What versions of Call Manager support the new VG3XX Voice Gateways?

http://www.cisco.com/c/en/us/td/docs/routers/access/vg350/software/configuration/guide/vg350_scg/scgapp_platforms_ORIG.html#64565

Similar Messages

Call Manager register fxs port with voice gateway- problem

I have a CUCM 6 and a Voice Gateway V224. I've configured the voice gateway's voice FXS ports as MGCP.
I have a Voip connected and registered to the CUCM and a Pots phone connected to the Voice Gateway.
If i dial from the Voip to the Pots phone it rings. The problem is that i cannot ring from the Pots to the Voip phone.
I have no dial tone.
If i write no shut down on the voice port i have a tone. If i configure mgcp on the voice port i have a busy ringtone.
I've entered no mgcp and mgcp commands and i've reset the voice gateway.
How can i call from the pots to the voip phone?
The ios version on the voice gateway is Version 12.4(22)T4.
Here is an outghtput from the Voice gateway.
ccm-manager mgcp
ccm-manager fax protocol cisco
ccm-manager music-on-hold
ccm-manager config server 10.1.1.33
ccm-manager config
mgcp
mgcp call-agent CCMIOSS 2427 service-type mgcp version 0.1
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp validate domain-name
mgcp rtp payload-type g726r16 static
mgcp profile default
timeout tone busy 600
timeout tone dial 600
dial-peer voice 999223 pots
service mgcpapp
port 2/23
dial-peer voice 999222 pots
service mgcpapp
port 2/22
dial-peer voice 999888 pots
service mgcpapp
port 2/23
The CUCM 6 is registered with the voice gateway.

Is your campaign using CPA? If so, what's the behavior if CPA is not enabled?
I think the best thing to do is to run a trace...
Call Manager > Cisco Unified Serviceability > Trace > Configurations
Select a CUCM server - any subscriber would work.
Service Group - CM Services
Cisco CallManager (Inactive)
Enable SIP Stack Trace and apply to all nodes. Download and install RTMT
Make a bunch of outbound tests and then open RTMT > Trace & Log Central > Collect Files > Check "All Servers" for Cisco CallManager > Next > Next > Relative Range if you made the test calls within the last X minutes, otherwise you can set a From and To datetime. Click Finish and go through your SDL logs and see what errors you find and post them here.
Also, make sure your phone is in the correct CSS in Call Manager

I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer. The issue is my system does not support the newer version. Does anyone know how I can get around this?

I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer. The issue is my system does not support the newer version. Does anyone know how I can get around this?

Apple wanted to charge me 50 bucks jsut to talk to someone!
I believe you may be referring to the $49 ASL agreement at AppleCare? That is only when/if you are out of AppleCare Protection.
Can you get to an AppleStore Genius Bar?
They may be able to fix this for you. No charge.
I highly doubt that. There is a $70 charge for troubleshooing software issues, EVEN IF there is AppleCare Warranty on the hardware.
However, since there is no charge for an appointment at a Bar, go make one, and see what options they give you. Let us know how it goes.

Have Photoshop Elements from 2001. Got new computer with Windows 7 Professional 64 bit. It won't run on my new computer. What version is MOST SIMILAR to the old version I have, that will run on W7P-64? Thanks for any help. Popjer

Have Photoshop Elements from 2001. Got new computer with Windows 7 Professional 64 bit. It won't run on my new computer. What version is MOST SIMILAR to the old version I have, that will run on W7P-64? Thanks for any help. Popjer

You should probably just download the trial version of pse 12 and see if you can live with it.
Download a free trial or buy Adobe products | Adobe downloads
That being said, have you tried to install pse 1 on your computer?
How much free space is on your hard drive?
Do you have Internet Explorer 10 or 11?
Pse 1 can run on windows 7 x64, provided certain conditions are met.

HT4009 IX have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

Update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

My mac OS doesn't support the new version of Firefox, so I don't have it at all now--how do I get back to the older version?

my mac OS doesn't support the new version of Firefox, so I don't have it at all now--how do I get back to the older version?

All firefox releases:
ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/
check this too:
http://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox
thank you

What versions of iOS are supported by the latest Flash Builder 4.5.1?

