¿what user should own ICM profiles and stuff?

I'm trying to install the foo2zjs printer driver however, it fails in the make install, because it tries to install some files (ICM Profiles) and giving them to the lp user (using the install command). However, arch doesn't have this user. I know I could create it, but I'd like to know instead who is the user suposed to own that kind of file in arch, so I change it in the Makefile and it's more in the arch way (heck, I'm even making a pkgbuild, so it would be great if someone told me how to do it, so I upload it to the aur and people can get their hp1018 installed...)

You are going to want to ensure that the EM agent has access to the WLS libraries. Are these all the same version of WLS or do you have a mix of older and newer versions running on the server in question? My usual recommendation is to install the EM agent as the "oracle" user assuming you want a global oracle user, but the key is to ensure the privileges are correct so the simplest solution in this case might be to use one of the existing wls users assuming they have the appropriate privileges. Please don't forget to run the root.sh script at the end of the agent installation unless you have sudo enabled to run the script during the normal EM agent process or you may see privlege errors when deploying JVM diagnostics and such.

Similar Messages

What privileges user should have to install and run weblogic on linux box

What privileges user should have to install and run weblogic on linux box ?

Hello.
Normal user if you don't want to listen to ip port < 1024 or write in protected directories (like /var).
Regards.

MacOS 10.4.11- Unable to update to current recommended Firefox because OS10.5.x is required. Cannot go to 10.5.x, what Firefox should I be running and what security update? And how do I get these updates?

MacOS 10.4.11- Unable to update to current recommended Firefox because OS10.5.x is required. Cannot go to 10.5.x because of various software used that is not 10.5 compatible, what Firefox should I be running and what security update? And how do I get these updates?

OSX 10.4 isn't the only limiting factor that you have, Firefox 4+ versions need an Intel processor.
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/<br />
http://tenfourfox.blogspot.com/ <br />
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
''edit'' <br />
Firefox 3.6.25 has basically the same security updates that the latest Firefox 9 version has - far better then what you now have.

What user should be used when importing a Power Pivot model into SSAS tabular?

I created a Power Pivot model using my own userid.
In SSDT I can import that model but it saves the model in my own My Documents folder. In SSMS, other users can browse the data in that model.
If I tell SSDT to save the model in the Public user's My Documents, the model is not visible in SSMS for anyone to see.
If a colleague imports the model, it can be seen in SSMS but there is no data when it is browsed.
There seems to be a tie up with the user id I used when the model was first created. Is it possible to break that link, or should we have a user id specifically for creating and deploying Power BI models via SSAS tabular?
Propdev

inputComboboxListOfValues
selectOneChoice
inputListOfValues

WHAT USER IS LOGGED IN SAP AND WHERE

i would like to know if there is a way to kow if an sap user is logged in and where.
thank you.

It is not difficult to know what user is logged in. You may check license status directly from different color user id. Or you may check B1UPF.xml.
However for the Where, there is no easy info. You mat check this thread:
Re: How to track twice logins?
Thanks,
Gordon

What user should be used to execute APEXExport

I am attempting to run a command line export.
Usage APEXExport -db -user -password -applicationid -workspaceid -instance -skipExportDate -expSavedReports -debug
-db: Database connect url in JDBC format
-user: Database username
-password : Database password
-applicationid : ID for application to be exported
-workspaceid : Workspace ID for which all applications to be exported
-instance : Export all applications
-skipExportDate : Exclude export date from application export files
-expSavedReports: Export all user saved interactive reports
I have tried the username/password used when I login to a workspace via GUI and I get 'Exception in thread "main" java.sql.SQLException: ORA-01017: invalid username/password; logon denied'
I have tried a login/password used when I run sql statements via pl/sql developer and I get "Invalid Workspace ID '8626806422310253' for User 'crmit'". I know the workspace is valid, because it is returned when I run "select v('workspace_id') from dual;" in SQLWORKSHOP from within the web interface. this user can see the tables in the FLOWS_030100 schema.
Which username/password should I be using?

Hi!
You can use the user who parse the the Apex application data.
Regards
/Ulf

I've never updated my OS X 10.5.8. What can/should I update to and how do I go about it?

I've never updated my OS X 10.5.8. What can I update to and how do I go about it?

OK, thanks...
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
I highly recommend you upgrade yo 6GBof RAM 1st though...
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
I higly recommend upgrading to 6 GB of RAM first though...
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=298&type=Memory
http://www.everymac.com/systems/apple/imac/specs/imac-core-2-duo-2.66-20-inch-al uminum-early-2008-penryn-specs.html
http://eshop.macsales.com/installvideos/imac_mid_2007_mem/

Cretaing my own profile and framework for ICWebclient.

