What value/text to be entered in the trusted point- certification chain space

Yes the certificate is signed by the root CA.
I have two certificates in the certificate chain which was downloaded from the CA.
I have pasted both the certificate in the trusted point and the certificate sections and unable to access UCSM ...invalid certificate error.
The value entered in trusted point and certitificate tabs are same?

Similar Messages

What types of data are entered in the order type?...

Hello SAP-team!
What types of data are entered in the order type?
- Settlement profile
- Sample order
- Settlement rule
- Order category
- Costing sheet for overhead rates
ps: thanks to SAP-community!
Eugene

Hi,
What types of data are entered in the order type?
- Settlement profile- True
- Sample order -True(by model order)
- Settlement rule-True
- Order category-True
- Costing sheet for overhead rates-False
Regards
Sudhakar Reddy

Text-to-speech crashes at the same point in a document when trying to create an audio file

I like to convert text to audio (large documents), and have been doing this using a 3rd party app for a long time now. The app sometimes crashes at a specific point in a text (i.e. it always crashes at the same point no matter where I start from). The TTS also has, at times crashed even if I am just using hot keys to read a segment outloud. At times, this live-use crash prevents me from using tts until I reset my computer. Just recently realized I can use an automator action to convert a text to audio without using a 3rd party app. The automator action also crashes and, after it does so, automator app won't open again without reseting my computer.

By the way, I have only had my shuffle for 3 months
and it is doing this. Are problems this soon normal
or did I get a dud?
I have only had a Shuffle for one week. I returned the first one to the store after a few days and they gave me another which appears to do exactly the same thing. My hunch is that it is not time-related; indeed, I cannot think of anything in the Shuffle that would change over time in this way, as it has nothing to "wear out" per se (except switches and a battery).
I do not hear any pops on mine - it just stops neatly at the end of a random song. Yesterday it went a very long time (about 4 hours) before this happened.
Mu hunch is that it is tied to the "randomizing" function within the Shuffle. When you use a playlist in random mode, every iPod effectively creates an "on the fly" randomized list. Perhaps the Shuffle goofs this up and places some gibberish in the list. This makes sense as the issue appears to be non-existent in the "non-random" mode.
I will try a few more tricks, such as different USB ports and perhaps rebuilding my Library. Seems a pain in the rear for stuff that otherwise works fine!

What values can be used to set the SI_PROCESSINFO.SI_LOCALE?

Post Author: Nadine
CA Forum: Other
In the following VBA program, the SI_Locale property gets set when a WEBI report gets scheduled as a PDF (Webi.ProcessingInfo.Properties.Add "SI_Locale", "fr" ). What are the values that can be set for this property?
Do they conform to an ISO standard?
' [VBA; BOE XI R2; COM SDK; SP2 FP24] Dim Mein_Info_Store As CrystalInfoStoreLib.InfoStore Set Mein_Info_Store = Info_Store Dim Query As String Query = "Select TOP 1 * " & _ "From CI_INFOOBJECTS " & _ "Where SI_NAME = 'International'" Dim Liste As CrystalInfoStoreLib.InfoObjects Set Liste = Mein_Info_Store.Query(Query)
Dim Info As CrystalInfoStoreLib.InfoObject Set Info = Liste.Item(1) Dim Webi As CrystalWebiPluginLib.Webi Set Webi = Info.PluginInterface("WebI") Dim Plan As CrystalInfoStoreLib.SchedulingInfo Set Plan = Webi.SchedulingInfo Dim Verarbeitung As CrystalInfoStoreLib.ProcessingInfo Set Verarbeitung = Webi.ProcessingInfo Dim Eigenschaften As CrystalInfoStoreLib.Properties Set Eigenschaften = Verarbeitung.Properties Webi.WebiFormatOptions.Format = CrystalWebiPluginLib.CeWebiFormat.ceWebiFormatPDF Plan.Type = CrystalInfoStoreLib.CeScheduleType.ceScheduleTypeOnce Plan.BeginDate = Now Plan.RightNow = True On Error Resume Next Eigenschaften.Delete "SI_LOCALE" Eigenschaften.Add "SI_LOCALE", "es" Webi.Title = "International_PDF_Spanisch" Mein_Info_Store.Schedule Liste Eigenschaften.Delete "SI_LOCALE" Eigenschaften.Add "SI_LOCALE", "fr" Webi.Title = "International_PDF_Französisch" Mein_Info_Store.Schedule Liste Eigenschaften.Delete "SI_LOCALE" Eigenschaften.Add "SI_LOCALE", "en-GB" Webi.Title = "International_PDF_Englisch" Mein_Info_Store.Schedule Liste Eigenschaften.Delete "SI_LOCALE" Eigenschaften.Add "SI_LOCALE", "en-US" Webi.Title = "International_PDF_Amerikanisch" Mein_Info_Store.Schedule Liste

Hi
In addition to John's answer, inside Discoverer you can do this:
Let's assume you have a Status item and it has the values you mention. If you create the following new calculation SUM(ROWNUM) and name it Status Count you only need to include the Status and the Status Count in the worksheet. You will now see a count for each status.
Best wishes
Michael

What do I need to enter in the server box to connect to my windows 7 pc?

