What was required to fix the RSD?

Hi, I got my Macbook in August, and within a week of buying it, I had to send it in to get the RSD problem fixed.
It was listed that the logic board was replced.
Now, in October, it has started again, once yesterday, once today....grrr....
I was wondering if anyone knows what needs to be replaced to fix the RSD problem.
Thanks..

Mine was repaired recently. It had the heatsink only replaced (not the logic board). The service from APple , I must say was exceptionally excellent. I turned it in to my local store and had it back in under 24 hrs. The cost of the part was listed at under $15 and the labor at under $140.
The genius told me that "Apple had just decided that the heatsink , not the sink lobo combo was the problem"; I didn't see the part he replaced.
I DID ask him about the "melted wire" theory - he said he'd repaired several machines with RSD and had not seen th emelted wire........
good luck with your machine
Grant

Similar Messages

"VI has error of type 1002288.The full development version of LabVIEW is required to fix the errors"

Hi,
I had created an executable in LabVIEW 8.6 on a windows XP 32 bit PC. The application uses some Vision VIs. The executable runs in most of the PCs except one. the PC is a windows 7 64bit. Initially i got the error "Labview Load error code 3: could not load front panel". I fixed this by changing the source file settings in the application builder. Now i am getting the error "VI has error of type 1002288.The full development version of LabVIEW is required to fix the errors" and the exe shows a broken run button.
But if i build the exe in the same PC i get no errors and it works fine. Moreover i have tested this exe in a different PC with the same configuration, it works there. I have tried reinstalling labview in the PC the problem still persists.
Solved!
Go to Solution.

Hi Rajshekar.
> Which version of LabVIEW are you using on PC with Win7 64bit? would like to check if there are any issues with LV2009 32bit on 64bit OS..
- The version of Labview on the win7 64bit PC is also lv8.6 full development system.
> Do you get the same error on the other PC with same config(Win7) when running the .exe generated using LV 8.6 on WinXP 32bit? just to make sure the problem is with OS or LV..
- the same problem occured at one more PC with the same configuration. but when i tested in an another PC of the same config it worked i am not able to isolate and decide that the error is based on one particular PC config.
I have listed the environments in which application ran and how the application was put in to the PC.
I would also like you to know that i have created an installer for the exe. I am also using NI vision in my application and this is the error "An error occured loading VI 'IMAQ GetImagePixelPtr'. LabVIEW load error code 3: could not load front panel"....and rest is what i said in my previous post
1. Use the installer to install the application.
2. just copy the exe created in LV 8.6 into a PC that already has LV development system installed in it
3. The PCs might either be a blank one with no history of LV installed in them
4. The PCs might have diffrent versions of LV development systems installed in them (8.2,8.5,8.6,2009)
All PCs that have LV development system(s) installed in them, was able to run the application except the one with win7 64, where i have tried uninstalling all NI software and use only the installer to install, install LV 8.6 full development system and try runnning the exe, nothing works.
Thanks

A full development version of labview required to fix the errors.

When i tried to run my exe file, it gives following error.
"A subvi is not executeable.A full development version of labview required to fix the errors."
i do have full version of 6.02.
Am i missing something something when i built exe?
any Help will be appreciated.

Well, here we go again...
I have seen this error way too many times in my day.
The problem is you have a bad linkage, or unsaved or compiled VI in your hierarchy when you built the application.
Open your main, or otherwise open (into memory) ALL VIs in your hierarchy. Then, do a save all from the file menu. This should solve the issue.
The other reason I have seen this is if you have bad linkage. As there is no real way to tell what your linkage is, you need to go into the hierarchy, select View Full Path in Title and make sure everything is where you think it is. I have often seen this occur even when the application I was building from was in perfect condition. Often times, when the app builder is used, VIs will be called from locations you
don't expect.
You have to be VERY careful about developing in a hierarchy. I actually got to a point where I had to even place all the NI VIs into my directory structure.
Take a careful look at the hierarchy. Chances are the executable is calling the wrong code, or is compiling with the wrong version.
If in doubt, go to a fresh machine, and move all of your VIs (individually if you have to, or as a .llb preferably) to the new machine and build it from there. Alternatively, you can try doing a save as from your main and select "application distribution" this will resolve any issue with VI locations, except where Dynamic VIs are being used.
Good luck, 'cause you are going to need it.

I recieve the following error when running an executable ("This VI is not Executable. The full development version of Labview is required to fix the errors"

I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG ‏36 KB

other PNG
Attachments:
Broken Arrow on EXE.PNG ‏179 KB

HT5624 I would like to change ,my password. I signed in but I don't know what was my answer for the 2 security question. How can I change my password?

would like to change ,my password. I signed in but I don't know what was my answer for the 2 security question. How can I change my password?

Hello, dot mac & MobtleMe no longer exist, though it may be possible to still use a dot mac addy... or maybe not if expired.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
    •    Server name: imap.mail.me.com
    •    SSL Required: Yes
    •    Port: 993
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
SMTP (outgoing mail server) information:
    •    Server name: smtp.mail.me.com
    •    SSL Required: Yes
    •    Port: 587
    •    SMTP Authentication Required: Yes
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

HT4108 What is required to use the video composite out on the iPhone 4. Left and right audio works ok

What is required to use the video composite out on the iPhone 4 The left and right audio works ok

Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

In Material Master Screen,functionally what is Requirement Group in the MRP

In Material Master Screen,functionally what is Requirement Group in the MRP Screen.Pls explain its functionality

Hi,
The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
Prerequisites
·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
Regards,
Vijay

TA25335 How do I get my QuickTime download to enable my videos online. It was required to play the video, but the videos still aren't able to play.

How do I get my QuickTime download to enable my videos online. It was required to play the video, but the videos still aren't able to play.

