What windows system services are needed for iTunes 12

I recently installed the update for iTunes on my PC.  Something happened near the end of the process:  a dialog box popped up telling me that some of the Windows services were missing from my computer.  I was given three (3) choices: cancel / retry / ignore.  I first tried retry and that didn't work, so I clicked on the ignore option and the installation finished.
Now, I think the missing Windows 7 (64-bit) service was the "Apple Mobile Device" Service.  Unfortunately, I failed to write down exactly what the dialog box said, so there could be other services missing from my computer.  And since I have no way to know when the service/s was/were lost a system restore will not work.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Similar Messages

  • What Specific Firewall Rules are Needed for the DPM Server?

    Hello,
    We want to confirm which firewall ports need to be opened on the DPM server (not protected servers) for all DPM processes, so that we can set these rules in group policy. Below are what we
    think are the needed rules. Note that we have rules for both new DPM 2012 installs and upgrades from DPM 2010 to 2012, since these use different program paths.
    Rule Name
    Program Path
    Protocol
    Local Port
    DPM 2012 DCOM Port
    Any
    TCP
    135
    DPM 2012 AM Port
    Any
    TCP
    6075
    DPM 2012 RTM Agent Coordinator
    C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\AC\4.0.1908.0\dpmac.exe
    Any
    Any
    DPM 2012 SP1 Agent Coordinator
    C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\AC\4.1.3313.0\dpmac.exe
    Any
    Any
    DPM 2012 R2 Agent Coordinator
    C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\AC\4.2.1205.0\dpmac.exe
    Any
    Any
    DPM 2012 AM Service Host (New Install
    %ProgramFiles%\Microsoft System Center 2012\DPM\DPM\bin\AMSvcHost.exe
    Any
    Any
    DPM 2012 AM Service Host (Upgrade Install)
    %ProgramFiles%\Microsoft DPM\DPM\bin\AMSvcHost.exe
    Any
    Any
    DPM 2012 DPM AM Service (New Install)
    %ProgramFiles%\Microsoft System Center 2012\DPM\DPM\bin\DPMAMService.exe
    Any
    Any
    DPM 2012 DPM AM Service (Upgrade Install)
    %ProgramFiles%\Microsoft DPM\DPM\bin\DPMAMService.exe
    Any
    Any
    DPM 2012 MSDPM (New Install)
    %ProgramFiles%\Microsoft System Center 2012\DPM\DPM\bin\msdpm.exe
    Any
    Any
    DPM 2012 MSDPM (Upgrade Install)
    %ProgramFiles%\Microsoft DPM\DPM\bin\msdpm.exe
    Any
    Any
    DPM 2012 DPMRA (New Install)
    %ProgramFiles%\Microsoft System Center 2012\DPM\DPM\bin\DPMRA.exe
    Any
    Any
    DPM 2012 DPMRA (Upgrade Install)
    %ProgramFiles%\Microsoft DPM\DPM\bin\DPMRA.exe
    Any
    Any
    Questions:
    Are any of these rules not needed?
    We know the Agent Coordinator rules are needed on protected servers. Are they also needed on the DPM server (including if we use secondary DPM servers)?
    The DPM Configuring Firewalls TechNet page says DCOM uses TCP 135 and the RPC Dynamic ports. Does that mean we also need a rule that opens all TCP RPC Dynamic ports for
    any program? Or is this not necessary since we have rules for msdpm.exe and dpmra.exe? Reference:
    http://technet.microsoft.com/en-us/library/hh757794
    What other rules may be missing, if any?
    Note that we do not include rules for ports 53 (DNS), 88 (Kerberos), 389 (LDAP), 137-139 & 445 (NetBIOS) because we already open these ports in other group policy objects.
    Also, the below forums post says two exceptions for SQL Server are needed on the DPM server to allow the Remote Administrator console to work. Is there any documentation in the DPM TechNet site on these rules?
    http://social.technet.microsoft.com/Forums/en-US/aa88fd00-6836-46d3-8a93-edb487109118/dpm-2012-remote-administration?forum=dataprotectionmanager
    Thanks,
    -Taylorbox

    Does anyone have any comments on this post? We would especially appreciate some input from Microsoft reps to help us ensure we're setting up the correct firewall rules.
    Thanks,
    -Taylorbox

  • What type of storage is needed for iTunes U

    We are getting up and running iTunes U on our University and we are running into the issue of what type of storage we need to provide for iTunes U, i.e. (web share, afp share, smb share. If you could let me know or point me in the direction i need to go it would be greatly appreciated.
    Thanks,
    Scott

    Hi Scott,
    The [administraton guide|http://deimos.apple.com/rsrc/doc//iTunesUAdministrationGuide/Introduction /chapter1_section1.html] doesn't explicitly state what type of server is necessary, but given that iTunes U is based on RSS feeds, a Web server would be a good choice for hosting your content (much like hosting any podcast).
    Hope this helps,
    Shawn

  • HT1386 What file beside usbaapl is needed for Itunes to recognize my Iphone?

