What varaible is best to use for current fiscal year.

Hello all,
I have few restricted key figures which need to be reported as "for current fiscal year" so which ios the best variable we can use for that.In the filter area I have fiscal year variant and comp code do I have to give users the input ready for fiscal year?
Also then i need comparison between current and previous year for same RKF so I plan to offset the varaible by "-1" .
Thanks

It works for me Bhanu. Last I used that it gave me errors so was not sure.
for YTD i dont see any variable in fiscal year am I looking at wrong place.
can you suggest something
Thanks

Similar Messages

Year To Date for Current Fiscal Year

Hi All,
I have installed BC variable Year To Date for Current Fiscal Year 0I_CFYTD..
foloowing error occurs
Variable 0I_CFYTD could not be replaced..
Do i need to write any code or Please help.....

Hi,
Please check if fiscal year variant is used in the filter. Else the BC variable throws an error. Drag fiscal year variant to the filter area and set a value or variable input for the same.
Regards,
Satya

Function module to read customer balances for current fiscal year.

Hi,
Could anyone please tell me about the function module which would display the customer credit balances from the FD10n transaction code for teh current fiscal year. that means from july 2010 to july 2011.

Hi,
use the BAPI 'BAPI_AR_ACC_GETCURRENTBALANCE'
CALL FUNCTION 'BAPI_AR_ACC_GETCURRENTBALANCE' "Closing balance of customer account in current fiscal year
EXPORTING
    companycode =               " bapi3007_1-comp_code Company code
    customer =                  " bapi3007_1-customer Customer
IMPORTING
    actual_balance =            " bapi3007_9    Carry forward balance and balance
    return =                    " bapireturn    Return Code
    . " BAPI_AR_ACC_GETCURRENTBALANCE
This method provides a customer's balance for the current fiscal year.
It displays both the balance of standard transactions and the total balance of standard transactions and all special general ledger transactions.
Read the Documentation of the BAPI.
Regards,
Dhina..

What's the best setup / use for Thunderbolt + SSD iMac ?

Hi!
I'm testing one of the new 27" iMacs (i7, 16gb ram, SSD, 2tb internal HD, external Promise Thunderbolt disk)
I have until Monday to decide to keep it or return it and I'm doing this test to see if it would make a good second computer for our editing (primary is 8 core MacPro).
I can either afford this 27" iMac with a Promise Thunderbolt disk OR anoher MacPro with 4 internal disks.
Can someone please share with me how I would get max performance out of the iMac-setup?
Here's what I THINK prior to adding the Thunderbolt disk:
Internal SSD => Lion + apps
Internal HD => imported videofiles, scratchdisk, cache etc. and export disk
But then......... how should the situation change when adding the Thunderbolt drive ?
Is the Thunderbolt so fast, that all video data should be placed there or would I benefit from placing SOME part on the internal HD, and OTHER parts on the external Thunderbolt ?
Or even more complex ........ should I use all three disks (also the SSD) for different parts of the video / process and if so, what's your thoughts?
Or......... would you go for yet another 8 core Macpro without SSD and Thunderbolt??
Thank you for the inputs on this

klp29 wrote:
Or even more complex ........ should I use all three disks (also the SSD) for different parts of the video / process and if so, what's your thoughts?
Or......... would you go for yet another 8 core Macpro without SSD and Thunderbolt??
Are you only using one Thunderbolt disk? If so, IMHO, you're wasting the beauty of TBolt. To make much better use of it will cost a pretty penny, but you end up with a 4, 6, or 8-disk external RAID enclosure. In that, you stuff a bunch of drives and create however many RAID volumes you want. Preferably a couple of separate RAID0 volumes for the speed (raw data on one of them, scratch space on another, backing the raw data up elsewhere).
However, one TBolt disk is really a waste.
Were I buying a Mac right now, I'd get the following:
6-core 3.3GHz Mac Pro
aftermarket SSD (to hell with Apple's pricing)
aftermarket RAM (see above paranthetic)
2 10k WD SATA drives for an internal software-only RAID0 array for scratch
aftermarket ESATA PCIe card
ESATA enclosures with drives
That last bullet is "up to you" bit. You can do 2 external enclosures with RAID0, RAID1, whatever works for storage and speed. And it can be built piece-meal as you need to expand.
Why did I pick the 6-core vs. one of the 2 x 4-core machines? Horsepower, pure and simple. Those 3.3GHz 6-core chips are quick little bastards (compared to the rest of the Mac Pro line) and you really want raw number crunching power vs. a bzillion cores. Put the apps and OS on the SSD. Scratch space on the internal 10K drives. Then figure out how to split the storage up with your external enclosures.
When you're ready, grab a Quadro 4K card and enhance your video editing speed substantially.
jas

