What value(s) (using [putvalue('nidaq',value)]) need to be sent to the ER-8 to open and close individual relays?

I'm attempting to control the ER-8 via a PCI-6052E and SC-2050 adapter board (and associated cables).

The best way to control your ER-8 device using an e-series DAQ board is by following the attached flowchart.
Hope this helps.
Filipe Altoe
Application Engineer
National Instruments
Attachments:
digital.doc ‏25 KB

Similar Messages

I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Appl

I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Apple that it probably is not serious and is coming from the fans in the MacBook. It is true that the smell/odor is more intense when the fans are working. Apple said I should take the MacBook to an Apple Store to have the hardware checked out. Everything seems to be working correctly. I am backing up automatically wirelessly to a Time Capsule, which I had not done until recently, although I had purchased the Time Capsule in 2009. I have not noticed this odor before. Does anyone suspect something more serious that may be going on?

You may be smelling it because with the new OS the processor is having to work harder causing it to get hotter then it would with the other OS. I can't say there is nothing wrong, but what could be happening is just that, it's getting hotter so the fan is spinning faster and moving more air so you are getting more of the smell then you would before. I would still continue to back it up, and take it to the Apple Store at a Genius Bar and have them look at it to make sure. Was the computer ever in a smoky environment??

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

What is the better way to open and close connection in bean

Hello, may i ask about the best way to open and close the connection?
At the first, the connection code is store in Conn class bean. The JSP page will call a method in Process bean to process the query and update of database. the Process bean is using th Conn to connect to database.
In my process bean, it have a method for each type of sql like select, insert, update, and delete for each tables. Each method will call the Conn to open and close the connection. The jsp page can simply call a method retrieve or update records.
However, when calling the processUpdate method, it is a method that update a group of tables base on the query result of another group of tables and calculation. If I calling the query method in the same bean file, it will open and close the connection many times (more than 1000 times). After open and close the connection several times, the connection to mySQL will be fail.
Currently, i include 2 method in Process that is only calling the Conn to open the connection and close connection. When calling the openConnection method, it will also set the boolean connected in the class to true and call Conn to open connection. When calling the closeConnection method, it will also set the boolean connected in the class to false and call Conn to close connection.
After that, i add some change to the query method which is when the connected is false, it will open the connection by calling the Conn and close the connection themself. If the connected is true, it will not call the Conn to open and close the connection because it already connected to the database.
Now, i when i calling the query method in jsp, it can open the connection and close the connection individually. When i call the processUpdate in the jsp, this method will calling the openConnection before calling the query and calling closeConnection at the end. It not only faster the process(less open and close), it also no cause the connect to mySQL fail error again. However, it also make the coding in the bean file more longer and complex.
Is there have any better solution?

Use connection pooling. This will put the connection management in the hands of the webserver, not your code. Check out this post:
http://forum.java.sun.com/thread.jspa?threadID=741788&messageID=4252932#4252932

What value/text to be entered in the trusted point- certification chain space

What value/text to be entered in the trusted point- certification chain space

Yes the certificate is signed by the root CA.
I have two certificates in the certificate chain which was downloaded from the CA.
I have pasted both the certificate in the trusted point and the certificate sections and unable to access UCSM ...invalid certificate error.
The value entered in trusted point and certitificate tabs are same?

What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
How much trade-in value can I get from VZW or BestBuy or Amazon?
Thanks!

http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
DROID Bionic: (9/8 launch) – You already know everything about this device, don’t you?
Samsung Stratosphere: (9/8 launch) – 4G LTE device running Android 2.3
HTC Vigor: (10/6 launch) – Will replace the HTC Thunderbolt
LG Revolution 2: (10/20 launch) – Will replace the original Revolution
Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
Samsung Illusion: (9/29 launch) – 3G smartphone running Android 2.3
Samsung Plato: (January launch) – whatever it is, it was pushed to 2012
HTC Bliss: (9/29 launch) – Lower end Android 2.3 device; the chick phone?
Motorola XOOM 4G LTE: (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

I bought a used iPhone on ebay. when I try to activate it, I get a message that the owner needs to sign in to the device with their appleID and password. I have no way of knowing who the owner is. How can I get around this?

I bought a used iPhone on ebay. when I try to activate it, I get a message that the owner needs to sign in to the device with their appleID and password. I have no way of knowing who the owner is. How can I get around this?

Check the eBay listing. Did it state the device was Activation Locked? If not, then make a claim as Meg stated and get a refund. You will not be able to activate the phone and no one can help you contact the owner, unless that is the person that sold the device. If they cannot remove the phone from their account because it is not theirs, then refund is your route. Even Apple cannot assist with locating the previous owner.

HT5616 when someone sends me a message with imessage I only get it on either iphone or ipad, what do I need to do to get the message on both iphone and ipad

when someone sends me a message with imessage I only get it on either iphone or ipad, what do I need to do to get the message on both iphone and ipad

You need to make sure that the setting You can be reaached by iMessage at: is the same on both devices or at least have a common entry.

Control valve that opens and closes linearly using DSC

I have to create a control valve that opens and closes linearly.I want to view its variation in percentage wise in the graphical form which uses DSC module.

Hi Gerardjoe,
I'm not sure that I completely understand what you're trying to do. In the DSC modules, the valves (2D and 3D) are simply boolean indicators.
One thing you could do, to see some sort of a percentage change, would be to have an indicator such as a vertical fill slide. Here, you would put a number between 0-100.
Then, you could have a comparison, such that if this value was over, say, 60, then the boolean value would be true and the valve would turn on. Else, the value would be false and the valve would stay false.
I hope that this answers your question; if I did not understand correctly, please do respond and clarify.
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current

IE open and close immediately. Can't fix using many methods.

