What versions of the SAP Enterprise Portal support Java 5

What versions of the SAP Enterprise Portal support Java 5? 
Example:
If we were to use Java 5 code for an iView what versions of the portal would it run in?
I have reviewed the Product Availability Matrix (PAM) and this is not clear. All I can find are references to JAVA 4 when using EP 6.

Hi Alejandro,
Currently, the version of SAP NetWeaver that is J2SE 5.0 as well as Java EE 5 compatible is the [SAP NetWeaver Composition Environment (NW CE)|https://www.sdn.sap.com/irj/sdn/nw-ce]. It does not provide the "full" Portal capabilities, however it does come with a "Portal Lite" and supports Portal applications development scenarios.
For more information:
[Introduction to NW CE|http://help.sap.com/saphelp_nwce10/helpdata/en/45/ff9fc1d8986c06e10000000a1553f6/frameset.htm]
[Developing Applications for the Portal|http://help.sap.com/saphelp_nwce10/helpdata/en/44/d4269651103ee1e10000000a114a6b/frameset.htm]
HTH!
-- Vladimir

Similar Messages

  • What are all the o/ss that support java?

    I have been coding and testing java apps under windows NT. I have been asked to provide information of all the o/s that support java, to enable platform independence. So for eg, if I were to run my java application on Hp or Sun, do I need different runtimes of java, or is there a common java runtime for all flavors of unix. Also, is the ide for linux different from other unix versions. Basically I need a complete list of vendor, o/s and java runtime version that will run on the same. Where can I get this list.
    Thanks,
    Durga

    this link may help u
    http://java.sun.com/products/plugin/1.3/docs/quick_start.html
    -Mala

  • Future Version of the SAP Enterprise SOA Discovery System

    Hi,
    what happens, if a new version of the system is available. I understood, that the system can be patched and new components can be installed. Do I have to buy a new box or can I make an update?
    Would it be possible to add a image of the complete system to the distribution, so the system can easily be reset after something went wrong?

    Hi,
    it's currently a bit early to talk about future versions of the Discovery System. Nothing is finally decided yet.
    The applications on the Discovery System can be patched and upgraded as any other SAP software installation. And you are free to add software to the system.
    Shipping an image is a nice idea. I am not aware if HP is not shipping that already.
    Best Regards,
       rAimund

  • CUA with the SAP Enterprise Portal

    Hi,
    We have existing CUA on a system with SAP_BASIS     700.
    This CUA do have various R/3 systems connected.
    Now we are going for EP with SRM/MDM.
    We have an ABAP system as backend system with SAP NetWeaver 2004s (SAP_BASIS     700, PI_BASIS     2005_1_700)
    My question is, can I connect EP system to my existing CUA?
    If yes, how to do this?
    Regards,
    DA

    Hi Deepak,
    I guess this document will help you.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a30ba7e3-0601-0010-80af-93f4c5a9b9f0
    Regards
    Rakesh

  • Integration of SAP enterprise portal with ATG dynamo platform

    This is more an architectural question.
    There is an existing web application running on the ATG 5.x/6.x B2C platform that takes orders from dealers for a retailer. It integrates with a SAP system using proprietary integration mechanisms. This is the existing architecture.
    There is a idea to use the SAP netweaver platform, specifically the SAP enterprise portal that will integrate with the ATG dynamo platform.
    ATG 6.2 and above allows integration in 2 ways :
    1) Use web services
    2) Integration framework using JMS/RPC etc
    [Pl. see the ATG documentation www.atg.com/support]
    I have been reading thru number of articles on SAP netweaver and looking for multiple options for the above integration.
    My theoretical understanding is:
    a) Develop a connector to the ATG platform using connector framework and invoke a web service on the ATG platform that expose the business logic built on the ATG platform
    b) Does SAP XI come into picture if the portal tries to create a business process out of one single application.
    c) Are there any other options?
    I'm completely new to the SAP netweaver platform but have a good idea on SOA.
    Any help or inputs on this will be highly appreciated.