Hi, I can't seem to find what versions of iOS are supported by the current version of Flash Builder 4.5.1?
I'm having trouble with StageWebView with iOS 4.2.1 on the iPad 1.
thanks,

Hi, I can't seem to find what versions of iOS are supported by the current version of Flash Builder 4.5.1?
I'm having trouble with StageWebView with iOS 4.2.1 on the iPad 1.
thanks,

What is the recommended Delay/Latency between Call manager and The SRST setup

Hi ,
Need to understand the readability between the CUCM and SRST.
What is the recommended Delay/Latency, Bandwidh between Call manager and The SRST gateway setup.
Regards,
Velu S

Hi Manish,
I've been struggling to get this information and what I could understand from the SRND is that this 80ms is just related to the Intra-Cluster communications (Between Servers UCS), there is no relation with SRST Gateways:
"The maximum one-way delay between any two Unified CM servers should not exceed 40 ms, or 80 ms round-trip time."
From that I assume that the RTD between the SRST and the Cluster should be based on the affirmation below:
"If a voice service is hosted across a WAN where the one-way latency is 200 ms, for example, users might experience issues such as delay-to-dialtone or increased media cut-through delays. For other services such as presence, there might be no problem with a 200 ms latency."

Hello! I bought lightroom yesterday but got lightroom 4 not lightroom 5 as i thought i would. What can i do to get the new version?

Hello! I bought lightroom yesterday but got lightroom 4 not lightroom 5 as i thought i would. What can i do to get the new version?

Contact the seller.
If you decide to keep your purchased Lightroom 4, you will also have to purchase the Upgrade to go from 4 to 5.x

What version of Desktop Manager should I be using?

I have the Sprint 8330 and Vista with Outlook2007, what version of Desktop Manager should I be using?

molarchs wrote:
Could it be that my Outlook is from Microsoft Office 2000?
Yes, exactly, which is why I asked several posts back... what version of Outlook are you using". We ask questions for good reasons.
You will need DM version 4.2 Service Pack for Outlook 2000.
OR, upgrade the Outlook to 2003 or better and use DM 4.7
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What will happen if I pull the new pages out of my applic folder and try to use the 09 pages?

I'm tired of fighting the new (less functional) Pages. I created a 16 page newsletter in the 09Pages version but when I opened it today it had been transferred into the newer version and It had lost a bunch of data I had designed into it. I had gotten instruction from an Apple support person on how to tell it to open in the old version so I quit the new version and opened the old one but it's not working according to her directive. It keeps telling me I have to download a newer version to open it. What would happen if I pull the new version out of the applications folder .... will that disable it temporarily and allow me to use only the old version?

Using Get Info to change all documents to open with Pages 4.3 doesn't work. It will work on individual files, but that could be a lot of files to reset.
If you want to keep Pages 5 there are a couple of methods to make Pages 4.3 the default. Just make sure you've reverted or converted any files to iWork '09 format first. If you don't want to keep Pages 5 you can delete it.
Method 1:
This was first posted by another user in this forum. I can't remember who or when. It has been "fine-tuned" by Peter Breis & I added a note for what works for me.
1. Move any new iWork apps in another clearly labelled folder. I created a new folder in Applications & named it iWork 13.
2. Menu > Apple > System Preferences > Spotlight > Privacy > drag the above folder into the list
3. Move the new iWork folder into the trash (temporarily)
4. Select any Pages file in Finder > Menu > Info (cmd+i) > Open with: > Pages '09 > Change all
5. Retrieve the new iWork folder from the trash (right-click > Put back)
Pages 5 should no longer appear as a default App, and you won't have to keep a copy in a separate drive or dmg.
Important: Make a note of where and how Pages was installed for the next App Store update and temporarily move it back there before putting it away again in the folder concealed from Spotlight.
Method 2:
This is the one I used based on several posts here shortly after Pages 5 was released. I now use method 1 because I find it easier to apply updates when Apple releases them.
1. After I installed the new iWork updates I created a folder on an external drive & named it "other applications."
2. I then moved the new iWork apps to this folder & renamed the applications Keynote 6, Pages 5 & Numbers 3.
I have icons for two versions of Pages & Numbers (I rarely use Keynote) in my Dock. Even with two versions of Pages & Numbers running, double-clicking an existing file opens in Pages 4.3 or Numbers 2.3. This should also keep the Mac App Store from nagging you to update.

