What UPS or AVR Does OS X Detect and Integrate with?

Hi. I think some UPS like the ones offered by APC support OS X software (OS X can detect and perform some stuff with it) using a separate (I may not have the USB slot for that anyway but I can make one free if that feature is really important). Are there any brands that supports OS X?
I'm not that interested in the UPS that has power backup coz' it's too expensive for the VA or wattage for my whole setupwhich includes other gadgets (like a Dremel, and 2 desk electric fans used for some crafts and hobbies) and it may not have as many as 8 outlets which I need. I'm more interested in a UPS brand that is as good as APC or even better at giving the iMac 27" i7 and the other gadgets quality electrict current. I already have a Belkin surge suppressor, do I only need an AVR (which might be too expensive) is the one I should combine the surge supressor with? Also I'd like to support smaller companies than APC that is as good (a kind of charity for the smaller but good companies to keep those smaller ones in business).
The maximum wattage all the gadgets including the iMac is around 635w (APC recommends in their calculator their UPS with 1000VA which is too costly).
I also read that we should avoid UPSes that only have a simulated or modified sinewave (the one to get should be the true sinewave but it's more expensive). What's the story on that?
I've seen other brands in order of availability AVR or UPS: FSP which seems to be designed in the US and is a US company, then there's Buffalo, Intex, Izuki, Voltac, Stac, Matsunaga, Stavor, Intex, Yaden, Cyberpower, Tripp-Lite,
Recommendations are welcome. Thank you in advance.
Gbu.

ummmm the problem is when i sync to Mobile Me my birthday dates change by a day (forward) e.g my birthday is the 8th and when i sync to Mobile Me and check online (www.me.com/contacts) my birthday date is ok, none of them have chage by a day
*BUT*
if i sync back down to another device it will change my birthday to the 9th. (even another mac, iphone, windows XP computer) all computers are set to New Zealand time zone.
(it always changes the dates of my birthdays every day of the week every time i sync. no error comes up it still syncs)
i dont think Mobile Me is offset. but i think in OS X it is.
so the time zone on Mobile Me would be +12 but the time zone in OS X would be offset so making +13
thats what im thinking in my head is that sounding right to you or am i way off haha
thanks for helping by the way.

Similar Messages

  • HT201320 When using an iPad Air, is it possible to have my email removed from the server after downloading it? That's what I have been doing on my PowerBook and I would like to use my iPad as my primary email reader now.

    When using an iPad Air, is it possible to have my email removed from the server after downloading it? That's what I have been doing on my PowerBook and I would like to use my iPad as my primary email reader now.

    OK, I found the answer in the mail settings under the advanced button.

  • What is the difference between the new ipad and ipad with retina display?

    what is the difference between the new ipad and ipad with retina display???

    This compares the two new iPads with the previous Retina iPad:
    http://www.engadget.com/2012/10/23/ipad-mini-vs-2012-ipad-whats-different/
    Regards.

  • How well does a Samsung Galaxy (Android) integrate with Mac OS?

    Hi, I'm wondering how well a Samsung Galaxy integrates with Mac OS?
    In terms of:
    -Address Book contacts
    -iCal calendars
    -Mail (dot mac mail account)
    -iTunes Music
    Is it possible to create a seamless experience?  Anyone doing this?

    Smart panel works OK for me on Lion but the printer is CLP325-w. (though only recently updated and Im pretty sure it was ok on the CLP315 too.
    To check status go to system preferences>Print&Scan and the check the options and supplies box. You should be able to see 4 toner levels.
    Also, what happens when you actually choose to print? On mine I get a box appear which actually shows toner levels each time.
    I'm not actually in the office right now so I'll check later and post again if I can add anything.

  • What is IS NULL doing in replacing NOT EXISTS operator with an outer join?