I have connected my windows 7 pc to my mac via ftp and copied a folder across to my mac now I want to transfer it back again and I don't know what I need to type into the server box I know username, password and port it is just server that I am not sure about.

The SharePoint PowerShell cmdlets must be run on a SharePoint server in the farm. They cannot be run on a server that is not in the farm.
If the script is running on a machine that does not have SharePoint, you could instead use PSRemoting in the script to connect to a SharePoint server and run the code remotely.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Set all JLabels to end at the same point

I have a panel that display rows of:
label +text area
label +text fiels ....
each row has a couple of elements in it.
I order each row in an Horizental Box ended with an Horizontal glue .
and wrapped all Horizontal Boxes to a Vertical Box that is placed
as the north element in the panel(Border Layout).
I need to set all the labels to end at the same point how can I do that
In a generic way?
thanks liat

The label size is set according to the text on it....
my problem is I want the label to be aligned to the same point at the end!!!!(from right)
while the text on the label is aligned to the left:
it should be like this
lbl1************* textField1
lbl2xxxxxxxxxx textFiels2
meaning no matter what is the text - all labels end at the same point
anyway ....thanks

Problem setting project end point (can't access the end point marker)

I can't seem to set my project end point because the slider control that adjusts the spacing of the measures is obstructing my pointer from being able to click on the end point marker. Any hints as to how I can move the coation of this slider control so that I can access the end point marker with my pointer?

6ftmama wrote:
FYI - the end point marker now turns into a bracket when you hover over it.
THe End-of-Project Marker doesn't change at all. What you see is a change of the Mouse Pointer.
This is called a "Click Zone" where the Mouse Pointer changes to different shapes when moving over or click on an object or an area in the window.
Here the Mouse Pointer changes to "Trim Tool" or "Resize Tool".
Pointer Tool:
Resize Tool:
It is the same Tool wne you move the Mouse Pointer of the right edge of a Region to resize its length.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?

Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?
Picture below, many thanks for your help.
Jason

Back up all data before proceeding.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
Start up in safe mode to rebuild the font caches. Restart as usual and test.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
If you still have problems, then from the Font Book menu bar, select
File ▹ Restore Standard Fonts...
You'll be prompted to confirm, and then to enter your administrator login password.
Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

ADD ITEMS TO DROPDOWN BOX FROM A TEXT FIELD(USER ENTERS THE ITEM) AND BOUND VALUE ALSO

I WANT TO ADD ITEMS THE DROPDOWN BOX FROM THE TEXT FIELD(ITEM NAME) WHERE USER ENTER'S THE ITEM DESCRIPTION
AND BOUND VALUE ALSO SHOULD BE ADDED TO THE SAME ITEM.
SAME WAY REMOVE ITEMS FROM DROPDOWN BOX
PLEASE GIVE SAMPLE FORM OR JAVASCRIPT FOR THE ABOVE SCENARIO.....
INDEED HELPFUL FOR MY PROJECT PLEASE SEND ATTACHED PDF FORM

Hi Praveen,
Your form is not shared so I have not been able to access it. But I have updated mine. There are now two approaches, one that follows on from the above method and updates each drop down list in each row. The second updates a separate dataset that the drop down list is bound to. This second approach requires the remerge() method which can cause problems if your code has updates some form properties like a borders color as these will be reset, but the code is simplier and you will only have one list to maintain. The add button click code is;
var particulars = xfa.datasets.resolveNode("particulars");
if (particulars === null)
    particulars = xfa.datasets.createNode("dataGroup","particulars");
    xfa.datasets.nodes.append(particulars);
var particular = xfa.datasets.createNode("dataValue","particular");
particular.value = ItemName.rawValue;
var boundValue = xfa.datasets.createNode("dataValue","id");
boundValue.value = BoundValue.rawValue;
particular.nodes.append(boundValue);
boundValue.contains = "metaData";
// find sorted position to insert
for (var i = 0; i < particulars.nodes.length; i++)
    p = particulars.nodes.item(i);
    if (p.value > particular.value)
      particulars.nodes.insert(particular, p);
             break;
// add to end if greater than all existing items
if (particular.parent === null)
    particulars.nodes.append(particular);
// clear source fields
ItemName.rawValue = null;
BoundValue.rawValue = null;
// remerge form data to pick up new item
xfa.form.remerge();
And the binding looks like;
I have updated my sample to include both methods, https://workspaces.acrobat.com/?d=OwysfJa-Q3HhPtFlgRb62g
Regards
Bruce

What values do I enter in the program change field for EXS24 ?

