What video source files does Flash Video Encoder CS3 support?

I can't find this anywhere on the web. I successfully converted an AVI to FLV, but the quality wasn't very good, but that is because the AVI isn't very good. So I ripped it again with higher quality into an m4v format. It took over an hour for a 12 minute video only to say this error at the end:
The operation could not be completed because an error occurred.
Is there a list somewhere of the source video files supported?
thanks a lot,
Justin

decibleXL wrote:
> Give him the best source material I can - exactly,
that's what I thought! I
> want to give him a TGA sequence that I create either
straight out of my 3D
> animation software or out of Premiere, but he always
tells me it's too big. He
> says it either crashes Flash, or the file size of the
FLV he creates using the
> TGAs is too big. The basic gist I'm getting from my
Flash guy is that the file
> size of the end product (the FLV) is directly effected
by the file size of the
> source material. I think that's why he's trying to get
me to give him stuff
> that's really small and compressed. The problem is that
in order to get it as
> small as he wants it, the quality takes a major hit.
There are options while converting to FLV to define the
quality, size etc...
This is where you impact on the final output. TGA might be
too large, try AVI or
MOV, tho again, the FLV converter is the one responsible for
the quality and size
of the final file.
> So I've got a TGA sequence that's 1.8GB. He told me that
was way too big for
> him to use.
It's too big :) Flash will die upon import of such file.
> So I processed the sequence using QuickTime pro into a
JPG sequence
> for him. The JPG sequence is 50MB. He tells me this is
STILL too big for him to
> use. Then he asks me for an AVI encoded with XVID. I
don't really feel like
> this is the right way to go, adding compression on top
of compression like
> that. But at the same time I don't know much about
Flash, so I'm not really
> inclined to argue with him.
>
> What do you guys think?
Try Mov or Avi
Btw. 50Mb it's not so big. If properly compressed, could be
very good quality and reasonable
size.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

  • Recording video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http.

    As titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?
    What I am trying to do, is to record a user's microphone's input and save it to the server. Afterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
    How can I redirect the http request to the files I was recorded into my applications/appName folder? Or I need to somehow moved the recorded files to the /webroot folder?
    Thanks!

    I probably have asked a stupid question.
    My recorded streams are still saved in the applications/appName/streams folder.
    And I redirect the www.mydomain.com/streams to point to the applications/appName/streams folder.
    And the rmtp recorded streams are abled to connect through http now.

  • Firefox keeps halting when what seems to be a Flash video runs.

    Firefox keeps halting when what seems to be a Flash video runs.

    P.S. "scoobidiver" in the contributors forum just posted the following:
    Since Firefox 9, all issues with slow Flash content or hangs in the French support forum have been caused by the Ask toolbar although users have uninstalled it with the Windows Removing Program feature. Sometimes, they don't even know it was installed.
    <snip>
    '''EDIT:''' If the Ask Toolbar is installed, try these removal instructions, which link to a ToolbarUtilityTool.exe removal tool: <br>
    http://asksupport.custhelp.com/app/answers/detail/a_id/2908<br>
    How do I uninstall the Ask.<!---->com Toolbar?

  • "Source file does not conform to XML Schema!" error at Import Server

    Dear SDN,
    When I run Import Server the import job stopped with the error "Source file does not conform to XML Schema!" in Log file. I used MDM SP05 Patch01 and HF1.
    Both of 2 Import Server have same problems. Of course it works in Import Manager.
    What do I have to check?
    Regards,
    Eric

    Hi Eric
    Just confirm this...
    One needs to load XML schema file in MDM and can be done by specifying this file in Port .
    Refer this link.
    http://help.sap.com/saphelp_mdm550/helpdata/en/fa/69b20ae0ae4b158a3f6d025b3d3847/content.htm
    Just make sure that corresponding XSD file is specified in the port
    Regards

  • When I published my video to youtube, does the video also exist anywhere locally on my Mac?

    When I published my video to youtube, does the video also exist anywhere locally on my Mac?
    Thanks for answering..