    Hello,
    I can give you a suggestion from the Connector framework point of view. We are currently developing a generic webservice connector which will enable to create content using CF, which will be sent as WS requests for function execution. The connector is planned to be released for New-York 7.1 Netweaver branch. For the mean time I can suggest, as you did, to develop your CF connector which will connect to ATG exposed WS.
    Best Regards,
    Ran

  • SAP Enterprise Portal - Post Installation Tasks

    Hello everyone,
    I am a beginner in the area of SAP Enterprise Portal. Please bear with me in case if I ask you stupid questions.
    "Our idea is to deploy the BIW 3.5 IVIEW over the portal"
    I have installed the SAP Enterprise Portal 6.0 SP6 on Windows 2000 server environment. I have followed the install guide and I have done the installation successfully. I am also able to logon to the portal server using the irl url http://sodium:5000/irj/portal as an Administrator.
    As a BASIS administrator point of view, what are the next Post Installation activities that I need to perform?
    (Our idea is to deploy the BIW 3.5 Iview over the portal)
    I really appreciate your responses.
    Thanks & regards,
    Nikee

    Hello Nikee,
    Simply define the SAP BW system, add an Alias, import portal certificate (for SSO), and start creating functional iview that can render your BW queries and reports.
    Create a System pointing to the BW server with the following details:
    a) System ID
    b) Client
    c) Web Access Point with "WAS" as category containing the following
    entries: -
    · Protocol
    · Hostname
    Note: Domain name of WAS should be same as portal domain
    After that create BW iviews
    QueryString is in the form "CMD=LDOC&infocube=myCube&query=myQuery"
    You should have WAS on the BW server and also IGS shall also be present.
    To follow with the latest, see note #489961 and
    http://help.sap.com/saphelp_nw04/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
    Hope this will help.
    Regards,
    AAAttar

  • Business Object, SAP BW and SAP Enterprise Portal

    Hello all,
    I've a few questions about the possibility for linking Business Object, SAP BW and the SAP Enterprise Portal.
    The Business Package MSS 1.41 give us a functionality to display (in a federated portal) personalized Budget and costs in an Overview Iview (kind of Welcome page).
    Those information are retrieved from SAP BW and I'd like to know if it's possible to retrieve those data (with the same functionality) from Business Object tool.
    Is it possible to have those personalized reports without having a direct link (standard architecture) between SAP BW and the federated portal?
    Thank you in advance fro your answers.
    Matthieu

    Hi,
    The procedure to replicate BW users in BO is explained in detail on the blog of Ingo Hilgefort:
    /people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
    Regards,
    Dave

  • SAP Enterprise Portal Strategy Documentation

    Hi,
    I would like to get a template document to design the SAP Enterprise portal strategy. Is there a document which lists the areas to be considered while designing the Enterprise portal strategy? Are there any best practices which SAP suggests in this area ?
    Regards,
    Amit

    Hi.
    You may find the following links useful for you:
    [Planning and Succeeding with Your SAP NetWeaver Portal Project|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/903122e0-b3d4-2b10-c5b3-c19f5dd58072]
    [Best Practices - Portal|http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/e0b46f8a-8fce-2b10-95a5-b72dd53a952b]
    Best regards,
    Aliaksandr

  • Q: BOBJ reports in SAP Enterprise Portal?

    Hi,
    We want to be able to access Business Objects reports (Crystal Reports and WebIntelligence Reports) via the SAP Enterprise Portal. The integration between SAP BI and BOBJ is completed, and we can create WebI and CR reports based on our SAP queries, but we have not been able to understand how to publish the reports in the portal.
    Does anybody have any idea of how to publish these reports (for instance if it is possible to create a direct link to the report in InfoView)?
    Any help appreciated,
    Thank you in advance,
    Mikael

    Hi Mikael,
    this is the quick (URL iView) but not the recommended (BOBJ iView Template) way:
    1. Log on the BOBJ InfoView, locate your report and look at its properties. Write down its CUID.
    2. Go into the SAP Portal and create a new URL iView using following URL
    http://<name of bobj web server:port of boboj web server>/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=<CUID of your report>
    Regards,
    Stratos
    NOTE: The openDocument URL works for BOBJ XI 3.x installations with Tomcat. Please look in the documentation about the syntax if you are using IIS.