I accidentally deleted Garageband on my MacBook Pro, version 10.6.8. The new version of Garageband is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD for my computer

I accidentally deleted GarageBand on my MacBook Pro, version 10.6.8. The new version of GarageBand is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?

The new version of GarageBand is only compatible with 10.9 and above.
If your Mac can run MacOS X 10.6.8, it probably can be upgraded to Yosemite, if you don't have to stick to Snowleopard for other reasons.
Is it possible to still get the older version?
Amazon or eBay are still selling iLife '11 installer disks, and you could reinstall GarageBand from these DVDs. But it will be expensive.
Have you checked your backups, if you can restore GarageBand from a backup?
OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
Sometimes the AppleStore Support will replace missing installer CDs for a fee.

I have a new computer and I want to make it my home device for I tunes. I have home sharing, and all of the music and files are on the new computer. Now what do I do to make the new computer the home computer for Itunes?

I have a new computer and I want to make it my home device for I tunes. I have home sharing, and all of the music and files are on the new computer. Now what do I do to make the new computer the home computer for Itunes?

The computer (windows platform) where I initially began using Itunes has four other computers/devices that are shared with it. All four of the other computers show up in my account, and can be managed. Or I can remove them. But on the new computer that I want to be my base computer (home if you will). The computer I want it to replace, when ITunes is open, has a tool bar, with various functions. All of the other devices are linked to that computer in ITunes, under Home SHaring. The new computer, shows the downloads via Home Sharing, but it does not show/have any tool bar.
I want to activate the new computer to be the computer via ITunes where all of the devices are linked to it as the base for ITunes. And, I don't know how to make that happen.
I hope that makes sense.

I upgraded to Mavericks. I just spent an hour in Pages. Now I can't open my documents, it says I need to upgrade to a newer version. It looks like the new 5.0 when I typed but it's saying I'm running 4.3. the App store says I've already upgraded. Hel

I upgraded to Mavericks. I just spent an hour in Pages. Now I can't open my documents, it says I need to upgrade to a newer version. It looks like the new 5.0 when I typed but it's saying I'm running 4.3. the App store says I've already upgraded. HelP

Actually, there seems to be a bit of a bug. Encountered this with a couple of files my wife made. The files were set to "open with" the new Keynote, but clicking the file brought up this error. Right-clicking and selecting "open with..." worked correctly. I can only assume the OS was attempting to open the file with Keynote '09 despite the file property setting.
Probably requires a Launch Services DB reset (although I haven't actually tried it on my wife's MBA yet...since she's still "working on stuff". So I can't confirm if it will solve the problem).
/System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.fram ework/Support/lsregister -kill -r -domain local -domain system -domain user ; killall Dock

What version of SQL Server support ssl connection with TLS. 1.2 (SHA-256 HASH)

Hi,
I just want to know,
What version of SQL Server support ssl connection with TLS. 1.2 (SHA-256 HASH).
if support already,
how can i setting.
plz. help me!!!

The following blog states that SQL Server "leverages the SChannel layer (the SSL/TLS layer provided
by Windows) for facilitating encryption. Furthermore, SQL Server will completely rely upon SChannel to determine the best encryption cipher suite to use." meaning that the version of SQL Server you are running has no bearing on which
encryption method is used to encrypt connections between SQL Server and clients.
http://blogs.msdn.com/b/sql_protocols/archive/2007/06/30/ssl-cipher-suites-used-with-sql-server.aspx
So the question then becomes which versions of Windows Server support TLS 1.2. The following article indicates that Windows Server 2008 R2 and beyond support TLS 1.2.
http://blogs.msdn.com/b/kaushal/archive/2011/10/02/support-for-ssl-tls-protocols-on-windows.aspx
So if you are running SQL Server on Windows Server 2008 R2 or later you should be able to enable TLS 1.2 and install a TLS 1.2 certificate. By following the instructions in the following article you should then be able to enable TLS 1.2 encryption
for connections between SQL Server and your clients:
http://support.microsoft.com/kb/316898
I hope that helps.

What versions of Call Manager support the new VG3XX Voice Gateways?

Similar Messages

Maybe you are looking for