What will happen if we try to flow saved entries in SMQ3 to CRM?

Hi,
We are working on CRM 4.0 system.
While monitoring queue failure what we normally do is, we save the queue entries in SMQ3. So other queue entries will flow to CRM from R/3.
Now we want to know what will happen in following scenario:
We have created sales order 0010203 in R/3 while doing replication it is showing some error SYSFAIL. What we have done is we have saved that perticular queue entry(LUW) in SMQ3. So that other queue entries can flow to CRM.
After doing analysis using SMW01 we have found that there is some configuration miss in CRM which cause the problem so I have changed sales order 0010203 in R/3 to avoid that error.
Now since I have changed my order it flows to CRM with out any error.
so my sales order now present in CRM.
Question:
Now we have completed the configuration misses in CRM.
Now if I try to activate the saved LUW entry in SMQ3 and try to flow the queue entries what will happen?
My sales order in CRM will have latest information as of R/3 or the information in Bdoc which I have saved in SMQ3 will overwrite the latest information.
Please help.
Regards,
Dhanraj Dange

Macbook_Juice:
Please do not bother to install Windows XP with Service Pack 1. It will not work and the installation will more than likely not finish. Save yourself the headache and get the right copy of Windows which work with Boot Camp.
Axel F.

Similar Messages

I want to get a Nikon D3100, but my macbook has OS 10.5.5 on it and I've read that the D3100 needs at least 10.6.5. What will happen if I try to use this camera with my computer? Will iPhoto simply not recognize it or will I get distorted pictures, or..?

I want to get a Nikon D3100, but my macbook has OS 10.5.5 on it and I've read that the D3100 needs at least 10.6.5. What will happen if I try to use this camera with my computer? Will iPhoto simply not recognize it or will I get distorted pictures, or....what?

andyBall_uk wrote:
The manual says
❚❚ Supported Operating Systems The supplied software can be used with computers running the following operating systems: • Windows: <snip>
• Macintosh: Mac OS X (version 10.4.11, 10.5.8, 10.6.4)
Nikon say that you need 10.6.5+ for the latest firmware, although I don't see why.
Thanks for that! I was looking for that manual, but for some reason, couldn't find it.
I guess I'll have to contact Nikon and find out what the real story is. The camera was introduced in '08 or '09, so I'm wondering why you'd need software as recent as 10.6.5??
Still very confusing. :-?
Why does it state that the camera is compatible with "10.4.11, 10.5.8..."? Does that mean that anything between 4.11 and 5.8 is incompatible???
BTW, I tried downloading the 10.5.8 combo update recently and got an error message that the update was "corrupted" after it was all downloaded, so I was not able to install that.

What will happen if I try to install XP SP1 under Boot Camp?

Hi all. I'm new to the discussion and to the Mac world.
Before I go buy XP sp2 or sp3; does anyone know what will happen (nothing will work or limited functionality) if I try to install XP SP1?
Don't want to try it if I'm going to "break" something...
thanks in advance.

Macbook_Juice:
Please do not bother to install Windows XP with Service Pack 1. It will not work and the installation will more than likely not finish. Save yourself the headache and get the right copy of Windows which work with Boot Camp.
Axel F.

When you block someone what will happen when they try calling and texting you?

I recently blocked someone they have a different phone carrier. When they text me and call me what will happen? Will they know if they got blocked?

They might get a message when calling that the call couldn't be completed. I don't know what happens when they try to text you.

What will happen if I try to install Mountain Lion on a 2006 iMac?

I'm interested to know because the app store app updated some software like the iWork package and a few others and advised me to install Mountain Lion to use the new features. Will Mountain Lion install at all? Will it run on my machine at all? Will I just not be able to use some of the new features?
Can I try it out by installing on an external drive to see what happens?
Thanks for any comments.
Scott

it will tell you that this version of osx is not compatible with your computer. Don't waste your time.

What will happen if I try to install Fireworks on a 1024x768 display?

I noticed the system requirements said 1280x1024, while the other CS5 apps merely recommend a screen that big and have 1024x768 as their stated minimum screen resolution.

Why not download the trial version and see if it works OK for you? I imagine the only problem you might encounter is that the interface might seem cramped if you have all the panels loaded at once.

What will happen if my iPod touch is over flowed with memory?

hi there i have my ipod touch and that i put stuff in my ipod and that it was overlowh ed wthall my stuff and it was over by2.4 GB and i wonder what will happen if i leave it alone?

Naturally, it will explode!
Seriously, what do you mean "overflowed?" I suspect that you're talking about something that is simply not possible.