    Hi MyAppleID99,
    You may want to check to make sure the clip hasn't been moved back and forth between wide screen and standard aspect ratios; sometimes a combination of letterboxing and pillarboxing can lead to a black frame "windowbox" when playing the final video. You may find the following article helpful:
    Apple Support: What are Letterboxing, Pillarboxing and Windowboxing?
    http://support.apple.com/kb/ht2320
    Regards,
    - Brenden

  • "Source File does not match XML Schema"

    Using MDM 5.5 SP4 Patch 2 (Build 5.5.34.26) on a 32-bit system (WinServer 2003, Enterprise Edition SP1.
    This source file and schema have been verified by SAP Tech Support and again using Altova XML Spy. The schema was loaded into MDM through the console and the source file was successfully mapped against it and the data manually imported into MDM. The customer record was then cleansed using the Data Manager and the import map was used to create an inbound port. However, when the Import Server goes to import the file using the map, the following error is dropped into the log: "Source File does not match XML Schema". Has anyone else seen this error?
    Thanks,  Don
    IMPORT LOG ENTRY:
    <?xml version="1.0" encoding="utf-8"?>
    <?xml-stylesheet type="text/xsl" href="MDM_Log.xsl"?>
    <MDM_Log version="1.0" path="H:PROGRA~1SAPMDM~1.5IMPORT~1TempMDIS_TASK@@U@[email protected]"
    >
         <Open ts-long="18:24:35 GMT, Saturday, February 03, 2007" ts="2007/02/03 18:24:35.108 GMT" pid="8640" host="bp1tulap452" compile-type="RELEASE_32">
              <Trace ts="2007/02/03 18:24:35.249 GMT" tid="7216" entry-no="3">[BP US FUELS CUSTOMER MASTER] Import Task Started. Chunk size[50000], No. parallel chunks[1]</Trace>
              <Trace ts="2007/02/03 18:24:43.890 GMT" tid="5980" entry-no="11">xSaxParser: Starting.</Trace>
              <Trace ts="2007/02/03 18:24:43.937 GMT" tid="5980" entry-no="19">xSaxParser: Ending.</Trace>
              <Trace ts="2007/02/03 18:24:43.937 GMT" tid="5980" entry-no="20">Source file does not conform to XML Schema!<LINE-FEED/></Trace>
              <Trace ts="2007/02/03 18:24:45.312 GMT" tid="7216" entry-no="29">[RESPOSITORY]Import Task Finished. Chunk size[50000], No. parallel chunks[1]</Trace>
         </Open>
    </MDM_Log>
    SOURCE FILE:
      <?xml version="1.0" encoding="UTF-8" ?>
    - <ns1:CustomerCreateResp xmlns:ns1="urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100">
    - <CUSTOMER>
    - <item>
      <CUSTOMERNO>0090154474</CUSTOMERNO>
      <MDMCUSTOMER>2463</MDMCUSTOMER>
      <CREATE_DATE>22/01/2007,11:43:49</CREATE_DATE>
    - <RETURN>
      <TYPE />
      <MESSAGE />
      </RETURN>
    - <PT_CONTPART_RETURN>
    - <item>
      <MDM_CONTACT>0000000001</MDM_CONTACT>
      <CONTACT>0001111119</CONTACT>
      </item>
    - <item>
      <MDM_CONTACT>0000000004</MDM_CONTACT>
      <CONTACT>0002222229</CONTACT>
      </item>
      </PT_CONTPART_RETURN>
    - <PARTNERS>
    - <item>
      <CUSTOMERNO>0090154474</CUSTOMERNO>
      <PARTNER_FUNCTION>RE</PARTNER_FUNCTION>
      <PARTNER_NUMBER>0001333329</PARTNER_NUMBER>
      <DEFAULT_PARTNER>X</DEFAULT_PARTNER>
      </item>
    - <item>
      <CUSTOMERNO>0090154474</CUSTOMERNO>
      <PARTNER_FUNCTION>WE</PARTNER_FUNCTION>
      <PARTNER_NUMBER>0001555559</PARTNER_NUMBER>
      <DEFAULT_PARTNER />
      </item>
      </PARTNERS>
      </item>
      </CUSTOMER>
      </ns1:CustomerCreateResp>
    SCHEMA:
       <?xml version="1.0" encoding="UTF-8" ?>
    - <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100" targetNamespace="urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100" elementFormDefault="unqualified">