  • Two sap enterprise portal in the same server

    Hi,
    We have installed a SAP Enterprise Portal on a linux server, all ok!!. but now we want to install another SAP Portal in the same server with the same ehp and same sp, but diferent url, is it possible? and we have something in mind when we began to install it..
    e.g. diferents ports or diferents database SID to avoid errors.
    thankssss

    Hi Carlos,
    SAP Software in general is flexible regarding this requirement.
    A SAP ID identifies the system, and the Instance ID is related to the Portnumbers that are used...
    So lets say you have an:
    - host called "linuxhost1" and
       - you installed a SAP system "AB1" and
          - the CI is 00 and SCS is 01
    then you can install multiple additional installations for example
    - host called "linuxhost1" and
       - you installed a SAP system "AB2" and
          - the CI is 02 and SCS is 03
    etc etc..
    As long as your host has enough resources you can fill it up...
    The instance numbers you chose are reflected in the portnumbers. So in my example above  the AB1 portal is called by http://linuxhost1:50000 and AB2 portal is called by http://linuxhost1:50200...
    So in other words the instance number of the CI is used in the portnumber of the java instance (5NN00).
    The above info is also spread among different SAP installation guides, and SAP help pages.
    Cheers,
    B

  • What is the last version of the Apple OS that supports Eudora and Quake III? (I'm at 10.4.11)

    Hi There,
    I am having vertical line issues with my G4 PowerMac Quicksilver (April 2002)..  Red or purple lines and sometimes they connect to the pointer arrow.
    I thought it was the graphics card but when I ran the Apple Hardware Test Disk version   1.2.5 it failed at the Logic board, although it's an after market Logic board because one of my (2) 1 gig processors died a few years back so I don't know if the hardware test disk is still valid with an after market Logic board?
      Also What is the last version of the Apple OS that supports Eudora 6.2.4  and Quake III? (I'm at 10.4.11)
    Thanks for any and all help, I think my time is limited in my old Mac..
    Eric

    Hi-
    I'd strongly recommend replacing the thermal compound on the Radeon 9800 Pro. It could very easily be a simple matter of lack of cooling which is causing your issue.
    I have a tutorial here:
    C874D84E-96DD-4DFF-9566-7C66BE065BB5.html
    16196A0F-952B-47ED-A9F9-91F7B0ECA431.html
    Use Arctic cooling MX-4 compound.
    As for drivers or ROM updates, if the card is a flashed one, don't bother with the firmware. All ROMs are the latest firmware.
    In Tiger, there is a retail driver update that you can try:
    http://support.amd.com/us/gpudownload/Pages/jan2005updater.aspx
    No updates needed for Leopard.
    Eudora should be fine:
    http://lowendmac.com/misc/10mr/mb0910.html#1
    Quake is fine. This coincides with my observations:
    http://www.insidemacgames.com/forum/index.php?showtopic=31884

  • Changing the text "SAP Enterprise Portal 6.0" in the browser window title

    Hi,
    I want to change the standard browser window title from "SAP Enterprise Portal 6.0" to my clients company name.
    Has anyone done this before?
    Please help.
    Thanks in advance
    Padmamr

    Hi,
    To change the name of the browser:
    System Administration > System Configuration > Service Configuration > Portal Runtime > Central Configuration.
    Scroll down to: portal.html.head.title
    and change to required name of your company.
    Also, if you goto System Administration > System Configuration > UM Configuration > Direct Editing.
    Here you will find a host of UME controls for logging on and logging off the Portal. You can change images etc... from here.
    Remember to restart the Portal and components for changes to take affect.
    Cheers

  • The latest SAP Enterprise Portal to download?

    Hello everyone,
    I would like to know where you can download the latest SAP Enterprise Portal, please let me download the address? Thanks！

    These two paths can not be downloaded,
    ftp://ftp.sap.com/pub/sdn/devkits/netweaver/java/NW04SneakPrevJavaSP11.part1.rar
    ftp://ftp.sap.com/pub/sdn/devkits/netweaver/java/NW04SneakPrevJavaSP11.part2.rar
    Please help me!