I am using YaMAHA WX5 WIND CONTROLLER to play instrument sin Logic. I can get 'next settings' and 'previuos settings' to work with cc values. However, because of the setup of the WX, it wouls work better for me if I coud use its program change buttons.
What value should go in the program change box ?
OPEn EXS24
click edit
navigate edit>preferences>select previous instrument or next instrument
afer that what value will allow EXS24 to change instruments using my WX5.
I have used MIDI monitor to find what value the WX sends and the only think that shows up is 'program'
I have tried learn assignment in Logic. When I press the program change button, Logic reads it as program change but provides no value.
Thanks

any one?

ALV report editable to enter text and print with including the text?

Hi all,
I have to display output of a report in ALV format and i have to make two fileds can be editable to enter texts by user and able to print the list with that texts .
Is it possible using standard Function modules or I have to go for OO methods? Please give the sample code ?
Thanks,
Vamshi
Edited by: VAMSHI KRISHNA on Oct 31, 2008 4:25 PM

Hi Vamshi,
Check out the Below sample code for the editable ALV.
*& Report Z7CC_OOPS_ALV_EDITABLE
report z7cc_oops_alv_editable.
tables sflight.
data: begin of gt_outtab occurs 0.     "with header line
        include structure sflight.
data: celltab type lvc_t_styl.
data: end of gt_outtab.
data: gt_fieldcat type lvc_t_fcat.
data: g_carrid like sflight-carrid,
      g_connid like sflight-connid.
data: gs_spfli type spfli.                                  "#EC NEEDED
data: g_custom_container type ref to cl_gui_custom_container.
data: g_container type scrfname value 'BCALV_GRID_DEMO_0100_CONT1'.
data: g_grid type ref to cl_gui_alv_grid.
data: wa_outtab like gt_outtab.
*       CLASS lcl_event_receiver DEFINITION
class lcl_event_receiver definition.
public section.
    types: begin of sflight_key.
    types:   carrid type s_carr_id.
    types:   connid type s_conn_id.
    types:   fldate type s_date.
    types: end of sflight_key.
    types: sflight_keys type standard table of sflight_key,
           sflight_table type standard table of sflight.
    methods:
      handle_data_changed
         for event data_changed of cl_gui_alv_grid
             importing er_data_changed.
    methods:
      get_inserted_rows
           exporting
              inserted_rows type sflight_keys.
    methods:
      get_deleted_rows
          exporting
              deleted_rows type sflight_table.
    methods:
       refresh_delta_tables.
    methods: set_table_is_initial.
    methods: set_table_is_not_initial.
    methods: table_is_initial
                returning value(initial) type char01.
private section.
* §4.Define internal tables to remember inserted and deleted lines,
*    thus the delta between input made after the last saving.
    data: inserted_rows type sflight_keys,
          deleted_rows type standard table of sflight.
* This flag is set if any error occured in one of the
* following methods:
    data: error_in_data type c.
* This flag signals that no records were read for the flight
* table initially:
    data: initial_table type c.
** Methods to modularize event handler method HANDLE_DATA_CHANGED:
    methods:
      check_double_entries
         importing
            pr_data_changed type ref to cl_alv_changed_data_protocol.
    methods:
      update_delta_tables
         importing
            pr_data_changed type ref to cl_alv_changed_data_protocol.
    methods:
      perform_semantic_checks
         importing
            pr_data_changed type ref to cl_alv_changed_data_protocol.
    methods:
      get_cell_values
           importing
             row_id          type int4
             pr_data_changed type ref to cl_alv_changed_data_protocol
           exporting
             key             type sflight_key.
endclass.                    "lcl_event_receiver DEFINITION
class lcl_event_receiver implementation.
method handle_data_changed.
*    data: ls_good type lvc_s_modi,
*          l_price type s_price,
*          ls_new type lvc_s_moce.
*    error_in_data = space.
** check if there exist double entries
*    call method check_double_entries( er_data_changed ).
** remember new or deleted lines for saving
*    call method update_delta_tables( er_data_changed ).
** check mt_good_cells semantically
*    call method perform_semantic_checks( er_data_changed ).
*    if error_in_data = 'X'.
*      call method er_data_changed->display_protocol.
*    endif.