    DB version:10gR2
    An example from searchoracle.target.com
    The query which contains a NOT EXISTS operator
    SELECT M.ModulId, M.Modul FROM MODULE M
    WHERE NOT EXISTS
    ( SELECT PROJEKTMODUL.IdModul
      FROM PROJEKTMODUL
      WHERE M.ModulId = PROJEKTMODUL.IdModul
      AND PROJEKTMODUL.IdProjekt = 23 )is replaced by an equivalent outer join query
    select distinct
           M.ModulId
         , M.Modul
      from MODULE M
    left outer
      join PROJEKTMODUL
        on M.ModulId = PROJEKTMODUL.IdModul
       and PROJEKTMODUL.IdProjekt = 23
    where PROJEKTMODUL.IdProjekt is nullI don't understand what
    PROJEKTMODUL.IdProjekt is nullis doing in the above rewritten query.

    It is to perform an Anti-Join. As far as I know Oracle (starting with release 10g - I thought Release 1) rewrites your NOT EXISTS and NOT IN query to a Anti Join which looks like your second query.
    Look at the results of the query without the IS NULL predicate and see which records (from that set) should be selected to show the same results as the first query. The records of interest match the predicate IS NULL.

  • W32.conficker.worm - detection and blocking with a IPS 4235

    We have an IPS 4235 system with IPS-K9-5.1-8-E3 Engine and sig file IPS-sig-s368-reg-E3 in fron of our Firewall. We also (unfortunately) have the w32.conficker worm which is causing a DDOS and flooding the network with TCP 445 traffic. We are trying to set up the IPS to block this traffic before it hits our Firewall so that we can restore external WAN links.
    The IPS system sucessfully detects this 445 traffic as signature ID 1302 and fills the event log, but even though we have enabled "deny connection inline" in the "signature configuration" - it still does not seem to block the 445 traffic. Has anyone seen this before, and could they advise us on how to effectively block this traffic?

    Hi,
    Regardless of what the Signature fire's on you should still be able to set an action.
    I could set it to fire on receiving any tcp syn and request a deny attack inline. If it is not working then I would question the configuration not the signature attribute.
    A google search found this information regarding the worm. It seems to download a file via a random HTTP port. Perhaps you could look at using the AIC HTTP engine, and matching on the filename with a regex.
    “This malware mostly spreads within corporations but also was reported by several hundred home users. It opens a random port between port 1024 and 10000 and acts like a web server. It propagates to random computers on the network by exploiting MS08-067. Once the remote computer is exploited, that computer will download a copy of the worm via HTTP using the random port opened by the worm.”
    Have you checked that there are no event action overrides configured that would overwrite your condition ?
    Also have you ensured that the IPS is configured to never block certain address ranges ?
    If you are seeing the signature fire then we can assume that the traffic flow has been setup correctly.
    We cannot just block based on port 445 as we will be denying genuine RPC traffic. However we could customise the signature to fire based around a combination of the HTTP post or get. Or peer to peer RPC traffic.
    HTH,
    Jon Humphries
    Nextiraone UK

  • What happens to Existing index after table partition and created with local index

    Hi guys,
    desc part id  number, name  varchar2(100), salary  number
    In an existing table  PART  i am  adding 1 more column DATASEQ NUMBER. i am asked to partition the table part based on dataseq.now the table is created with this logic
    create table part( id  number, name  varchar2(100), salary  number, DATASEQ  number) partition by list(dataseq) (partition PART_INITIAL  values (1));
    Suggestionn required. since  the table is partitioned based on DATASEQ i am asked to add local index on dataseq. i have added local index to dataseq create index idx on part(dataseq) LOCAL; Now my question is  already there is existing index is for the column ID and salary.
    1)  IDX for  dataseq is created locally so that it will have partition on each partition on the main table. Please tell me what happens to the existing index on the column ID and salary.. will it again created in local?
    Please suggest
    S

    Hi,
    first of all, in reality "partition a table" means create a new table a migrate existing data there (although theoretically you can use dbms_redefinition to partition an existing table -- however, it's just doing the same thing behind the scenes). This means that you also get to decide what to do with the indexes -- which indexes will be local, which will be global (you can also re-evaluate some of existing indexes and decide that they're not really needed).
    Second of all, the choice of partitioning key looks odd. Partitioning is a data manageability technique more than anything else, so in order to benefit from it you need to find a good partitioning key. A recently added column named "data_seq" doesn't look like a good candidate. Can you provide more details about this column and why it was chosen as a partitioning key?
    I suspect that whoever suggested this partitioning scheme is making a huge mistake. A non-partitioned table is much better in all aspects (including manageability and performance) than wrongly partitioned one.
    Best regards,
    Nikolay

