What use is the program if it only works on half your pdfs?

I purchased this to export large amounts of data for production sheets. It only picks up half, and half of that is nonsense. I would like to find the refund department.

Hi Brandy,
Is there a chance your PDF's originate from scans? Have you tried this OCR solution?
Let me know how you want to move forward.
Kindest regards, Stacy

Similar Messages

  • What would cause the Messages App to only work intermittently?

    The first letter typed should switch the Send button on indicating things are ok, more often than not this doesn't happen. Settings seem to be right so what else might be causing this?

    I'll bet the lightbulb for execution highlighting isn't visable either is it? The problem is that someone turned off debugging for the VI in question. Debugging code does cost a little time so people who typically run their applications in the development system will sometimes turn off debugging. (Building a standalone application forces debugging off automatically).
    To be able to probe your routine, right click on the vi's icon in the title bar and select "VI Properties..." and go to the "Execution" catagory and make sure the box labled "Allow Debugging" is checked.
    This should put things right...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Library is full of EVERY pic I have ever used in the program. How do I make them go away?

    Edge Animate no longer functions because my library is full of every picture i have ever used in the program.  Not just in one project file, but ALL the projects.  All the images carry over whenever i start a new animation.  It's so bogged down now that I can't even use the program at all.  I cannot add new content to an existing project.
    -Checked my system requirements
    -Tried to manage in Explorer
    -Looked through the forum questions
    -Had help over the phone-appeared they fixed it, but it still is doing the same thing
    -Went to chat and no one ever responded
    I am at a loss to make this program work. 
    Help

    Here it shows just a portion of my Library.  I open a new project and my libarary seems to be one continuous entry that stays.  Some of those pics were added after I made this project from a totally different file a different file.  This is a very simple animation of only 8-10 PNG pics that loop.

  • How to find out theTables used in  the program

    hi experts,
    can any one tell what are the ways to find out the tables used in the program
    thanks in advance.

    Hello,
    Below are some tips:
    1. If custom program- SEARCH for "TABLES" or "SELECT" stmt.
    2. The full-proof way will be to activate SQL Trace. Goto tcode ST05, check SQL Trace & then activate trace.
        Execute the program. After execution is complete, deactivate trace & then display trace. You will get all the tables which are being used.
    BR,
    Suhas

  • The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

    The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

    The startup disk may need repairing ...
    Launch Disk Utility located in HD > Applications > Utilities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk  (not Verify Disk Permissions)
    If the disk needs repairing, restart your Mac while holding down the Command + R keys. From there you can access the built in utilities in OS X Recovery to repair the startup disk.

  • How to find the names of Function Module used in the program

    Hi all,
    can you people help me with this issue.I want to the names of all the Function Module used in the program  along with their parameters into an internal table.It will be helpful for your suggestions.
    Kind Regards,
    Edited by: Prasenjit Sengupta on Nov 20, 2008 7:39 AM

    Take structure of internal table as
    TYPES : BEGIN OF TY_FM,
            FUNCNAME TYPE RS38L_FNAM,  "Name of Function Module
            PARAMETER TYPE RS38L_PAR_, "Parameter name
            PARAMTYPE TYPE RS38L_KIND, " Parameter type
            R3STATE TYPE R3STATE,      "ABAP: Program Status (Active, Saved, Transported...)
            STRUCTURE TYPE RS38L_TYP,  "Associated Type of an Interface Parameter
            DEFAULTVAL TYPE RS38L_DEFO,"Default value for import parameter
            REFERENCE TYPE RS38L_REFE, "Call by reference
            OPTIONAL TYPE RS38L_OPTI,  "Optional parameters
            TYPE TYPE RS38L_TYPE,      "Reference Structure is an ABAP/4 Type
            END OF TY_FM.
    DATA : IT_FM TYPE TABLE OF TY_FM WITH HEADER LINE.

  • Need a table which all custom tables used in the program

    HI to all experts.
    I need a table  which contains  all the custom table used in the program . Or any other method which can accomplish this.

    hi max,
    thanks for u r reply . if we use the statement tables in the report and write some tables
    for example: tables: zf020
                                    zf023
    is there any table which stores this .

  • Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears: "The licensing of the product does not work" Fault 6 How should I proceed? Have the program installed on only one computer.

    Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears:
    "The licensing of the product does not work"
    Fault 6
    How should I proceed?
    Have the program installed on only one computer.

    Download the Adobe Licensing Repair Tool.
    Run the License Service Update.
    Mac OS X 10.7 and above:
    a. Double-click the LicenseRecovery111.dmg   It will extract the folder. Open the folder.
    b. Double-click your Hard Drive.
    c. Double-click Applications.
    d. Double-click Utilities.
    e. Double-click Terminal.
    f. Type sudo python
    Note: There is a space following “python”. Do not press Return.
    g. Drag LicenseRecover.py from the LicenseRecovery111 folder onto the Terminal Window and press Return.
    It should look like this:
    h. Enter your administrator user name and password when prompted and click OK.
    (Note: the cursor will not move and you will not see stars or dots, just enter your password anyway.
    i. Let the script run, it will tell you when it is finished. Quit terminal and restart Photoshop
    Gene

  • When does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.

    when does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.

    Freialeben7 the evaluation period begins when you first launch the Adobe application you are wishing to evaluate.