endmethod.                    "handle_data_changed
method check_double_entries.
    data: lt_good_cells type lvc_t_modi,
          ls_good type lvc_s_modi,
          ls_key type sflight_key,
          ls_sflight type sflight,
          l_flightdate like gt_outtab-fldate,
          l_del_row type lvc_s_moce,
          ls_outtab like line of gt_outtab,
          l_reentered type c.
* §5.Check if there exist already other records with equal key fields.
* Check if the user has entered two new lines where the key fields
* are equal.
* Since CARRID and CONNID are read only, the check is restrained
* to field FLDATE.
* Algorithm: Copy all entries in MT_GOOD_CELLS to a dummy table.
*            During the copying procedure check if there exists
*            already a line with the same Flight date.
*    loop at pr_data_changed->mt_good_cells into ls_good.
*      case ls_good-fieldname.
*        when 'FLDATE'.
*          call method pr_data_changed->get_cell_value
*                      exporting
*                            i_row_id = ls_good-row_id
*                            i_fieldname = ls_good-fieldname
*                      importing e_value = l_flightdate.
*          read table lt_good_cells with key
*                            value = l_flightdate
*                            transporting no fields.
*          if sy-subrc = 0.
** There exists already a line with the same flight date!
*            call method pr_data_changed->add_protocol_entry
*                         exporting
*              i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
*              i_msgv1 = text-m01
*              i_fieldname = ls_good-fieldname
*              i_row_id = ls_good-row_id.
*            error_in_data = 'X'.
*          else.
*            ls_good-value = l_flightdate.
*            append ls_good to lt_good_cells.
*          endif.
*      endcase.
*    endloop.
** Check if any new entries already exist in gt_outtab.
** At this point, lt_good_cells contains only lines with
** FIELDNAME = 'FLDATE'.
*    loop at lt_good_cells into ls_good.
*      l_flightdate = ls_good-value.      "flightdate, see above
*      read table gt_outtab with key
*                    carrid = g_carrid
*                    connid = g_connid
*                    fldate = l_flightdate
*                    transporting no fields.
*      if sy-subrc = 0.
** Check if this entry was deleted before, i.e. it is in the table
** of deleted rows. If so, the entry does not exist twice. The user
** has deleted a line and then reentered it.
*        l_reentered = space.
*        loop at pr_data_changed->mt_deleted_rows into l_del_row.
*          read table gt_outtab into ls_outtab index l_del_row-row_id.
*          if sy-subrc ne 0.
*            message i000(0k) with text-e01."Fehler beim Löschen
*          elseif
*                    ls_outtab-carrid eq g_carrid
*                and ls_outtab-connid eq g_connid
*                and ls_outtab-fldate eq ls_good-value.
*            l_reentered = 'X'.
*          endif.
*        endloop.
*        if l_reentered ne 'X'.
*          call method pr_data_changed->add_protocol_entry
*                         exporting
*              i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
*              i_msgv1 = text-m01
*              i_fieldname = ls_good-fieldname
*              i_row_id = ls_good-row_id.
*          error_in_data = 'X'.
*        endif.
*      endif.
*    endloop.
** In this demo report you may prevent the selection
** of data by setting parameter 'p_ds'.
** If this is done, the next check is required:
*    if me->table_is_initial( ) eq 'X'.
*      call method get_cell_values
*           exporting row_id          = 1
*                     pr_data_changed = pr_data_changed
*           importing key             = ls_key.
*      select single * from sflight into ls_sflight
*                where carrid = ls_key-carrid
*                  and connid = ls_key-connid
*                  and fldate = ls_key-fldate.
*      if sy-subrc = 0.
*        call method pr_data_changed->add_protocol_entry
*                       exporting
*            i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
*            i_msgv1 = text-m01
*            i_fieldname = 'FLDATE'
*            i_row_id = 1.
*        error_in_data = 'X'.
*      endif.
** flag initial_table is reset in method 'update_delta_tables'
*    endif.
endmethod.                    "check_double_entries
method update_delta_tables.
*    data: l_ins_row type lvc_s_moce,
*          l_del_row type lvc_s_moce,
