What will be the Upper Limits for Performance Metrics for Alerting

Hi,
We are planning to monitor the Performance of Cloud Services hosted onto Azure through VisualStudioOnline [TFS].
What will be the Upper limits for below metrics per cloud service hosted on Azure:-
CPU Percentage
Disk Read Bytes/Sec
Disk Write Bytes/Sec
Network In [Bytes/Sec]
Network Out [Bytes/Sec]
Thanks for the help.
Regards, Subhash Konduru

Hi,
An alert rule enables you to monitor a Azure service based on a metric value. When the value of a specified metric violates the threshold assigned for a rule, the alert rule becomes active and registers an alert.
To create an Alert Rule, you might want to check the below article
https://msdn.microsoft.com/en-us/library/azure/dn306638.aspx
To know more on the limits please follow the link
http://azure.microsoft.com/en-in/documentation/articles/azure-subscription-service-limits/
Hope this helps !
Regards,
Sowmya

Similar Messages

If BW system is down for several hours, what will be the status of the Jobs

Hello Gurus,
   I don't know where i should post this issues! anyways .....! i need some information. One of our BW production system will be down for about 12 hours tomarrow to move it on to new hardware and this current system has lots of scheduled jobs with run daily and hourly..! so my question is ..what will be the status of this jobs which fall in between this down time?
     as per our basis team information....they said that all these jobs will be queued up and when once the system is online ...these jobs will access all the avalable processess and if this thing happen....! then the system will have a VERY BAD performance and user cannot use this BW system...they cannot even open the bex analyzer.
      so...i thought of deleting these queued jobs. can any one tell me WILL THESE JOBS WILL BE SCHEDULED FOR NEXT DAY??? OR IS THERE ANY OTHER WHY TO CONTROL THIS SITUATION?? our process chains are locked for modification..so, we cannot even re-schedule them in prod system.....
         aaaaaah! can any one HELPP MEEEEE@
I will award full points for your suggestion

Hi,
when you'll restart you SAP system all jobs will be displayed with a delay since they didn't run during your downtime.
And that's true that they will be queued and fired as soon as a system resource will be available. That means a lot of paralel processes with system overload and usually subsequent errors in loading data.
As per suggested already, the best would be to shift the scheduling.
Another option is to execute the report BTCTRNS1 before shutting the system down. This will change all background job status to a "suspended" mode.
when your system is up again you will be able to release (or reschedule or cancel or any other action) single jobs in a controlled manner.
When you've finished with this task then don't forget to run BTCTRNS2 in order to enable background jobs to be executed.
hope that helps...
Olivier.

What will be the price of the "Photoshop Photography Program" after the "limited time" is ended?

The information currently available is "For a limited time, you can join a special Creative Cloud plan"... And it's just US $9.99/month when you sign up for a one-year plan.
I understand that Adobe will not announce in advance price increases but that's different; it's advertised as a limited time offer so we know it's not the regular price.
We need to know what will be the regular price as it will be a recurring fee.
I now own a regular licence of Lightroom 5. If I sign up for the CC version It's almost a one way road, there's no return and I will be at Adobe's mercy.

mgibeault001 wrote:
With all respect, I cannot quite base my business choices on your understanding... I need a definitive answer.
I don't think you'll get one. Do other software companies offer long-term future price information?
mgibeault001 wrote:
Since they advertise this as a "limited offer" (ending end of May), my understanding is that it can be priced at $49 (or any other price) a month after that.
I've told you what I've read, but that wasn't a guarantee, so I guess they could put the renewal price up by 500% at the end of your year's contract.
mgibeault001 wrote:
And there's no assurance that upgrades to LR perpetual will be available in the future. We would be locked in CC because our current LR5 will not be able to read LR6' catalog.
Yes, quite true. They've said that Lightroom including new versions will be available for perpetual licence for the forseeable future (or some similar words), but maybe Adobe can forsee only 6 months.
Do you have an alternative? Do you have long-term guaranteed product and pricing strategies from other suppliers?
PS - what is clear is that new products are likely to be CC-only. For example, Lightroom Mobile is CC-only.

