What was the dev team thinking with Firefox v29?

So I was just auto-upgraded to firefox 29, and I need to know: What exactly was the dev team thinking when they designed it? Title bar disabled by default? Total removal of the add-on bar? Tabs forcibly on top? Seriously, stop trying to be chrome. Chrome is aesthetically and functionally terrible, why do you keep trying to emulate them? I can't speak for the community, but for myself and for people I know, one of the main reasons we use firefox is because we strongly dislike chromes layout. For the time being, I've downgraded to v28, and disabled auto-updates.

Let's take advantage of the fact that we have Developers around.
You are obviously unhappy with the development decisions, and that is normally off topic in this forum, but right now because of Firefox 29 Release we will have Developers around popping in to the forum. I will add an escalate tag. If we are lucky a Developer may give an explanation and a proper answer to your question.

Similar Messages

How to find what are the support-teams map with particular componant type

hi experts,
i am new in solution manager.. My requirement is when creating the support message in crmd_order t-code i have to give the componant type in transaction data after that in fast entry screen i have to assign support team for that componant type .. here i have to give only valid support team which are map with particular componant type .. when save the support message here i have to check that support team is map with that particular componant type (i.e that support team is belong to that componant type ) .. thats what i have to do in abap development .. so how to find the what are all the support teams mapped with particular componant type .. whether it is stored in any table or ?.. Please give solutions ..
Regards,
Kumar..

Hi Kumaresan-
I'm not sure I fully understand your requirement but I will try to help out. If you are trying to determine / associate the relevant support team according to which component they are responsible for, this might help.
The determination of the support team is maintained by configuring rule 13200137 in transaction PFAC_RESPO.
Click on the Responsibilities Tab
Create your responsibility based on your support team requirements
Assign the appropriate Support Team, this data will be taken from the settings you have maintained when creating your org chart in ppoma_crm
Highlight a responsibility and click Change
In this table you will see an entry for SAP Component, this is where you identify which support team will be determined based on component

I just downloaded Firefox 6.0. The web page asked if I wanted to upgrade. What is the most recent version of Firefox and why can't I get it denoted in the propperties link? Also why is it not compatible with AVG Tool Bar?

I just downloaded Firefox 6.0. The web page asked if I wanted to upgrade. What is the most recent version of Firefox and why can't I get it denoted in the propperties link? Also why is it not compatible with AVG Tool Bar?

Firefox 6.0 is the current version.
Get what denoted in what properties link.
You can get the version number in Help -> About Firefox,
and in '''about:support''' typed into the Location bar, and you can use JavaScript to list the user agent -- javascript:navigator.userAgent
I'm not aware of any version of Firefox from Fx 2 on up to Fx 6 where "AVG Safe" is not a problem. Crashes aren't the only failures caused.
* http://kb.mozillazine.org/Problematic_extensions
* https://addons.mozilla.org/en-US/firefox/blocked/
* https://addons.mozilla.org/en-US/firefox/blocked/i6
* https://bugzilla.mozilla.org/show_bug.cgi?id=527135

What was the stable JDeveloper and ADF to go with the project development?

Hi All,
what was the best and stable Jdeveloper&ADF to Project development?
Regards

Jdev 9.0.5!
You question can't be answered. For a decision we need to know what kind of project you mean. What kind of application you want to develop.
Sample: if you need mobile there is only one version (stable or not), you can use. For SOA it's different, as it is for WebCenter.
Please providde more infomation.
Timo

