What were the original speakers for the G3 B&W PowerPC?

I am looking to get a set of speakers to go with the cherry 21" CRT Studio Display I picked up (it still has the clear plastic on the apple logos). What are the original speakers that would have been available for this computer? Will any of the the harmon kardon spheres or sound sticks work with this mac? What is a Digital Sound Port (is it just a fancy way of saying L/R/Ground/DC-Power on a four-pin jack like the appletalk mics)? Is USB 1.0 fast enough to run the spheres that were available with the G4 Cube? I am seeking historical accuracy without going beige. Any oldtimers that can remember that far back please offer your sugestions.
Hooked on the Shape

Hi, funkymonkeypie -
The B&W G3 models did not come with any external speakers as a standard option; the only speaker they came with was the built-in mono one.
All Macs prior to the G4 Digital Audio model (except the Cube) had analog sound out ports. The Cube had a special external USB amplifier arrangement.
Not positive, but I believe the USB ports on the B&W G3 were USB 1.1, not 1.0, and are the same as the ones on the Cube. Don't know if the amp and speakers that came with the Cube will work on the B&W.
Don't know the answers to your other questions - perhaps someone else will post in with those.

Similar Messages

  • HT204003 does the passbook app work on the iPhone4 because I downloaded the apps for it but I continue to see the original screen for the app and I can't find passbook in my settings.

    does the passbook app work on the iPhone4 because I downloaded the apps for it but I continue to see the original screen for the app and I can't find passbook in my settings.

    Some time in the future (Starbucks Tweeted the other day "by the end of the month") the Starbucks app will be Passbook enabled. When that time comes, you will log into the app with your credentials, select your Starbucks card, and you should be given an opportunity to add that card to Passbook at that time. From there, whenever you walk into a Starbucks the alert will be displayed on the lock screen, just slide your finger across the the alert and show your card to pay.
    Now, I have not seen the new app, of course, so I am just speculating based on how the Walgreens, Fandango and Target apps work. Also, I am not sure yet if this will work in any Starbucks, or just the one that you consider your favorite, or primary location. Again, that is just based on how the other apps seem to work. We'll see.

  • For some reason I am unable to access my purchased itunes music from my icloud or from my computer.  I suddenly get this message: say that I the original location for the song cannot be found.

    For some reason I am unable to access my purchased itunes music from the purchased folder in the itunes store or in my icloud.  The descriptions of the songs I purchased are there, but when I attempt to play them it says that the original location of the song cannot be located.  This is so frustranting. How do I get my songs back??

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • What's the best speakers for the Z3

    Today I was looking at some induction touch speakers and they were mainly made for the iphone and wouldn't really work with the sony z3.  So what would everyone suggest??  Should mention that I'm trying to go for something wireless.

    http://www.sonymobile.com/global-en/products/accessories/bluetooth-speaker-bsp10/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • HT3939 what is the original firmware for iphone 3gs model number a1303?

    what is the original firmware for iphone 3gs model number a1303?

    What does it matter?
    What is the issue you are trying to resolve?
    The current version of iOS for the 3GS is 6.1.2.

  • My ipod may have crashed while trying to update new os.4. it;s been trying to restore original setting for the next 10 hours without success. what do I do?

    My ipod touch4 may have crashed in trying to up date to the new ios. 4.3.4. I have not been successful in attempting to retore back  to original setting for the past 10 hours. What do I do next.

    Fix iOS Apps Stuck on “Waiting…” During Download & Install
    Fix iPhone Apps Stuck "Waiting" During Installation

  • After installing the latest of iTunes the original files for almost 300 songs cannot be found for syncing to my iPod. The files are songs that were bought from iTunes, and copied into iTunes from CDs.

    After installing the latest of iTunes the original files for almost 300 songs cannot be found for syncing to my iPod. The files are songs that were bought from iTunes, and copied into iTunes from CDs.

    Apparently, security programs like Macafee and Norton view Itunes updates as new programs and block then from access. If you add Itunes to the list of exemptions, it solves the problem.

