What us the difference of partition 1 and current in disk utility?

Hi everyone,
I bought a WD my passport slim , wanna use half for timemachine n half for file storage, but now only wanna for TM.
I formated it by the erase function in disk utility, n then I click the Inbutton, n it show that partition is zero, why? Since there has one partition why it show zero?
But in the partition tab, it showed "current" n there has 1 partition and more to choose from, I wondering what is the difference between "current" and 1 partition , what I should do before I make the whole hard drive for TM, if I make one partition for TM n other for file storage will my hard drive become unstable?
BTW, if I select the drive, the partition an remain but if I choose the partition of drive ,the partition tab disappear does this normal?
And also if I format the hard dive to hfs+ encrypted the RAID, erase restore tab will disappear too in disk utility, does this normal too?

But in the partition tab, it showed "current" n there has 1 partition and more to choose from, I wondering what is the difference between "current" and 1 partition , what I should do before I make the whole hard drive for TM, if I make one partition for TM n other for file storage will my hard drive become unstable?
Take a screenshot and post it here.
It's very difficult to understand your post.

Similar Messages

What's the difference between Export and Publish to Disk?

Hi folks,
I am wondering what's the difference betewwen "Export" and "Publish" to the local Disk?
Greetings from Germany
JK

Export is a one-way process, no connection back to the original images.
Publish creates a connection that allows you to see what images have changed (in LR) since they were first published. Very useful for on-going projects such as images for a book that you may still be editing.

What is the difference between partition-count and the number of caches?

What is the difference between partition-count and the number of caches in Coherence? Are they same?

Those are totally orthogonal concepts.
For more, look at this thread where I answered your other related questions and explain this, too:
Where can I find the accurate definitions of these terms?
Best regards,
Robert

What is the difference between TO_CHAR and TO_DATE()?

Hi everybody,
i am facing a problem in my system.It is quite urgent, can you explain me "What is the difference between TO_CHAR and TO_DATE()?".
According to user's requirement, they need to generate a code with format "YYMRRR".
YY = year of current year
M = month of current month (IF M >=10 'A' ,M >=11 'B' , M >=10 'C')
RRR = sequence number
Example: we have table USER(USER_ID , USER_NAME , USER_CODE)
EX: SYSDATE = "05-29-2012" MM-DD-YYYY
IF 10
ROW USER_ID , USER_NAME , USER_CODE
1- UID01 , AAAAA , 125001
2- UID02 , AAAAA , 125002
10- UID010 , AAAAA , 12A010
This is the original Script code. But This script runs very well at my Local. Right format. But it just happens wrong format on production.
12A010 (Right) => 11C010 (Wrong).
SELECT TO_CHAR(SYSDATE, 'YY') || DECODE( TO_CHAR(SYSDATE, 'MM'),'01','1', '02','2', '03','3', '04','4', '05','5', '06','6', '07','7', '08','8','09','9', '10','A', '11','B', '12','C') ||     NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE FROM TVC_VSL_SCH
     WHERE TO_CHAR(SYSDATE,'YY') = SUBSTR(USER_CODE,0,2)
     AND TO_CHAR(SYSDATE,'MM') = DECODE(SUBSTR(USER_CODE,3,1),'1','01',
          '2','02', '3','03', '4','04', '5','05',
          '6','06', '7','07', '8','08', '9','09',
          'A','10', 'B','11', 'C','12')
I want to know "What is the difference between TO_CHAR and TO_DATE()?".

try to use following select
with t as
(select TO_CHAR(SYSDATE, 'YY') ||
         DECODE(TO_CHAR(SYSDATE, 'MM'),
                '01', '1',
                '02', '2',
                '03', '3',
                '04', '4',
                '05', '5',
                '06', '6',
                '07', '7',
                '08', '8',
                '09', '9',
                '10', 'A',
                '11', 'B',
                '12', 'C') as code
    from dual)
SELECT t.code || NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE
FROM TVC_VSL_SCH
WHERE SUBSTR(USER_CODE, 1, 3) = t.codeand yes you need check time on your prodaction server
good luck
Edited by: Galbarad on May 29, 2012 3:56 AM

