What Win 7 drivers are required for Satellite L750

Excuse me...
I'm a new Toshiba L750 owner. I can see this (huge) drivers' list, but here there ara ALL TOSHIBA's utilities aswell.
I believe, the fellow asked (as I am), which are the NECCESSARY drivers for a good/working new W7x64 instalation. Personally, I don't want ANY of the Toshiba's utilities. All I want is a "fresh" W7x64 instalation and my laptop running fine. That's all...
So, I don't think we need no more than 10-14 drivers, to set-up fine our laptops.
So, WHICH drivers are needed?

Fellas, listen to me...
When I bought the L750-1LU last Monday, I almost was one step before... throw it out of my window!
The battery didn't last more than... 1 hr - just fooling around the system/utilities and surfing on the Net, nothing extreme - and my boot time was OVER... 30-40 sec (without installing ANYTHING! I had only the official MSW7 and Toshiba's applications)...
Before... throw it out of my window, I chose to collect all the neccessary drivers from the Net and FORMAT the damn thing, re-install a "fresh" MSW7 and "play" with the power settings...
I did it... the laptop now runs like a charm for OVER 3 hrs, the boot time is about... 10 sec and I don't remember when I needed any Toshiba application and I don't have it installed any more!
I don't need an ECO app, I don't want any "Face ID recognize", or any pop-up message from the MILLIONS I had in few minutes, before I formated the laptop.
The following drivers, are those I chose to install. Please, reply me if I'm good:
* Atheros LAN-ETHERNET Driver v1.0.0.46_W7x64_TC70095400D
* Atheros Wireless LAN Driver v9.2.0.206.0.s3264_W7x65_wCAT_TC00346200E
* Conexant Audio Driver v8.51.1.0a_W7x64_TC70107500F
* Intel Chipset Installation Utility v9.2.0.1015_W7x64_TC70095800D
* Intel Display Driver v8.15.10.2291_W7x64_TC70097300J
* Intel Proset Utility v14.0.2.0.1_W7x64_TC00370400B
* Intel PROSet Wireless WiMAX Software v2.3.0.64_W7x64_TC00244800E
* Intel Wireless LAN Driver v14.0.2.2.1.s64_W7x64_wCAT_TC00370300B
* nVIDIA Display Driver v8.17.12.6669_Wx64_TC70096200U
* nVIDIA HD Audio Driver v1.1.13.1_W7x64_TC70096300C
* Realtek Card Reader v1.0.0.12_W7x64_TC70098500J
* Realtek Wireless LAN Driver v2.00.0013_W7x64_TC70102800C
* Synaptics Touchpad Drivers v15.2.11.1_W7x64_TC70097100F
* TOSHIBA Bluetooth Stack_W7x64_TC00354000J (the system saying is fine, but I notised a "yellow triangle" in "My computer" Devices list. I'm keep trying to update or fix but all messages saying "it's fine")
* TOSHIBA Realtek Card Reader v.1.0.0.12_W7x64_TC70098500J
* TOSHIBA Web Camera v1.1.6.3_W7x64_TC30271000C
* USB3.0 Driver v2.0.32.0_W7x64_TC70102900D
So far, I think the laptop "rocks"... All I need from you is to tell me, if I need any other drivers and if I'll be fine with the 3D GRAPHICS & DOBLY ADVANCED TECHNOLOGY of the laptop (if not, which apps I need to install too)?
Thxs.

Similar Messages

What TCP/UDP ports are required for Sunray to communicate withSunray server

Hi,
Our Sunray appliances and Sunray servers are setting in two different VLANs. For there is no ACL applied between both the VLANs, but we are plannin g to place ACL between these two VLAN for security reason. Do any have a list of ports require for Sunrays to communicate with the Sunray server.
Thanks for the Help
Moe Hans
Network Administrator
Kwantlen Polytechnic University
Surrey, BC
[email protected]

[http://wikis.sun.com/display/SRSS4dot2/Ports+and+Protocols]

What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

hai friends
what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
Thanks a lot
Regards
VinayKrishna

Hi Vinay,
1. For DP_PROC_TY you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might have created.
2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
Ragards,
RRK.
Do reward points for useful answers
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

What are the essential services that are required for ensuring server is healthy up ?