  • The operation can't be completed because the original item for " your drive name here " can't be found

    Hey all,
        I hope someone can help.  I am running 10.7.5 OSX currently on my Mac Book Pro.  I recently got a new Windows 8 desktop.  A ceap one running Windows 8.  I currently have 5 drives shared over my home network.  3 are working just fine (the 3 I just put on the network today).  The other 2, however, were previously on my old Windows Vista computer also shared over my network.  My Mac Book Pro had access just fine (I set up sharing on my vista comp) and everything ran smooth.  Today when I hooked up my new Windows 8 computer and put the 5 drives on and shared them via my network, same way as I done before, 3 are working fine but the two original drives give me an error when I try and access them from my Mac over my home network.  They both show up with the correct names but when I try and access them it tells me:
    The operation can’t be completed because the original item for “M&V” can’t be found.
    M&V is the name of one of the drives.  Here is the trouble shooting I have done:
    - Renamed the drives multiple times
    - Tripple checked my permissions
    - Checked for updates and installed both on my PC and Mac
    - Restarted my PC and Mac
    - Tried Both of my dual frequencies on my netowork
    - Tried hooking up with ethernet cable
    - Changed the user name and password for my shared access on my PC multiple times and put in the correct info on my Mac
    - Tried taking away all passwords (unsecured)
    - My other Windows PS's can access all drives just fine
    But still I get the above error.  I have isolated it to an issue with my Mac. I was thinking maybe if there is a way to have my Mac forget the shared drives and I can re-add them and put in my password, I am not sure if that is even possible. I am at al loss on what to do.  Any help you can give would be greatly appreciated. 

    I am having the same exact issue and I've been busting my testi-balls to figure it out. I've got 15 years experience in the computer game and still can't figure it out. I see a lot of people having similiar issues, but no one seems to have an answer for MY issue, which is virtually the same as the OP.
    Brand new Macbook Retina.
    Windows 7 x64 Machine.
    ALL drives shared with ALL permissions of ALL accounts manually inserted on the Windows 7 side.
    ALL other PC's in the house can access the drives on the Windows 7 machine without issue.
    Only the Macbook Retina has the problem connecting. Every Windows drive I shared is visible under "network" in finder, but when I click on any of them it gives the quoted error message the OP stated.
    PLEASE, if anyone finds a fix for this, let us know!

  • My iTunes account says that it cannot locate the original file for all of my songs.  My iPhone still has all the music and is able to play the songs, if I sync and backup my iphone will the songs be replaced with the empty copies from my itunes library?

    So basically I tried to back up my itunes library to my external hard drive and when I followed the instructions and then went to play a song it said Orginal file cannot be found. It said that for all of the songs. I'm not sure how to fix what I did, I already tried consolidating and all of that stuff and it didn't locate the files.  I'm guessing that I somehow deleted the original songs along the way.  I synced my iPhone without knowing what I did and surprisingly all of the music is still on my phone.  So now that I've completely screwed up my iTunes account, I need to know how to get all my music back onto my iTunes account and have that library only on my external hard drive, not my computer. Everything looks fine on my iTunes besides the fact that it cannot locate the files but what I'm afraid of is me syncing and backing up my iPhone and then being left with no music because it syncs to the empty songs.  How can I fix this? and if I can't fix my iTunes library is there anyway for me to still be able to backup my iphone and all the music on it, without erasing my music?

