What version do I have, and I get a hiss using it w/car stereo...

I just bought a 30G iPod- is this a 5th generation? It doesn't call itself that.
Also, my old car stereo wasn't iPod adaptable so I just bought a new Blaupunkt. I'm really happy w/it but when I use the iPod there's a fairly loud hiss. I hook the iPod up through the Aux In cable from the back of the head unit with a dock connector, and in order to hear the music at a normal volume I have to turn the stereo volume up very high; about 75% of the max volume. I also have to have the iPod volume up all the way or nearly so. This is resulting in a hiss.
Has anyone experienced this problem? Any solutions? The stereo otherwise seems to work fine; could I need an amplifier in the Aux In line?
30Gb i"    
30Gb iPod   Mac OS X (10.4.6)  

Mine works perfectly, but I took it into Car Toys to have the installation done professionally. I know they had to add a filter.
Other than that, yaye - Tunes in the car.

Similar Messages

  • I have version 3.6.23 on a desktip PC. When I "check for updates", I get a message that there are no updates available. What version should I have and how do I get it?

    I tried to use a shmetsy.com tool for Etsy. I couldn't use it because of my version of Firefox - 3.6.23
    I went to "About Mozilla Firefox" to check for updates and got the message "There are no updates available"

    I don't know what versions of Firefox work with Shmetsy. Do they have a system requirements page? It's not in the very short FAQ...
    You have the latest in the 3.6 line.
    If you want Firefox 7, go to http://www.mozilla.org/firefox to get the installer.
    Normally, major upgrades go without a hitch, but just in case, I recommend backing up your Firefox settings to cover yourself in the rare case that something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)

  • I have been given a mac os x version 10.4.11 and cannot get a flash layer update to download what ca

    I have been given a mac os x version 10.4.11 and cannot get a flash layer update to download what can i do ? please help!

    Is this a Power PC based mac?  If so, please see this FAQ:
    What version of Flash Player should I use with my Power PC based Mac?

  • I can no longer import pictures to my ibook (OSX version 10.6.8) using iphoto 09 version 8.1.2 and now get message that file is in an unrecognizable format.  What is wrong?  Same camera as before.

    I can no longer import pictures to my ibook (OSX version 10.6.8) using iphoto 09 version 8.1.2 and now get message that file is in an unrecognizable format.  What is wrong?  Same camera as before.

    Julesvernet
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • What versions of WinXP have MSJVM these days ???

    What versions of WinXP have MSJVM these days ???
    Where do I get the best info on this ????
    I'm looking for good reasons for my applet to not support MSJVM (use 1.1.4 jdk).
    I'm tired of MS JIT bugs.

    Sure. There are 2 components to compiler compatibility - the byte code emitted by the compiler, and the libraries the compiler uses. Sometimes just reverting the bytecode will achieve compatibility, sometimes not. Depends on the details of the changes that created the dissonance.
    The other component affecting compatibility is the runtime and its supporting data.
    For maximum compatibility, you want to use the compiler, jvm, and libraries with the least differences from the (in this case) MS jvm - and if that isn't stating the obvious, I don't know what is :)

  • I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. Wha.

    I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. What the heck... I did fine with the old iPhoto and "Shop elements 6... .

    Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
    LN

  • What versions of Xerces-J and Xalan-J does JDK 1.5 make use of

    Can any one tell me what versions of Xerces-J and Xalan-J does JDK 1.5 make use of.

    Hi all,
    I have a class which has a Vector<Vector> data
    member.
    I expect its collection to contain more collections
    hence the Vector<Vector> type.Everything is OK with your concept, except that you just declared a variable of type "Vector of Vectors". Instead, you need to declare it as "Vector of Vector of Objects":
    private Vector<Vector<Object>> coll;and initialize it with
    coll= new Vector<Vector<Object>>();

  • How can I tell what version ipad I have

    How can I tell what version ipad I have it's a 32GB  WiFi / Cellular and version number begins with MD52

    Check iPad model with the Serial Number
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • How can I see what version IOS I have on IMac

    I'm new to Apple I have an IMAC and not sure where to see what version IOS I have.

    1. Choose About this Mac from the Apple menu.
    2. Macs run Mac OS X, not iOS.
    (124425)

  • I have 5s and is getting heat while using it and durin charging

    I have 5s 7.0.4 (64G) and is getting heat while using it and durin charging

    thanks dear friend,
    but from Apple - Batteries - Notebooks:
    Apple does not recommend leaving your portable plugged in all the time !!!
    it's opposite of what you saying !

  • How do I know what version Itouch I have?

    Hello,
    I think maybe I've downloaded the incorrect software for my three year old itouch and in need of assistance.safari wont boot nor will any apps ive purchased from itunes.

    Look directly on the back of your iPod Touch for one of these numbers.
    iPod Touch 1st generation - A1213
    iPod Touch 2nd generation - A1288
    iPod Touch 3rd generation - A1318
    iPod Touch 4th generation - A1367
    Let us know what generation model you have and what iOS version you are running

  • How do I know what version number I have.  I have looked...

    How do I know what version number I have.  I have looked at the place it says where it should be and it only says WRT54G and no version number after it.  Can I assume it is version 1.0?

    Yes. It should be 1.0. You can also check wikipedia. They list all versions including the serial number prefixes.

  • I dont have and cant get the apple id password for my phone

    i dont have and cant get the apple id password for my phone

    till whenever i want my iphone give it back to me
    i was in Condong Catur Yogyakarta,
    my phone number +6287738546695
    i will block the imei if no progress in 1 week

  • HT1212 my ipad got disable bcoz of entering wrong password for several time and i got the above method but what if i dont have the same computer which i used to sync my ipad

    my ipad got disable bcoz of entering wrong password for several time and i got the above method but what if i dont have the same computer which i used to sync my ipad

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • What exactly is InheritableThreadLocal Storage, and how exactly do I use it

    What exactly is InheritableThreadLocal Storage, and how exactly do I use it?

    What exactly is InheritableThreadLocal Storage, andI have only seen one previous use of ThreadLocal objects and it was somewhere on http://www.javaworld.com on a solution to the Java double-checked locking problem.
    Roughly speaking, previously to Java1.2 you had two variable-type choices in Java. The first is a static variable that is the same across ALL instances of a class. The second was an instance variable, that is can be different in EVERY instance of a class. Java 1.2 introduced the ThreadLocal variable-type. If a variable type is ThreadLocal, then every running Thread may see a different value for the variable - essentially it is a Map of Threads to values.
    InheritableThreadLocal is finely different from ThreadLocal. They are almost identical excepting that if one Thread is spawned from another (ie. it is a "child" thread) then the value of the InheritableThreadLocal variable will be the same in the child Thread as the parent Thread.
    As to when it could be used, I'm not so sure (other than the no-brainer "when you want a variable to have different values in different Threads"). I'd be interested to hear about any instances where someone has used a variable such as this.
    how exactly do I use it?Carefully

Maybe you are looking for