    I tried to install to latest update for the iOS and my Iphone 3gs is now a small black brick. My computer recognizes the phone as being in recovery mode. I have reinstalled Itunes twice now figuring the usbaapl file is corrupted. Same issue. what other file may be missing?

    You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/welcome I'll request that Apple relocate your post.
    Most of these links for iPads are also applicable to iPhones.
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    windows 8.1 itunes wont recognize ipad
    https://discussions.apple.com/thread/5697247?start=0&tstart=0
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
    Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices
    http://osxdaily.com/2013/02/17/wi-fi-sync-not-working-fix-ios/
     Cheers, Tom

  • What megapixel size shots are needed for a calendar?

    I have a Canon that shoots 3.2 megapixel shots, 2048 x 1536, and when I place these in single, double or even triple layout pages I get a yellow exclamation mark and this message over the photo: "This photo may print at too low a quality."
    What size images does Apple expect us to have for their calendar pages? Is there a chart that lists the size of images for all the layouts (single image through to seven images)?
    Do I need a new camera?
    Many thanks, Mike

    Mike:
    I've ordered calendars with photos from a camera with a max pixel size of 1600 x 1200 and was very happy with the results. iPhoto's print warning is set at 140 dip (not sure if it's for ordering prints or items other than books which is 180.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • HT1567 I keep getting a pop up window saying that whatever is needed for itunes to burn a CD for me is missing.  How do I get it without having my entire library erased?

    I keep getting a pop up window saying that whatever is needed for itunes to burn a CD for me is missing.  How do I get it without having my entire library erased?

    Hello,
    I am having problems copying my music to a cd, its stating disc recording not found.  Please how can this be fixed.  I have uninstall and reinstall several times.
    Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
    Hewlett-Packard 310-1126
    iTunes 11.0.1.12
    QuickTime not available
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver 1.63.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0027B2E0106D35F0
    Current user is not an administrator.
    The current local date and time is 2013-01-31 18:45:45.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 4270 
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.0.1.12 (x64) is currently running.
    iTunesHelper 11.0.1.12 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    LowerFilters: PxHlpa64 (2.0.0.0),
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.

  • What technical components are needed for integration of SAP BI and BO?

    Hello,
    What technical components are needed for integration of SAP BI and BO?

    Hi,
    you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
    In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
    Please take again a look at the following link for more detailed information (from Ingo) on this:
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
    Regards,
    Stratos

  • Itunes won't install. I get a message stating "apple mobile device failed to start. Verify that you have sufficient priveleges to start system services. I had itunes on this laptop and an urgrade came. Now nothing. Windows7, 64 bit

    itunes won't install. I get a message stating "apple mobile device failed to start. Verify that you have sufficient priveleges to start system services. I had itunes on this laptop and an urgrade came. Now nothing. Windows7, 64 bit

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Which files are needed for connection to database in 11gR2?

    I'm confused about the following files:
    sqlnet.ora
    tnsnames.ora
    listener.ora
    host file
    If I understand correctly, sqlnet.ora and tnsnames.ora can exist in both client and Oracle database server and listener.ora should only exist in Oracle database server. I guess host file can exist in both client and Oracle database server.
    I'm trying to understand which of the files are needed to access Oracle 11gR2 database using different tools such as
    sqlplus, SQL Developer, and Database Control on Oracle database server or from a client machine.
    If I'm on an Oracle database server, which of the files are needed for accessing 11gR2 database on that server for the different tools?
    If I'm on a client machine, which of the files are needed for accessing 11gR2 database on an Oracle database server for the different tools?

    881656 wrote:
    I'm confused about the following files:
    sqlnet.ora
    tnsnames.ora
    listener.ora
    host file
    If I understand correctly, sqlnet.ora and tnsnames.ora can exist in both client and Oracle database server and listener.ora should only exist in Oracle database server. I guess host file can exist in both client and Oracle database server.
    I'm trying to understand which of the files are needed to access Oracle 11gR2 database using different tools such as
    sqlplus, SQL Developer, and Database Control on Oracle database server or from a client machine.
    If I'm on an Oracle database server, which of the files are needed for accessing 11gR2 database on that server for the different tools?
    If I'm on a client machine, which of the files are needed for accessing 11gR2 database on an Oracle database server for the different tools?sqlnet.ora is used to configure the actions of sqlnet on whatever machine. Some of the config parms available to it apply only to the server side, some apply only to the client side, some apply to both.
    tnsnames.ora is used by client processes to resolve a connect alias to a specicific host, port, and service. It is used ONLY by the client side of tns. You see it on host machines because those machines can also run client processes.
    host file. Oracle doesn't know what this file is. Oracle doesn't give a flying fig about this file. It is used by the standard network software in the OS to resolve a name to an IP address. The only reason you even see it discussed in the Oracle world is because Oracle TNS sits on top of the standard OSI network stack, and uses it. Thus, if your tnsnames file has an entry like:
    houston =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = vmlnx01)(PORT = 1521))
        (CONNECT_DATA =
          (SERVICE_NAME = houston)
    #==========tns will never know or care where vmlnx01 is. The request will be packaged and sent to the standard network stack with a request to "route this package to vmlnx01, wherever that is.". The OS network stack will then resolve 'vmlnx01' to an ip address, by one of several possible methods. ONE of those methods is to look it up in the local hosts file.