    Well I'm not sure if I correctly backed up my itunes library because when trying to open itunes from that back up it keeps saying original file not found. Okay this is going to sound confusing but bear with me.  I "backed up" my itunes, meaning I just dragged and dropped the iTunes folder into my external hardrive, and then I changed the destination on iTunes to open from my external hardrive.  It was working fine when I did that, however I did that just on my own, I didn't know about consolidating the files or any of that so I hadn't done that before copying the folder to my external hard drive. I can't remember but I'm pretty sure I deleted the iTunes folder after I had copied it to my external hardrive. So I did that and it was working fine, I was able to open my itunes with my external hardrive.  BUT yesterday I thought that I hadn't done it correctly because I didn't consolidate the files and all that, so I wanted to be more thorough and do that, I followed the steps to do that but when I did that I think it got all the files from my computer and not from my external hard drive so it basically didn't find anything on my computer because I had deleted them. And like an idiot, I replaced the iTunes folder on my external hard drive (the one I did correctly the first time), with the one I did wrong. So I believe I pretty much deleted all the music files from both my external hard drive and my computer. Please correct me if I'm wrong?
    I believe getting all my music back on my itunes is a lost cause. BUT I still have all my songs and stuff on my iPhone. My question is, if I plug my phone into my computer and sync it, will it erase all my songs from my phone? A little more info, my iTunes still has the names and stuff of all my songs, they just can't be played because the files are missing, my iPhone doesn't need to erase and sync when I plug in my phone because it's already synced to my computer. What I'm afraid of is when I plug in my phone to backup and sync, will it erase my music because it can't find the files on my computer or external hard drive anymore? Or will it just leave the songs because they're already there (on my phone) and only sync the new songs that I've downloaded? I just need to know is my iTunes still going to be functional as far as me being able to backup my phone?
    I have a lot of songs purchased from iTunes but a lot (like 60%) are from CDs that I no longer have. So re-downloading my music would only account for 40% of my library.

  • When using Iphoto to import photo from existing folder, what happens if I delete the photo in Iphoto ? Will the original file in the folder be deleted too?

    When using Iphoto to import photo from existing folder to iphoto, what happens if:
    1. I delete that photo in iphoto? will the original file in the folder be deleted too ?
    2.  when importing, does the hard disk store 2 versions of the photo, hence occupying additional space in the harddisk?

    1 - no  --  iPhoto only manages fiel within the iPhoto library - it does not ever do anything with files outside the library
    2 - No idea what you are asking - by default (and strongly recommended) iPhoto copies the original to the iPhoto library and you delete the source file outside the iPhoto library - iPhoto alwasy has at least two versions of every photo and some times three - it always have the original, a thumbnail and once a photo is modified a preview - this is not optional - if it is not what you want then iPhoto is not the correct progrtam to be using for phopto management
    LN

  • How can we disassociate an Apple ID from a set of computers formated from a single computer using Carbon Copy Cloner and a single image and then Migration Assistant to install their old profile? The original ID is the Apple ID for all the stores.

    Here is a bit more detail.
    We were replacing old teacher machines and wanted to do it as efficiently as possible. Therefore, we set up one computer, through the OS installation and ran all updates, and then made a disk image so that we can use Carbon Copy Cloner to image all the other computers without having to run all the other updates. Once they were set up to a base level and assigned to a teacher we used Migration Assistant to import all their old files and items. Everything has been fine until recently the computers became aware of needing an update for one or two apps. The machine asks for the original computer's Apple ID for all updates. We have logged out of the apple id and back in with another to test if running the updates will work with that Apple ID and even after a refresh it still asks for the other Apple ID. How can we disassociate the Apple ID from those other computers so that the individual who owns the original is not needed each time there is an update or has to give out their Apple ID password?

    There are two parts to this:
    1) It may be that you should have an Apple Education Support person helping you with this. If you have enough computers for this to be a problem, you may benefit from a Server, a site license, and an occasional visit from an Education Support Specialist.
    2) The brief answer, if you want Individual Apple_IDs to control each computer, is to buy new copies of Mac OS X under those new Apple_IDs and re-download and re-Install. Mac OS X is customized to the Apple_ID before it is downloaded.

  • The operation can't be completed because the original item for "EXTERNAL" can't be found.

    After upgrading to Mountain Lion I can no longer access my exFat formatted USB drive that is connected to my iMac from my MBP. I can connect to the iMac, but when I try to mount the USB drive I get an error message saying "The operation can't be completed because the original item for "EXTERNAL" can't be found."
    I have enabled only 'SMB' in sharing preference on all of my machines, and all are running Mountain Lion.
    *I have since tried connecting directly with the IP address, same result, and also reformatting the USB drive to just FAT32, same issue. I need the drive formatted in a windows format so my home theatre system can connect to it.
    Message was edited by: davea3323

    Update, So I disassembled the external hard drive case and pulled the bare drive out and connected the drive directly to my motherboard and without change any settings on the PC, the MacBook can now access it over the network. What is it about externals that the Mac can't access them over networks?