What's the difference between jsp and jsf?

who can tell me what's the difference between jsp and jsf?
I'm puzzled when I found some of the technology in jsp is so similar to the ones in jsp( javaserver page)

Hi,
Find the difference between JSP and JSF
1. A developer has more control with JSP, but (should) get easier development with JSF
2. Event handling is done differently in JSP (HTTP) and JSF (Java)
3. The UI is designed differently (or should be at least) with JSP (markup) and JSF (components).
4. The end product should also be defined differently - JSP page versus a JSF application.
Is this the only thing that is need to make a decision for either or? Probably not. There are other pieces that need to be taken in account when deciding which technology to use - tools support, enough components, type of application etc.... At this point there are not enough JSF components (although there are some interesting projects underway - Ajaxfaces, Myfaces, ADF Faces, and WebChart 3d) and enterprise tools support is still limited to a few tools vendor. Looking at our ADF Faces components they are currently available as early access (not production) and demands for these components are stacking up, literally, outside my office doorstep. Although I would love to make them production - now! - it is not a viable solution since we are still checking features and fixing critical bugs.
All this combined - not enough enterprise level components in production, lacking tools support etc... - leave customers in a vacuum where the decision is either to continue with JSP, since it is mature and has a wide developer base, or move forward with JSF not sure if the support, or the developers will be there. This is particularly sensitive to customers that need to get started now and be production by summer.
If you are in this vacuum here are some key points promoting JSF:
1. Fundamental unit is the Component
2. Built in event and state management
3. Component sets can be provided by any vendor
4. Closer to ASP.Net or Swing development
5. Choice of UI technology
6. Scale up (rich clients)
7. Scale down (mobile devices)
8. Built into J2EE containers in J2EE 5.0 (tentative)

What's the difference between Aurora and Beta?

what's the difference between Aurora and Beta?

The difference between Beta and Aurora is '''1'''. If you have to ask what Aurora is, you shouldn't use it.
The current release version is Firefox 6.0, the Beta is 7.0, Aurora is 8.0, and Nightly is 9.0.
When Firefox 7.0 is released in 4 weeks, 8.0 will be the Beta version, Aurora will be 9.0, and the cutting edge Nightly development version will be 10.0.

What is the difference between DSo and Infocube

Hello,
Kindly tell me what is the difference between DSO and Infocube?
And please tell me how to take the desicion that in whichi case we can use DSO and in which case we can use Infocube..

Hi ,
DataStore object serves as a storage location for consolidated and cleansed transaction data or master data on a document (atomic) level.
This data can be evaluated using a BEx query.
A DataStore object contains key fields (for example, document number/item) and data fields that can also contain character fields (for example, order status, customer) as key figures. The data from a DataStore object can be updated with a delta update into InfoCubes and/or other DataStore objects or master data tables (attributes or texts) in the same system or across different systems.
Unlike multidimensional data storage using InfoCubes, the data in DataStore objects is stored in transparent, flat database tables. The system does not create fact tables or dimension tables.
Use
The cumulative update of key figures is supported for DataStore objects, just as it is with InfoCubes, but with DataStore objects it is also possible to overwrite data fields. This is particularly important with document-related structures. If documents are changed in the source system, these changes include both numeric fields, such as the order quantity, and non-numeric fields, such as the ship-to party, status and delivery date. To reproduce these changes in the DataStore objects in the BI system, you have to overwrite the relevant fields in the DataStore objects and set them to the current value. Furthermore, you can use an overwrite and the existing change log to render a source delta enabled. This means that the delta that is further updated to the InfoCubes, for example, is calculated from two successive after-images.
An InfoCube describes (from an analysis point of view) a self-contained dataset, for example, for a business-orientated area. You analyze this dataset in a BEx query.
An InfoCube is a set of relational tables arranged according to the star schema: A large fact table in the middle surrounded by several dimension tables.
Use
InfoCubes are filled with data from one or more InfoSources or other InfoProviders. They are available as InfoProviders for analysis and reporting purposes.
Structure
The data is stored physically in an InfoCube. It consists of a number of InfoObjects that are filled with data from staging. It has the structure of a star schema.
The real-time characteristic can be assigned to an InfoCube. Real-time InfoCubes are used differently to standard InfoCubes.
ODS versus Info-cubes in a typical project scenario
ODS
why we use ods?
why is psa & ods nessasary
Hope this helps,
Regards,
CSM Reddy