(BUG REPORT) Kudos to the Dev Team OS 2.0 Rocks Major Improvement

Kudos to the BB Playbook OS 2.0 Dev Team (Excellent Release!!)I want to give my personal thanks as a loyal blackberry customer to the Developer/ Coding Team over at RIM. I am thoroughly impressed with the update. I absolutely love the reader feature. The new home screen and folders is implemented wonderfully. Also, it appears battery life has been improved (No easy task). Great job.
There are a few little bugs to be fixed for the next maintanence update.
1. Flash is not polished, it's only partially working.
The daily show (with John Stewart) (www.thedailyshow.com)(full episodes link), and several other flash video webistes have trouble with the controls (play, pause). The controls either don't show, or don't function, or neither, or function sporadically. Also, possibly an app could be created so that a flash video stream would open in a separate window allowing the controls to function correctly if there is some reason it is difficult in the web browswer. I can get the daily show playing but, pausing it, or fastforwarding, now that's a challenge. Make the buttons larger maybe (I don't know if that's possible, not familiar with flash.)
2. Media Player: The media player has some bug in the code that is causing it to become choppy when scrolling through the list of songs. I have some album art, and maybe that has something to do with it. But I didn't notice it before the update.
Also, it may be a neat idea to add some different color backgrounds to the music player skin(Hot pink, or something) to take care of the lady geeks, women buy stuff too, think all girl dorm room full of playbooks. Also, it is kind of a less than sexy music player skin (Unlike the new home screen wow, very polished.) Also, because all my music doesn't have album art, it makes the music player look strange. Some of the icons have only 3 of 4 pictures filled in Looks weird.
Also, when fast forwarding with the slider bar clicking with my finger causes a slight pop in the earphones (It needs to mute, then fastforward, then unmute, then play.) Imagine a playbook hooked up at a wedding to a 5000 dollar soundsystem, pop, then bye bye speakers.
3. Book Reader Power Mode - I was using "Book Reader" app from the app store and I noticed something that could be fixed. The truth is that when people read ebooks, the power managment settings should be a little different. I suggest adding a 3rd power managment mode that the ebook reader apps can access. That way, every time I open an ebook it sets the screen to stop going dim every 30 seconds like I would use for messages and general use throughout the day. It should stay the same in this mode rather plugged in or not. The screen brightness should not be affected by the power plug either. "Nothing like waking the wife up with the flashlight tablet because it was going dead and you decided to plug it in while reading your technical manual at 2am."
4. Silent on schedule (Totally Silent, VIP Vibrate, VIP ring) (A feature that I wished both my bold 9700, and playbook had was a feature I'll call silent on schedule. The idea is simple, for the most part people know what time they need their phone to shut up and be quiet. Why can't RIM integrate silent mode with our calenders. A simple checkbox in the calender options and your phone (and playbook) will automatically stay silent, except for VIPs. It goes without saying that your ringer should go to normal at the end of the meeting, or court appearance (lots of lawyers use blackberry), lot's of students would appreciate this too. It would save us from having to constantly be changing our ringing mode all day. If I were RIM I would patent that one. (If you do, and want to send me a new touch screen phone as a thanks that's cool with me, but not required, just free thoughts for you to use however you want.)
5. Strange WiFi (The playbook has a strange issue where sometimes the wifi displays near zero. I don't know if this is software or hardware. My MBP and Bold 9700 have no such issue. It's a cisco/linksys router with dual g/n.
6. Before I forget, the web browswer is now awesome. Load times are acceptable. I would like to add though that of all the web browswer's the style, and color of this one is not what I would call "in fashion."
7. Idea: create an over the air sync system for the blackberry bridge. It should always keep the contacts, calender and maybe photos updated. Since, someone surely has a patent on this one, let me suggest a workaround called 1 at a time. Do an initial sync via usb to both devices on the desktop manager. Then only one device has to ever be connected to sync to laptop, as the other one syncs over bluetooth one item (contact, calender entry, photo at a time.)
8. Not always on bluetooth. Something tells me that it is not the most secure thing to leave the bluetooth constantly running and connected giving those keys over the air. Maybe it could connect at intervals (or upon status change (message, new contact, calender entry)). This might also save battery too. Just a thought.
I know how easy it is to forget about style, when mechanics are tinkiering around with the insides, but make the fastest car ugly, and no one will buy it. Also, Bill Gates was asked while in the presence of Steve Jobs what was the one thing Steve had he wished he had... Bill Gates said roughly "I wish I had Steve's eye for Style."
The truth is as technology advances, it will fade to the background. Fashion will be where people meed the device. People love a good running car, but gorgeous get's em into the showroom.
Oh yea, like the new keyboard a lot.

Have I mentioned how much i love my playbook now Great job on os 2.0

What was the last firmware version for the Zen Micro before M

I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
Please make sure you are 00% on this.
Thankyou.

I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

What was the purpose in removing the visibilty of cropmarks?

1). What was the purpose in removing the visibilty of cropmarks?
2). Why, when I go to create a jpeg using 'Save for web & devices', are my cropmarks ignored?
3). How is this new pop-up slider bar for gradients, better? It is absolutely unwieldy, and frustrating and complicates what was very simple.
I am a professional using your product ever since Illustrator88. What you've done here are not improvements. What you've done is uselessly tinker with things that worked perfectly. Why?

I frankly don't care what you think, Wade. I don't recall seeking your input at all. As I said earlier, I thought this forum was moderated by Adobe. I thought I was asking Adobe. Did I post "hey, Wade Zimmerman, let me get your advice"? No, I didn't. And believe me, just because you can't think of a reason, that doesn't mean there are none.
I set up print jobs in Illustrator. If you throw crops on the artboard when you start, you don't have to sweat format saves such as PDFs or save-to-web jpegs (which are less memory intensive than just saving to jpeg), grabbing content from outside the artboard. I realize there is a clip to artboard option in save-for-web, and a newly added 'use artboards' option when saving a PDF, but prior to CS4 you didn't need to mess with it, for everything to come out fine. My jpegs and PDFs are for client review. I realize you "do not need crop marks for web publishing", but when you use (in CS3) object>crop area, every other format you save respects those crops. I never said they should be visible in 'save-for-web', just respected. I want them visible when I set them on my artboard.
By the way, You're the only that I see in this thread, who says I'm complaining about nothing (frankly, I wouldn't care if everyone was). Do me a favor, Wade. Don't ever give me the benefit of your smug certainty or your "more logical approaches" on any further posts I may make. Let me suffer. There are a million ways to use this application. To assume that if you can't conceive of a use or process then it must be wrong, just drips with arrogance. If I want cropmarks, and apply them, then I want to SEE them on the artboard.

