What USB connection do I use for 5530

What USB cable can I use to get this thing WORKING

You likely need the manual and should follow it. See here. That printer is USB 2.0 and also wireless capability.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

HT4718 What USB Flashdrive can I use for the Recovery System a 4G or a 8G?

What size of drive do I need for the Recovery System? Can I use a USB flashdrive?

If you're talking about just the Recovery HD, you only need 1GB so use a 4GB USB thumb drive and the OS X Recovery Disk Assistant to create it.
If you're talking about the ML installer (installESD.dmg) use an 8GB USB thumb drive.

I have a USB adapter for my iPad, can I plug in a AT&T USB Connect Momentum and use it for my internet connection.

I have a USB adapter for my iPad, can I plug in a AT&T USB Connect Momentum and use it for my internet connection??

Probably not normally, Apple has removed some of the hidden features of the USB dongle via a software update for iPad. One of those features was playing host to hard drives, keyboards, etc.

I have a new (mid) 2011 imac and want to transfer my old records to itunes but i dont know what usb turntable would be best for a new mac that would have compatible software for ripping to itunes?

i have a mid 2011 i5 imac and i want to transfer my vinyl records to itunes but i dont know what usb turntable would be best for my imac that has compatible software for transfer to itunes

Hallo,
I use an Akai usb turntable with the Audacity sw delivered with it. To monitor during recording I also use the LineIn utility (all this on a Macbook Pro with Mavericks).
It works fine, only the input volume of the usb audio port cannot be adjusted (at least I did not yet discover how to do it) and the volume of the music is lower than other music imported into iTunes from CD or iTunes store, but still acceptable.
Success, Jean

Whats a good mac to use for a home flight simulator with flight controls and foot pedals?

whats a good mac to use for a home flight simulator with flight controls and foot pedals?
My old 6100 AV worked great on A10 ATTACK, back in 1993.
whats a good set up now a days?
I havent seen any MAC set ups as a lot of the after market accessories are on Windows platform.
Is there a way or should I get a dedicated simulator on PC?

The fact that USB flight input devices appear to Windows only is not a limitation; for Mac most are programmed through the sim itself. I know X-Plane does that.
I've simmed a lot and know that good sims need a lot of processor and video hardware horsepower, and you'll also need a lot of RAM. They also run up the internal temps. A Mac Pro has better cooling than an iMac. You can get a program like SMCFanControl to manually set up the fans speeds before starting the sim.
I know of no sims today that will still run on a PowerPC Mac (2005 and earlier) so you need to look to an Intel Mac with top specs. If looking at iMacs, start by looking for the quad-core i7 processor. Those models usually came with an up-rated video card. Thing 12 to 16GB RAM.
My 2010 iMac has the 2.93gHz i7 processor, video hardware (ATI 5750) with 1TB VRAM, and 12 GB of RAM. It runs the x-Plane 10 demo fine but I've not bought the full version because v10 seems to make foot pedals darned near mandatory, and I don't want $100 worth of pedals under my regular work desk at the moment.

Can the USB NI DAQs be used for process control,eg.closed loop? or is too fast

can the USB NI DAQs be used for process control,eg.closed loop? or is too fast.

Hi mho,
1.usb is very high speed that is correct.Better you can choose PCI DAQ.But thats upto you.
2. see this:-
http://sine.ni.com/nips/cds/view/p/lang/en/nid/14136
3.If Matlab support TCP/IP, that could be an option.
see Another idea: http://digital.ni.com/public.nsf/allkb/244A37667BD7CBCE86257520007F937B
Another simplest way to do it (assuming you running Windows) is to use a Matlab script.
If both programs running on different systems:-
Most simple and slow - Create two VI's with shared variable on both machines, and use a matlab script to
share data. (this makes matlab some kind of "slave").
More advanced but still relatively slow (Create two VI's with shared variable, on the Matlab machine build the .NET
dll, and it can be used on Matlab too ( at least at 2010b version, earlier version support only COM).
Create TCP/IP connection between two comps.
There is "out of the box" NI products, that communicate with Simulink models.You please do a simple search on that...OK
I think this link is also helpful for you:-
Procedimiento para la interface entre LabView 2009 y Matlab 2009b.pdf 1128 KB
Anyway All the best.Try....do it.
Thanks as kudos only

What's ExpressCar/34 slot used for

Hi all, I'm a Mac green hand. What's ExpressCar/34 slot used for?
Since SD card is impossible to be inserted into it, and I've got to buy a reader, what's this slot for?
Thanks~

Lots of uses, besides just wireless broadband. You can get a media card reader (I have an 11-in-1 ExpressCard from SIIG). SSD memory. Additional ports (USB, FW, eSATA).
See this site:
http://www.expresscard.org/web/site/

What are all the tables used for this report:

hi
what are all the tables used for this report:
report:
Stock Report, which will give opening balance, receipt, issue, and closing balance for any given Duration for any material.
thanks in advance

Tables: MSEG, MKPF, MARD.
FOR REFERENCE SEE TRANSACTION : MB5B.
Message was edited by: Sharath kumar R

IPod HiFi - What dock connector do I use for a 80GB (5th Generation) ipod??