      <xsd:element name="CustomerCreateResp" type="CustomerCreateResp" />
    - <xsd:complexType name="CustomerCreateResp">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">682cc2d0aa6e11db9b800015c5888624</xsd:appinfo>
      </xsd:annotation>
    - <xsd:sequence>
    - <xsd:element name="CUSTOMER">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">f68988f0a02e11db94bb00166f98336c</xsd:appinfo>
      </xsd:annotation>
    - <xsd:complexType>
    - <xsd:sequence>
    - <xsd:element name="item" maxOccurs="unbounded">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b20a75811dba9d400166f983d94</xsd:appinfo>
      </xsd:annotation>
    - <xsd:complexType>
    - <xsd:sequence>
    - <xsd:element name="CUSTOMERNO" type="xsd:string" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b21a75811db9c4800166f983d94</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="MDMCUSTOMER" type="xsd:string" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b22a75811dbcbac00166f983d94</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="CREATE_DATE" type="xsd:string" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b23a75811dbcc0300166f983d94</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="RETURN" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b24a75811db8d5500166f983d94</xsd:appinfo>
      </xsd:annotation>
    - <xsd:complexType>
    - <xsd:sequence>
    - <xsd:element name="TYPE" type="xsd:string" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b25a75811db876d00166f983d94</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="MESSAGE" type="xsd:string" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b26a75811db85c400166f983d94</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
    - <xsd:element name="PT_CONTPART_RETURN" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b27a75811db8ca900166f983d94</xsd:appinfo>
      </xsd:annotation>
    - <xsd:complexType>
    - <xsd:sequence>
    - <xsd:element name="item" minOccurs="0" maxOccurs="unbounded">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b28a75811dbaae100166f983d94</xsd:appinfo>
      </xsd:annotation>
    - <xsd:complexType>
    - <xsd:sequence>
    - <xsd:element name="MDM_CONTACT" type="xsd:string" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b29a75811dbaade00166f983d94</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="CONTACT" type="xsd:string" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2aa75811dbc24c00166f983d94</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
    - <xsd:element name="PARTNERS" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2ba75811dbb74500166f983d94</xsd:appinfo>
      </xsd:annotation>
    - <xsd:complexType>
    - <xsd:sequence>
    - <xsd:element name="item" minOccurs="0" maxOccurs="unbounded">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2ca75811db9f6500166f983d94</xsd:appinfo>
      </xsd:annotation>
    - <xsd:complexType>
    - <xsd:sequence>
    - <xsd:element name="CUSTOMERNO" type="xsd:string" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2da75811db9bd800166f983d94</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="PARTNER_FUNCTION" type="xsd:string" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2ea75811dbb84100166f983d94</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="PARTNER_NUMBER" type="xsd:string" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2fa75811db852800166f983d94</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="DEFAULT_PARTNER" type="xsd:string" minOccurs="0">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">72ea9b30a75811db968400166f983d94</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
      </xsd:sequence>
      </xsd:complexType>
      </xsd:schema>