Crystal report formulas to view revenue for current & Previous Year

Hi all,
We have a requirement to create a formula in crystal reports to display the current month revenue and previous month revenue along with few dimensions and also current fiscal year revenue and previous year.
For ex on SAp ecc table CE11000.
Please provide the syntax for above requirement.
Quick response is appreciated.
Thanks.
DJ

HI AlunJD,
Thanks for your quick turnaround.
Here's the structure of table i have fields like Currency type,Document Number,Fiscal year , Company code,country, Countrygrp,Document type, Sales quantity & Revenue.
My requirement is to display Revenue for current Fiscal Year and Previous Fiscal year and aswell as Current Month And previous month in the same report.
Is there any functions to create a formula to display data on above mentioned logic.
Thanks.
DJ.

Current fiscal year and previous fiscal year restriction in Query Customer

Hi ,
My requirment is disply current year qtrs and previous year qtrs in the report . User will not enter year , date , month or qtr . system should calucualte and disply curremt year qtrs and previous year qtrs .
I have created ZFISCYEAR reference of a 0FISYEAR year . now I would like to write customer exit for Current fiscal year and previous fiscal year to display current year qtrs and previous year qtrs.
Could you please provide customer exit code if you have or recomend if you know any other options.
Appriciate you help
Thanks

hi try this
take into account that I don't know th periv you use could be K4 or one defined by you so I have commented it.
The coding here is for the current fiscal period for the previous year just to another l_year varibale and populate with offset for instance l_year = l_year - 1.
so for current year
WHEN 'CURRPERIOD'.
    current_date = sy-datum.
    CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
      EXPORTING
        i_date = current_date
    '    i_periv = ''
      IMPORTING
     '   e_buper = l_period.
        e_gjahr = l_year.
    l_s_range-low = l_year.
    l_s_range-sign = 'I'.
    l_s_range-opt = 'EQ'.
    APPEND l_s_range TO e_t_range.
for previous period
WHEN 'PREVPERIOD'.
    current_date = sy-datum.
    CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
      EXPORTING
        i_date = current_date
    '    i_periv = ''
      IMPORTING
     '   e_buper = l_period.
        e_gjahr = l_year.
    l_year = l_year - 1.
    l_s_range-low = l_year.
    l_s_range-sign = 'I'.
    l_s_range-opt = 'EQ'.
    APPEND l_s_range TO e_t_range.
bye
Boujema

Current fiscal year period in BEx

Hi,
I have a requirment. i have a BEx query, that query is a source of APD and data is store in direct DSO.
i need to run this query every month and load current fiscal yer period data into the DSO.
i need BEx variable to filter the data for current fiscal year period.
I have fiscal year period char. in query definaton
Please help me to get this.
Thanks.
Edited by: Pria Gupta on Nov 24, 2011 2:18 AM

Use variable 0F_CUFPE Current Period of Fiscal Year (Formula Variable)
Re: how to get default value fiscal year period in Variable
Regards,
Sushant

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

HT4818 What is the best Partition size for a windows 7 Home Premium. I'm trying to install Windows using Boot camp

What is the best Partition size for a windows 7 Home Premium. I'm trying to install Windows using Boot camp

Go into your system preferences and click the startup disk icon then select your Mac HD.

What is the best file converter for Panasonic HC-X900M camcorder for use on Final Cut Pro X?

What is the best file converter for Panasonic HC-X900M Camcorder Mts files for use with Final Cut Pro?

This camcorder records in several ways, including AVCHD2, mpeg4 iframe, and 3d, at least that seems to be the case from a quick reading of its specs.
If you get the latest update for fcpx, it will handle video shot in 60P. That is 10.0.4
Here is what Apple says it supports, and one version of the 900 seems to be supported.
I think the Apple site is a little behind its own software update, as one advantage of the new update is that it handles 60P.
Maybe I am missing something, but I wonder what would happen if you get the latest update for fcpx, and try your card again. I did find that fcpx now supports my sony dslr at 60P.
Here is a thread with one person saying they can now use their 900.
Hugh

What is the best security package for an imac using yosimity

What is the best security package for an imac using Yosimity

Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to take control of it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has taken far too long to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. Those lapses don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, not machine behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software. A genuine alert that Flash is outdated and blocked is shown on this support page. Follow the instructions on the support page in that case. Otherwise, assume that the alert is fake and someone is trying to scam you into installing malware. If you see such alerts on more than one website, ask for instructions.
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a padlock icon in the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It can be as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

What is the best video converter for DVD to iMovie? Either free or to purchase.