Hi,
Just got a new shinny ipod HiFi, however what dock connector can I use for an 80GB (5thG) as the connectors only go up to 60GB??? Or does the ipod come with a dock connector? Can anyone point me in the right direction, pretty please.
Any suggestions would be great help.
Cheers
Sian

You mean the dock adapter, right? The little plastic piece with a slot?
Use the one for the 60GB.
The only thing they do is make the iPods it correctly in the dock.
The dock connector is the slot on the bottom of the iPod.

What r all the tables used for this report. please reply

hai,
what r all the tables used for this report.
report :

Report to display all finished goods that go out-of-stock. Developed a drill down report for materials details (totals and subtotals for material stock values by material group and material type).
thanks in advance

hi Ashok,
Check this out
http://www.allsaplinks.com/tables.html
http://www.sapgenie.com/abap/tables.htm
Regards,
Santosh

What host name do I use for Hotmail incoming mail server?

What host name do I use for Hotmail incoming mail server?

Access the homescreen and tap "Settings."
Go to "Mail, Contacts, and Calendars" and tap "Add Account." Your iPhone should display a list of email service providers. Even though you are setting up a Hotmail account, you will be doing it first through Gmail on your iPhone. Tap the Gmail icon to create a new account. Enter your name and a user name and password for the new Hotmail account you will be making later. Enter "imap.gmail.com" in the "HostName" column. Press the "Save" button at the upper right corner of the screen.
Enter your name, email address, password, and the description of the account. Next, click "Save." You should now be able to check your email from the homescreen.
Enter "smtp.gmail.com" in the "Outgoing Mail Server." Enter the password for this Gmail account in the "Password" column. Enter user name for this Gmail account in the "UserName" column. Press the "Save" button at the upper right corner of the screen. Press the "Home" button to return to the iPhone's home screen.
Use the Web browser to go to Hotmail.com and create a new account. Use the user name and password for the account that you entered into the Gmail account on the iPhone earlier. Click on “Settings” after the account has been created.
Click on the "Settings" tab. Click on the "Forwarding" tab. Click on the "Pop/IMAP" tab and select "Enable IMAP." Click on the "Save” button. Click on “Settings” and select “Accounts” and then “Add Another Email Address” from the webpage. Enter the name of your existing Hotmail account in the column. Press “Save.”
Go to the inbox. Open the message from Gmail and click on the link in the message box. Select the “Options” tab and check the “Forwarding email” box.
Send yourself a message to your Hotmail account from an email client. Click on the icon of the Mail program at the bottom of the iPhone’s screen. The email you sent to Hotmail will appear in the inbox of the Gmail account in the iPhone's email.

What easy setup do I use for the Canon A1 1080i60?

What easy setup do I use for the Canon A1 1080i60?

I called tech support and they were no help.
G5 Mac OS X (10.4.9)

What r all the tables used for the following report

hai
what r all the tables used for the following report
report:

Report that displays all the late shipments in a particular period of time
send important fields for this tables also
thanks in advance.

Hi,
Imp table are vttk,vttp,vtts.
Regards
Amole

What is FM VC_I_GET_CONFIGURATION actually used for?

Hello ABAP Gurus
I just want know what actually the FM VC_I_GET_CONFIGURATION used for.
What are the input parameters for this function and also what kind of information can I get by calling this FM.
Any feedback on this will be greatly appreciated.
Thanks
Ram

Hi Ram,

VC_I_GET_CONFIGURATION is used to find charateristic value and characteristic description for the given class type and batch number (CHARG) of a material.
call function 'VC_I_GET_CONFIGURATION'
exporting
 INSTANCE = vbap-cuobj
 LANGUAGE = SY-LANGU
TABLES
 CONFIGURATION = i_config
EXCEPTIONS
 INSTANCE_NOT_FOUND = 1
 INTERNAL_ERROR = 2
 NO_CLASS_ALLOCATION = 3
 INSTANCE_NOT_VALID = 4
 OTHERS = 5.
Reward if useful.
Thanks
Aneesh.

What IDOC message type to use for AP posting

Hi,
My User wanted to use the invoice information created for comany A to be input to company B as AP entries. A and B are inter-company,
Whar IDOC message should I used for AP posting?
What BAPI function can I used for AP Posting?

Hi,
Lets try the below things for AP posting.
Idoc type : invoic02
Message type : invoic
Process code : INVF
BAPI for posting : BAPI_ACC_GL_POSTING_POST{ Try to explore some more if possble, for AP posting in my case we are separtaing the data based on posting key ex: 31 }
BR,
Rajani

What USB connection do I use for 5530

Similar Messages

Maybe you are looking for