Hi All,
Please advise me What are the essential services that are required for ensuring server is healthy up ?
Warm regards,
jk1510

The easiest way to find the Health report of server or workstation follow the below steps which is very much easiest way to get it done
There are a few ways to find this in Windows Server 2008.
First click “Start” and type “Generate a system health report”
Or second navigate your way to the Control Panel choose “System and Security” and choose “Generate a system health report”.
The last is to type “Generate a system health report” into the “Search Control Panel” box in the upper right hand corner of the Control Panel window.
Once armed with this data it’s easier to refute or acknowledge an issue is at hand.
BTW if you’re looking for this same thing in Windows 7 it’s there just buried a bit more.
Search Performance in the Start Menu, choose “Performance Information and Tools”, click “Advanced Tools” from the menu on the left, and finally choose “Generate a system
health report”.
Ref: http://blogs.technet.com/b/rmontee/archive/2012/02/23/generate-a-system-health-report.aspx
Exchange Queries

What SAP modules are required for insuance sector

what SAP modules are required for insuance sector

Hi,
Following authorizations are required to be able to use all the functions of Support Package Manager:
S_CTS_ADMI
S_TRANSPRT
Additional objects required and which can be used to restrict further the functionality are:
S_C_FUNCT
S_CTS_ADMI
S_DATASET
S_GUI
S_RFC
As available in the SAP help,standard SAP S_A.SYSTEM contains all necessary access for importing support packages.
Regards,
Nagendran

What changes are required for OSS note 456507

Hi All,
PLease advise me what changes are required for OSS note 456507 (Assign the function groups QOWK or ORFC in the authorization object S_RFC to tRFC/qRFC users).
Im thinking of just going with the following additions to Role
AAAB Cross Application Auth Objects
S_RFC
Activity 16
Name of RFC - *
Type of RFC - *
But wanted to check what the implications of doing such a thing were, are there any negative points that you can think of opening up the access as above, as opposed to what was suggested in the OSS note?
Your advice would be greatly appreciated.
Thanks in Advance.
Regards,
Sandhya.

Hello Sandhya,
S_RFC is needed in case of making any RFC calls.
Normally it is needed for users that are mentioned in RFC destinations.
As such mostly these users are system/communication users or super users.
Without giving access to function groups through S_RFC successful RFC call can´not be done.
Now the value of field name of RFC can be * but only for those users which are really global super users. In case you need this authorization for any selective functionality as in you case only for function groups QOWK or ORFC then you should try to restrict the access. Negatiity is only that in case of * the authorization access increases but for system or super users you dont need to worry too much really because with system/communication users no one can login and the super users will have sap_all generally. Also their passwords will be a well kept secret so that a miususe can not be made.
By global super users I mean users which are used for various types of activites.
Please award points accordingly.
Regards.
Ruchit.

BODS / SAP : what set-ups are required for communicating with each other ?

Hi.
There is a new SAP system
And there is a new BODS installation.
Both on independent server machines but on the same lan network.
On the test system of BODS. We tried to see how the communication happens with SAP.
While we try some test jobs by trying to pull a simple table on SAP R/3
In Dataflow, we used simple SAPR/3 ABAP flow. And put it into target database thro query transformation.
In the datastore,
We used the Generate and Execute option,
with a path on the local directory of BODS server for creating the ABAP program and the dat file.
However,
We are always getting error on batch job schedule.
Although the user is having rights on the R/3 table
And can login into SAP R/3 system and check the table.
Still we get an error saying Databstore unabel to connect to R/3 system. Check for user login etc.
For anyone whose login we use. We get the error.
However, if i directly generate the code on the ABAP flow (without running the job),
make the program available on R/3 system.
and then run the job as execute preloaded
this works fine without any error.
and we are able to see the data in the target table.
Now both the systems are new.
And am not aware of the initial set-ups which are required for communication between SAP / BODS.
Are WE missing something on the SAP side setups - for generate and execute option to be used?
Is there anything specific to be done for ease of the communication between SAP server and BODS server in this regard.
Can anyone share some inputs on this.
Actually for any user with full admin rights too, on the sap side, if we use the user login for R/3 connectivity for this particular "generate and execute" option, it errors out after nearly 10 minutes. Then the error says, login info not correct.
So basically, the communication channel by itself between SAP R/3 and BODS seems to be locked somewhere.
If anyone with SAP admin expertise - can help or advise on this.
Many thanks
Indu
Edited by: Indumathy Narayanan on Sep 13, 2011 9:20 PM

