What will I do I can't use my cellular network already shown?

What will I do I can't use my cellular ....network already shown?

Why do you mean you can't use your cellular? What is actually happening? What error messages are you getting?

Similar Messages

My ipod doesn't turn on and doesn't charge at all.what will i do?can i replace that for free?i just used it for 7 months

my ipod doesn't turn on and doesn't charge at all.what will i do?can i replace that for free?i just used it for 7 months..hope you can help me

See http://support.apple.com/kb/TS3281. I had the same problem, but solved it by holding down the home button and the on/off button for 10 seconds. If you are lucky, that will work for you as well!

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
To answer your questions,
1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
2. Make sure the two iPhones have different names to reduce sync/restore issues.
3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
Let me know if you need any more tips for iPhoning across the pond.

I want to get a Nikon D3100, but my macbook has OS 10.5.5 on it and I've read that the D3100 needs at least 10.6.5. What will happen if I try to use this camera with my computer? Will iPhoto simply not recognize it or will I get distorted pictures, or..?

I want to get a Nikon D3100, but my macbook has OS 10.5.5 on it and I've read that the D3100 needs at least 10.6.5. What will happen if I try to use this camera with my computer? Will iPhoto simply not recognize it or will I get distorted pictures, or....what?

andyBall_uk wrote:
The manual says
❚❚ Supported Operating Systems The supplied software can be used with computers running the following operating systems: • Windows: <snip>
• Macintosh: Mac OS X (version 10.4.11, 10.5.8, 10.6.4)
Nikon say that you need 10.6.5+ for the latest firmware, although I don't see why.
Thanks for that! I was looking for that manual, but for some reason, couldn't find it.
I guess I'll have to contact Nikon and find out what the real story is. The camera was introduced in '08 or '09, so I'm wondering why you'd need software as recent as 10.6.5??
Still very confusing. :-?
Why does it state that the camera is compatible with "10.4.11, 10.5.8..."? Does that mean that anything between 4.11 and 5.8 is incompatible???
BTW, I tried downloading the 10.5.8 combo update recently and got an error message that the update was "corrupted" after it was all downloaded, so I was not able to install that.

What version of Quick books can I use with 10.6.8?

What version of Quick Books can I use with my IMac version 10.6.8?

Contact Intuit to find out. The current version requires Lion 10.7.3 or later. Or you could upgrade OS X:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and

Hi,
What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and T2000s ?
Ushas Symon

It sounds like the customer and server room operator are using a Microsoft/X86 mindset. There are several selling points on using RSCs & SCs. First off are the big 3 that are easy for any good server room operator to understand: cost, space & power. If you don't have to buy a 1U Tripp-lite pull out rack KVM console ($1700) and a video card for each of your SUN servers ($400, yes SUN vid cards are $$$), you start off by saving several thousand dollars.
Next you need to let them know that you require remote access to the systems from your desk and a standard KVM doesn't allow this (with Unix, if you have to get up from your desk then its a hardware problem). They can choose to purchase a network enabled KVM, but that adds $700 to your $1700 KVM. By using the SC you will be able to administer the system remotely.
Third, remember that SUNs do not show all the critical boot information on a frame-buffer console output. If you are in diagnostic mode during boot, the monitor doesn't show results until it completes. If some process is stuck (missing NFS or fibre-channel hard mounts, memory tests, etc) then you need to be able to see it to fix the problem. Plus, console frame-buffers only give you 25 lines of output that you can't scroll back.
The only small hitch is security. The new SCs (on T5220s) have SSH built in, but the older V240s and V490s use telnet which some security people balk at. The solution that we used is to put the older system SCs on a private LAN. Access to that private LAN from our intranet is via a SSH enabled dual-homed (non-routing) workstation with local user accounts. We SSH to that workstation & then telnet to the SC on the relevant server. That solution allows me to access our servers that are 40 miles away, saving response time to solve customer problems. A crude diagram is below:
your workstation------intranet------[dual homed, non-routing workstation]------[inexpensive switch]------[server SC]
Good luck.

