What version works on Windows 7 64bit?

What version works on Windows 7 64bit? I have 6, 7, 8.1 and do not know if I need to upgrade some or all.

What product are you referring to?
Mylenium

Similar Messages

What version work with windows 2000

I just updated firefox and it prompted me to update flashplayer, but when I got to that scrren, windows 2000 was not listed -- WHat version could I use?

Hi, I know it's not listed but others are using it for 2000. Pat one of the helpers on here has used it. I would try it.
The Forum has technical issues and can't search right now for that thread. I just remember he responded to someone with the concern you raised.
eidnolb

Qosmio G40: TV Tuner not working in Windows 7 64bit

Hi,
After months of patience and following the drivers-info on the Toshiba website,i found it was time to replaced my Vista32 Ultimate with Windows7 Ultimate. It seemed that all drivers now have a 64bit version working under Windows 7, the missing drivers/software could be replace with the Vista 64bit versions. Unfortunately i got some problems with the TOSHIBA PCI DVB-T/Analog TV Hybrid Tuner.
Just searched a couple of ours for a sollution to the TOSHIBA PCI DVB-T/Analog TV Hybrid Tuner (x64) problem with Windows 7. In hardware manager it shows an yellow triangle with an exclamation mark, telling me that there is a problem with the device. Via properties i get an error with code(39).
I have downloaded the drivers from the Toshiba website which returns the following files:
tisdbt1a64.cab
TISDBT1A64.inf
TISDBT1A64.sys
and an additional 'setISDBTDriverParameters'-regkey.
1) When i try to replace the drivers by via the properties in devicemanager, i get a message back that the best drivers are already installed and there is no better driver found.
2) Install manually
There are no instructions to install the downloaded files, nor the regkey. When i try to install the 'inf' file with rightclick, i get a installationerror the the selected inf-file does not suppoert this installationmethod.
3) When i try to use 'install old hardware', the system ends in blue screen when driver is selected and installed. After booting the system again falls into blue screen. So i had to remove the device using 'save mode'.
4) I also tried to install Vista 64bit, same behaviour as (3)
5) I tried both TV-Tuner 2_1_11-ISDB-T and TV-Tuner-2_1_1_0. However, imho the former should be used.
Finally i reinstalled the complete system (from scratch) but same problem occurs.
Any suggestions? I found different threads about only tips are given. Almost no one describes a working sollution.
I have not found any sollution

I have read indicated thread over the weekend. This thread also points to other threads which should have info about correctly installing the drivers. Unfortunately, all these threads points to eachother without really telling how to do a correct installation. Some users seems to be able to use the Vista drivers or the G50 drivers but many others don't. It's strange though, all G40 systems should have the same hardware, no? And after installation of Windows7 they are all equal, no?
I haven't installed the G50 driver because
- there is no indication about the type of TV Tuner. I have a TV-Tuner-ISDB-T and it seems that the indicated driver is for the 'TV-Tuner' only (without IDSB-T opton).
- These drivers are dated 2009 whereas the drivers for G40 are from april 2010.
(although they have a creation date of march 2007 ???)
- Other users reports same probs with G50 drivers
I tried the G40 32bit, G40 64bit (Vista and Windows7) but none of them work. With the Vista drivers I got nothing but blue screens which finally forced me to reinstall Windows7 from scratch. I don't want to go to the process of reinstalling Windows7 from scratch again...
So, the G40 drivers are published by Toshiba in april 2010. I may trust that these drivers are the ones to be used on my machine? If not, why should i trust all other drivers?
I have noticed that there was an update installed for both TV- and Fingerprint hardware immediatly after installing Windows7. So after installation of W7 and reboot of the system i was notified that there were some updates which includes an update for both hardware components. I installed all drivers and software from Toshiba website AFTER this update installations. This resulted in a problem with both TV- and Fingerprint hardware.
In my second attemt to install Windows 7, i tried to block the automatic updates immediatly after installing Windows7. Don't know if it was succesfull because installation started immediatly and i had to 'cancel' the installation. After this 'cancel', i wasn't sure if something was already installed. Nevertheless, at that point (with no other updates installed), i installed all drivers and software from Toshiba website (with no reboot in-between). After this installation i rebooted my G40 and all but TV-hardware worked (including the Fingerprint Reader). Then i tried to update the TV-drivers without any luck, untill this moring...
This morning I was notified that there were updates to be installed. When i checked out which updates, an update for the TV-hardware seemed to be included. I decided to install this update and guess what... problem is gone!
So here is the list of my 'scucessfull driver installation' with my wireless internet connection active.
(Maybe it's a beter idea to make sure the laptop is not connected to the internet!)
Initial installation:
1) Install Windows7 from scratch
2) After initial installation, switch-off auto-updates for windows
If procedure to install updates is started (otherwise go to 4)
3) cancell automatic update install, be sure that update TV drivers/Fingerprint Reader are NOT INSTALLED
(eventually go back to recovery point)
4) Reboot
Install all available Toshiba drivers and software
5) Install all Win7 64bit drivers/software (skip TV drivers)
6) Install all Win7 32bit drivers/software
7) Install all Vista 64bit drivers/software
8) Install all Vista 32bit drivers/software
9) Reboot
Install TV drivers
10) Install regkey 'SetISDBTDriverParameters'
(= i changed the regkey from tisdbt1a to tisdbt1a64)
11) update 'TV-Tuner-ISDB-T' driver using 'Hardware Manager'
12) Reboot
Windows update installations
13) Execute windows updates
14) Reboot
Repeat 13/14 until TV-driver update is included in the list
It appears that problems are caused by a windows driver update which is installed for both TV- and Fingerprint Reader hardware immediatly after initial installation of WIndows7. I have no time (use my laptop for work too) to re-test above with installation of Windows7 without a connection to the internet. IMHO this should also avoid installation of the autmatic updates immediatly after initial installation. So, if anyone is trying to follow my steps to do a clean installation of Windows7 on a G40 laptop, please do not connect to the internet when initial installation is in progress. Attach to the interne to perform updates after step 12 and let us know the results.