What was the last version of CS to include webpage creation as part of Automate?

The header says it all: What was the last version of CS to include the creation of web pages as part of Automate in the File dropdown?? I've tried to re-install the original CS on a separate machine, which fails, since it does not make nice with my current version, and the Adobe folks are ABOLUTELY NO HELP since it's too old!
Suggestions welcome.
Brian McNeill

The only thing i can think is your either referring to Automate>Web Photo Gallery or perhaps ImageReady.
As far as windows goes many people have photoshop cs running on windows 7.

What were the site designers thinking?

Please tell me, what were the site designers thinking when they redesigned the Adobe.com site?
I mean, I"m not un-savvy in the world of technology. I've been using it for nearly 20 years professionally. I write code, I engineer solutions, I even do reverse engineering on various technologies (software and hardware). However, the new site is so horrible to navigate, that simply finding the products I already own is nearly impossible. There's no "my downloads" or "My software", or even a "serial numbers for my crap" menu. Instead, there is a beautiful, but largely non-functional, set of menus, all perfectly aligned to the pixel for my particular browser and window dimensions.
The level of frustration with this approach is ridiculous. Sure, it looks great, but there is a decided lack of functionality. Even the search feature takes me to the trial downloads, not the main "All downloads for things I've already had the misfortune of purchasing".
Seriously Adobe, get it together and think about what your returning customers might need. Not what your art school instructors might want to see as a new cutting edge concept site layout. The site is beautiful, but REALLY LACKING in all the normal functional elements that a typical end or enterprise user would like to see. Counter intuitive would be the nicest way to describe the product access features. Please fix this.

This is the development forum for Adobe Business Catalyst - The website solution and for it's development.
You should only have access here if your on the BC development program and this has no relevance to the Adobe Site itself, the BC team has no involvement on that.

What's the difference between Mozilla and Firefox

what's the difference between MOZILLA and FIREFOX?

Firefox doesn't include the SeaMonkey suite.<br />
SeaMonkey is a separate program (not just a browser, but a suite) maintained outside the Mozilla Corporation.
From http://en.wikipedia.org/wiki/SeaMonkey
<blockquote>SeaMonkey is a free and open source[3] cross-platform Internet suite.<br />
It is the continuation of the former Mozilla Application Suite, based on the same source code.<br />
<br />
The development of SeaMonkey is community-driven, in contrast to the Mozilla Application Suite, which until its last released version (1.7.13) was governed by the Mozilla Foundation. The new project-leading group is the SeaMonkey Council.
</blockquote>

I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even h

I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even had upgraded to the Mavericks . I do not think it's fair to have to pay again and I would like to upgrade my operating system without having to pay again for the same system.

Hi anatuta,
Thanks for visiting Apple Support Communities.
It sounds like you are trying to upgrade your Mac to a newer version of OS X, after completing a fresh install of Snow Leopard.
If you have already purchased and downloaded OS X Lion and Mavericks, you should be able to find these items in the Purchased section of the Mac App Store.
You may find the steps in this article helpful with finding the items:
Mac App Store: Finding your purchased apps - Apple Support
If you do not see the items in the Purchased section, they may be hidden:
Hide and unhide purchases in the Mac App Store - Apple Support
All the best,
Jeremy

I have a mac powerbook g4 power pc processor, OS 10.5.8. what is the most current version of firefox i can use? i currently have 2.0.0.9 and am unable to auto or manual update

i have a mac powerbook g4 power pc processor, OS 10.5.8. what is the most current version of firefox i can use? i currently have 2.0.0.9 and am unable to auto or manual update edit

It was in the release notes for version 4 IIRC

IMac 21.5 inch mid 2011 white screen when I wake it, holding down mouse button and sweeping the screen restores the desktop. Any one else had this and what was the solution?

When the Mac is awaken from sleep mode the screen is white. I can hold the mouse button down and sweep the screen and the desktop reappears and everything works as normal..This just started and I am concerned that some hardware, video card or video memory is failing. Has anyone else had this problem and what was the solution?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

What other program do I need with Firefox 4?

05-12-2011 5-17AM
What other program do I need with Firefox 4?
Sincerely,
Barry Karas

You operating system already supports Firefox 4.0.1, so you don't need to install anything else.
Update via '''Help '''| '''Check For Updates'''.
You do however need to update Flash via http://get.adobe.com/flashplayer/
The version you have installed at the moment is a security risk. See http://www.adobe.com/support/security/advisories/apsa11-02.html

This is my first mac - what is the anti virus protocol with a mac?

this is my first mac - what is the anti virus protocol with a mac

Try using ClamXav 2.2.4. If you are not now using a hardware router I highly recommend you do so. Preferably use Ethernet for your local network. If you use wireless be sure it's protected by using WPA2 security.
Use your head and don't download something when you don't know what it is, what it does, or where it's from. Stay off of unknown websites and don't click links if you think you're not sure what will happen.

What was the dev team thinking with Firefox v29?

Similar Messages

Maybe you are looking for