  • How can I avoid this message and the crash that follows? -"the program has unexpectedly stopped working and will close"

    I am working on some books that I have had no problem creating in Indesign  and this week, I was doing something and got an error message and had the program crash while I was working on something and lose my unsaved work. It happens all of a sudden and has been frustrating. Thought it was an installation issue, but this also happens on the newest version of CS6.
    The original files (“books”) were created in CS4.
    What I’m doing is copying a template for the appendix that was established in the first book into all subsequent books.
    Here is the process that I used on CS4 for the first 10 books –
    1.       open a file that already has the completed new appendix.
    2.       Open a file that needs the new appendix
    3.       Select the appendix pages from the pages menu in the completed file and “move” them to the new file.
    4.       Voila!
    When I started using CS5 this worked for one book. Now the last book is giving me an error message during step 3. So, I select the pages I want to move and click “move” and then I get a message that says “the program has unexpectedly stopped working and will close”. This is the same message I got with CS6.

    Same problem here. Firefox keeps freezing, sometimes for 5 minutes, then either starts working again really slowly or I get the plug-in error crash. This last time I copied what windows said about the error. This is the info:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: plugin-container.exe
    Application Version: 1.9.2.3814
    Application Timestamp: 4c12b3be
    Fault Module Name: ntdll.dll
    Fault Module Version: 6.0.6002.18005
    Fault Module Timestamp: 49e03821
    Exception Code: c0000005
    Exception Offset: 00048b02
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional Information 1: ca4b
    Additional Information 2: 0db6cc4f646c2246ddf8a462e3add7af
    Additional Information 3: 5b21
    Additional Information 4: e5b7e758762c24b02e09abea0b4585f4
    Don't know what it means or if it will help solve the issue, but thought I would share it.
    All I know is that I am about to do something I never thought I would, switch to Chrome.

  • I have problem with firefox , it wont loud , the dose not come up , and it frizzes ? i even re-install the program but it wont work:( any suggestion would be helpful , thanks

    i have problem with firefox , it wont loud , the dose not come up , and it frizzes ? i even re-install the program but it wont work:( any suggestion would be helpful , thanks
    i cant login anywhere as all my passwords are saved in firefox, i cant even access teh firefox preference to get my password, it's so sad

    You likley have a corrupted Firefox preference or other support file in your User/Library folder.
    Programs load these files from the user account to adjust to user specifications, instead of having multiple copies of the same program on the machine.
    So when you reinstalled Firefox, it reinstalled the progrma only and the user support files remained from before.
    To prove this point, use System Preferences to create another Admin account and log into it, Firefox should run like a charm.
    To remove the Firefox support files from the problem user account your going to need to locate these files and delete them one at a time and try FF again and again.
    The first one you shoull try is your FF .plist file located in your User/Library folder.
    Clicm on the Finder and use the Go > Go to Folder and paste this
    ~/Library/Preferences
    and press Go.
    Now scroll down until you see the Firefox or Mozilla .plist file and Trash it, quit and restart Firefox, it will recreate the preference file with default settings you will have to reset it.
    Next run through the list of fixes #1-13 here before proceeding.
    https://discussions.apple.com/docs/DOC-3353
    If you need help deleting other FF files, download the free Easy Find from MacUpdate.com and search for anything "Mozilla" or "Firefox" in your User account only and take your chances you hopefully won't delete your password file in the process.
    You should have site passwords written down someplace and locked up tightin case you need them, a computer isn't totally safe and reliable.

  • I have purchased the program and now how do I convert a PDF file into excel?

    I have purchased the program and now how do I convert a PDF file into excel?

    Hi johnhnk2,
    Please see Getting Started with ExportPDF | Adobe Community.
    That document will tell you what you need to know to get started. Please note, however, that it can take 24-48 hours for an order to process fully.
    Best,
    Sara

  • Could not use color replacement tool because it only works in full color mode: Elements 11

    I have a PSD file open and I added a new layer via the copy command.  I have added a Layer Mask to the new layer and I'm trying to use the Brush Tool with black forground to cover part of the new layer.  I'm following an online tutorial step by step, but when I try to use the Brush Tool I get "could not use color replacement tool because it only works in full color mode".  The Image>Mode is set to RGB.  I'm stuck!

    First, show the tools optiond in the bottom of the screen (shortcut F4)
    Now look at which of the three options you can select, brush, impressionist brush or replacement tool. I suspect you have to select the brush.
    Edit:
    The reason of the message is that when you are painting on a mask you are in greyscale mode for the mask. For instance, if you paste a coloured layer into a mask, it will be converted to greyscale.

  • None of the programs of cc is working

    Hi there people! I installed an ssd in an imac and now none of the programs of cc is working: they give the rainbow wheel of death and i need to force quit all the time...
    Thunderbird starts up but if i want to reply to a mail it also freezes... Anybody ever had this problem and knows a solution?

    Hi Martin,
    Please try: OS X Yosemite: Start up in safe mode
    If this doesn't work out for you, kindly contact our support team Contact Customer Care.
    If you are unable to use chat option kindly try below mentioned steps.
    Try different browser.
    Delete cookies and cache
    If you are still not able to chat, Kindly reply with the below mentioned information.
    OS version:
    Browser Version:
    You can also try: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html 
    Thanks,
    Atul Saini

  • When trying to open lightroom I get a message that says, "The lightroom.exe that the short cut refers to has been changed or moved, so the short cut will no longer work properly.  Do you want to remove this short cut?  The program has opened and worked fi

    When trying to open lightroom I get a message that says, "The lightroom.exe that the short cut refers to has been changed or moved, so the short cut will no longer work properly.  Do you want to remove this short cut?  The program has opened and worked fine in the past.

    You have (probably accidentally) moved or deleted the Lightroom program. You need to find it (have your operating system search for lightroom.exe) and move it back to where the shortcut expects it to be.

Maybe you are looking for