What si the difference between crete and create insert operations.

Hi
In ADF 11g,what is the difference between create and createinsert operations.
if anyone knows plz tell me.Any document about this plz provide me.
Any help is appreciated.
Sailaja.

Hi,
CreateInsert: Creates a new row that becomes the current row, and inserts the
new blank row into the data source.
Create: Creates a new row that becomes the current row, but does not insert it.
--> normaly you would use createinsert
Doc you can find here (search for Createinsert): http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974.pdf
br
Peter

PE2 - What's the difference between "cut" and "clear" in Project Assets?

When removing items from the Project Assets area, what's the difference between "cut" and "clear"?
Also I believe "delete" is an option at times, but I couldn't replicate it.

Cut should Delete, but transfer that Clip to the Clipboard, where Clear will just Delete it completely - no transfer to Clipboard.
That can be tested by doing a Cut, then move the CTI (Current Timeline Indicator) to the end of the Timeline, and hit Ctrl+V (Paste). That Deleted Clip should appear after the CTI.
Then, clear (or choose a different Clip) the Clipboard, and try Clear. It should not Paste the Clip into the Timeline.
Good luck,
Hunt

HT2523 What is the difference between Pages and Text Edit? Pros and Cons?

I just purchased a Macbook Pro, and I am currently exploring its features. I see that it comes with Text Edit, which seems to be its form of Microsoft Word...but I also know that you can purchase "Pages" for the computer. What is the difference? Pros and cons of each? I will be a freshman in college in the fall, so I need something that I can do lots of writing and editing on.

TextEdit is a simple basic text editor. Far from what MS Word can do. This is Pages:
http://www.apple.com/iwork/pages/

What is the difference between MOVE and WRITE TO ststement?

Hi
What is the difference between MOVE and WRITE TO ststement?
When do we use both of them?
Thank You

