What was updated in latest version
Where do I find what was updated in the latest version of itunes?
Thanks
See > http://support.apple.com/kb/DL1615
Similar Messages
-
I was updating the latest version for my I-phone 4s and now my phone is frozen. It will not shut off. When I try to shut it off it shows an i-tunes connection and then goes black.
See http://www.apple.com/support/iphone/assistant/phone/
-
Anyone know what was updated in Shake 4.1.1?
I found it interesting that Shake 4.1 was included in any update at all.
Anyone know what was updated. My version is running smooth already.
Thanks,
Edhttp://support.apple.com/kb/TS2423
-
i plugged in my ipod touch last night to update to latest version and there was some sort of problem and it said i needed to restore so i did. And now it just keeps saying it can not find my ipod. it used to say "crystal's Ipod" now it says "ipod" on the left. HELP!
Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.
-
I'm trying to update the latest version of iTunes but my computer gives me an error saying to go to tools then download only and update manually. What do I do?
Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
Updated the latest version of java. Now it blocks websites that use it Security settings on safari are set to allow use. What can I do to fix/
gamegate.com is one of them. My security settings are set to enable javascript and allow java.
-
Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?
This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation. -
My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
ThanksTry a different cable. And are you connecting directly to your computer or through a USB hub?
-
I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?
stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad? -
Iphoto will not open anymore, and tells me to "Update the latest version" even though I have it.
HELP! I have the latest updated version of OS X Lion, but now my iphoto will not open anymore and keeps telling me to "Update the latest version". SO then i tried to update it again and again, but it just does not work. What do I do?
What version of iPhoto do you actually have?
-
Ever since updating to latest version of Firefox it has been painfully slow on my Mac running OS 10.5.8.
Websites just hang, and never get to where they are supposed to go. The status loop on tabs just spins and spins but never loads the site. Go to the same site on Safari and there in a second. It is like dial up slow. Have tried all the troubleshooting tips(reset, delete/re-create profiles, uninstall/reinstall, updated flash) nothing works.
Firefox had been working fine until latest update. What gives?'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "Continue in Safe Mode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
I was updating the latest software i.e iOS 6 on 3gs and battery got finished and now I cant turn my phone on and when I update it with itunes error 3194 comes up
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
HT201210 update to latest version 4.2 but unknown error occured (11)
install update to latest version 4.2 but unknown error occured (11)
The iphone "acer's iphone" could not be updated. An unknown error occured(11)
Message was edited by: N M Patel -
Music does not sync properly when updated to latest version. Can see on computer but can't play from ipod.
Hope this helps...
I was having the same problem where only 1.7GB of 10GB of selected music would sync so I decided to start fresh. The following steps worked for me:
1. Open itunes and connect iphone 5 if not already. Uncheck all playlists, artists, etc. till nothing is checked to sync. Then uncheck the sync music box so that all music will be removed from the phone. Sync iphone
2. Eject device. Quit itunes (don't just close). unplug iphone.
3. Restart imac, macbook, or PC.
4. Restart iphone.
5. Now after power up, restart itunes then plug in iphone, check sync music and select music to sync. Sync iphone
6. It worked for me!!! Good luck. -
Am using Blackboard to teach classes at college. Have not updated firefox at college, works great. Wife hit yes to update to latest version last week. Now can nan not reply in the discussion board, the curser is not recognized in the dialog box.
Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Maybe you are looking for
-
Error on startup QuickTime and iTunes: (Windows XP Pro SP2) EventType : BEX P1 : QuickTimePlayer.exe P2 : 7.4.1.14 P3 : 47a28143 P4 : QuickTimePlayer.exe P5 : 7.4.1.14 P6 : 47a28143 P7 : 0000130d P8 : c0000409 P9 : 00000000
-
Report generation for users assigned to Function
Hi friends, We require an report should consist of the following contents. Usr ID(Mandaory) | First name(optional) | Last name(optional) | Function(mandatory). We are not able access USER_ADDRS table which gives all this datas. So, We are looking f
-
How To Eliminate Separate Search Results Window in iTunes 11
From my perspective (based upon how I use iTunes to create playlistsby searching for titles, listening, and selecting), the new format in iTunes 11 of showing search results in a separate window was totally unworkable. Fortunately, I found a CNET art
-
Hi, Have a mac mini server running 10.6.3 and running mail services. I have set up to have a mailbox where all mail is copied too that goes through the server. I cal it Post. We do development business and when an enquiry comes in I have the server (
-
Searchhelp-Exit: F4IF_SHLP_EXIT_EXAMPLE
Dear developers, our company produces SAP add-ons which are supposed to run under 4.6C as well as under 4.7 Enterprise. As far as ABAP commands are concerned some of which behave a little differently in both environments, we usually solve those probl