  • How can I monitor what my kids are searching on the internet and chats with their iphones

    Can I monitor from my iphone what my kids are searching on their iphones

    Hello Fellows2014,
    After reviewing your post, I have located an article that can help in this situation. It contains helpful advice concerning parental controls:
    iOS: Understanding Restrictions (parental controls)
    http://support.apple.com/kb/ht4213
    You can enable Restrictions, also known as parental controls, on iPhone, iPad, and iPod touch. Restrictions stop you from using specific features and applications. Learn more about the types of Restrictions and how to enable or disable them on your device.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Has anyone experienced issues with the new 6.0 update.  Hotspot does not work now and issues with Wi-Fi

    Since putting new operating system of 6.0 on several iPhones.....the hotspot will no longer work and either does Wi-Fi

    Use the search box at the upper right hand corner of this page
    Look to the right in the "MORE LIKE THIS" area

  • Why does Firefox 6 struggle and stutter with the new 4Od?

    Why does Firefox 6 struggle with the new 4Od?
    OK, so here’s my question. I have been using Firefox for years; it’s a wonderful piece of software and an excellent browser. Recently I’ve been having problems with plugin-container.exe. The general advice has been to make sure that Flash Player is up to date (10.3.183.7) and that Firefox is up to date (6.0.1). I still have problems, particularly on YouTube and the new 4Od site, so much so that I used about:config to disable “dom.ipc.plugins.enabled”, I set the value to false. Plugin-container.exe was, prior to this, hogging all the CPU it could get its grubby little mits on, this no longer happens but whilst watching 4Od Firefox eats my entire CPU and the rendered video stream is filled with stutter, almost like frame dropping. It’s fun to watch Firefox struggle, but its no fun trying to watch a program. In desperation I downloaded and installed Chrome. Watching 4Od my CPU usage dropped from 98-100% down to 82%. I don’t particularly want to use Chrome but I do increasingly use my browser to watch streaming video content. Incidentally, if I use Firefox to watch the BBC Iplayer I only burn 35% CPU using Firefox. Oh, and I’m XPSP3, up to date.
    How do I solve this stuttering problem?
    Is this a codec issue with-in Flash Player?
    Does 4Od use some sort of unsupported codec?
    I can’t be the only one out on this limb and I know the problem solvers like a good challenge. Any help or suggestions will be much appreciated.

    You can use Themes or Personas to change the display of Firefox browser.
    * https://addons.mozilla.org/en-US/firefox/themes/
    * https://addons.mozilla.org/en-US/firefox/personas/
    You can Middle-click a link using Mouse or use '''CTRL + Left-click''' shortkeys to open a link in a New Tab. See these articles:
    * [[Mouse shortcuts]]
    * [[Keyboard shortcuts]]
    Check and tell if its working.
    Not related to your problem but some of your Firefox Plugins are out-dated, so you need to Update them.
    -> Update All your Firefox Plugins by visiting the following link:
    * http://www.mozilla.com/en-US/plugincheck/
    * '''When Downloading Plugins setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, etc.)'''

  • What should I send my producer to mix and master with?

    My friend is going to be mixing and mastering my band's EP. I was hoping I could just send him the Garageband files that he could open up on his end, but I understand he just needs the AIFF/WAV files for the tracks?
    How does that work then?

    rsherid wrote:
    he just needs the AIFF{...} files for the tracks?
    solo and export each track uncompressed

  • What are the SOA Suite (12c) Adapters that can integrate with mainframe systems