*          ls_key type sflight_key,
*          ls_sflight type sflight,
*          ls_outtab like line of gt_outtab.
** §6.Use protocol attributes MT_DELETED_ROWS and MT_INSERTED_ROWS
**    to remember which lines where deleted or inserted. Save this
**    information in your internal tables.
** deleted rows
*    loop at pr_data_changed->mt_deleted_rows into l_del_row.
*      read table gt_outtab into ls_outtab index l_del_row-row_id.
*      if sy-subrc ne 0.
*        message i000(0k) with text-e01."Fehler beim Löschen
*      else.
*        move-corresponding ls_outtab to ls_sflight.
** It should no be possible that the same line is deleted twice,
** so we just add the new key line to 'deleted_rows'.
*        append ls_sflight to deleted_rows.
** If this line was inserted just before it is deleted:
*        delete me->inserted_rows
*             where carrid = ls_outtab-carrid
*             and   connid = ls_outtab-connid
*             and   fldate = ls_outtab-fldate.
*      endif.
*    endloop.
** inserted rows
** At this point ALV has not added new lines
** to gt_outtab, so you can not access their values
** by reading gt_outtab.
** Table MT_GOOD_CELLS holds new values that can be
** referenced using the ROW_ID.
*    if me->table_is_initial( ) eq 'X'.
** No flights were selected initially. This is the first new line.
*      call method get_cell_values
*            exporting row_id          = 1
*                      pr_data_changed = pr_data_changed
*            importing key             = ls_key.
*      append ls_key to inserted_rows.
*      call method me->set_table_is_not_initial.
*    endif.
*    loop at pr_data_changed->mt_inserted_rows into l_ins_row.
*      call method get_cell_values
*              exporting row_id          = l_ins_row-row_id
*                        pr_data_changed = pr_data_changed
*              importing key             = ls_key.
**      READ TABLE gt_outtab INTO ls_outtab INDEX l_ins_row-row_id.
** Just insert the new row regardless if the input is wrong
*      append ls_key to inserted_rows.
*    endloop.
endmethod.                    "update_delta_tables
method get_cell_values.
* get values of key cells of row ROW_ID
** CARRIER
*    call method pr_data_changed->get_cell_value
*          exporting
*                 i_row_id    = row_id
*                 i_fieldname = 'CARRID'
*               importing
*                 e_value = key-carrid.
*    if sy-subrc ne 0.
*      message i000(0k) with text-e02. "Fehler beim Einfügen
*    endif.
** CONNID
*    call method pr_data_changed->get_cell_value
*          exporting
*                 i_row_id    = row_id
*                 i_fieldname = 'CONNID'
*               importing
*                 e_value = key-connid.
*    if sy-subrc ne 0.
*      message i000(0k) with text-e02. "Fehler beim Einfügen
*    endif.
** FLDATE
*    call method pr_data_changed->get_cell_value
*          exporting
*                 i_row_id    = row_id
*                 i_fieldname = 'FLDATE'
*               importing
*                 e_value = key-fldate.
*    if sy-subrc ne 0.
*      message i000(0k) with text-e02. "Fehler beim Einfügen
*    endif.
endmethod.                    "get_cell_values
method perform_semantic_checks.
*    data: ls_good type lvc_s_modi,
*          l_planetype type s_planetye,
*          l_seatsmax type s_seatsmax.
*    loop at pr_data_changed->mt_good_cells into ls_good.
*      case ls_good-fieldname.
*        when 'PLANETYPE'.
*          call method pr_data_changed->get_cell_value
*             exporting
*               i_row_id = ls_good-row_id
*               i_fieldname = ls_good-fieldname
*             importing
*               e_value = l_planetype.
*          select single seatsmax from saplane into l_seatsmax
*                        where planetype = l_planetype.
*          if sy-subrc ne 0.
*            call method pr_data_changed->add_protocol_entry
*                            exporting
*                 i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
*                 i_msgv1 = text-m02
*                 i_fieldname = ls_good-fieldname
*                 i_row_id = ls_good-row_id.
*            error_in_data = 'X'.
*          else.
*            call method pr_data_changed->modify_cell
*              exporting i_row_id    = ls_good-row_id
*                        i_fieldname = 'SEATSMAX'
*                        i_value     = l_seatsmax.
*          endif.
*      endcase.
*    endloop.
endmethod.                    "perform_semantic_checks
method get_inserted_rows.