Hi,
<b>MOVE</b>
Syntax
MOVE source {TO|?TO} destination.
destination {=|?=} source.
Effect
Both these statements assign the content of the operand source to the data object destination. The variants with the language element TO or the assignment operator = are valid for all assignments between operands that are not reference variables, and for assignments between reference variables for which the static type of source is more specific than or the same as the static type of destination(narrowing cast).
Variants with the language element ?TO or the assignment operator ?= (casting operator ) must be used if the source and destination are reference variables and the static type of source is more general than the static type of destination (widening cast). For assignments between operands that are not reference variables, use of the question mark ? is not permitted.
The data object destination can be any data object that can be listed at a write position, and the data object source can be a data object, a predefined function or a functional method (as of release 6.10). The data type of the data object destination must either be compatible with the data type of source, or it must be possible to convert the content of source into the data type of destination according to one of the conversion rules.
Notes
If source and/or destination are field symbols, then, as in all ABAP commands, the system works with the content of the data objects to which the field symbols point. The actual pointer content of a field symbol can only be changed using the statement ASSIGN or the addition ASSIGNING when processing internal tables (value semantics). If source and destination are reference variables, the reference contained in source is assigned to destination (reference semantics).
Strings and internal tables are addressed internally using references. When assignments are made between strings and between internal tables (as of release 6.10), only the reference is transferred, for performance reasons. After the assignment, the actual string or the actual table body of the source as well as the target object are addressed (sharing). When the object is accessed to change it, the sharing is canceled and a copy of the content is made. The sharing is displayed in the memory consumption display of the ABAP debugger and in the Memory Inspector tool (as of release 6.20).
Obsolete Form: MOVE PERCENTAGE
Exceptions
Catchable Exceptions
CX_SY_CONVERSION_NO_NUMBER
Cause: Operand cannot be interpreted as number
Runtime Error: CONVT_NO_NUMBER (catchable)
CX_SY_CONVERSION_OVERFLOW
Cause: Overflow with arithmetic operation (type P, with specified length)
Runtime Error: BCD_FIELD_OVERFLOW (catchable)
Cause: Operand too large or (intermediate) result too large
Runtime Error: CONVT_OVERFLOW (catchable)
CX_SY_MOVE_CAST_ERROR
Cause: Source or target variable are not reference variables
Runtime Error: MOVE_CAST_REF_ONLY
Non-Catchable Exceptions
Cause: Source field (type P) does not contain correct BCD format.
Runtime Error: BCD_BADDATA
Cause: Assignment for deep structures not permitted if these overlap.
Runtime Error: MOVE_COMPLEX_OVERLAP
Cause: Type conflict with the assignment between object references.
Runtime Error: MOVE_INTERFACE_NOT_SUPPORTED,
Runtime Error: MOVE_IREF_NOT_CONVERTIBLE,
Runtime Error: MOVE_IREF_TO_OREF,
Runtime Error: MOVE_OREF_NOT_CONVERTIBLE
Cause: Type conflict with the assignment between data references.
Runtime Error: MOVE_DREF_NOT_COMPATIBLE
Cause: Assignment between the types involved not supported.
Runtime Error: MOVE_NOT_SUPPORTED
Cause: Constants and literals must not be overwritten.
Runtime Error: MOVE_TO_LIT_NOTALLOWED
Cause: onstants and literals must not be overwritten.
Runtime Error: MOVE_TO_LIT_NOTALLOWED_NODATA
Cause: During a loop in an internal table, an attempt was made to overwrite a reference variable that is linked with the internal table by REFERENCE INTO.
Runtime Error: MOVE_TO_LOOP_REF
<b>Write</b>
Syntax Diagram
WRITE - TO
Syntax
WRITE {source|(source_name)} TO destination
                             [int_format_options].
Effect:
This statement assigns the formatted content of the data object source, or the formatted content of the data object whose name is contained in source_name, to the data object destination. The data objects source_name and destination must be character type and flat. source_name can contain the name of the data object to be assigned in upper or lower case. If the data object specified in source_name does not exist, the assignment is not executed, and sy-subrc is set to 4.
The statement WRITE TO has the same effect as the statement WRITE for lists. This statement formats the content of source or the source field specified in source_name as described in the field. It does not, however, store the result in an output area of a list in the list buffer, but instead stores it in a variable. The output length is determined by the length of the variable.
The same additions int_format_options can be specified for formatting the content as in the statement WRITE for lists, except for NO-GAP and UNDER.
System fields
sy-subrc Meaning
0 The data object specified in source_name was found and the assignment was executed.
4 The data object specified in source_name was not found and the assignment was not executed.
For the static specification of source, sy-subrc is not set.
Note:
If destination is specified as an untyped field symbol or an untyped formal parameter, and is not flat and character-type when the statement is executed, this leads to an untreatable exception in a Unicode program. In non-Unicode programs, this only leads to an exception for deep types. Flat types are handled as character-type data types.
Example:
After the assignment, the variables date_short and date_long receive the current date in the order specified in the user master record. The variable date_long also contains the defined separators, as the output length is sufficiently long. The content of the variable date_mask is formatted according to the formatting addition DD/MM/YY.
DATA: date_short(8) TYPE c,
      date_long(10) TYPE c,
      date_mask(8) TYPE c.
WRITE sy-datum TO: date_short,
                   date_long,
                   date_mask DD/MM/YY.
Exceptions
Non-Catchable Exceptions
Cause: Negative length specified for offset/length
Runtime Error: WRITE_TO_LENGTH_NEGATIVE
Cause: Negative offset specified in offset/length
Runtime Error: WRITE_TO_OFFSET_NEGATIVE
Cause: Offset specified in offset/length specification is longer than the field length.
Runtime Error: WRITE_TO_OFFSET_TOOLARGE
Thanks
sunil

What is the difference between #variable_name and :variable_name?