    Want to know the all SOA Suite (12c) Adapters that can be used to integrate with mainframe systems

    check this site too: Oracle Integration Adapters:
    The Mainframe and CDC Adapters provide real-time connectivity and integration with legacy and transaction-Processing systems such as IMS, CICS, VSAM or Tuxedo. It also integrates enables performing changed data capture from legacy/mainframe and other popular data sources such as Adabas, DB2, SQL Server or IMB/DB.
    Mainframe and CDC Adapters Catalog
    Oracle® Application Server Adapters for IMS/TM
    Oracle® Application Server Adapters for IMS/DB
    Oracle® Application Server Adapters for CICS
    Oracle® Application Server Adapters for VSAM
    Oracle® Application Server Adapters for Tuxedo
    Oracle® Application Server CDC Adapters for IMS/DB
    Oracle® Application Server CDC Adapters for VSAM
    Oracle® Application Server CDC Adapters for Adabas
    Oracle® Application Server CDC Adapters for DB2
    Oracle® Application Server CDC Adapters for SQL Server
    and this link:
    http://www.oracle.com/technetwork/middleware/adapters/overview/whatsnewinadapters-2226675.pdf

  • HT3546 Although I am connected to the internet via Airport the internet connection does not stay on and comes with a "time-out" message. The airport connection is still on however. I have recently bought an old Mac Book 1.1.

    I have recently bought an old Mac Book after having purchased an iPhone and iPad.
    The internet connection (via Airport) keeps timing out while the Airport connection is still on as confirmed by the Mac and shown on the task bar.
    Any ideas?
    Thank you,
    Peter

    Only fixed this in the last day or two . . .with this!
    https://discussions.apple.com/thread/3588501?start=0&tstart=0

  • What to do when trying to connect iPhone and iMac with bluetooth but iPhone says that iMac is 'not supported'?

    I'm having trouble connecting my iPhone to my iMac via bluetooth. Both devices discover each other and add to each others list but when I go to connect my iPhone tells me that the iMac is 'not supported' and to 'forget device' deleting it from my device list.
    Any help would be greatly appriciated!
    Cirsflan

    because you did not complete the task ,
    see here >>>>>
    How to unlock your iPhone for use with another carrier - Apple Support

  • What does the /O command in combination with images?

    When I use Acrobat 8 to print scanned images to a postscript file an additional images is generated in the postscript file. Dependent on the value (1 or 2) behind the "/O" command this image appears in the pdf after I distilled the postscript with Distiller 8. Does anyone know what this "/O" command does or I can manipulate it with a setting in Acrobat 8?
    Thanks in advance.

    /O isn't a command. It's a normal name. Some procedure somewhere is
    called which will (presumably) look for this name and process it. So
    you need to read the procedure, rather than look for PostScript
    definitions.
    Aandi Inston

Maybe you are looking for

  • Security Violation Error while running schedule task from OIM.

    Hi All, I am getting this error while running a custom java schedule task from OIM: *Thor.API.Exceptions.tcAPIException [EJB:010160] Security Violation: User '<anonymous>' has insufficient permission to access EJB:* type=<ejb>,application=Xellerate,m

  • Black Screen for Install of Windows 7 on Mac Pro Early 2008

    I have a mac pro early 2008 with lion 10.7.4 and boot camp 4.0.3 I think... anyways the problem I have is when I am in boot camp, and configure the HDD partition, then the machine reboots... when it reboots and starts up boot from the install DVD (le

  • Audio and video not in sync? Also photos won't load?

    My video and audio are not in sync on photobooth for videos. Anyone know how to fix this!? Please Also, when I try to change my background on the desktop, when it is supposed to load the pictures for me to choose from it just freezes. It continues to

  • Edited a .jpg file with MSPaint, edit doesn't show up in Dreamweaver. ?

    In my images folder for my website are several .jpg files. I edited the .jpg file in MS Paint.  I added a few blue pixels to stand out.  Then I reopened Dreamweaver MX in local view, looked at the .jpg with Preview in Browser/Firefox, and there were

  • Debugger Not Stopping at Break Points

    Howdy folks, I am trying to debug a rule in which I checkout / modify / checkin a renameUser view. I set some break points at the invoke statements for checking out and checking in. The rule is called from my Update User workflow. I know the rule is