*    inserted_rows = me->inserted_rows.
endmethod.                    "get_inserted_rows
method get_deleted_rows.
*    deleted_rows = me->deleted_rows.
endmethod.                    "get_deleted_rows
method refresh_delta_tables.
*    clear me->inserted_rows[].
*    clear me->deleted_rows[].
endmethod.                    "refresh_delta_tables
method set_table_is_initial.
*    initial_table = 'X'.
endmethod.                    "set_table_is_initial
method set_table_is_not_initial.
*    initial_table = space.
endmethod.                    "set_table_is_not_initial
method table_is_initial.
*    if initial_table = 'X'.
*      initial = 'X'.
*    else.
*      initial = space.
*    endif.
endmethod.                    "table_is_initial
endclass.                    "lcl_event_receiver IMPLEMENTATION
data: g_verifier type ref to lcl_event_receiver.
data: g_max type i value 100.
data: gs_layout type lvc_s_layo.
data: ok_code like sy-ucomm,
      save_ok like sy-ucomm.
parameters: p_ds type c as checkbox.   "delete selection
select-options s_carrid for sflight-carrid
                            no intervals no-extension default 'LH'.
select-options s_connid for sflight-connid
                           no intervals no-extension default '0400'.
start-of-selection.
g_carrid = s_carrid-low.
g_connid = s_connid-low.
* first check airline and connection
select single * from spfli into gs_spfli
                     where carrid = g_carrid
                     and connid = g_connid.
call screen 100.
*&      Module STATUS_0100 OUTPUT
*       text
module status_0100 output.
set pf-status 'MAIN100'.
set titlebar 'MAIN100'.
if g_custom_container is initial.
    perform create_and_init_alv changing gt_outtab[]
                                         gt_fieldcat.
endif.
endmodule.                 " STATUS_0100 OUTPUT
*&      Form create_and_init_alv
*       text
*      <--P_GT_OUTTAB[] text
*      <--P_GT_FIELDCAT text
form create_and_init_alv changing pt_outtab like gt_outtab[]
                                  pt_fieldcat type lvc_t_fcat.
data: lt_exclude type ui_functions.
create object g_custom_container
         exporting container_name = g_container.
create object g_grid
         exporting i_parent = g_custom_container.
* Create Objekt to verify input values.
* (This object is already needed in form SELECT_DATA).
create object g_verifier.
* SET HANDLER g_verifier->handle_data_changed FOR g_grid.
perform select_data changing pt_outtab[].
perform build_fieldcat changing pt_fieldcat.
perform exclude_tb_functions changing lt_exclude.
gs_layout-stylefname = 'CELLTAB'.
call method g_grid->set_table_for_first_display
    exporting
      it_toolbar_excluding = lt_exclude
      is_layout            = gs_layout
    changing
      it_fieldcatalog      = pt_fieldcat
      it_outtab            = pt_outtab[].
* Set editable cells to ready for input initially
call method g_grid->set_ready_for_input
    exporting
      i_ready_for_input = 1.
endform.                    " create_and_init_alv
*&      Form select_data
*       text
*      <--P_GT_OUTTAB text
form select_data changing pt_outtab like gt_outtab[].
data: lt_sflight type table of sflight,
        ls_sflight type sflight,
        ls_outtab like line of gt_outtab,
        l_index type i,
        ls_spfli type spfli,                                "#EC NEEDED
        lt_celltab type lvc_t_styl.
* Check parameter 'p_ds'=>optionally select no data
if p_ds is initial.
* Select data from sflight
    select * from sflight into table lt_sflight up to g_max rows
                     where carrid = g_carrid
                       and connid = g_connid.
endif.
if sy-subrc ne 0 or not p_ds is initial.
* no flights were found!
* We provide some default values for the first line that is entered:
    ls_outtab-carrid = g_carrid.
    ls_outtab-connid = g_connid.
    case g_carrid.
      when 'LH'.
        ls_outtab-currency = 'DEM'.
      when others.
        ls_outtab-currency = 'US'.
    endcase.
    ls_outtab-seatsocc = 0.
    ls_outtab-paymentsum = 0.
* set fields FLDATE, PRICE and PLANETYPE to editable
    perform fill_celltab using 'RW'
                         changing lt_celltab.
    insert lines of lt_celltab into table ls_outtab-celltab.
    append ls_outtab to pt_outtab.
* Tell Verify-Objekt that the table was initial
    call method g_verifier->set_table_is_initial.
else.
    call method g_verifier->set_table_is_not_initial.
* move corresponding fields from lt_sflight to gt_outtab
    loop at lt_sflight into ls_sflight.