  • An error occured while creating the original attribute for message no26 296

    Hi All,
              I am new to DMS , we are trying to store PM documents on content server , created a storage category and while assigning files to storage category then on saving the document i get the below error :
    An error occured while creating the original attribute for
    Message no. 26 296
    Diagnosis
    An error occured while creating an original in the Knowledge Provider.
    System Response
    The original could not be created.
    Procedure
    Contact the systems administrator and check the log file (transaction Evaluate application log, object SDOK).
    Please let me know what configs i am missing ...
    Thanks in advance
    regrds
    pushpa

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • Diappearing photos replaced by an exclamation point within a triangle.  Prior to loading Lion I could put the image number in finder and locate the original file for that photo.  How do I restore photos now?

    I had problems with photos disappearing and being replaced by an exclamation point within a triangle.  I can see the photo in the thumbnail summary but when you click on it, the screen goes black and the exclamation point within a triangle appears along with the info on the original image number (i.e., img_1120.jpg). Prior to loading Lion, I could go to Finder, enter the image number and locate the original file for that photo.  I could then restore it for editing, copying into Print Shop directly, etc.   That no longer works after installing Lion.   How do I restore photos now?  I have 100s of photos that I have been going back to the original files and restoring and I am frantic that I will no longer be able to get to the original files.  Please help!  Thanks

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    What version of iPhoto? Assuming 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • An error occured while creating the original attribute for

    Hi All,
    We encounter  this error in  "An error occured while creating the original attribute for " DMS  very often when a user edits a file & tries to check in.
    I searched the forums & realized that this is caused by the inconsistencies in the KPRO & DMS server and removing these
    inconsistencies will repair this issue.
    I have been deleting the inconsistencies using DMS reports DMS_KPRO_READ & DMS_KPRO_CHECK1 and it resolves the error
    so the file is unlocked. But I haven't been able to figure out the ROOT cause of this issue.I couldn't find any information on the root cause of this issue. What can be done to fix this error permanently.
    Regards
    -Neha

    Hi Neha,
    Please go to transaction SE16 and enter 'SDOKPROP' as table. Then enter 'DMS*' in the field PROP_NAME and press F8. Now all DMS related entries should be displayed to you. Please compare them with the following entries displayed in the attached screenshot and maintain the missing entries.
    DMS_ACTIVE_VERSION 00 Active Version
    DMS_APPLICATION 00 Logical application
    DMS_CHECKOUT_USER 00 Checkout User
    DMS_CREATE_AUDIT 00 Generate new version of the original
    DMS_DEFAULT_LANGUAGE 00 Default Language
    DMS_DELETEABLE 00 PHIO deletable
    DMS_DOC_KEY 02 IWB_DMS01 DMS_DOCKEY Document info record
    DMS_DOC_VERSION 00 Version of relevant document
    DMS_DRAW_APPNR 00 Application number from DRAW
    DMS_DRAW_DTTRG 00 Data carrier from DRAW
    DMS_DRAW_FILEP 00 File name from DRAW
    DMS_FILE1 00 File name(firstpart)
    DMS_FILE2 00 File name(secondpart)
    DMS_FILE3 00 File name(thirdpart)
    DMS_FILE_ID 00 GUID that points to table DMS_PHIO2FILE
    DMS_FRMTXT 00 Format description, ID of additional file
    DMS_MUP_CAT 00 Markup category
    DMS_MUP_FLAG 00 Markup flag
    DMS_ORDER 00 Sequence of additional files
    DMS_STATUS 00 Document status
    DMS_STATUSNR 00 Number in status protocol
    DMS_STATUSNR_X 00 References to Status Log
    Please pay attention that all entries are typed well and that there are no spelling errors. If all these values are maintained correctly in table SDOKPROP the dump and the error message should no longer appear.
    For further information you can also see the corresponding SDN WIKI page under
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/error26296in+CV01N
    Regards,
    Ravindra

Maybe you are looking for