A user reports that can't use IE 8 suddenly.
His PC is Windows 7 Pro sp1 and using Internet Explorer 8.
Don't know what he did before and he ever tried restore to previous point but no help.
I've tried the following.
1. http://support.microsoft.com/kb/967896
   Reset Internet Explorer to its default settings or
   Uninstall and then reinstall Internet Explorer through Turning on/ off windows features.
2. Use other user like Administrator to open IE. But result is same
3. Upgrade to IE 11. Still open and close immediately only.
   Repeat step 1 but still not solve.
4. Downloaded IE 11 and installed manually but it stated that IE 11 was installed. (Had turned off IE to uninstall it through Turning on/ off windows features)
Asked him to use Chrome but some websites need IE. So he must use IE too.
Please advise that how to fix it.
Hope not need to re-install OS.
Many thnaks.

1. Are there any traces in Event logs?
2. Try to delete history in IE
3. Try to disable add-ons.
4. If nothing helps, analyze your system with Process Monitor and Process Explorer. Check which programs starts with Autoruns (all programs are from Sysinternals)
Regards
Milos

Hi! I have a Creative suite Design Standard 9 Adobe program and I am attempting to make a wizzard form that can be made into an entry form for a competition. So I need to 1. Make the form into a question and answer form that Participants may fill out. 2.

Hi! I have a Creative suite Design Standard 9 Adobe program and I am attempting to make a wizzard form that can be made into an entry form for a competition. So I need to 1. Make the form into a question and answer form that Participants may fill out. 2. make it possible for them to download it via a link on our website 3. make it possible for them to save the info they have written into the form and mail it to the mail we have supplied in the entry form and 4. make it possible for them to put in a jpg. as part of the entry for and lastly 5. make it possible for us to copy paste the document and use it on other platforms. How do I do this - is it at all possible with adobe?

Those requirements are go way beyond what PDF forms can do and are meant for, some of them would require involving other programs or are mutually exclusive and contradictory. You are wasting your time even thinking about doing this as an "offline" PDF form. Simply sign up for an online forms/ survey service like FormsCentral or Surveymonkey.
Mylenium

I have an old iMac version 10. 4.11 and I have the iPhone 3GS which I cannot upgrade the latest applications I want to buy the iPhone 4S but I need to back up all the information on my iMac and move it to a different computer contacts songs etc which is t

I have an old iMac version 10. 4.11 and I have the iPhone 3GS which I cannot upgrade the latest applications I want to buy the iPhone 4S but I need to back up all the information on my iMac and move it to a different computer contacts songs etc which is the easiest way to do this

Glenn,
I tried upgrading to leopard, even bought the software and brought it home but it wouldn't let me. So i went back to apple, gave them the specifications of the machine and been told my machine is simply too old for leopard. This is incredible to me because it really isn't THAT old (i think just a little over 6 years maybe) and yet i'm left out on the curb when it comes to using newer apple products. I understand technology moves on but the mindset that i am supposed to dump a perfectly working machine after a couple of years or face not being able to use any other apple product is counter to what thought apple was about.

Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

I just got my mac a month ago so go easy on me but I was just working with the pages that was already on it, and then today I know it updated, and now I am unable to open a lot of my documents!:( Idk what you mean by the icloud version lol sorry! As for the version, when I open pages from my apps and click 'about' it says version 5.1? And when I open the document it just goes grey and kind of blinks and doesnt open? No error message or any indication of why it will not open now when I for sure have opened it in the past! Andddd for the OS X I think it is 10.9.1 ??

Photoshop 12 trial version will open and Close before I can use it

How can I fix this problem when I open Photoshop Elements 12 it opens and closes immediately?

Ralph Hoover
You have posted in the wrong Adobe Forum. If you have Photoshop Elements 12, you should be posting in the Adobe Photoshop Elements Forum, not the Adobe Premiere Elements Forum (video editing).
http://forums.adobe.com/community/photoshop_elements
Either repost your question or wait for a moderator to see your thread and place it in the appropriate forum.
Some questions to think about...
a. How are you opening the program? From the desktop icon? If so, how far do you get....do you get the Welcome Screen and does it stay open? Is it only when you hit Welcome Screen Organizer or Editor Tab that everything closes/disappears?
b. What computer operating system are you running your Photoshop Elements 10 on? What do your computer resources look like? Is your Photoshop Elements 12 issue "it never worked before" or "it worked before but not now"?
Lots more questions. But lots more details needed.
ATR
c.

I'm trying to draw a candlestrick chart without using the open and close fields

I'm trying to draw a candlestrick chart without using the
open and close fields, however I am seeing nothing on the cart. The
horizontal and vertical axis are displaying their labels correctly
for the data. Any ideas what is going on here?

"nikos101" <[email protected]> wrote in
message
news:gi5rh4$ptn$[email protected]..
> Is it not to draw the line between the high and low
then? The data I
> recieve has no open and close data :(
>
I've never seen a candlestick that didn't have all 4
properties.
You may find the floating columns do what you want here
http://demo.quietlyscheming.com/ChartSampler/app.html
or possibly the
vertical line type will work for you.
HTH;
Amy

What value(s) (using [putvalue('nidaq',value)]) need to be sent to the ER-8 to open and close individual relays?

Similar Messages

Maybe you are looking for