      move-corresponding ls_sflight to ls_outtab.
      append ls_outtab to pt_outtab.
    endloop.
* §3.Set all cells of the table non-editable by using the style table.
    loop at pt_outtab into ls_outtab.
      l_index = sy-tabix.
      refresh lt_celltab.
      perform fill_celltab using 'RO'
                        changing lt_celltab.
* Copy your celltab to the celltab of the current row of gt_outtab.
      insert lines of lt_celltab into table ls_outtab-celltab.
      modify pt_outtab from ls_outtab index l_index.
    endloop.
endif.
endform.                               " select_data
*&      Form fill_celltab
*       text
*      -->VALUE(P_MODE) text
*      -->PT_CELLTAB     text
form fill_celltab using value(p_mode)
                  changing pt_celltab type lvc_t_styl.
data: ls_celltab type lvc_s_styl,
        l_mode type raw4.
* This forms sets the style of columns 'PRICE', FLDATE and PLANETYPE
* editable
if p_mode eq 'RW'.
    l_mode = cl_gui_alv_grid=>mc_style_enabled.
else.                                "p_mode eq 'RO'
    l_mode = cl_gui_alv_grid=>mc_style_disabled.
endif.
ls_celltab-fieldname = 'FLDATE'.
ls_celltab-style = l_mode.
insert ls_celltab into table pt_celltab.
ls_celltab-fieldname = 'PRICE'.
ls_celltab-style = l_mode.
insert ls_celltab into table pt_celltab.
ls_celltab-fieldname = 'PLANETYPE'.
ls_celltab-style = l_mode.
insert ls_celltab into table pt_celltab.
endform.                               " FILL_CELLTAB
*&      Form BUILD_FIELDCAT
*       text
*      <--P_GT_FIELDCAT text
form build_fieldcat changing pt_fieldcat type lvc_t_fcat.
data ls_fcat type lvc_s_fcat.
call function 'LVC_FIELDCATALOG_MERGE'
    exporting
      i_structure_name = 'SFLIGHT'
    changing
      ct_fieldcat      = pt_fieldcat.
loop at pt_fieldcat into ls_fcat.
    if    ls_fcat-fieldname eq 'PRICE'
       or ls_fcat-fieldname eq 'PLANETYPE'
       or ls_fcat-fieldname eq 'FLDATE'.
* §1.Set status of columns FLDATA, PRICE and PLANETYPE to editable.
*    Since all cells are set to non-editable (see step 3) the cells
*    of this columns will only be editable for new lines.
      ls_fcat-edit = 'X'.
* Field 'checktable' is set to avoid shortdumps that are caused
* by inconsistend data in check tables. You may comment this out
* when the test data of the flight model is consistent in your system.
      ls_fcat-checktable = '!'.        "do not check foreign keys
      modify pt_fieldcat from ls_fcat.
    elseif ls_fcat-fieldname = 'CARRID'
       or ls_fcat-fieldname = 'CONNID'
       or ls_fcat-fieldname = 'CURRENCY'.
* §2.Use field AUTO_VALUE of the fieldcatalog to preset values when new
*    lines are added.
      ls_fcat-auto_value = 'X'.
      ls_fcat-checktable = '!'.   "do not check foreign key relations
      modify pt_fieldcat from ls_fcat.
    endif.
endloop.
endform.                    "build_fieldcat
*&      Form exclude_tb_functions
*       text
*      <--P_LT_EXCLUDE text
form exclude_tb_functions changing pt_exclude type ui_functions.
data ls_exclude type ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_undo.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
append ls_exclude to pt_exclude.
endform.                               " EXCLUDE_TB_FUNCTIONS
*&      Module USER_COMMAND_0100 INPUT
*       text
module user_command_0100 input.
save_ok = sy-ucomm.
clear ok_code.
case save_ok.
    when 'SAVE'.
*      perform save_data.
    when 'BACK'.
* §10.Unlock your database table.
*      perform unlock_sflight.
      leave to screen 0.
    when 'EXIT'.
      perform exit_program.
    when 'ADD'.
      perform add_line_item.
    when others.
*     do nothing
endcase.
endmodule.                 " USER_COMMAND_0100 INPUT
*       FORM EXIT_PROGRAM                                             *
form exit_program.
leave program.
endform.                    "exit_program
*&      Form ADD_LINE_ITEM
*       text
* --> p1        text
* <-- p2        text
form add_line_item .
data: lt_rows type lvc_t_row.
data: wa_rows type lvc_t_row with header line.
data: tabix type sy-tabix.
*&Find the row ( index ) number
call method g_grid->get_selected_rows
          importing et_index_rows = lt_rows.
call method cl_gui_cfw=>flush.
read table lt_rows into wa_rows index 1.
tabix = wa_rows-index .
insert gt_outtab index tabix.
*REFRESH_TABLE_DISPLAY
call method g_grid->refresh_table_display
* EXPORTING
*    IS_STABLE      =
*    I_SOFT_REFRESH =
* EXCEPTIONS
*    FINISHED       = 1
*    others         = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " ADD_LINE_ITEM
Thanks,
Chidanand