What is the best video converter for DVD to iMovie? Either free or to purchase. And one that is 'fool-proof' and very easy to use. Many thanks, anyone who can advise.

You want to 'reverse engineer' the compressed mpeg2 DVD file back to something iMovie can use?
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

What is the best way to captue current date and time?

I got a field in table to capute current date and time...i am
using SQL Server.
field name datatype length
enter_datetime datetime 8
What is the best way to get current date and time and insert
to table?.
Is this way?.
<cfset curtime = 'dateformat(#now()#,'mm/dd/yyyy')&"
"&timeformat(#now()#,'hh:mm:ss')'>
This way looks like time is not entered correctly.
or any other better way?.

> get current date and time and insert to table?
You can use cfqueryparam
<cfqueryparam value="#now()#"
cfsqltype="cf_sql_timestamp">
Or as was suggested, set the default for your table column to
getdate(). Then you won't have to insert anything. Sql server will
do it automatically when a new record is created.

What's the best protective shield for my 3GS?

Hi Everyone,
Sorry to bother, but I just got a new iPhone 3GS and I'm wondering what's the best protector to put on the phone. I understand the 3GS has a new type of "coating" on the screen so I don't want to do any damage to it. I also heard the 3GS has these proximity sensors so I don't want to get a case that will interfere with that. Anyhow, I wanted to get an Invisible Shield, a full body one, but wanted to make sure I don't do damage to the phone. I've read the forums and it seems there is no definitive answer on whether or not the Invisible Shield is the best one. Any iPhone experts know what's the best protective shield for the 3GS? And will the Invisible Shield do any damage to the screen or coating on the new 3GS? I talked to a person at Apple and they didn't think it would do any damage, but to be honest, she didn't sound as knowledgeable as I would like. I'm sorry for being paranoid. Can you guys chime in?
Thanks!

The reason for no definite answer is that it matters what YOU are looking for in a case or protective screen cover...
To answer your shield question...the shield product itself will not damage the phone and that coating is not to prevent scratches...it's to help prevent fingerprints...since you plan to put a screen cover on then that coating doesn't really matter...HOWEVER, the way that the shield can harm the phone is IF it's not properly installed by YOU...since the design of that product calls for a liquid solution agent to be used to adhere the cover to the case of the phone, others have gone overboard with that liquid and then ended up with water damaged phones due to the faulty install...If you install properly then it's not an issue
Personally I used a full shield cover on a previous phone and hated it...so again it's all up to your taste...
What I currently have now is the simple Apple sold Anti-Glare screen cover you can buy two to a pack for 15.00 at Apple store...I have used since first Gen iPhone and loved it...
I have a Case-Mate leather hard plastic case but am not thrilled with it since the edges are raised around the edges of the screen and sometimes prevent me from hitting a button right up against the screen edge...so I don't use it much...
Other covers made by Case-Mate like the Barely There cover don't have that problem...so you really need to shop around and see what case you like and what you dislike...
Cases specifically sold to be compatible with 3GS will not interfere with either the proximity or any other sensor on the phone face...

What is the best design pattern for top-down ws development..?

Hi,
What is the best design pattern for top-down development+ wsdl2service....?

elrathia wrote:
Hi Ben,
I haven't much idea of how override works and when you would use it and why. I'm the newest of the new here.
Good. At least you will not be smaking with a OPPer dOOPer hammer if I make some gramatical mistake.
You may want to look at this thread in the BreakPoint where i trie to help Cory get a handle on Dynamic Dispatching with an example of two classes that inherit from a common parent and invoke Over-ride VIs to do the same thing but with wildly varying results.
The example uses a Class of "Numeric" and a sibling class "Text" and the both implement an Add method.
It is dirt simple and Cory did a decent job of explaining it.
It just be the motivation you are looking for.
have fun!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

What varaible is best to use for current fiscal year.

Similar Messages

Maybe you are looking for