What will happen when redo log file or archive log file, which is yet to be

What will happen when redo log file or archive log file, which is yet to be read by logminer is corrupted? It seems that the captures process hangs between “Paused for flow control” and “Enqueuing Messages”. How to come out of this condition without recreating the captures process?
Any clue is helpful
Thanks in advance for your help.

Basically you can't skip SCN since it will result in a data integrity issues (say you had skipped some inserts and later there will be some updates to a not replicated data).
Streams maintain their own checkpoint tables with transaction related stuff. So there is no way you can jump over a range of SCN's without recreating capture.
The only thing you can try - temporary give capture process a rule without any objects. But it will need to mine through the redo anyway.

If a new apple id sign in.what will happen to the old apple id if you erase or reset the phone?

I buy a new iphone 5s and the store open it and put his apple id to download some stuff.. And after that i try to make my own apple id. What will happen if i erase all data and it is in need of apple id.. Will it be the old apple id or my apple id?? I heard that if i erase all data. The apple id of which i buy my iphone will appear and mine will not??

If the store setup the phone with an Apple ID/Password, that is not yours, & turned on Find My Phone, then you will need that Apple ID/Password to re-activate the phone. Called Activation Lock. Read here:
http://support.apple.com/kb/PH13695
So, go back to the store where you got this phone & have them fix things.

I have Itunes on my computer, however its an older version and it says I can no longer update it. My problem is im considering buying an Iphone 5, but if it is running on a new version what will happen when I sync it to my itunes account?

I have Itunes on my computer, however its an older version and it says I can no longer update it. My problem is im considering buying an Iphone 5, but if it is running on a new version what will happen when I sync it to my itunes account?

aimzpoo wrote:
I have Itunes on my computer, however its an older version and it says I can no longer update it.
Highly unlikely that it says any such thing.
Try telling us exactly what version of iTunes is installed and what if any messages appears when trying to update it.
What Operating System is the computer running?

What will happen if I restore my iPhone if it hasnt let me back it up?

I tried to back-up my iPhone 3gs but a message came up saying it needed to be updated first. I updated it and now there is a message on the phone screen saying that i need to connect to itunes, however when i try this, its telling me I need to restore my iPhone first. What will happen if I restore it with no way of knowing whether its backed up or not.
Thank you
Panicking!!!!!

Download iTunes into your computer/laptop. Upon iTunes completion, connect your iPhone 3Gs to your computer via USB port. Wait for a minute or 2. iTunes would automatically backup your iPhone without you doing anything. Make sure you're connected to WIFI.
Good luck

What will happen when I install Leopard?

So when leopard comes out in a few weeks and I install it, what will happen to all the files and apps on my computer. Will they be gone? Will I have to redo everything?
This is my first transition on a new OS X. I switched right aftr Tiger came out. What is going to happen?

Fair comment!
If you want the full nine yards:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

What will happen when I quit iphoto during repair?

I force quit my iphoto because the whole computer was running slow.
then when I open it again, it pops out a window asking to repair. I let it repair
but it wasn't really moving and took so long. I was wondering what will happen
if I quit iphoto now?

Make a back up now, so things at least can't get any worse.
Then quit and try again.
If that fails:
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

What will happen if I don't use apple's hdd?

My HDD is passed away.
I'm using Macbook Unibody(A1342) and I will replace the HDD.
I heard that Apple's HDD has a temperature sensor.
So that If I don't use that, it will be a problem, as I heard.
What will happen if I don't use the Apple's HDD?

The tempeture sensor is on the logic board not the hard drive. Apple doesn't make any hard drives they buy them from other manufacturers.
For a new hard drive try Newegg.com
Regular SATA drives http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE Use the list at the left for larger and faster drives.
SSD drives
http://www.newegg.com/Internal-SSD/SubCategory/ID-636?Order=PRICE Use the list at the left for larger and faster drives.
Or OWC for regular hard drives and SSDs http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
To transfer your current hard drive I like the applications Carbon Copy Cloner or SuperDuper. They make a bootable copy of everything on your hard drive. http://www.bombich.com/index.html or http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

I have an old imac 27' with OS 10.7. What will happen with lightroom 6 ?

I have an old imac 27 ' with mac os 10.7.
I try creative cloud and lightroom 5. It works perfectly... But what will happen with lightroom 6 ?

It's pretty simple. Lightroom 6 will not run on OS 10.7. See http://blogs.adobe.com/lightroomjournal/2015/01/update-on-os-support-for-next-version-of-l ightroom.html
You will need to either stay with Lightroom 5, or upgrade your operating system.

What will happen if we try to flow saved entries in SMQ3 to CRM?

Similar Messages

Maybe you are looking for