How to retrieve the Text entered in the Text Box provided in the UWL Inbox

Hi Experts,
I have created a workflow with user decision task. for that task in UWL inbox i provided a text box using XML Code, but i couldnt retrieve the Text entered in the text box. I hope the text will automatically upload in the "_Attach_object" container element of the Workflow, but it couldnt upload in that, If anyone can help me to solve this issue.
Thanks & Regards,

Hi,
<ItemType name="uwl.task.webflow.decision.TS91100000" connector="WebFlowConnector" defaultView="DefaultView">
<ItemTypeCriteria connector="WebFlowConnector" externalType="TS91100000"/>
<Actions>
<Action name="accept" groupAction="yes" handler="UserDecisionHandler">
   <Properties>
    <Property name="decisionKey" value="2"/>
    <Property name="UserDecisionNote" value="true"/>
   </Properties>
</Action>
<Action name="reject" groupAction="yes" handler="UserDecisionHandler">
   <Properties>
    <Property name="decisionKey" value="1"/>
   </Properties>
</Action>
</Actions>
</ItemType>
I have implemented the above code and i got the Text Box, but now the problem is i couldnt retrieve the
text entered in the Text box. I checked in the attachobjects   container element related to the task and the subsequent task but the text is not appearing there. Can you help me to get the text entered in the text box.
Thanks & Regards,
Manikandan.S

Copy the caption and value text from a pdf form to a word doc.

I designed a form to be used by nurses for entering data. They then want to copy the info into a text editor of a program (similar to word). When they copy paste it only copies the field and not the values entered. Any fixes?

When the form I designed for some nurses is used, the information has to be copied and then pasted into a text editor program for a patient file. When I do a select all and copy, it only copies the fields, not the information entered by the nurses. Is there a way to allow all of the fields and text entered to be copied and then pasted in the editor program?

Display instantly the length of the text entered in the rich text editor

Hi everybody,
I'm developing an apex application with apex 4.1.1 and Oracle 11.2.
I have a page in which I have a form that allows to create a new message on the database.
A message has a title, description, text and date.
For the text I use the item "rich editor text". The problem is that item doesn't show the length of characters entered (character counter for the textarea). In the database the corresponding column is varchar2(2000). What I do is a validation after submit that checks if the limit 2000 was exceeded or not.
But what I want to do more is to display instantly the length of the text entered in the editor. I have tried to do that through a dynamic action. But the event "onChange" for the item "rich text editor" didn't work.
Has anyone any idea about that issue?
Thanks for helping.
Kind regards,
Edited by: Khadija Khalfallah on Apr 25, 2013 4:06 AM

sorry about that, I missed that tidbit in your OP... well I think there is a good reason why there isn't a count character option -- due to the hidden "html" characters responsible for the "richness" (bold/color, etc) applied to the text would be difficult to count true characters.. if I was bent on doing this, I'd continue using the item you are using, but have a HIDDEN text area that is updated via javascript onkeyup for each keystroke (again, keeping in mind you'd have to filter certain keys) and then that intelligence could be used. I would probably dig through the javascript responsible for the rich text editor (is it still fckeditor??) -- there might already be code in there that isn't clearly visible to you that does this already.. alas, I see now the validity of your challenge.

How to display texts automatic. besides entered value for a field in Trans.

How to display texts automatically besides the entered value for a field in a standard transaction screen. For example you have a value table and a text table associated to it. Then on entering the value field and pressing enter the text associated should get displayed immediately besides the value. Like if you have 'LOC' as the value and 'Location' as the text associated to it, on entering this value 'LOC', you automatically get the text 'Location' printed besides it automatically in a transaction screen ?
Message was edited by: Sarika Kedia

Hi sarika,
Welcome to SDN.
1. first of all, such display of text,
   is not automatic.
   (it appears to be automatic)
2. At design time,
   a) take one extra field for text
     and mark it as OUTPUT ONLY
3. Then in PBO coding,
    call some module, and in that module
    write code
4. The code should be to
   select from TEXT Table
   into the work area.
EG. THE SCREEN TEXT FIELD NAME IS
T510A-FIELDNAME.
CLEAR t510a.
SELECT SINGLE * FROM t510a INTO t510a
WHERE trfar = FIELVALUE.
5. This will take care of
   displaying the text value of that field.
regards,
amit m.

What value/text to be entered in the trusted point- certification chain space

Similar Messages

Maybe you are looking for