It is also saying when I try to play videos from my computer that there is a I/O error. When I try to play movies from the hard drive it is saying 'This file is not a movie file."

How can I found out what was changed to fix a JDK bug?

For example I'd like to know what was changed to fix this bug: https://bugs.openjdk.java.net/browse/JDK-8064358

No idea. Impossible to speculate without more information.

What is involved in fixing the kernel task problem and what are the consequences

Ah yes. The kernel task problem. My Macbook pro encounters it at least once every day. It peaks at around 600% CPU usage when I have MainStage or Logic open. A main stage patch that normally uses 40-45% of CPU is redlining at 100% cpu usage- resulting in awful clicks and pops. Did i mention this happened during a live show yesterday? Because it did. I can open the CPU monitor and look at whats going on. It's always the same deal. Kernel task runs it's course and then goes back to normal.
I've seen various posts on fixing the problem. I believe I understand how to fix it more or less (ish). I just want to make sure I can go about it in such a way that doesn't mess with anything else on my computer.
My computer: macbook pro 8.2 15' w/ crucial m500 ssd in main & optical bays. 8gb of ram. latest version of mavericks. Standard stuff.

ssd in main & optical bays
Your unsupported hardware configuration is likely contributing to the problem, if not entirely causing it.

Why do I keep getting a runtime error in Reader9.1when the new version was supposed to fix the runtime error issue?

Trying to fill out forms in Reader and keep getting this:
Runtime Error Program C\programfiles\adobe\reader9.0\acrobat32.exe -pure virtual function call
It says reader 9.0, but I have installed and am running 9.1 and it says 9.1 in the "about" tab. I cannot get my work done.
This was not happening in the previous version of reader I had.
Please HELP!
Elizabeth

It might be a bug in the new version of Adobe Reader. http://support.microsoft.com/default.aspx?scid=kb;en-us;125749
Looking at my system, the path for AcroRd32.exe for Adobe Reader 9.1 is C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe. I don't know if you mistyped your path, but you do not have \Reader\ in it. If you mouse over the file AcroRd32.exe, it should show you version 9.1.
Did you uninstall the previous version before installing the latest version? That is the recommended way to do it. I filled out my Federal Tax forms with Adobe Reader 9.1 without a problem. This is on Windows XP SP3, fully updated.

What is happening about fixing the bug that prevents me from downloading the updated version of Muse CC 2014

I managed to upload to an external host server (Vidahost.com) but it only only showed an older unmodified version of my site. I used the FTP upload and selected ALL files then tried to upload modified files only. Here is what I received:
'This site was exported from an older version of Muse. Please update to Muse CC 2014 and then upload the site again in orer to use In-Browser Editing.
Some bug in the CC Manager is telling me Muse is updated and the latest Muse CC 2014 is on my machine - or is it a bug in Muse?
Help appreciated while I have a go at rebuilding the site in Dreamweaver.
Cheers
Bill Watters

Hi, Thank you for your help. Please note that I have upload and launched my site to Business Catalyst which was a seamlessly smooth operation. See http://bilyzcom.businesscatalyst.com
Using Programs & Features I uninstalled Muse and Muse 2014. Then I uninstalled and re-installed the Adobe Creative Cloud. I then restarted my computer before going to Adobe Creative Cloud and downloading Muse CC 2014. I opened my site at bilyz.com and attempted to upload to FTP. First I tried to upload ALL files but the upload kept stopping and saying it failed to upload but to click resume. Then I tried again but this time tried to upload modified files only but met with same result.
I observed that the upload seemed to be having problems and hanging at 62% before giving me the option to click resume. This stop / start progress continued for over half an hour until I abandoned the upload and returned to muse 'Design'. I then changed the name of each image file from, for example, from 'best%20help' to 'best_help'. After I had changed every image's name I tried to upload again only to notice that the external server was continuing to upload images with the old name.
I cannot be sure if I have the updated version of Muse as I cannot fully upload to the external server which would then give me access to the In-Browser Edit Process.
If you open http://bilyz.com and compare it with http://bilyzcom.businesscatalyst.com you will see the updated version that uploaded without any problems to business catalyst..

What's required to use the built-in LDAP authentication scheme

In order to use the built-in LDAP authentication scheme in my ApEx application, do I have to have anything more installed in my oracle environment or available to us than accessible LDAP addressing? Our environment is a 10.2 database instance (Enterprise Edition) with ApEx and Microsoft Active Directory that has LDAP setup. It looks like all the DBMS.LDAP packages are in place in my database.
I'm using something similar to the below for built-in prompts but all LDAP tests fail:
host=ourdc1.ourdc2.ourdc3.edu
Port=389
cn=%LDAP_USER%,OU=Users, OU=Department,DC=ourdc1,DC=ourdc2,DC=ourdc3,DC=edu

Hello,
What is your name?
I know this sounds funny but when I was starting with AD LDAP authentication I seem to remember the user name being the key. Instead of "username" I had to use "[email protected]".
Ultimately, I created a custom package built on DBMS_LDAP as the ApEx package is really targeted for OID.
Regards,
Dan

If I backed up an old iphone that broke, is there a way to restore that stuff without erasing the content that's already on my new phone? And if I were to back up the content on my new phone would that erase what was backed up from the old device?

Some quick and important questions about icloud that I can't find on the internet

It sounds like you restored the backup of your old phone to your new phone.
Unless you backed up the new phone first or manually copied the pictures off prior to restoring the backup, the pictures are gone.

TS3367 i have an ipod touch4 I can call out on facetime but no one can call me it doesn't ring . does anyone knowwhat would cause this and what Ican do to fix the problem?

please help!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
You posted in the iPad forum instead of the iPod forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

What was required to fix the RSD?

Similar Messages

Maybe you are looking for