  • What kind of cert is needed for Client to MP/DP communication.

    Hi, 
    What kind of Certificate is needed for Client to DP/MP communication?   I know what the documentation says about setting up a Client cert and setting up auto enroll however, we are not able to setup auto enroll in a couple domains so we are trying
    to figure out how to get certs on these other machines.
    Will any cert listed in the personal store of the Client and the MP/DP work? 
    How does Config Manager pick the cert it needs to use for this on the CLient side and MP side?
    Thanks in advance.
    Thanks Lance

    We manually created a cert for a machine using the Config Manager Client template.   THis was the same template used to create the config manager client cert that we installed on the site system.
    So both the Config Manager server and Client have a cert created with this template (and therefore show the same template id).
    The client and config manager server have root certificate in the trusted root store from the same CA.
    in our ccmmessaging.log file on the client we get the following error.
    Certificate [Thumbprint ksdjfskfjdsfksjfskdfjskdjfskjfskdjfklsjdfslkfjdslkf] issued to 'machinename' doesn't have private key or caller doesn't have access to private key.
    in the certificates MMC it shows for the certificate with the above thumbprint..
    you have a private key that corresponds to this certificate.
    What are we missing?
    Thanks Lance

  • What levels of Acrobat are needed to use forms created in Acrobat Pro 9?

    What levels of Acrobat are needed to use forms created in Acrobat Pro 9? I want to use my form as a job ticket but want to know what levels of adobe reader are needed for the end users to be able to fill out & submit the forms without any problems.

    Reader 7 and higher should be able to fill out forms and submit if the pdf format allows Reader 7 to fill out the form. However, without problems is a different issue. Submission of forms via email is ALWAYS a problem. It is always better to post the form on a website and have the form filled out on the web and have the data stored or sent to a database for further action.

  • What Windows 8 Should i Buy for Bootcamp?

    I do not have a windows OS of any kind installed on my mac. I would like to get windows 8 for my mac from amazon.co.uk .
    Windows 8 Pro, Upgrade Edition [Upgrade from Windows XP, Windows Vista, Windows 7] (PC)- this is the main one that pops up but its an upgrade??
    When i search windows 8 on amazon.co.uk and on other sites the only products i see are upgrades from older versions, but i dont have any older versions of the Windows OS installed on my computer. So to cut a long story short, what windows 8 should i buy for bootcamp. Please could you provide a link, preferbly amazon or if not a UK website.
    Thanks.

    Here are a few links I could find that are aparently the full install not an upgrade. I'd check with the seller to be sure though.
    http://www.jr.com/microsoft/pe/MSI_8PR64B1PK/
    http://www.softwareking.com/WIN8.html?gclid=CNTc4t7nprMCFQ2znQod0nQA6Q
    http://www.newegg.com/Product/Product.aspx?Item=N82E16832416552&Tpk=32-416-552
    http://www.newegg.com/Product/Product.aspx?Item=N82E16832416550&Tpk=32-416-550

  • What operating system do you need to run AirPort Management Utility v1 ?

    What operating system do you need to run AirPort Management Utility v1 ?
    TIA,
    John.

    Not sure what's not working for you with the AirPort Management Utility, but the following Apple article describes some missing functionality with OS X 10.2.x clients. (ref: http://docs.info.apple.com/article.html?artnum=107940)

  • What compressor settings settings are best for 1080i  to output to DVD using DVD Studio pro?

    What compressor settings settings are best for 1080i  to output to DVD using DVD Studio pro? I used FCP 6, exported using Quick Time.

    DVDs are only SD. There was at one time HD-DVDs, which DVD SP and Compressor can make, but HD-DVDs will only play in Macs and, now obsolete HD-DVD players. HD-DVDs will not play back in standard DVD players or Blu-Ray players. If you want to make a "DVD will be played on DVD player for TV" disc, your only choice is SD.
    If you want HD video on a disc, then you want Blu-Ray. You will need a Blu-Ray burner (Apple does not make a Blu-Ray burner so you will have to buy a third-party Blu-Ray burner), Blu-Ray discs and software that will make a Blu-Ray disc. That could be the latest version of Compressor, or FCPX, or Toast, or Encore.

  • What programs or apps are  needed to transform photos into drawings?

    What programs or apps are needed to transform photos into drawings, and then send back and forth to the iPad2?

    http://itunes.apple.com/us/app/photosketcher/id463633845?mt=12

Maybe you are looking for