HT4597 what will be the new alternatives for iWeb publishing, Idisk & photo gallery ?

what will be the new alternatives for iWeb publishing, Idisk & photo gallery ?

Thanks for the reply that there will be 3rd party support.
One of the main reasons why I went from PC to Mac was because of all these cool features.
Am dissapointed to see them leave. ( Iweb, Photogallery, Idisk... )

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

Hi Carsten...good luck with your project.. I had just about as many Video8 & Hi8 tapes as
you that I digitized and eventually brought into FCPX..took me many months not weeks
to do so,BTW, as each tape was 60-90 minutes in lenght...and many hundreds of
gigab ytes of storage ( uncompressed AVI files)..it's tedious work unless you plan to farm
it out to a processing house...also regarding eventual storage format...remember
Hi8 is 400 lines or about 540X480 in todays resoultion metrics..you can't make hi-def out
of source that starts out as 400 lines...in my case I rewrapped the avi files into .mov
containers and imported the mov files into FCPX where I got rid of the hundreds of
minutes of Colorado mountain landscapes to get to that one minute shot of the kids
on horseback ( late 80's for most of my archives)..so its a job..scouring thru 30X90 min
of source to not miss those precious memories takes diligence and hard work but its worth
it; eventually I encode the uncompressed video I want to save in H.264 format Staandard
Def not HiDef

Mac book pro hanging very often what will be the possible cause for it?

hi my mac book pro is 3months old and nowadays its hanging very often like when iam surfing, and some times when i dont use it for 10 to 15min.
can anybody suggest me what will be the possible cause for it.
Thanks

Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao.

What will be the cost for iphone 5 replacement which is in warrenty but accidentally damaged.not screen it's just back glass of camera,so what will be cost to fix it or replace the phone in indian rupees, USD will work.

what will be the cost for iphone 5 replacement which is in warrenty but accidentally damaged.not screen it's just back glass of camera,so what will be cost to fix it or replace the phone in indian rupees, USD will work.

If you are in India, contact your local service center for a price quote. I don't know if Indian service centers can replace just the back glass or if they will need to replace the entire iPhone. To locate a service center, see:
https://locate.apple.com/in/en/
Make sure you select "iPhone" for the product time. Only certain service centers can handle iPhones.
Regards.

What are the steps doing a performance tuning for pertcular program

What are the steps doing a performance tuning for pertcular program

chk this link
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
checkout these links:
www.sapgenie.com/abap/performance.htm
www.sap-img.com/abap/ performance-tuning-for-data-selection-statement.htm
www.thespot4sap.com/Articles/ SAPABAPPerformanceTuning_Introduction.asp
Message was edited by: Chandrasekhar Jagarlamudi

Are there any limitations for importing Apple Aperture Libraries for Lightroom 5.7 ? What can be the hardware limitation importing large Aperture Libraries like 200 gb ? Or is importing larger Aperture Libraries even possible at the moment for Lightroom 5

Are there any limitations for importing Apple Aperture Libraries for Lightroom 5.7 ? What can be the hardware limitation for importing large Aperture Libraries like 200 gb ? Or is importing larger Aperture Libraries even possible at the moment to Lightroom 5.7 ?

dj_paige wrote:
As far as hardware restrictions, the only one I can think of is that you certainly need enough free space on your hard disk to accomodate the masters from your Aperture library.
IIn which case, ensure all your masters are "referenced" in Aperture, and that you then go to Options in the Lightroom import box and import photos in their existing locations.

HT5624 my child created a passcode for my i phone and he forgot that what will be the reset procedure

my child created a passcode for my i phone and he forgot that what will be the reset procedure

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

What will be the consequences of changing the apple ID on my iPad to a different apple ID on my iMac?