Hi friends,
Iam new to ICWeb.
I have created my own profile X by cpoying default profile and also copied the framework into my own framework called Y.
Assign the my framework Y to the profile X.
i assigned X(profile) to the position.
When im testing the ICWebclient am getting the following exception.
The runtime repository could not be interpreted
An exception occurred during the internal HTTP communicationException Class CX_BSP_WD_HTTP_RESPONSE_ERROR
Text: The HTTP Response Had the Status 405.
Additional Info: ICM_HTTP_INTERNAL_ERROR
Program: CL_BSP_WD_STREAM_LOADER=======CP
Include: CL_BSP_WD_STREAM_LOADER=======CM002
Source Text Row: 43
i could not understand where am wrong. Can anybody tell me the steps to create my own default profile and framework assign it to the position or is there changes to be done in the framework Y.
i have tested the icwebclient by assigning the default framework to my profile X then its working fine without any exception but if i assign my framework Y to the profile X then its throwing the above error.
Could anybody please suggest me....
Thanks & Regards
Sireesha

That is true.
borosco wrote:
Quick question though, I read in some other thread that QuickTime has trouble interpreting certain Levels while others play well. Is that true?
The QuickTime Player is not fully compatible with all Levels. It's not even documented what it does support. But it's even more complicated than that. The way that the bits can be encoded has many, many, configuration options. Only a subset of the options are supported by the QuickTime Player. If encoded with options it does not support the playback will be choppy or worse. Some of these encoding options are not controllable from the Media Encoder slider bars and drop down boxes. The alternative h.264 encoder from x264pro gives you a "QuickTime Player Compatibility" checkbox to cripple the encode so that it will play on QuickTime Player. In general you don't want to have this on unless you need to because it makes the encode less efficient and thus at a given bitrate it makes it look worse.

I have galaxy note n 7000 and what parametrs should i choose to make job of browser faster and productive

what parametres of content Google Переводчик
Определить язык>английский
what settings should I choose to, and does not buggy korrektnoo otobrzhal konten
Определить язык>английский
Переводчик – главная страница - Главная страница Google
Напишите отзыв.
Версия Поиска:
Мобильная | Полная
©2012 Google - Конфиденциальность

what parametres of content Google Переводчик
Определить язык>английский
what settings should I choose to, and does not buggy korrektnoo otobrzhal konten
Определить язык>английский
Переводчик – главная страница - Главная страница Google
Напишите отзыв.
Версия Поиска:
Мобильная | Полная
©2012 Google - Конфиденциальность

How do I view a video that was sent to me through imessage to my iphone 5S?It was sent by another iphone user.I clicked the link and entered my phone number and the password provided but it still won't open.What should I do?

How do I view a video that was sent to me through imessage to my iphone 5S?It was sent by another iphone user.I clicked the link and entered my phone number and the password provided but it still won't open.What should I do?

Is this your issue > http://support.apple.com/kb/HT5818
If so...
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.

My iphone5 has been hacked, so every message I get in Outlook is addressed to a Fatima Quedas, who is on my list of contacts and has two email addresses, one on gmail and the other my own. I deleted the contact. What else should I do?

My iphone5 has been hacked, so every message I get in Outlook is addressed to a Fatima Quedas, who is on my list of contacts and has two email addresses, one on gmail and the other my own. I deleted the contact. What else should I do?

change your email passwords.

When i try to sync my old ipod touch. it says theres a error. so i update it and reset it and stuff but it still doesnt work. what should i do?

When i try to sync my old ipod touch. it says theres a error. so i update it and reset it and stuff but it still doesnt work. what should i do?

Before you restore the iPod from the backup that Dave had you make yu have to transfer stuff from the iPod to the computer since the backup does not contain the apps themselfes, music, synced phots and some other stuff. To see what a backup contains see:
http://support.apple.com/kb/HT4946
To transfer iTunes purchases:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- For other stuff you need a third-party program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support CommunitiesA lot of thos are paid, especiall for more than a limited number of items. It is harder to find one that does synced photos.

Firefox suddenly won't start and I can't open the profile manager; what else should I do?

Firefox was working. When I went to re-open it the wheel spun, stopped, and then nothing. I search online and it said to create a new profile by running firefox.exe -p. But nothing happened. The support article said that perhaps another version of Firefox was running in the background but not visible and to reboot. I did. No difference. I'm stuck. What else can I do?

I tried Safe Mode, but apparently you need Firefox to start regularly and then hit the menu button to get it to start in Safe Mode next time. Unfortunately I cannot get Firefox to start at all.
I'm going to try to save the profile and then re-install Firefox. However, the "Back up and restore" instructions on how to do this are a bit vague. For example, it tells you how to find your profile file by doing a search. But on my computer the search comes up empty (turns out on my computer the file name has the word "local" in the middle of the phrase given in the instructions.

I have had my Iphone 5 since June. All of a sudden my other is 5.1GB and i'm almost out of space. How do i do i system restore , if thats what i should do and not loose by stuff

have had my Iphone 5 since June. All of a sudden my other is 5.1GB and i'm almost out of space. How do i do i system restore , if thats what i should do and not loose by stuff

Hi jdbarrett1,
Thanks for using Apple Support Communities. This article has steps you can take for issues with "other" data taking up too much space:
iOS: 'Not enough free space' alert when trying to sync
http://support.apple.com/kb/ts1503
Cheers,
- Ari

What Roles should the gwconnector user have in CRM

Hi Guys,
I have setup GWConnector etc and have assigned GWConnector user with full admin rights on the CRM system.
I cannot find any document that tells me what roles this user must have etc?
Could one of you guys either tell me what they should be - or point me to the right documentation as itu2019s not in the groupware setup guide only the AD stuff?
Thanks

Honeslty, that is up to you. I have customers that start off WLC and AP all in the same subnet, but it is not necessary. I also have customers that put the WLC mgmt in the 'server' VLAN, and the AP in their own.
IMHO, I like the WLC to be in 'server' or 'secured' VLAN, then I put the AP in their own VLAN that is locked down to only getting DHCP and talking to the WLC. that way if someone unplugs an AP and connects something they can't get anywhere.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

¿what user should own ICM profiles and stuff?

Similar Messages

Maybe you are looking for