  • J2EE/SAP Enterprise Portal - Developer Position

    Our client is looking for Enterprise Application Developer with strong J2EE and SAP Portal knowledge.
    Please submit your resume to [email protected] for an immediate consideration.
    ENTERPRISE APPLIC. DEVELOPER
    Description:
    EDUCATION: B.Sc. Computer Science or equivalent Required Technologies: - Strong J2SE and J2EE experience - APIs knowledge - JSP, Java Serlvet, JMS, EJB (Session and CMP 2.x), JDBC, JNDI, JCA, J2EE Deployment, JAX-RPC, SOAP 1.2 - Web UI development framework such as Struts or SAP WebDynpro - Source Code Version control system such as CVS - Java Ant - Java Security and J2EE Security - Eclipse - LDAP JOB DUITES: - Develop plan and implement SAP EP into a large IT environment. This will include providing the technical expertise required to make this happen in a timely manner. - Work with internal clients to translate the defined business requirements into technical solutions, do feasibility assessments and identify the appropriate technical approach to meet those needs. - Technical architecture and design, and hands-on development of Portal solutions which are based on SAP best practices and J2EE standards. - Execute the software development life cycle, develop and carry out development best practices, and participate stress test and performance test. - Support and enhance existing applications.
    EXPERIENCE: - Competency in the development of customized software and architecture processes - Java Application Server development, delivery and overall system optimization - Solid experience of software development life cycle (requirements, specifications, design & analysis, construction, testing, deployment). - Proven ability to meet deadlines - Demonstrate the ability to prioritize tasks and work effectively with minimal supervision in a collaborative environment -Must be details-oriented and have a strong commitment to client satisfaction - Strong analytical skills and ability to create innovative solutions to complex problems -Strong communication skills Required Experience: -Object Oriented analysis and design -Solid Java application development experience -Solid Web tier development experience -Solid XML and Web Services experience -Web application security such as Single Sign On architecture -Web application profiling -Experience design and document enterprise applications - Solid troubleshooting skills - Experience with source control system -Web application and enterprise application integration - Knowledge and/or exposure in SOA architecture - Relational database experience, knowledge of repository framework -Commercial Portal product experience is a bonus Desired Experience/Technologies: - Hands on experience in SAP Enterprise Portal 6 - Knowledge of SAP HR, R3, BW - Knowledge of ABAP - Hands on experience in webMethods product suite.

    hi aditya,
    u can also refer to this links to feel comfortable with portal.
    New to EP..
    Very new to EP with Little knowledge on JAVA....Help on this
    http://help.sap.com/saphelp_nw04s/helpdata/en/10/4baa42cdccda11e10000000a155106/frameset.htm
    Beginning EP Development
    Oliver's favorite SDN link collection
    Top Weblogs of All Time [19 to 14]
    Installing and configuring the preview edition of EP
    What is EP ??
    About portal
    e-Books on EP
    Beginner to EP
    Start with EP
    Portal Development
    regards
    bhargava
    note:reward points if useful

  • Pre-requisties of sap enterprise portal knowledge

    Hi All,
               i have got basic training on sap enterprise portal(admin part) and i got chance in one of the support project as sap Ep consultant .
    actually i dont have any real time exposure in Enterprise portal ...in coming days my KT(knolwedge transfer) will be start ...pls share me the kt template related to sap enterpise portal ...what are the things do i need to ask on that kt?   and what are things do i expect from that KT?.........................please help me out ...

    So if you have NWBC, I understand from this discussion, that you do not need the SAP Portal.  If that is the case,
    (1) how can users working from home or from anywhere else have access to NWBC?  Is it as easy as accessing a website? or do they have to first go through the company's firewall.
    (2) If they can access it directly, do home users need special software on their PC e.g. SAP Gui etc??
    (3) What would be the main reason why a company may not want to use NWBC but use the Portal.
    Thanks
    Pascal

Maybe you are looking for

  • Query on Applicant Actions

    We are implementing both Recruitment & PA modules for the customer. In the Recruitment module, the customer wishes to enter the applicant data into the system only after the initial shortlisting. What are the typical infotypes that are included in th

  • Positions assigned to Org Units

    Dear Consultants, There are some designations / Positions (like Clerk / Assistant etc) common in more than one departments. How can we assign it in System?? When we assign any designation to the second department, the first assignment is delimited au

  • ITunes has encounter an error an must shut down

    This keeps happening after installing the updates and to top that off my screen gets funkie looking... the lines are all off and sometimes it doubles itself? Any resolutions out there? Thank you all !!!!

  • Copying domain folder

    Just curious....is it possible to copy a domain folder to another machine with a base WLS install (no domain) and have it work in a Windows environment? I assume things like a nodemanager service would have to be installed for the registry need (if n

  • Same Procedure in multiple attached libraires

    Dear All, I have multiple attached libraries in my form. Same procedure contain in multiple attached libraries. Then which library procedure will fire. What is the sequenc of firing.