Hi,
I have an (iPad 2) and an iMac (2012). I have one apple ID used for both the itunes and appstore on the iPad, and on the iMac a different apple ID used for the appstore and itunes. What will be the consequences of changing my email ID on the ipad to the one used on the imac? I don't want to delete the iPad apple ID, just never use it again. I just want to work with 1 apple ID over the 2 devices.
I have purchased apps on the iPad and other documents/movies/books etc and if I sync to the iMac will all that be deleted? How can I just use the one apple ID for all? Does it mean that every time I connect my iPad to the iMac that I have to login to itunes using the iPad apple ID? Maybe it is that simple I don't know.
What will be the consequences of doing this and is it possible?
Thanks.

settings->itunes & app stores->click appleID and choose logout

HT204380 How can I make a face time call from one country to another( supporsing both parties using iphone 4s). What will be the caller charges. If there is no charges as we use wifi, will there be a charge till connecting the call?

How can I make a Face Time call from one country to another( supporsing both parties using iphone 4s). What will be the caller charges. If there is no charges as we use wifi, will there be a charge till connecting the call?

FaceTime is free to use. You will not be charged for using FaceTime.

Iphone 5 Battery efficiency is bad.....What will be the cost of replacing a battery in the apple store..??

what will be the cost of replacing a battery in the apple store..??

Apple has a battery replacement program for some devices sold between Dec 12 and Jan 13.
Check your device if it's eligible for this program or not https://www.apple.com/support/iphone5-battery/other_countries.html
Besides, go to any App Store and ask them to run ADR test for your device and will see the battery life. If it seems fail or consumed then you should replace the battery. If seems pass, then restore your device if you think battery drains too fast.
see the pricing Apple - Support - Service Answer Center
choose the country from list and will see the all info upon service costs

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
    when s.HealthState = 1 then 'healthy'
    when s.HealthState = 2 then 'Warning'
    when s.HealthState = 3 then 'Critical'
    else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

What will be the peoplesoft query to calculate voluntary termination count and involuntary termination count? I am working on OBIA HR analytics workforce deployment reports and need to validate the reports

what will be the peoplesoft query to calculate voluntary termination count and involuntary termination count? I am working on OBIA HR analytics workforce deployment reports and need to validate the reports. I also want to know the tables involved

Hi Andrew,
Part A:
I've done some restating of the question, and distributed the calculations among several fields, not all of which need to be included on the visible layout. Other than formatting the Date fields and moving the 'Completed Date' field and its label, I've left this in the default "Layout 1" produced by AppleWorks.
Field List:
Priority: Popup menu with six items: 00, J, D, 1, 2, 3 Defaults to 00
TL (time limit in months): Calculation: CHOOSE('Priority',0,1,3,4,6,12)
Received: Date. Option: Automatically insert today's date (ie. Date Record created) (may be edited)
Target Date: Calculation:
DATE(YEAR('Received')+INT(MONTH('Received')+'TL')/12,MOD(MONTH('Received')+'TL', 12),DAY('Received'))
Remaining (Days): Calculation: INT('Target Date'+1-NOW()) (see revision below)
Completed: Checkbox. Set default value to Unchecked.
Completed Date: Date: Entered manually
OnTarget: Calculation: IF('Completed',IF('Completed Date'<'Target Date',"On Target","Over"),IF(INT(NOW())>'Target Date',"Over","On Target"))
The On Target field shows the current status of the case while still open, and the state on the closing date when it was closed.
Having done that, I was unhappy with the Remaining field continuing to calculate an ever larger negative number after the case had been closed. Hence this revision below:
Remaining: Calculation: IF('Completed','Target Date'-'Completed Date',INT('Target Date'+1-NOW()))
Shows the number of days remaining while the case is open, the days remaining at completion if the case has been marked Completed and the completion date entered.
Rsults (and some further formatting of the Layout) below.
Part B:
You will need Subsummary parts when sorted on Completed and on On Target. Fields can appear on a Layout only once, so each subsummary part will need a separate Summary type field for each field to be summarized.
Regards,
Barry

What will be the Upper Limits for Performance Metrics for Alerting

Similar Messages

Maybe you are looking for