    You have to define the namespace in the URI field of XML Schmea in Console.
    In MDM Console,
    Admin -> XML Schemas -> Create XML Schema
    You have to specify the namespace urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100 in the URI property.
    Please update this post if fixed your problem.

  • Can't Activate Flash Media Encoder CS3

    I just had a new hard drive installed on my Windows XP SP3, 4 GB RAM, 2 dual core Intel processors machine.  I reinstalled Production Premium CS3.  All of my Adobe applications activated except Flash Media Encoder CS3.  When I enter my serial number, it says it is an incorrect number and places a big red X beside of the number.  The number I entered is the number on the box.
    I called Technical Support and held for them for over 1 1/2 hours but no one came on to answer my question.  I entered the problem in the Support Portal but it has been over 24 hours and no one has contacted me.  I like Adobe software but not their technical support.
    Can anyone in the Forum help?
    Thanks,
    Linda

    I've tried it (with cookies cleared) on three different browsers now and they all experience the same problem. I am on OS X but that should not affect my ability to connect to a particular server. Here, for example, is a non-functional download link I'm given: http://download.macromedia.com/pub/flashmediaserver/flashmedialiveencoder/installer/AdobeF MLE3.2.1_r.dmg

  • Refresh video source files?

    Hi - I recently completed a large iMovie project after incorrectly fiddling with the source files. I now know how to properly prepare the source video and would love to just replace all of it, intact, in iMovie (preserving all my nice transitions, titles and cropping). Is this possible, or am I going to have to do it all over again?
    Thanks for your help!
    -Christian
    More info, not really pertinent:
    - my source files are Mumex MPG, which doesn't work in iMovie.
    - I found a tool (MPEG Streamclip) and converted them to DV
    - when I brought them into iMovie, they were scaled wrong, so I bought the cfx scaling plugin and stretched them back into the correct shape
    - at this point, everything still looked decent in iMovie, even during test mode.
    - however, when I output to MOV or to a DVD (via iDVD, it looks like crap, due to blending of the scaled interlace fields, which i now know about).
    - I have done a new test on a sample file, de-interlacing before iMovie, and it looks much better
    powerbook G4 Mac OS X (10.4.8)

    DLR wrote:
    I accidentally reformatted my external drive.. I am currently using Data Rescue II to attempt recover.
    < fingers crossed > ...
    In case the data recovery doesn't work, does anyone know if I will be able to reimport the video and have the project files recognize the new sources?
    I lately made a test, by dragging Events in Finder to a diff. location.. = project kaputt . dragged files back to original location = project fine.
    when you look inside a iM-Project file with the plist-Editor (part of the DevTools), you'll notice as item 62 a 'link', e.g. "~/Movies/iMovie Events.localized/HF100 Import/clip-2008-05-23 23;06;51 1.mov" .. which reads in Human English:
    my import is in the iM-Events folder, named 'HF100 Import', followed by the naming scheme, iM uses automatically..
    => in your case, if you re-import, you HAVE to use the exactly same Event names as before! .. in theory, your re-imports of video could work..
    How many Projects/Events are we talking about.. ?
    ... Please don't tell me I should have backed up. ..
    you should have backed-up ..

  • HELP! Reformatted drive with Video source files

    I accidentally reformatted my external drive that contained the source files for all of my iMovie '09 projects/library. I am currently using Data Rescue II to attempt recover. Fortunately (I hope), all of the project files are on my internal drive.
    In case the data recovery doesn't work, does anyone know if I will be able to reimport the video and have the project files recognize the new sources?
    Please don't tell me I should have backed up. In fact this was the very thing I was trying to do. I simply made the biggest bonehead mistake in reformatting the wrong drive. I am so bummed now. All of my family videos.
    I would greatly appreciate any assistance.

    DLR wrote:
    I accidentally reformatted my external drive.. I am currently using Data Rescue II to attempt recover.
    < fingers crossed > ...
    In case the data recovery doesn't work, does anyone know if I will be able to reimport the video and have the project files recognize the new sources?
    I lately made a test, by dragging Events in Finder to a diff. location.. = project kaputt . dragged files back to original location = project fine.
    when you look inside a iM-Project file with the plist-Editor (part of the DevTools), you'll notice as item 62 a 'link', e.g. "~/Movies/iMovie Events.localized/HF100 Import/clip-2008-05-23 23;06;51 1.mov" .. which reads in Human English:
    my import is in the iM-Events folder, named 'HF100 Import', followed by the naming scheme, iM uses automatically..
    => in your case, if you re-import, you HAVE to use the exactly same Event names as before! .. in theory, your re-imports of video could work..
    How many Projects/Events are we talking about.. ?
    ... Please don't tell me I should have backed up. ..
    you should have backed-up ..