What kind of range extender can I use with airport express

WHat kind of range extender can I use with an airport express?

WHat kind of range extender can I use with an airport express?
Use any router that you want if you will be connecting the extender/router back to the AirPort Express using a permanent, wired Ethernet cable connection.
If you are planning to use a wireless connection to extend the range of the network.....then another AirPort Express, AirPort Extreme or Time Capsule will be required.

What Malicious Software Removal Tool can I use for my Mac Book? I need do to do this for a College class.

What Malicious Software Removal Tool can I use for my Mac Book? I need do to do this for a College class.

You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful: The User Tip seeks to offer guidance on the main security threats and how to avoid them.
https://discussions.apple.com/docs/DOC-2435

In Dialog server, what type of work process can I use.

Dear all,
In Dialog server, what type of work process can I use,
Can I use all types like dialog, BTC, U1 and U2 , spool, and enque
regards,
satish

Hi,
you can use dialog, BTC, U1 , U2 and spool
enque must be on only central instance becoz there is no message server on dialog instance
regards,
kaushal

What type of email accounts can be used with MacPro?

What type of email accounts can be used with MacPro?

LJR01 wrote:
The apple consultant at the store rattled off a list of emails that I can use, but I didn't write it down. He said the reason I can't set up my email account is because yahoo is not supported because of pop-up ads.
Well the consultant was wrong. Check out yahoo for yourself if that's what you want to use. http://www.yahoo.com/

We currently have two ipods on my laptop.Last week we purchased another laptop. Both laptops use the same email address. I'm not sure what to do so he can now use his ipod on the new laptop. Please give specific instructions.

We currently have two ipods on my laptop (my laptop Vista). Last week we purchased another laptop(Windows 7). Both laptops use the same email address.I'm not sure what to do so he can now use his ipod on the new laptop. Please give specific instructions.

Copy everything from the old computer to the new one.

What will happen if I don't use apple's hdd?

My HDD is passed away.
I'm using Macbook Unibody(A1342) and I will replace the HDD.
I heard that Apple's HDD has a temperature sensor.
So that If I don't use that, it will be a problem, as I heard.
What will happen if I don't use the Apple's HDD?

The tempeture sensor is on the logic board not the hard drive. Apple doesn't make any hard drives they buy them from other manufacturers.
For a new hard drive try Newegg.com
Regular SATA drives http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE Use the list at the left for larger and faster drives.
SSD drives
http://www.newegg.com/Internal-SSD/SubCategory/ID-636?Order=PRICE Use the list at the left for larger and faster drives.
Or OWC for regular hard drives and SSDs http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
To transfer your current hard drive I like the applications Carbon Copy Cloner or SuperDuper. They make a bootable copy of everything on your hard drive. http://www.bombich.com/index.html or http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

What is package,and how can i use it ?thanks !

what is package,and how can i use it ?
thanks

A package is just a way of organizing your code. You organize the code in directories. For example if you have a package called "package database.util" you should put the Java code in a directory called "database/util/".

What is facetime audio and can I use it to make free international calls between iPhones?

what is facetime audio and can I use it to make free international calls between iphones?

First, check
1. Settings > General > Restrictions: should be OFF > FaceTime: ON?
2. Settings > FaceTime > FaceTime: ON?
ou can be reached by FaceTime at: your phone number?
If all the above are correct, see below:
FaceTime is available with iPhone 4 or latter, except those iPhones that were sold in the Middle East.
Can you tell us which iPhone model that has no FaceTime?

I have two movie credits on my iTunes account. What are credits, and how can I use them?

I have two movie credits on my iTunes account. What are credits, and how can I use them?

You have a Puerto Rico address on your account ? From a quick search I've found one site from somebody in Puerto Rico that includes a screenshot for an app receipt showing tax of 7 cents added to a 99 cent purchase. Are you able to view the purchase history on the account that you've been using, and see what prices show on them (e.g. if the store's listed price or price plus tax) : Store > View Account menu option on a computer's iTunes, then 'see all' link next to the Purchase History section.

What will I do I can't use my cellular network already shown?

Similar Messages

Maybe you are looking for