there are no features on the selected site and tells me to choose another one.
    Thanks for any guidance, including working links to help docs. :-)

    WLDFDiagnosticVolume is available only from WLS10.3.3, so that is the reason why you do not find this property in WLS10.3.2
    We do not have any similar properties for WLS10.3.2 as JFR (JRockit Flight Recording) is not integrated with WebLogic WLDF framework before WLS10.3.2
    The property and the features that use this property are all only introduced in WLS10.3.3, i.e., this property or a similar property will not be useful (not required) in WLS10.3.2 as no collection will use it
    Also, in-order to use JRockitR28.0 for releases older than WLS10.3.3, i.e., WLS10.3.2, WLS9.2MP4 etc.., we would need to apply patch#9884941
    Please do understand that applying this patch is to only fix a few WLS known product issues with JRockitR28 only. This patch will not introduce the WLDF integration features with JFR (WLDFDiagnosticVolume will still not be available with this patch). WLDF integration with JFR is a new feature that is only available from WLS10.3.3.
    Again, this is only required if you want to run WLS10.3.2 using JRockitR28.x
    Regarding the plug-ins, I have personally not tried it.
    But, it looks like you have installed all the plug-ins that were available on that experimental site. I believe that you might not have any further plug-ins that are available there for you to install.
    Arun

Maybe you are looking for