Getting data out of R/3 requires two distinct setup tasks, and they don't have much to do with each other.
The first basic task is to get the little ABAP extraction programs loaded and run in R/3. You can pre-load them and then call them, or generate, upload, and execute them all on-the-fly, at BODS runtime. During development, use "Generate and Execute" for your ABAP.
Once that's done, you have four different choices to get the data back: "Direct download", "Shared directory", FTP, and "Customer Transfer". Normally, you'll use either FTP or "Shared directory". Refer to the documentation (the BODS SAP Supplement) for a description of all this.
In all cases (or at least, quite certainly, using the FTP and Shared Directory methods), the ABAP extraction programs are directed to plop their output as flat files in the "Working directory on SAP server." For testing, you can look in that folder to see if any flat files are appearing when you submit an ABAP data flow. If not, then either 1) your ABAP program isn't getting in there (a Basis admin should be able to tell you), or 2) it's not running (ditto), or 3) it's running but unable to generate the output file (ditto), because a) SAP isn't permitted to write to that folder, or b) the folder doesn't exist (it needs to be defined from the perspective of the SAP server).
If you do see files appear in the "Working directory on SAP server" when you run a BODS job w/ an ABAP dataflow, then the problem is that BODS can't fetch them. If you're using the "Shared directory" method, which is suitable for and often used in all-Windows environments, then the account under which the Job Server in question is running must have access to the "Working directory on SAP server," but this time from the perspective of the Job Server. So if, for instance, SAP was directed to put the flat files on a local folder, say, "E:\USR\SAP\BODS", then you might want to share this folder out as, for instance,
sapdev1\bods (for an SAP host called "sapdev1"), and then enter "
sapdev1\bods" in the "Application path to shared directory" field, in your SAP datastore configuration. If your Job Server service is logging-in as "Local System," though, it won't be able to get there -- it needs to log-in as an AD domain account w/ rights to that share. Get it? Try logging in to your BODS job server computer with the AD "service account" setup for use by the Job Server service, and try to open a file on the "Application path to shared directory". If you can't, then BODS won't be able to get data from ECC, either. FTP works similarly -- if you're using that and having trouble, please re-post.
Best wishes,
Jeff Prenevost
Data Services Practice Manager
itelligence

Do anyone knows drivers installation order for Satellite A660-11M

Do anyone knows the drivers installation order for Satellite a660-11m?
I've got some issue installing Win 7 pro (wlan do not work properly,
freezing few minutes after laptop startup, unabling to run CHKDSK on C:).
Reading this forum it seems to me these aren't new issues for Toshiba users.

Hi, friends.
I've installed the the Flash Card Support Utility. In effect, now the function keys work. ;) <img class="emoticon" border="0" alt="" />
Unfortunately it seems that problems are hard to die. The Laptop, in fact, keeps freezing, tipically but not exclusively, after resuming from suspension due to lid closing. System can stucks during windows login or after a while that user is logged on.
During these days i've discovered that SPTD.exe x64 v.1.74 (Daemon Tools) and Nod32 x64 makes impossible launching chkdsk on %SystemDrive% (countdown stucked on 1 and hdd led blinked with very short ON state). However, even without installing those, it seems that one is not able to break the countdown (that windows shows before it starts chkdsk) pressing a key.
But maybe I should open a new topic for talcking about this.

Which parameters are required for generating a solution manager key?

Hello All,
I generated a key in Solution Manager, to install a SAP NW 2004s SR1.
But I receive an error during the installation from the SAPINST:
"SAP Solution manager key for the instance number... is invalid ".
I already changed the parameters for generating the key, changed the instance number, hostname, but I still receive the same error.
Could someone tell me which parameters exactly are required for generating a solution manager key?
thanks
Thomas

Dear Sri,
this is exactly what I have entered, I still get the same error message.
My entries in SAPINST:
SAPinst founds one system instance on the host with
the Instance number 00,
the Instance name SCS00.
And ask for the Central Instance parameters:
there I enter 01 for the central Instance number,
the hostname
and the solution manager key generated for the instance number 01!
best regards
Thomas

Which sharepoint service applications & services are required for Project server 2013 to work fine.

HI,
Can any one help me,
I am planning to install project server 2013, what are the service applications and Services ( Manage services on server in central admin ) in sharepoint are required for project server 2013 to work fine, so that i will run only service
application and services to increase server performance..i don't want to configure all service applications when i am configuring.
Thanks in Advance..
vijay kommireddi

Hi Vijay,
If you are installing Project Server on SharePoint farm, You need to start the service Project Application Service which would be available after you install project Server 2013.
For Project Server Reporting you need to start Excel service and Secure Store service.
http://technet.microsoft.com/en-us/library/ee662106(v=office.15).aspx
Thanks,
Phani

What is the minimum browser requirements for Captivate 5? (Specifically Flash and Java)

I create a Captivate from and upload it to our LMS. When employees access the course it takes a long time for it to load. My IT department is asking what is the minimum browser requirements for Captivate 5? Specifically Flash and Java. This is occuring on PC's and a Citrix environment.