Witch reader work in windows 7 64bit to read .PDF Files?

Need to make sure Reader for PDF File Reading will work in windows 7 64bit application.

11.0.3 works fine on Windows 7.

Windows 7 - what version works with CS4

I currently have a laptop with Vista home basic - I upgraded to CS4 last year and it doesn't work with home basic.
Anyone have an idea what versions of windows 7 will work with CS4 before I order it?
I haven't been able to use my software for almost a year .

yes but I refused to spend anymore money on an OS I hated from day one.
I use these at work all day long - but it will be nice to have them at home again.
I never had a problem before with the basic OS not working with a program - and if so , a patch was usually made
I bought my laptop a year before CS4 came out - I didn't want all the bells and whistles that Vista had - hence why I went with home basic.
Another way to suck money out of people
Thanks for the info - I think I will go with the profesional upgrade

What iTunes version works with Windows 8.1

What version of iTunes will work with Windows 8.1

The current one. You may find it works better if you disable IPv6 in your network settings.
tt2

What version works best with Windows ME? I have V. 2.

I occasionally get a message about a stuck script. It's a lot better than the constant java errors from Explorer 5.5, but I'd prefer not being interrupted at all.

The last version that worked on Windows ME was Firefox 2.0.0.20
This article may help with your problem - https://support.mozilla.com/kb/Warning+Unresponsive+script

ICloud wont work on Windows Vista 64bit

Hey there,
Ive been using iCloud with my iPhone 4, iPad and my MacBook Pro since it came out and it all works perfect.
Now I wanted it to run on my Windows Vista 64bit Desktop PC, to sync with Safari, Outlook etc.
My problem is: Everytime I start iCloud and confirm my username and password, iCloud is just shutting down saying "iCloud is no longer working" (in German: iCloud funktioniert nicht mehr)
I reinstalled it severall times and its always the same error...MobileMe has the same error by the way...Ive searched so long on the web and in other forums but no one had a clue...Hopefully you can help me!
Thanks,
p0ly

Hmmm. No, not exactly, but close enough (for me). Sorrry, in my rush I klutz'd the response. First I had MicroSoft do a clean install of 64 bit Offfice on my 64 bit Vista, then I uninstalled MobileMe, and iCloud, then reinstalled iCloud in that order. Oh...and by the way ... this was on 2 of my Vista machines. My virgin Win 7 machine had no issues at all with 32 bit.
The salient point I (regretably) missed in my first reply was to clean up the all references to Outlook in the registry. The tech tought the problem was related to keys for a (long ago) trial version of Office; Tho that was speculation on his part.
One thing is clear: The Apple tech said MobileMe has been replaced by iCloud and to remove it!
In the process, I learned that each (4) MS tech's stated, "Outlook has no issues, the problem is with Apple." I had to force them to do a clean install ... after failing with 2 techs I took a harder stance - happy I did. One told me they are under pressure to keep their calls under 15 minutes. Uninstall/cleanup/reinstall took ~2 hours.
Appologies p0ly,
tom

ISight just doesn't work on Windows 7 64Bits

I'm a new MacBook Pro user for a few days. I was attracted by the design of MacBook and knew I could install Windows on it, so after shopping for some time, I decided to get MBP 13". I got Windows 7 64Bits installed yesterdat; all the drivers are installed as well. I went to Control Panel\System, and I saw "Built-in iSight" listed. However, the camera device just doesn't work. In Control Panel, I didn't see the "Imaging and Scanning" icon. I tried to uninstall and reinstall the driver and no luck. I'm already using the latest Boot Camp, and I just don't know what to do now. I really need the camera working. Can someone help?