  • Video player to Adobe Flash Media Encoder

    Hi i want stream same video with Adobe Flash Media Encoder what software i can use now im using manycam but quality is no good plz for help.

    You can increase the buffer to 5 seconds, click on the auto adjust and drop frames (recommended over degrade quality in my opinion as it can change the pitch of the audio), then change the buffer to 5 seconds.
    Googled this image:

  • What format converts best to Flash video?

    Hi folks!
    I'm trying to get the best Flash video I can. I can export from my editing program (Final Cut Express) in a number of formats, including QuickTime, mpeg4, and avi. Is there a preferred format such that the final conversion to Flash will be optimum? Any ideas? I realize I'll still have some trial and error, but I was wondering if anyone has any advice. I would appreciate your help immensely. Thanks very much!
    Vixter

    Generally, if you have the option to encode to H.264, that will be your best bet.  Modern version of the Flash Player (versions 9+) allow for H.264 video playback without any additional encoding.  If you don't have that option, then Quicktime would be your second-best bet, as it uses H.264 under the hood.

  • What controls width in streaming flash video?

    I need to access and stream flash video stored on a US server.  I do so from one of three PCs - all running Windows 7, all with same updates and same version of Flash.  Two of them show a given video fine.  The third runs the same video but it is clearly truncated on the right and bottom - that is, only part (top left two thirds?) of the video is visible.  And two show timecode and the third...doesn't (or its hidden by the truncation).  But how can this be???  And more importantly, what can I do to make the third PC play streaming video correctly?
    If this isn't posted in the best place please say so.
    Bemused and baffled.

    Check if the same issue is repeating with new flash player version 10.1.82.76.
    Thanks,
    Sudheendra

  • New Update: Does flash video work?

    Havent had a chance to download the new update but was wondering if it does anything to solve the flash video problem (being able to watch videos online that are in flash)?

    No flash support.
    Adobe is going to program a version after the SDK release in Feb.

  • Does Flash Media Encoder pass CC

    We will be streaming a live feed using Flash Media Encoder 2.5. The stream already includes Closed Captions - Does FME 2.5 pass the captions?

    as far as I know FMLE will not transfer anything besides audio/video to the client. if your closed captions are already in the videochannel (pre rendered) then it will work normal.

  • Unable to publish projects with inserted video - error message The Flash video can not be loaded

    I've created a project in Captivate 6 with two slides that have inserted videos in them
    Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
    They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
    I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
    Below are my settings and the error message
    Any suggestions would be greatly appreciated.

    Your screenshot indicates you are publishing to a folder on a network drive.
    Have you:
    Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
    Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

Maybe you are looking for

  • G3 Personality Cards...

    What's the diference between the 820-0923-A AV A/V Wings and the 820-0971-A AV A/V Personality Cards?

  • Best Compression method needed. Running out of space! ARRRRGH

    Well i've had an ipod for many years and over that time i've built up a good 20gb or music. I really want to increase it too as i've plenty of stuff yet to be converted. I Had an a 4th Gen Ipod (i think - known as click wheel) Now I had been hoping t

  • Ipod updater won't read my iPod...why?

    iPod updater won't read my iPod. Even when it's plugged in it still says plug in an iPod to update.

  • Regenerate enhancement for transaction ME21N

    hi there, In the transaction ME21N a user exit was implemented for purchase order screen to Tick a checkbox for a condition. It was for program : SAPLZ_FGAZETTE and screen 0100. It was working fine. Now a SAP patch is applied and user exit is not wor

  • Using opendocument for child report

    Hello Experts, One my webi report(parent) is likned with another wei report(child)using hyerlink and opendocument. Now my requirement is to hide refresh button of child whenever it would get opened (After clicking on hyperlink on parent) So every tim