Hi there,
Thanks for reaching Adobe Community. Please accept my apologies for the same.
There is nothing in specific. When you say it takes a long time, do you mean on the LMS or locally as well?
Try updaing the Flash Player.
You can download the Falsh Player Versions from the below link:
http://www.adobe.com/support/flashplayer/downloads.html
Which browser you are using?
Also what objects you have in your project?
Does it have widgets or heavier graphics?
Also are you using any particular preloader? Have you tried using the default.swf preloader?
Thanks!

Zen V Plus Not Connected. Saying No drivers are installed for this devi

Hi,?Recently purchased a zen v+ and thought i'd gotten a good mp3 player.got home, charged the player. installed software and got excited to start putting songs on and listening to?it. plugged it in the usb slot and BAM!?"USB device not recognized" so i went into control panel/system/hardware/devicemanager then clicked on uni'versal serial bus controllers and noticed a "unknown device". so i right clicked it and went properties and its saying No drivers are installed for this device. so i went to the driver tab and clicked on driver details and a window popped up saying no drivers are required or are loaded for this device.. then i came to the support page and had a look at some posts and came across http://us.creative.com/support/kb/article.asp?l=2&sid=9287?i read and followed the instructions word for word and still didnt help. went to the creative support downloads page and thought maybe i could download and re-install the drivers for my zen v+ but they had no downloads that related to drivers. Before contacting creative i thought i would come on here and find out if anyone can help.is there a site? or can someone give me a site so i can download the latest drivers for my zen v, i've tried installing them off the cd and it says no new devices found. any help would be greatfully appreciated..thanks for your timebrett?

Hi,
I had a similar problem, try this site
http://blogs.microsoft.nl/tonykrijnen/archi've/2004/2/28/59.aspx
For the English people among us:
Choose Start
Choose Run
Type REGEDIT en geef ENTER
Open:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
With right mouse ENUM and choose Permissions.
Check if there is a group EVERYONE with a 'v' on READ
The same for USB (under ENUM). If the group everybody is not there, create one.
Angele

I recently updated to the latest version of iTunes and now get a message saying 'Registry settings for iTune drivers are misng for Cd burning' I have uninstallled and reinstalled iTunes and tried everything to repair the problem but still have no optical

I am using OS 64 bit Windows Vista Home Premium and recently updated the latest version of iTunes. (I only have this CD burning software on my Laptop). Ever since updating, I received the message 'Registry settings for the iTune drivers are missing for CD burning'. The drivers for Lower and uppper filters in the registry are missingand I now have no optical drive. I have unistalled and reinstalled Itunes and manually entered the filters. Have tried everything including something called GEAR driver installer which was suggested on several technical sites. Everything was working fine in iTunes until I updated it.. It's strange I can still import music but not burn?? Friend s have told me they have ha dthe same problem when updating iTunes but resolved the problem by uninstalling/reinstalling or altering registry keys.
Today I went to use my Epson Printer and now have problems with it not working. I decided to uninstall/ install printer software and still can't get it to work either. I may be wrong but his all seems connected to me?
I have been trying for days to get telephone support and been told today you have to pay
Please can someone help me before I throw the lot out the window!!!!

Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help

I am a male, and am looking at buying an ipod touch 5, i do not know what color i should get, does anyone have any suggestions on what ipod touch colors are best for guys

I am a guy and i am looking at buying an ipod touch 5, i do not know what color i should get, does anyone have any suggestions on what ipod touch colors are best for guys?

The Product Red model

What kind if tables are suitable for partitioning?

What kind of tables are suitable for partitioning?
I have several tables in same schema. Each of them is bigger than 200MB. DML commands are executed continuously against these tables. After diagnosis, I know than the sequential read wait is the root cause. Should I partition each of them?
Edited by: jetq on Jul 16, 2009 8:04 PM

jetq wrote:
What kind of tables are suitable for partitioning?The question to answer your question is: What will be gained by partitioning and why? When you understand this, then you can decide if it is suitable for partitioning.
BTW sequential read wait has to do with index scans, not table scans. Table scan waits are reported as scattered reads, not sequential.
Regards,
Greg Rahn
http://structureddata.org

What Win 7 drivers are required for Satellite L750

Similar Messages

Maybe you are looking for