Does this help? http://discussions.apple.com/message.jspa?messageID=11953256#11953256
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Broadcom 802.11n Network Adapter not working on Windows 7 64bit

As the title suggests, my laptop (Alienware m17x) is installed with the Broadcom 802.11n Network Adapter and Windows 7 64bit Home Premium. I have had several other driver incompatibility issues with Windows 7, but those I have slowly been able to resolve. This however just cropped up after two months of successful use. Yesterday it started failing to connect to the internet, telling me that no wireless connections are available. I live in a dorm, and everyone else on my floor has successful wireless, including my Ipod Touch, PS3 and XBox 360. I called Alienware/Dell Support and we spent hours trying to fix the problem and all look well until I rebooted my laptop this morning and the same issue reappeared. When I reboot my laptop, all I get is a notification that no networks appear in range. If I uninstall the broadcom chip and let windows install it after a boot up it works until the machine is rebooted a second time. I have tried over a dozen windows 7 drivers for the chip, and about half a dozen vista drivers and they all have the same results, works on the first boot, fails every time after that

Just registered to say, on an Alienware M17x system as well running Windows 7 Ultimate, here is a link to a solution that worked exactly for me:
http://forum.notebookreview.com/alienware/436486-guide-properly-solve-wireless-connection-problems-m17x.html
All I did was section I.a. If the link is down, I copied the only section that I needed to follow out of this guide, in order to get my wireless to work repeatedly without having to uninstall the wireless driver every single reboot. Now it works perfectly,
already connected to a wireless network on startup.
I.a. Disable Device sleep on disconnect
Some newer Nvidia Ethernet drivers have a feature called Device sleep on disconnect. This is the culprit. Normally, it should only put the Ethernet adapter to sleep when the cable is disconnected, but it's buggy and thus kills the wireless connection as
well.
Follow these steps to disable this feature on your Nvidia Ethernet Adapter:
1. Open the Windows Device Manager by hitting Win+Pause, then click on Device Manager on the left side.
2. Double-click on Network adapters.
3. Double-click on NVIDIA nForce Networking Controller (yes, that's the wired Ethernet adapter indeed).
4. Click on the Advanced tab.
5. Select Device sleep on disconnect.
6. Set the Value to Disabled.
7. Click OK and wireless should work again (might require a reboot afterwards, but probably not).

Flash CS4 not working with Windows 7 64bit and Kaspersky Internet Security

I have a new i5 core computer running Windows 7 64bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 becomes so unresponsive that it is completely unusable. Uninstall KIS and it works absolutely fine. I've already read on another forum that someone else is experiencing the same issue with the same combination of products. Is anyone else having this problem amd if so how did you solve it? I've posted on the Kaspersky forum with no solution thus far.
Does Norton work OK with Windows 7(64) and CS4?

*** PROBLEM SOLVED ***
Taxxem you are a star. Ideed turning off 'disable external service control' and disabling 'self defense' under 'settings -options' does indeed bring Flash back to life. Disabling self-defense had the most impact (and causes Kaspersky to grumble somewhat) but disabling external service control also had an impact, albeit much smaller. I'll post this solution against my Kaspersky forum post and hopefully they will do something about it.

Which photoshop version works with windows 8?

I have tried cs2 and it does not work. Does anyone know which is the most economical photoshop version works well with windows 8?

Photoshop Elements 12 for outright purchase.
Or Photoshop CC 2014 with the $9.99/month PS+LR Photography Plan

11.1.4 and 11.1.5 not working in windows 7 64bit

I updated to 11.1.4 and experienced the same problems as many others- uninstalling and re installing eradicated the error messages but the store never opened and my phone would not sync.
I've up graded to 11.1.5 and now it is freezing, crashing- including the laptop and the problems with the store and phone remain- my phone shows an error message saying it is unsupported- is this because it is a standard 4?
Any ideas?
SisterM

When do you see that error message, when you update or launch iTunes? And does QuickTime launch normally.
What versions of iTunes and QuickTime Player are installed on your computer? We'll want to get iTunes updated to 11.1.5, and Quicktime Player updated to 7.7.5.
This Apple doc also has info that can help -> iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues

Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
Can anyone help me?
thank you

Hi Largo09,
Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

What version works with Mac 10.6.6 ?

I'm working on a new Intel Mac with OS 10.6.6. I downloaded Adobe Reader 10.0.1, thinking that that would install the whole program. Wrong. It asked me what version of an existing Adobe Reader program I wanted to update. But I don't have any version of Reader on this computer. What do I need to do now?
Thanks.

Hi,
Adobe Reader 10.0.1 works with OS X 10.6.6.
You have probably downloaded the update package rather than the full reader installer. Request you to download and install Reader from: http://get.adobe.com/reader
Or you can also use direct download ftp link for english version:
ftp://ftp.adobe.com/pub/adobe/reader/mac/10.x/10.0.1/en_US/AdbeRdr1001 _en_US.dmg
Thanks,
Karan

What version works on Windows 7 64bit?

Similar Messages

Maybe you are looking for