Hi!
What is the difference between #variable_name and :variable_name?
I have found that if we use alphanumeric variable then :variable_name return value in quotes but #variable_name without quotes.
Why it does not work in the same way for variable default values when variable is used in filter? (It works in mapping)
I use variable in filter like T.OUT_DATE>convert(datetime,:LAST_UPDATE_DATE,121)
When I use my variable in package and do refresh it works fine. But when I try to execute the same interface with variable default value I get error. Seems that variable name has been not changed to the value. It does not work with default value in quotes neither without quotes.
Any ideas how to solve that?
Thank you in advance!
Edited by: user13278245 on Sep 15, 2010 4:34 AM

Question is how to make it work with default value, when I execute interface standalone, not in package? And why it works in mapping but not in filter?
+ I have found that it works if source is Oracle. It doesn't work only for MS SQL source.
Edited by: user13278245 on Sep 15, 2010 6:43 AM

What is the difference between start() and run()

Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnx

what is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in.

What is the difference between exists and in

hi all
if i have these queries
1- select ename from emp where ename in ( select ename from emp where empno=10)
and
2- select ename from emp where exists ( select ename from emp where empno=10)
what is the difference between exists and in is that only when i use in i have to bring the field name or what.... i mean in a complex SQL queries is it will give the same answer
Thanks

You get two entirely different result sets that may be the same. Haah! What do I mean by that.
SQL> select table_name from user_tables;
TABLE_NAME
BAR
FOO
2 rows selected.
SQL> select table_name from user_tables where table_name in (select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
FOO
1 row selected.
SQL> select table_name from user_tables where exists(select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
BAR
FOO
2 rows selected.So, why is this? the WHERE EXISTS means 'if the next is true', much like where 1=1 being always true and 1=2 being always false. In this case, where exists could be TRUE or FALSE, depending on the subquery.
WHERE EXISTS can be useful for something like testing if we have data, without actually having to return columns.
So, if you want to see if an employee exists you might say
SELECT 1 FROM DUAL WHERE EXISTS( select * from emp where empid = 10);
If there is a row in emp for empid=10, then you get back 1 from dual;
This is what I call an 'optimistic' lookup because the WHERE EXISTS ends as soon as there is a hit. It does not care how many - only that at least one exists. It is optimistic because it will continue processing the table lookup until either it hits or reaches the end of the table - for a non-indexed query.

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC? 2) What is the difference between 6 and CC vercion? 3) When I used lightromm 3, I could see inEXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is ve

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
2) What is the difference between 6 and CC version?
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
Purchase the standalone upgrade from here: Products
Download CC version from here: Explore Adobe desktop apps | Adobe Creative Cloud
2) What is the difference between 6 and CC version?
See this comparison chart: Compare Lightroom versions | Adobe Photoshop Lightroom CC
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?
Rob Cole's ExifMeta plugin displays the Subject Distance field (and much more). Unfortunately, his Web site appears to be down again. He used to be very active here, but he hasn't posted in several months.

What's the difference between thunderbolt and mini displayport?

I'm trying to connect my Macbook with a monitor and I'm thinking of what cable to get. I will have to connect using a (Thunderbolt to HDMI cable) or a (mini displayport to HDMI cable).
I was wondering what's the difference between Thunderbolt and mini displayport
Thanks

@bontistic: it is not true that only the Macbook Air supports Thunderbolt. All models(!) support thunderbolt: also the Macbook Pro's and Mini's. Eg.: http://www.apple.com/nl/macbookpro/features.html#thunderbolt
My Macbook Pro from 2011 already supported Thunderbolt...

What us the difference of partition 1 and current in disk utility?

Similar Messages

Maybe you are looking for